| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A small series for fixing a problem with Xen PVH guests when running
as backends (e.g. as dom0).
Mapping other guests' memory is now working via ZONE_DEVICE, thus not
requiring to abuse the memory hotplug functionality for that purpose"
* tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: add helpers to allocate unpopulated memory
memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC
xen/balloon: add header guard
|
|
This is in preparation for the logic behind MEMORY_DEVICE_DEVDAX also
being used by non DAX devices.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: https://lore.kernel.org/r/20200901083326.21264-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When calling __generic_fsdax_supported(), a dax-unsupported device may
not have dax_dev as NULL, e.g. the dax related code block is not enabled
by Kconfig.
Therefore in __generic_fsdax_supported(), to check whether a device
supports DAX or not, the following order of operations should be
performed:
- If dax_dev pointer is NULL, it means the device driver explicitly
announce it doesn't support DAX. Then it is OK to directly return
false from __generic_fsdax_supported().
- If dax_dev pointer is NOT NULL, it might be because the driver doesn't
support DAX and not explicitly initialize related data structure. Then
bdev_dax_supported() should be called for further check.
If device driver desn't explicitly set its dax_dev pointer to NULL,
this is not a bug. Calling bdev_dax_supported() makes sure they can be
recognized as dax-unsupported eventually.
Fixes: c2affe920b0e ("dax: do not print error message for non-persistent memory block device")
Cc: Jan Kara <jack@suse.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-and-tested-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20200903161625.19524-1-colyli@suse.de
|
|
Commit 231609785cbf ("dax: print error message by pr_info()
in __generic_fsdax_supported()") happens to print the following
error message during booting when the non-persistent memory block
devices are configured by device mapper. Those error messages are
caused by the variable 'dax_dev' is NULL. Users might be confused
with those error messages since they do not use the persistent
memory device. Moreover, users might scare about "what's wrong
with my disks" because they see the 'error' and 'failed' keywords.
# dmesg | grep fail
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 1.1T 0 disk
├─sda1 8:1 0 156M 0 part
├─sda2 8:2 0 40G 0 part
└─sda3 8:3 0 1.1T 0 part
sdb 8:16 0 1.1T 0 disk
├─sdb1 8:17 0 600M 0 part
├─sdb2 8:18 0 1G 0 part
└─sdb3 8:19 0 1.1T 0 part
├─rhel00-swap 254:3 0 4G 0 lvm
├─rhel00-home 254:4 0 1T 0 lvm
└─rhel00-root 254:5 0 50G 0 lvm
sdc 8:32 0 1.1T 0 disk
sdd 8:48 0 1.1T 0 disk
sde 8:64 0 1.1T 0 disk
sdf 8:80 0 1.1T 0 disk
sdg 8:96 0 1.1T 0 disk
sdh 8:112 0 3.3T 0 disk
├─sdh1 8:113 0 500M 0 part /boot/efi
├─sdh2 8:114 0 40G 0 part /
├─sdh3 8:115 0 2.9T 0 part /home
└─sdh4 8:116 0 314.6G 0 part [SWAP]
sdi 8:128 0 1.1T 0 disk
sdj 8:144 0 3.3T 0 disk
├─sdj1 8:145 0 512M 0 part
└─sdj2 8:146 0 3.3T 0 part
sdk 8:160 0 119.2G 0 disk
├─sdk1 8:161 0 200M 0 part
├─sdk2 8:162 0 1G 0 part
└─sdk3 8:163 0 118G 0 part
├─rhel-swap 254:0 0 4G 0 lvm
├─rhel-home 254:1 0 64G 0 lvm
└─rhel-root 254:2 0 50G 0 lvm
sdl 8:176 0 119.2G 0 disk
The call path is shown as follows:
dm_table_determine_type
dm_table_supports_dax
device_supports_dax
generic_fsdax_supported
__generic_fsdax_supported
With the disk configuration listing from the command 'lsblk',
the member 'dev->dax_dev' of the block devices 'sdb3' and 'sdk3'
(configured by device mapper) is NULL in function
generic_fsdax_supported() because the member is configured in
function open_table_device().
To prevent the confusing error messages in this scenario (this is
normal behavior), just print those error messages by pr_debug()
by checking if dax_dev is NULL and the block device does not support
DAX.
Link: https://lore.kernel.org/r/20200819154236.24191-1-adrianhuang0701@gmail.com
Fixes: 231609785cbf ("dax: print error message by pr_info() in __generic_fsdax_supported()")
Cc: Coly Li <colyli@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updayes from Vishal Verma:
"You'd normally receive this pull request from Dan Williams, but he's
busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
this cycle.
This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
and a few small cleanups and fixes in libnvdimm and DAX. I'd
originally intended to make separate topic-based pull requests - one
for libnvdimm, and one for DAX, but some of the DAX material fell out
since it wasn't quite ready.
Summary:
- add 'Runtime Firmware Activation' support for NVDIMMs that
advertise the relevant capability
- misc libnvdimm and DAX cleanups"
* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
libnvdimm/security: the 'security' attr never show 'overwrite' state
libnvdimm/security: fix a typo
ACPI: NFIT: Fix ARS zero-sized allocation
dax: Fix incorrect argument passed to xas_set_err()
ACPI: NFIT: Add runtime firmware activate support
PM, libnvdimm: Add runtime firmware activation support
libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
drivers/dax: Expand lock scope to cover the use of addresses
fs/dax: Remove unused size parameter
dax: print error message by pr_info() in __generic_fsdax_supported()
driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
tools/testing/nvdimm: Emulate firmware activation commands
tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
tools/testing/nvdimm: Add command debug messages
tools/testing/nvdimm: Cleanup dimm index passing
ACPI: NFIT: Define runtime firmware activation commands
ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
libnvdimm: Validate command family indices
|
|
The addition of PKS protection to dax read lock/unlock will require that
the address returned by dax_direct_access() be protected by this lock.
Correct the locking by ensuring that the use of kaddr and end_kaddr
are covered by the dax read lock/unlock.
Link: https://lore.kernel.org/r/20200717072056.73134-12-ira.weiny@intel.com
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
In struct dax_operations, the callback routine dax_supported() returns
a bool type result. For false return value, the caller has no idea
whether the device does not support dax at all, or it is just some mis-
configuration issue.
An example is formatting an Ext4 file system on pmem device on top of
a NVDIMM namespace by,
# mkfs.ext4 /dev/pmem0
If the fs block size does not match kernel space memory page size (which
is possible on non-x86 platform), mount this Ext4 file system will fail,
# mount -o dax /dev/pmem0 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/pmem0,
missing codepage or helper program, or other error.
And from the dmesg output there is only the following information,
[ 307.853148] EXT4-fs (pmem0): DAX unsupported by block device.
The above information is quite confusing. Because definitely the pmem0
device supports dax operation, and the super block is consistent as how
it was created by mkfs.ext4.
Indeed the failure is from __generic_fsdax_supported() by the following
code piece,
if (blocksize != PAGE_SIZE) {
pr_debug("%s: error: unsupported blocksize for dax\n",
bdevname(bdev, buf));
return false;
}
It is because the Ext4 block size is 4KB and kernel page size is 8KB or
16KB.
It is not simple to make dax_supported() from struct dax_operations
or __generic_fsdax_supported() to return exact failure type right now.
So the simplest fix is to use pr_info() to print all the error messages
inside __generic_fsdax_supported(). Then users may find informative clue
from the kernel message at least.
Message printed by pr_debug() is very easy to be ignored by users. This
patch prints error message by pr_info() in __generic_fsdax_supported(),
when then mount fails, following lines can be found from dmesg output,
[ 2705.500885] pmem0: error: unsupported blocksize for dax
[ 2705.500888] EXT4-fs (pmem0): DAX unsupported by block device.
Now the users may have idea the mount failure is from pmem driver for
unsupported block size.
Link: https://lore.kernel.org/r/20200725162450.95999-1-colyli@suse.de
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anthony Iliopoulos <ailiopoulos@suse.com>
Reported-by: Michal Suchanek <msuchanek@suse.com>
Suggested-by: Jan Kara <jack@suse.com>
Reviewed-by: Jan Kara <jack@suse.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
Just use bd_disk->queue instead.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, when adding memory, we create entries in /sys/firmware/memmap/
as "System RAM". This will lead to kexec-tools to add that memory to the
fixed-up initial memmap for a kexec kernel (loaded via kexec_load()). The
memory will be considered initial System RAM by the kexec'd kernel and can
no longer be reconfigured. This is not what happens during a real reboot.
Let's add our memory via add_memory_driver_managed() now, so we won't
create entries in /sys/firmware/memmap/ and indicate the memory as "System
RAM (kmem)" in /proc/iomem. This allows everybody (especially
kexec-tools) to identify that this memory is special and has to be treated
differently than ordinary (hotplugged) System RAM.
Before configuring the namespace:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-33fffffff : namespace0.0
3280000000-32ffffffff : PCI Bus 0000:00
After configuring the namespace:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
148200000-33fffffff : dax0.0
3280000000-32ffffffff : PCI Bus 0000:00
After loading kmem before this change:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : dax0.0
150000000-33fffffff : System RAM
3280000000-32ffffffff : PCI Bus 0000:00
After loading kmem after this change:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : dax0.0
150000000-33fffffff : System RAM (kmem)
3280000000-32ffffffff : PCI Bus 0000:00
After a proper reboot:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
148200000-33fffffff : dax0.0
3280000000-32ffffffff : PCI Bus 0000:00
Within the kexec kernel before this change:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : System RAM
3280000000-32ffffffff : PCI Bus 0000:00
Within the kexec kernel after this change:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
148200000-33fffffff : dax0.0
3280000000-32ffffffff : PCI Bus 0000:00
/sys/firmware/memmap/ before this change:
0000000000000000-000000000009fc00 (System RAM)
000000000009fc00-00000000000a0000 (Reserved)
00000000000f0000-0000000000100000 (Reserved)
0000000000100000-00000000bffdf000 (System RAM)
00000000bffdf000-00000000c0000000 (Reserved)
00000000feffc000-00000000ff000000 (Reserved)
00000000fffc0000-0000000100000000 (Reserved)
0000000100000000-0000000140000000 (System RAM)
0000000150000000-0000000340000000 (System RAM)
/sys/firmware/memmap/ after a proper reboot:
0000000000000000-000000000009fc00 (System RAM)
000000000009fc00-00000000000a0000 (Reserved)
00000000000f0000-0000000000100000 (Reserved)
0000000000100000-00000000bffdf000 (System RAM)
00000000bffdf000-00000000c0000000 (Reserved)
00000000feffc000-00000000ff000000 (Reserved)
00000000fffc0000-0000000100000000 (Reserved)
0000000100000000-0000000140000000 (System RAM)
/sys/firmware/memmap/ after this change:
0000000000000000-000000000009fc00 (System RAM)
000000000009fc00-00000000000a0000 (Reserved)
00000000000f0000-0000000000100000 (Reserved)
0000000000100000-00000000bffdf000 (System RAM)
00000000bffdf000-00000000c0000000 (Reserved)
00000000feffc000-00000000ff000000 (Reserved)
00000000fffc0000-0000000100000000 (Reserved)
0000000100000000-0000000140000000 (System RAM)
kexec-tools already seem to basically ignore any System RAM that's not on
top level when searching for areas to place kexec images - but also for
determining crash areas to dump via kdump. Changing the resource name
won't have an impact.
Handle unloading of the driver after memory hotremove failed properly, by
duplicating the string if necessary.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/20200508084217.9160-5-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "vfs: have syncfs() return error when there are writeback
errors", v6.
Currently, syncfs does not return errors when one of the inodes fails to
be written back. It will return errors based on the legacy AS_EIO and
AS_ENOSPC flags when syncing out the block device fails, but that's not
particularly helpful for filesystems that aren't backed by a blockdev.
It's also possible for a stray sync to lose those errors.
The basic idea in this set is to track writeback errors at the
superblock level, so that we can quickly and easily check whether
something bad happened without having to fsync each file individually.
syncfs is then changed to reliably report writeback errors after they
occur, much in the same fashion as fsync does now.
This patch (of 2):
Usually we suggest that applications call fsync when they want to ensure
that all data written to the file has made it to the backing store, but
that can be inefficient when there are a lot of open files.
Calling syncfs on the filesystem can be more efficient in some
situations, but the error reporting doesn't currently work the way most
people expect. If a single inode on a filesystem reports a writeback
error, syncfs won't necessarily return an error. syncfs only returns an
error if __sync_blockdev fails, and on some filesystems that's a no-op.
It would be better if syncfs reported an error if there were any
writeback failures. Then applications could call syncfs to see if there
are any errors on any open files, and could then call fsync on all of
the other descriptors to figure out which one failed.
This patch adds a new errseq_t to struct super_block, and has
mapping_set_error also record writeback errors there.
To report those errors, we also need to keep an errseq_t in struct file
to act as a cursor. This patch adds a dedicated field for that purpose,
which slots nicely into 4 bytes of padding at the end of struct file on
x86_64.
An earlier version of this patch used an O_PATH file descriptor to cue
the kernel that the open file should track the superblock error and not
the inode's writeback error.
I think that API is just too weird though. This is simpler and should
make syncfs error reporting "just work" even if someone is multiplexing
fsync and syncfs on the same fds.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20200428135155.19223-1-jlayton@kernel.org
Link: http://lkml.kernel.org/r/20200428135155.19223-2-jlayton@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Assume we have kmem configured and loaded:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory$
140000000-1481fffff : namespace0.0
150000000-33fffffff : dax0.0
150000000-33fffffff : System RAM
Assume we try to unload kmem. This force-unloading will work, even if
memory cannot get removed from the system.
[root@localhost ~]# rmmod kmem
[ 86.380228] removing memory fails, because memory [0x0000000150000000-0x0000000157ffffff] is onlined
...
[ 86.431225] kmem dax0.0: DAX region [mem 0x150000000-0x33fffffff] cannot be hotremoved until the next reboot
Now, we can reconfigure the namespace:
[root@localhost ~]# ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax
[ 131.409351] nd_pmem namespace0.0: could not reserve region [mem 0x140000000-0x33fffffff]dax
[ 131.410147] nd_pmem: probe of namespace0.0 failed with error -16namespace0.0 --mode=devdax
...
This fails as expected due to the busy memory resource, and the memory
cannot be used. However, the dax0.0 device is removed, and along its
name.
The name of the memory resource now points at freed memory (name of the
device):
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : �_�^7_��/_��wR��WQ���^��� ...
150000000-33fffffff : System RAM
We have to make sure to duplicate the string. While at it, remove the
superfluous setting of the name and fixup a stale comment.
Fixes: 9f960da72b25 ("device-dax: "Hotremove" persistent memory that is used like normal RAM")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org> [5.3]
Link: http://lkml.kernel.org/r/20200508084217.9160-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zero_page_range() dax operation is mandatory for dax devices. Right now
that check happens in dax_zero_page_range() function. Dan thinks that's
too late and its better to do the check earlier in alloc_dax().
I also modified alloc_dax() to return pointer with error code in it in
case of failure. Right now it returns NULL and caller assumes failure
happened due to -ENOMEM. But with this ->zero_page_range() check, I
need to return -EINVAL instead.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20200401161125.GB9398@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add a dax operation zero_page_range, to zero a page. This will also clear any
known poison in the page being zeroed.
As of now, zeroing of one page is allowed in a single call. There
are no callers which are trying to zero more than a page in a single call.
Once we grow the callers which zero more than a page in single call, we
can add that support. Primary reason for not doing that yet is that this
will add little complexity in dm implementation where a range might be
spanning multiple underlying targets and one will have to split the range
into multiple sub ranges and call zero_page_range() on individual targets.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: https://lore.kernel.org/r/20200228163456.1587-3-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Looks like nobody is using fs_dax_get_by_host() except fs_dax_get_by_bdev()
and it can easily use dax_get_by_host() instead.
IIUC, fs_dax_get_by_host() was only introduced so that one could compile
with CONFIG_FS_DAX=n and CONFIG_DAX=m. fs_dax_get_by_bdev() achieves
the same purpose and hence it looks like fs_dax_get_by_host() is not
needed anymore.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200106181117.GA16248@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The highlight this cycle is continuing integration fixes for PowerPC
and some resulting optimizations.
Summary:
- Updates to better support vmalloc space restrictions on PowerPC
platforms.
- Cleanups to move common sysfs attributes to core 'struct
device_type' objects.
- Export the 'target_node' attribute (the effective numa node if pmem
is marked online) for regions and namespaces.
- Miscellaneous fixups and optimizations"
* tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
MAINTAINERS: Remove Keith from NVDIMM maintainers
libnvdimm: Export the target_node attribute for regions and namespaces
dax: Add numa_node to the default device-dax attributes
libnvdimm: Simplify root read-only definition for the 'resource' attribute
dax: Simplify root read-only definition for the 'resource' attribute
dax: Create a dax device_type
libnvdimm: Move nvdimm_bus_attribute_group to device_type
libnvdimm: Move nvdimm_attribute_group to device_type
libnvdimm: Move nd_mapping_attribute_group to device_type
libnvdimm: Move nd_region_attribute_group to device_type
libnvdimm: Move nd_numa_attribute_group to device_type
libnvdimm: Move nd_device_attribute_group to device_type
libnvdimm: Move region attribute group definition
libnvdimm: Move attribute groups to device type
libnvdimm: Remove prototypes for nonexistent functions
libnvdimm/btt: fix variable 'rc' set but not used
libnvdimm/pmem: Delete include of nd-core.h
libnvdimm/namespace: Differentiate between probe mapping and runtime mapping
libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe
libnvdimm: Trivial comment fix
...
|
|
It is confusing that device-dax instances publish a 'target_node'
attribute, but not a 'numa_node'. The 'numa_node' information is
available elsewhere in the sysfs device hierarchy, but it is not obvious
and not reliable from one device-dax instance-type (e.g. child devices
of nvdimm namespaces) to the next (e.g. 'hmem' devices defined by EFI
Specific Purpose Memory and the ACPI HMAT).
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309906102.1582359.4262088001244476001.stgit@dwillia2-desk3.amr.corp.intel.com
|
|
Rather than update the permission in ->is_visible() set the permission
directly at declaration time.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309904959.1582359.7281180042781955506.stgit@dwillia2-desk3.amr.corp.intel.com
|
|
Move the open coded release method and attribute groups to a 'struct
device_type' instance.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309904365.1582359.5451327195246651379.stgit@dwillia2-desk3.amr.corp.intel.com
|
|
The nvdimm core currently maps the full namespace to an ioremap range
while probing the namespace mode. This can result in probe failures on
architectures that have limited ioremap space.
For example, with a large btt namespace that consumes most of I/O remap
range, depending on the sequence of namespace initialization, the user
can find a pfn namespace initialization failure due to unavailable I/O
remap space which nvdimm core uses for temporary mapping.
nvdimm core can avoid this failure by only mapping the reserved info
block area to check for pfn superblock type and map the full namespace
resource only before using the namespace.
Given that personalities like BTT can be layered on top of any namespace
type create a generic form of devm_nsio_enable (devm_namespace_enable)
and use it inside the per-personality attach routines. Now
devm_namespace_enable() is always paired with disable unless the mapping
is going to be used for long term runtime access.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20191017073308.32645-1-aneesh.kumar@linux.ibm.com
[djbw: reworks to move devm_namespace_{en,dis}able into *attach helpers]
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20191031105741.102793-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Platform firmware like EFI/ACPI may publish "hmem" platform devices.
Such a device is a performance differentiated memory range likely
reserved for an application specific use case. The driver gives access
to 100% of the capacity via a device-dax mmap instance by default.
However, if over-subscription and other kernel memory management is
desired the resulting dax device can be assigned to the core-mm via the
kmem driver.
This consumes "hmem" devices the producer of "hmem" devices is saved for
a follow-on patch so that it can reference the new CONFIG_DEV_DAX_HMEM
symbol to gate performing the enumeration work.
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PFN flags are (unsigned long long), fix the alloc_dax_region() calling
convention to fix warnings of the form:
>> include/linux/pfn_t.h:18:17: warning: large integer implicitly truncated to unsigned type [-Woverflow]
#define PFN_DEV (1ULL << (BITS_PER_LONG_LONG - 3))
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax updates from Dan Williams:
"The fruits of a bug hunt in the fsdax implementation with Willy and a
small feature update for device-dax:
- Fix a hang condition that started triggering after the Xarray
conversion of fsdax in the v4.20 kernel.
- Add a 'resource' (root-only physical base address) sysfs attribute
to device-dax instances to correlate memory-blocks onlined via the
kmem driver with a given device instance"
* tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix missed wakeup with PMD faults
device-dax: Add a 'resource' attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Primarily just the virtio_pmem driver:
- virtio_pmem
The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX
mechanisms to access a host-file with host-page-cache. It arranges
for MAP_SYNC to be disabled and instead triggers a host fsync()
when a 'write-cache flush' command is sent to the virtual disk
device.
- Miscellaneous small fixups"
* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
virtio_pmem: fix sparse warning
xfs: disable map_sync for async flush
ext4: disable map_sync for async flush
dax: check synchronous mapping is supported
dm: enable synchronous dax
libnvdimm: add dax_dev sync flag
virtio-pmem: Add virtio pmem driver
libnvdimm: nd_region flush callback support
libnvdimm, namespace: Drop uuid_t implementation detail
|
|
It is now allowed to use persistent memory like a regular RAM, but
currently there is no way to remove this memory until machine is
rebooted.
This work expands the functionality to also allows hotremoving
previously hotplugged persistent memory, and recover the device for use
for other purposes.
To hotremove persistent memory, the management software must first
offline all memory blocks of dax region, and than unbind it from
device-dax/kmem driver. So, operations should look like this:
echo offline > /sys/devices/system/memory/memoryN/state
...
echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
Note: if unbind is done without offlining memory beforehand, it won't be
possible to do dax0.0 hotremove, and dax's memory is going to be part of
System RAM until reboot.
Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series ""Hotremove" persistent memory", v6.
Recently, adding a persistent memory to be used like a regular RAM was
added to Linux. This work extends this functionality to also allow hot
removing persistent memory.
We (Microsoft) have an important use case for this functionality.
The requirement is for physical machines with small amount of RAM (~8G)
to be able to reboot in a very short period of time (<1s). Yet, there
is a userland state that is expensive to recreate (~2G).
The solution is to boot machines with 2G preserved for persistent
memory.
Copy the state, and hotadd the persistent memory so machine still has
all 8G available for runtime. Before reboot, offline and hotremove
device-dax 2G, copy the memory that is needed to be preserved to pmem0
device, and reboot.
The series of operations look like this:
1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps.
and free ramdisk.
2. Convert raw pmem0 to devdax
ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f
3. Hotadd to System RAM
echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
echo online_movable > /sys/devices/system/memoryXXX/state
4. Before reboot hotremove device-dax memory from System RAM
echo offline > /sys/devices/system/memoryXXX/state
echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
5. Create raw pmem0 device
ndctl create-namespace --mode raw -e namespace0.0 -f
6. Copy the state that was stored by apps to ramdisk to pmem device
7. Do kexec reboot or reboot through firmware if firmware does not
zero memory in pmem0 region (These machines have only regular
volatile memory). So to have pmem0 device either memmap kernel
parameter is used, or devices nodes in dtb are specified.
This patch (of 3):
When add_memory() fails, the resource and the memory should be freed.
Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com
Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds 'DAXDEV_SYNC' flag which is set
for nd_region doing synchronous flush. This later
is used to disable MAP_SYNC functionality for
ext4 & xfs filesystem for devices don't support
synchronous flush.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The functionality is identical to the one currently open coded in
device-dax.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Passing the actual typed structure leads to more understandable code
vs just passing the ref member.
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The dev_pagemap is a growing too many callbacks. Move them into a
separate ops structure so that they are not duplicated for multiple
instances, and an attacker can't easily overwrite them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Most pgmap types are only supported when certain config options are
enabled. Check for a type that is valid for the current configuration
before setting up the pagemap. For this the usage of the 0 type for
device dax gets replaced with an explicit MEMORY_DEVICE_DEVDAX type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
device-dax based devices were missing a 'resource' attribute to indicate
the physical address range contributed by the device in question. This
information is desirable to userspace tooling that may want to use the
dax device as system-ram, and wants to selectively hotplug and online
the memory blocks associated with a given device.
Without this, the tooling would have to parse /proc/iomem for the memory
ranges contributed by dax devices, which can be a workaround, but it is
far easier to provide this information in the sysfs hierarchy.
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Logan noticed that devm_memremap_pages_release() kills the percpu_ref
drops all the page references that were acquired at init and then
immediately proceeds to unplug, arch_remove_memory(), the backing pages
for the pagemap. If for some reason device shutdown actually collides
with a busy / elevated-ref-count page then arch_remove_memory() should
be deferred until after that reference is dropped.
As it stands the "wait for last page ref drop" happens *after*
devm_memremap_pages_release() returns, which is obviously too late and
can lead to crashes.
Fix this situation by assigning the responsibility to wait for the
percpu_ref to go idle to devm_memremap_pages() with a new ->cleanup()
callback. Implement the new cleanup callback for all
devm_memremap_pages() users: pmem, devdax, hmm, and p2pdma.
Link: http://lkml.kernel.org/r/155727339156.292046.5432007428235387859.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 41e94a851304 ("add devm_memremap_pages")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 64 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the dax filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Dan Williams <dan.j.williams@intel.com>
cc: Vishal Verma <vishal.l.verma@intel.com>
cc: Keith Busch <keith.busch@intel.com>
cc: Dave Jiang <dave.jiang@intel.com>
cc: linux-nvdimm@lists.01.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Once upon a time we used to set ->d_name of e.g. pipefs root
so that d_path() on pipes would work. These days it's
completely pointless - dentries of pipes are not even connected
to pipefs root. However, mount_pseudo() had set the root
dentry name (passed as the second argument) and callers
kept inventing names to pass to it. Including those that
didn't *have* any non-root dentries to start with...
All of that had been pointless for about 8 years now; it's
time to get rid of that cargo-culting...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
- Fix a regression that disabled device-mapper dax support
- Remove unnecessary hardened-user-copy overhead (>30%) for dax
read(2)/write(2).
- Fix some compilation warnings.
* tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead
dax: Arrange for dax_supported check to span multiple devices
libnvdimm: Fix compilation warnings with W=1
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device-dax fs is only there to allocate a common inode for each
device-node that refers to the same device by major:minor. It is
otherwise not user mountable and need not be displayed in
/proc/filesystems.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pankaj reports that starting with commit ad428cdb525a "dax: Check the
end of the block-device capacity with dax_direct_access()" device-mapper
no longer allows dax operation. This results from the stricter checks in
__bdev_dax_supported() that validate that the start and end of a
block-device map to the same 'pagemap' instance.
Teach the dax-core and device-mapper to validate the 'pagemap' on a
per-target basis. This is accomplished by refactoring the
bdev_dax_supported() internals into generic_fsdax_supported() which
takes a sector range to validate. Consequently generic_fsdax_supported()
is suitable to be used in a device-mapper ->iterate_devices() callback.
A new ->dax_supported() operation is added to allow composite devices to
split and route upper-level bdev_dax_supported() requests.
Fixes: ad428cdb525a ("dax: Check the end of the block-device...")
Cc: <stable@vger.kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Just a small collection of fixes this time around.
The new virtio-pmem driver is nearly ready, but some last minute
device-mapper acks and virtio questions made it prudent to await v5.3.
Other major topics that were brewing on the linux-nvdimm mailing list
like sub-section hotplug, and other devm_memremap_pages() reworks will
go upstream through Andrew's tree.
Summary:
- Fix a long standing namespace label corruption scenario when
re-provisioning capacity for a namespace.
- Restore the ability of the dax_pmem module to be built-in.
- Harden the build for the 'nfit_test' unit test modules so that the
userspace test harness can ensure all required test modules are
available"
* tag 'libnvdimm-fixes-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
drivers/dax: Allow to include DEV_DAX_PMEM as builtin
libnvdimm/namespace: Fix label tracking error
tools/testing/nvdimm: add watermarks for dax_pmem* modules
dax/pmem: Fix whitespace in dax_pmem
|
|
addresses
Starting with c6f3c5ee40c1 ("mm/huge_memory.c: fix modifying of page
protection by insert_pfn_pmd()") vmf_insert_pfn_pmd() internally calls
pmdp_set_access_flags(). That helper enforces a pmd aligned @address
argument via VM_BUG_ON() assertion.
Update the implementation to take a 'struct vm_fault' argument directly
and apply the address alignment fixup internally to fix crash signatures
like:
kernel BUG at arch/x86/mm/pgtable.c:515!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 51 PID: 43713 Comm: java Tainted: G OE 4.19.35 #1
[..]
RIP: 0010:pmdp_set_access_flags+0x48/0x50
[..]
Call Trace:
vmf_insert_pfn_pmd+0x198/0x350
dax_iomap_fault+0xe82/0x1190
ext4_dax_huge_fault+0x103/0x1f0
? __switch_to_asm+0x40/0x70
__handle_mm_fault+0x3f6/0x1370
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
handle_mm_fault+0xda/0x200
__do_page_fault+0x249/0x4f0
do_page_fault+0x32/0x110
? page_fault+0x8/0x30
page_fault+0x1e/0x30
Link: http://lkml.kernel.org/r/155741946350.372037.11148198430068238140.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: c6f3c5ee40c1 ("mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Piotr Balcer <piotr.balcer@intel.com>
Tested-by: Yan Ma <yan.ma@intel.com>
Tested-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Chandan Rajendra <chandan@linux.ibm.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This move the dependency to DEV_DAX_PMEM_COMPAT such that only
if DEV_DAX_PMEM is built as module we can allow the compat support.
This allows to test the new code easily in a emulation setup where we
often build things without module support.
Cc: <stable@vger.kernel.org>
Fixes: 730926c3b099 ("device-dax: Add /sys/class/dax backwards compatibility")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
we might want to drop ->destroy_inode() there - it's used only for
WARN_ON() now, and AFAICS that could be moved to ->evict_inode()
if we had one...
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
A few lines were whitespace damaged, with spaces at the start instead of
tabs. This was noticed while debugging an nfit_test failure, so fix
them.
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull device-dax updates from Dan Williams:
"New device-dax infrastructure to allow persistent memory and other
"reserved" / performance differentiated memories, to be assigned to
the core-mm as "System RAM".
Some users want to use persistent memory as additional volatile
memory. They are willing to cope with potential performance
differences, for example between DRAM and 3D Xpoint, and want to use
typical Linux memory management apis rather than a userspace memory
allocator layered over an mmap() of a dax file. The administration
model is to decide how much Persistent Memory (pmem) to use as System
RAM, create a device-dax-mode namespace of that size, and then assign
it to the core-mm. The rationale for device-dax is that it is a
generic memory-mapping driver that can be layered over any "special
purpose" memory, not just pmem. On subsequent boots udev rules can be
used to restore the memory assignment.
One implication of using pmem as RAM is that mlock() no longer keeps
data off persistent media. For this reason it is recommended to enable
NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
at rest. We considered making this recommendation an actively enforced
requirement, but in the end decided to leave it as a distribution /
administrator policy to allow for emulation and test environments that
lack security capable NVDIMMs.
Summary:
- Replace the /sys/class/dax device model with /sys/bus/dax, and
include a compat driver so distributions can opt-in to the new ABI.
- Allow for an alternative driver for the device-dax address-range
- Introduce the 'kmem' driver to hotplug / assign a device-dax
address-range to the core-mm.
- Arrange for the device-dax target-node to be onlined so that the
newly added memory range can be uniquely referenced by numa apis"
NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.
And apparently the PMEM modules can cause that a lot more than regular
RAM. The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.
Quoting Dan from another email:
"The exposure can be reduced in the volatile-RAM case by scanning for
and clearing errors before it is onlined as RAM. The userspace tooling
for that can be in place before v5.1-final. There's also runtime
notifications of errors via acpi_nfit_uc_error_notify() from
background scrubbers on the DIMM devices. With that mechanism the
kernel could proactively clear newly discovered poison in the volatile
case, but that would be additional development more suitable for v5.2.
I understand the concern, and the need to highlight this issue by
tapping the brakes on feature development, but I don't see PMEM as RAM
making the situation worse when the exposure is also there via DAX in
the PMEM case. Volatile-RAM is arguably a safer use case since it's
possible to repair pages where the persistent case needs active
application coordination"
* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: "Hotplug" persistent memory for use like normal RAM
mm/resource: Let walk_system_ram_range() search child resources
mm/memory-hotplug: Allow memory resources to be children
mm/resource: Move HMM pr_debug() deeper into resource code
mm/resource: Return real error codes from walk failures
device-dax: Add a 'modalias' attribute to DAX 'bus' devices
device-dax: Add a 'target_node' attribute
device-dax: Auto-bind device after successful new_id
acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
device-dax: Add /sys/class/dax backwards compatibility
device-dax: Add support for a dax override driver
device-dax: Move resource pinning+mapping into the common driver
device-dax: Introduce bus + driver model
device-dax: Start defining a dax bus model
device-dax: Remove multi-resource infrastructure
device-dax: Kill dax_region base
device-dax: Kill dax_region ida
|
|
This is intended for use with NVDIMMs that are physically persistent
(physically like flash) so that they can be used as a cost-effective
RAM replacement. Intel Optane DC persistent memory is one
implementation of this kind of NVDIMM.
Currently, a persistent memory region is "owned" by a device driver,
either the "Direct DAX" or "Filesystem DAX" drivers. These drivers
allow applications to explicitly use persistent memory, generally
by being modified to use special, new libraries. (DIMM-based
persistent memory hardware/software is described in great detail
here: Documentation/nvdimm/nvdimm.txt).
However, this limits persistent memory use to applications which
*have* been modified. To make it more broadly usable, this driver
"hotplugs" memory into the kernel, to be managed and used just like
normal RAM would be.
To make this work, management software must remove the device from
being controlled by the "Device DAX" infrastructure:
echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
and then tell the new driver that it can bind to the device:
echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
After this, there will be a number of new memory sections visible
in sysfs that can be onlined, or that may get onlined by existing
udev-initiated memory hotplug rules.
This rebinding procedure is currently a one-way trip. Once memory
is bound to "kmem", it's there permanently and can not be
unbound and assigned back to device_dax.
The kmem driver will never bind to a dax device unless the device
is *explicitly* bound to the driver. There are two reasons for
this: One, since it is a one-way trip, it can not be undone if
bound incorrectly. Two, the kmem driver destroys data on the
device. Think of if you had good data on a pmem device. It
would be catastrophic if you compile-in "kmem", but leave out
the "device_dax" driver. kmem would take over the device and
write volatile data all over your good data.
This inherits any existing NUMA information for the newly-added
memory from the persistent memory device that came from the
firmware. On Intel platforms, the firmware has guarantees that
require each socket's persistent memory to be in a separate
memory-only NUMA node. That means that this patch is not expected
to create NUMA nodes, but will simply hotplug memory into existing
nodes.
Because NUMA nodes are created, the existing NUMA APIs and tools
are sufficient to create policies for applications or memory areas
to have affinity for or an aversion to using this memory.
There is currently some metadata at the beginning of pmem regions.
The section-size memory hotplug restrictions, plus this small
reserved area can cause the "loss" of a section or two of capacity.
This should be fixable in follow-on patches. But, as a first step,
losing 256MB of memory (worst case) out of hundreds of gigabytes
is a good tradeoff vs. the required code to fix this up precisely.
This calculation is also the reason we export
memory_block_size_bytes().
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: linux-nvdimm@lists.01.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add a 'modalias' attribute to devices under the DAX bus so that userspace
is able to dynamically load modules as needed.
Normally, udev can get the modalias from 'uevent', and that is correctly
set up by the DAX bus. However other tooling such as 'libndctl' for
interacting with drivers/nvdimm/, and 'libdaxctl' for drivers/dax/ can
also use the modalias to dynamically load modules via libkmod lookups.
The 'nd' bus set up by the libnvdimm subsystem exports a modalias
attribute. Imitate this to export the same for the 'dax' bus.
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The checks in __bdev_dax_supported() helped mitigate a potential data
corruption bug in the pmem driver's handling of section alignment
padding. Strengthen the checks, including checking the end of the range,
to validate the dev_pagemap, Xarray entries, and sector-to-pfn
translation established for pmem namespaces.
Acked-by: Jan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The target-node attribute is the Linux numa-node that a device-dax
instance may create when it is online. Prior to being online the
device's 'numa_node' property reflects the closest online cpu node which
is the typical expectation of a device 'numa_node'. Once it is online it
becomes its own distinct numa node, i.e. 'target_node'.
Export the 'target_node' property to give userspace tooling the ability
to predict the effective numa-node from a device-dax instance configured
to provide 'System RAM' capacity.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
