summaryrefslogtreecommitdiff
path: root/drivers/crypto/stm32
AgeCommit message (Collapse)Author
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-27crypto: stm32_crc32 - Use existing define with polynomialKrzysztof Kozlowski
Do not define again the polynomial but use header with existing define. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09crypto: ahash - remove useless setting of type flagsEric Biggers
Many ahash algorithms set .cra_flags = CRYPTO_ALG_TYPE_AHASH. But this is redundant with the C structure type ('struct ahash_alg'), and crypto_register_ahash() already sets the type flag automatically, clearing any type flag that was already there. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the ahash algorithms. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09crypto: stm32/crc - Add power management supportlionel.debieve@st.com
Adding pm and pm_runtime support to STM32 CRC. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09crypto: stm32/hash - Add power management supportlionel.debieve@st.com
Adding pm and pm_runtime support to STM32 HASH. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09crypto: stm32/cryp - Add power management supportlionel.debieve@st.com
Adding pm and pm_runtime support to STM32 CRYP. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-15crypto: stm32/cryp - add stm32mp1 supportFabien DESSENNE
stm32mp1 differs from stm32f7 in the way it handles byte ordering and padding for aes gcm & ccm algo. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-15crypto: stm32/cryp - add aes gcm / ccm supportFabien DESSENNE
Add AEAD cipher algorithms for aes gcm and ccm. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-15crypto: stm32/hash - rework padding lengthLionel Debieve
Due to another patch, the dma fails when padding is needed as the given length is not correct. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-15crypto: stm32/hash - fix performance issuesLionel Debieve
Fixing bugs link to stress tests. Bad results are detected during testmgr selftests executing in a faster environment. bufcnt value may be resetted and false IT are sometimes detected. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-15crypto: stm32/hash - avoid error if maxburst not definedLionel Debieve
dma-maxburst is an optional value and must not return error in case of dma not used (or max-burst not defined). Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-15crypto: stm32-cryp - convert to the new crypto engine APICorentin LABBE
This patch convert the stm32-cryp driver to the new crypto engine API. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-15crypto: stm32-hash - convert to the new crypto engine APICorentin LABBE
This patch convert the stm32-hash driver to the new crypto engine API. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()weiyongjun \(A\)
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12crypto: hash - annotate algorithms taking optional keyEric Biggers
We need to consistently enforce that keyed hashes cannot be used without setting the key. To do this we need a reliable way to determine whether a given hash algorithm is keyed or not. AF_ALG currently does this by checking for the presence of a ->setkey() method. However, this is actually slightly broken because the CRC-32 algorithms implement ->setkey() but can also be used without a key. (The CRC-32 "key" is not actually a cryptographic key but rather represents the initial state. If not overridden, then a default initial state is used.) Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which indicates that the algorithm has a ->setkey() method, but it is not required to be called. Then set it on all the CRC-32 algorithms. The same also applies to the Adler-32 implementation in Lustre. Also, the cryptd and mcryptd templates have to pass through the flag from their underlying algorithm. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-28crypto: stm32 - Use standard CONFIG nameCorentin Labbe
All hardware crypto devices have their CONFIG names using the following convention: CRYPTO_DEV_name_algo This patch apply this conventions on STM32 CONFIG names. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-11crypto: stm32 - fix module device table nameCorentin LABBE
This patch fix the following build failure: CC [M] drivers/crypto/stm32/stm32-cryp.o In file included from drivers/crypto/stm32/stm32-cryp.c:11:0: drivers/crypto/stm32/stm32-cryp.c:1049:25: error: 'sti_dt_ids' undeclared here (not in a function) MODULE_DEVICE_TABLE(of, sti_dt_ids); Let's replace sti_dt_ids with stm32_dt_ids which is just declared before. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-29crypto: stm32 - Support for STM32 CRYP crypto moduleFabien DESSENNE
This module registers block cipher algorithms that make use of the STMicroelectronics STM32 crypto "CRYP1" hardware. The following algorithms are supported: - aes: ecb, cbc, ctr - des: ecb, cbc - tdes: ecb, cbc Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-10crypto: stm32/hash - Fix return issue on updateLionel Debieve
When data append reached the threshold for processing, we must inform that processing is on going to wait before managing the next request. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-07crypto: stm32 - use of_device_get_match_dataCorentin LABBE
The usage of of_device_get_match_data reduce the code size a bit. Furthermore, it prevents an improbable dereference when of_match_device() return NULL. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-07crypto: stm32 - Try to fix hash paddingArnd Bergmann
gcc warns that the length for the extra unaligned data in the hash function may be used unaligned. In theory this could happen if we pass a zero-length sg_list, or if sg_is_last() was never true: In file included from drivers/crypto/stm32/stm32-hash.c:23: drivers/crypto/stm32/stm32-hash.c: In function 'stm32_hash_one_request': include/uapi/linux/kernel.h:12:49: error: 'ncp' may be used uninitialized in this function [-Werror=maybe-uninitialized] #define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) Neither of these can happen in practice, so the warning is harmless. However while trying to suppress the warning, I noticed multiple problems with that code: - On big-endian kernels, we byte-swap the data like we do for register accesses, however this is a data stream and almost certainly needs to use a single writesl() instead of series of writel() to give the correct hash. - If the length is not a multiple of four bytes, we skip the last word entirely, since we write the truncated length using stm32_hash_set_nblw(). - If we change the code to round the length up rather than down, the last bytes contain stale data, so it needs some form of padding. This tries to address all four problems, by correctly initializing the length to zero, using endian-safe copy functions, adding zero-padding and passing the padded length. I have done no testing on this patch, so please review carefully and if possible test with an unaligned length and big-endian kernel builds. Fixes: 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22crypto: stm32/hash - Remove uninitialized symbollionel.debieve@st.com
Remove err symbol as this is not used in the thread context and the variable is not initialized. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-28crypto: stm32 - Support for STM32 HASH modulelionel.debieve@st.com
This module register a HASH module that support multiples algorithms: MD5, SHA1, SHA224, SHA256. It includes the support of HMAC hardware processing corresponding to the supported algorithms. DMA or IRQ mode are used depending on data length. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-28crypto: stm32 - Rename module to use generic cryptolionel.debieve@st.com
The complete stm32 module is rename as crypto in order to use generic naming Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-28crypto: stm32 - solve crc issue during unbindlionel.debieve@st.com
Use the correct unregister_shashes function to to remove the registered algo Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-28crypto: stm32 - CRC use relaxed functionlionel.debieve@st.com
In case of arm soc support, readl and writel will be optimized using relaxed functions Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-30crypto: stm32 - Fix OF module alias informationWei Yongjun
The module alias information passed to MODULE_DEVICE_TABLE() should use stm32_dt_ids instead of undefined sti_dt_ids. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05crypto: stm32 - Support for STM32 CRC32 crypto moduleFabien DESSENNE
This module registers a CRC32 ("Ethernet") and a CRC32C (Castagnoli) algorithm that make use of the STMicroelectronics STM32 crypto hardware. Theses algorithms are compatible with the little-endian generic ones. Both algorithms use ~0 as default seed (key). With CRC32C the output is xored with ~0. Using TCRYPT CRC32C speed test, this shows up to 900% speedup compared to the crc32c-generic algorithm. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 07:36:53 +0000