summaryrefslogtreecommitdiff
path: root/drivers/crypto/qat
AgeCommit message (Collapse)Author
2020-03-12crypto: qat - simplify the qat_crypto functionTianjia Zhang
simplify code to remove unnecessary constant string copies. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-22crypto: qat - spelling s/Decrytp/Decrypt/Geert Uytterhoeven
Fix a typo in a comment. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-09crypto: remove CRYPTO_TFM_RES_BAD_KEY_LENEric Biggers
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to make the ->setkey() functions provide more information about errors. However, no one actually checks for this flag, which makes it pointless. Also, many algorithms fail to set this flag when given a bad length key. Reviewing just the generic implementations, this is the case for aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309, rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably many more in arch/*/crypto/ and drivers/crypto/. Some algorithms can even set this flag when the key is the correct length. For example, authenc and authencesn set it when the key payload is malformed in any way (not just a bad length), the atmel-sha and ccree drivers can set it if a memory allocation fails, and the chelsio driver sets it for bad auth tag lengths, not just bad key lengths. So even if someone actually wanted to start checking this flag (which seems unlikely, since it's been unused for a long time), there would be a lot of work needed to get it working correctly. But it would probably be much better to go back to the drawing board and just define different return values, like -EINVAL if the key is invalid for the algorithm vs. -EKEYREJECTED if the key was rejected by a policy like "no weak keys". That would be much simpler, less error-prone, and easier to test. So just remove this flag. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-17crypto: qat - switch to skcipher APIArd Biesheuvel
Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface") dated 20 august 2015 introduced the new skcipher API which is supposed to replace both blkcipher and ablkcipher. While all consumers of the API have been converted long ago, some producers of the ablkcipher remain, forcing us to keep the ablkcipher support routines alive, along with the matching code to expose [a]blkciphers via the skcipher API. So switch this driver to the skcipher API, allowing us to finally drop the ablkcipher code in the near future. Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-01crypto: skcipher - rename the crypto_blkcipher module and kconfig optionEric Biggers
Now that the blkcipher algorithm type has been removed in favor of skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher, and rename the config options accordingly: CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2 Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-23compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann
The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-02crypto: qat - Silence smp_processor_id() warningAlexander Sverdlin
It seems that smp_processor_id() is only used for a best-effort load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible to disable preemption for the duration of the crypto requests. Therefore, just silence the warning. This commit is similar to e7a9b05ca4 ("crypto: cavium - Fix smp_processor_id() warnings"). Silences the following splat: BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904 caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P O 4.14.69 #1 ... Call Trace: dump_stack+0x5f/0x86 check_preemption_disabled+0xd3/0xe0 qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] skcipher_setkey_ablkcipher+0x2b/0x40 __test_skcipher+0x1f3/0xb20 ? cpumask_next_and+0x26/0x40 ? find_busiest_group+0x10e/0x9d0 ? preempt_count_add+0x49/0xa0 ? try_module_get+0x61/0xf0 ? crypto_mod_get+0x15/0x30 ? __kmalloc+0x1df/0x1f0 ? __crypto_alloc_tfm+0x116/0x180 ? crypto_skcipher_init_tfm+0xa6/0x180 ? crypto_create_tfm+0x4b/0xf0 test_skcipher+0x21/0xa0 alg_test_skcipher+0x3f/0xa0 alg_test.part.6+0x126/0x2a0 ? finish_task_switch+0x21b/0x260 ? __schedule+0x1e9/0x800 ? __wake_up_common+0x8d/0x140 cryptomgr_test+0x40/0x50 kthread+0xff/0x130 ? cryptomgr_notify+0x540/0x540 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x24/0x50 Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-08Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
2019-06-13crypto: qat - use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct qat_alg_buf_list { ... struct qat_alg_buf bufers[]; } __packed __aligned(64); Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(struct qat_alg_buf_list) + ((1 + n) * sizeof(struct qat_alg_buf)) with: struct_size(bufl, bufers, n + 1) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-23crypto: qat - do not offload zero length requestsGiovanni Cabiddu
If a zero length request is submitted through the skcipher api, do not offload it and return success. Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-23crypto: qat - return error for block ciphers for invalid requestsGiovanni Cabiddu
Return -EINVAL if a request for a block cipher is not multiple of the size of the block. This problem was found with by the new extra run-time crypto self test. Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-23crypto: qat - return proper error code in setkeyGiovanni Cabiddu
If an invalid key is provided as input to the setkey function, the function always failed returning -ENOMEM rather than -EINVAL. Furthermore, if setkey was called multiple times with an invalid key, the device instance was getting leaked. This patch fixes the error paths in the setkey functions by returning the correct error code in case of error and freeing all the resources allocated in this function in case of failure. This problem was found with by the new extra run-time crypto self test. Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-23crypto: qat - fix block size for aes ctr modeGiovanni Cabiddu
The block size for aes counter mode was improperly set to AES_BLOCK_SIZE. This sets it to 1 as it is a stream cipher. This problem was found with by the new extra run-time crypto self test. Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-23crypto: qat - update iv after encryption or decryption operationsGiovanni Cabiddu
Allocate a contiguous buffer and instruct the qat hardware to return the iv at the end of an encryption or decryption operation. The iv is copied to the array provided by the user in the callback function. This problem was found with by the crypto self test. Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-23crypto: qat - add check for negative offset in alg precompute functionShant KumarX Sonnad
The offset is calculated based on type of hash algorithum. If the algorithum is invalid the offset can have negative value. Hence added negative offset check and return -EFAULT. Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Shant KumarX Sonnad <shant.kumarx.sonnad@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-23crypto: qat - remove spin_lock in qat_ablkcipher_setkeyXin Zeng
Remove unnecessary spin lock in qat_ablkcipher_setkey. Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Xin Zeng <xin.zeng@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18crypto: rsa - unimplement sign/verify for raw RSA backendsVitaly Chikunov
In preparation for new akcipher verify call remove sign/verify callbacks from RSA backends and make PKCS1 driver call encrypt/decrypt instead. This also complies with the well-known idea that raw RSA should never be used for sign/verify. It only should be used with proper padding scheme such as PKCS1 driver provides. Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Cc: qat-linux@intel.com Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary Hook <gary.hook@amd.com> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-03-05Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add helper for simple skcipher modes. - Add helper to register multiple templates. - Set CRYPTO_TFM_NEED_KEY when setkey fails. - Require neither or both of export/import in shash. - AEAD decryption test vectors are now generated from encryption ones. - New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random fuzzing. Algorithms: - Conversions to skcipher and helper for many templates. - Add more test vectors for nhpoly1305 and adiantum. Drivers: - Add crypto4xx prng support. - Add xcbc/cmac/ecb support in caam. - Add AES support for Exynos5433 in s5p. - Remove sha384/sha512 from artpec7 as hardware cannot do partial hash" [ There is a merge of the Freescale SoC tree in order to pull in changes required by patches to the caam/qi2 driver. ] * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits) crypto: s5p - add AES support for Exynos5433 dt-bindings: crypto: document Exynos5433 SlimSSS crypto: crypto4xx - add missing of_node_put after of_device_is_available crypto: cavium/zip - fix collision with generic cra_driver_name crypto: af_alg - use struct_size() in sock_kfree_s() crypto: caam - remove redundant likely/unlikely annotation crypto: s5p - update iv after AES-CBC op end crypto: x86/poly1305 - Clear key material from stack in SSE2 variant crypto: caam - generate hash keys in-place crypto: caam - fix DMA mapping xcbc key twice crypto: caam - fix hash context DMA unmap size hwrng: bcm2835 - fix probe as platform device crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number crypto: stm32 - drop pointless static qualifier in stm32_hash_remove() crypto: chelsio - Fixed Traffic Stall crypto: marvell - Remove set but not used variable 'ivsize' crypto: ccp - Update driver messages to remove some confusion crypto: adiantum - add 1536 and 4096-byte test vectors crypto: nhpoly1305 - add a test vector with len % 16 != 0 crypto: arm/aes-ce - update IV after partial final CTR block ...
2019-02-08crypto: qat - Remove unused goto labelHerbert Xu
This patch removes an unused label. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: f0fcf9ade46a ("crypto: qat - no need to check return...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01crypto: prefix header search paths with $(srctree)/Masahiro Yamada
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-02-01crypto: qat - no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Conor McLoughlin <conor.mcloughlin@intel.com> Cc: Waiman Long <longman@redhat.com> Cc: qat-linux@intel.com Cc: linux-crypto@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-25Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove VLA usage - Add cryptostat user-space interface - Add notifier for new crypto algorithms Algorithms: - Add OFB mode - Remove speck Drivers: - Remove x86/sha*-mb as they are buggy - Remove pcbc(aes) from x86/aesni - Improve performance of arm/ghash-ce by up to 85% - Implement CTS-CBC in arm64/aes-blk, faster by up to 50% - Remove PMULL based arm64/crc32 driver - Use PMULL in arm64/crct10dif - Add aes-ctr support in s5p-sss - Add caam/qi2 driver Others: - Pick better transform if one becomes available in crc-t10dif" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: chelsio - Update ntx queue received from cxgb4 crypto: ccree - avoid implicit enum conversion crypto: caam - add SPDX license identifier to all files crypto: caam/qi - simplify CGR allocation, freeing crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static crypto: arm64/aes-blk - ensure XTS mask is always loaded crypto: testmgr - fix sizeof() on COMP_BUF_SIZE crypto: chtls - remove set but not used variable 'csk' crypto: axis - fix platform_no_drv_owner.cocci warnings crypto: x86/aes-ni - fix build error following fpu template removal crypto: arm64/aes - fix handling sub-block CTS-CBC inputs crypto: caam/qi2 - avoid double export crypto: mxs-dcp - Fix AES issues crypto: mxs-dcp - Fix SHA null hashes and output length crypto: mxs-dcp - Implement sha import/export crypto: aegis/generic - fix for big endian systems crypto: morus/generic - fix for big endian systems crypto: lrw - fix rebase error after out of bounds fix crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X. crypto: cavium/nitrox - NITROX command queue changes. ...
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu
Merge crypto tree to pick up chelsio bug fix.
2018-10-05crypto: qat - move temp buffers off the stackArd Biesheuvel
Arnd reports that with Kees's latest VLA patches applied, the HMAC handling in the QAT driver uses a worst case estimate of 160 bytes for the SHA blocksize, allowing the compiler to determine the size of the stack frame at compile time and throw a warning: drivers/crypto/qat/qat_common/qat_algs.c: In function 'qat_alg_do_precomputes': drivers/crypto/qat/qat_common/qat_algs.c:257:1: error: the frame size of 1112 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Given that this worst case estimate is only 32 bytes larger than the actual block size of SHA-512, the use of a VLA here was hiding the excessive size of the stack frame from the compiler, and so we should try to move these buffers off the stack. So move the ipad/opad buffers and the various SHA state descriptors into the tfm context struct. Since qat_alg_do_precomputes() is only called in the context of a setkey() operation, this should be safe. Using SHA512_BLOCK_SIZE for the size of the ipad/opad buffers allows them to be used by SHA-1/SHA-256 as well. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-02PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep
After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-28crypto: qat - Fix KASAN stack-out-of-bounds bug in adf_probe()Waiman Long
The following KASAN warning was printed when booting a 64-bit kernel on some systems with Intel CPUs: [ 44.512826] ================================================================== [ 44.520165] BUG: KASAN: stack-out-of-bounds in find_first_bit+0xb0/0xc0 [ 44.526786] Read of size 8 at addr ffff88041e02fc50 by task kworker/0:2/124 [ 44.535253] CPU: 0 PID: 124 Comm: kworker/0:2 Tainted: G X --------- --- 4.18.0-12.el8.x86_64+debug #1 [ 44.545858] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS BKVDTRL1.86B.0005.D08.1712070559 12/07/2017 [ 44.555682] Workqueue: events work_for_cpu_fn [ 44.560043] Call Trace: [ 44.562502] dump_stack+0x9a/0xe9 [ 44.565832] print_address_description+0x65/0x22e [ 44.570683] ? find_first_bit+0xb0/0xc0 [ 44.570689] kasan_report.cold.6+0x92/0x19f [ 44.578726] find_first_bit+0xb0/0xc0 [ 44.578737] adf_probe+0x9eb/0x19a0 [qat_c62x] [ 44.578751] ? adf_remove+0x110/0x110 [qat_c62x] [ 44.591490] ? mark_held_locks+0xc8/0x140 [ 44.591498] ? _raw_spin_unlock+0x30/0x30 [ 44.591505] ? trace_hardirqs_on_caller+0x381/0x570 [ 44.604418] ? adf_remove+0x110/0x110 [qat_c62x] [ 44.604427] local_pci_probe+0xd4/0x180 [ 44.604432] ? pci_device_shutdown+0x110/0x110 [ 44.617386] work_for_cpu_fn+0x51/0xa0 [ 44.621145] process_one_work+0x8fe/0x16e0 [ 44.625263] ? pwq_dec_nr_in_flight+0x2d0/0x2d0 [ 44.629799] ? lock_acquire+0x14c/0x400 [ 44.633645] ? move_linked_works+0x12e/0x2a0 [ 44.637928] worker_thread+0x536/0xb50 [ 44.641690] ? __kthread_parkme+0xb6/0x180 [ 44.645796] ? process_one_work+0x16e0/0x16e0 [ 44.650160] kthread+0x30c/0x3d0 [ 44.653400] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 44.658457] ret_from_fork+0x3a/0x50 [ 44.663557] The buggy address belongs to the page: [ 44.668350] page:ffffea0010780bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 44.676356] flags: 0x17ffffc0000000() [ 44.680023] raw: 0017ffffc0000000 ffffea0010780bc8 ffffea0010780bc8 0000000000000000 [ 44.687769] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 44.695510] page dumped because: kasan: bad access detected [ 44.702578] Memory state around the buggy address: [ 44.707372] ffff88041e02fb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 44.714593] ffff88041e02fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 44.721810] >ffff88041e02fc00: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 f2 f2 [ 44.729028] ^ [ 44.734864] ffff88041e02fc80: f2 f2 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 [ 44.742082] ffff88041e02fd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 44.749299] ================================================================== Looking into the code: int ret, bar_mask; : for_each_set_bit(bar_nr, (const unsigned long *)&bar_mask, It is casting a 32-bit integer pointer to a 64-bit unsigned long pointer. There are two problems here. First, the 32-bit pointer address may not be 64-bit aligned. Secondly, it is accessing an extra 4 bytes. This is fixed by changing the bar_mask type to unsigned long. Cc: <stable@vger.kernel.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-04crypto: qat - Remove VLA usageKees Cook
In the quest to remove all stack VLA usage from the kernel[1], this uses the new upper bound for the stack buffer. Also adds a sanity check. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-03crypto: qat/adf_aer - Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai
adf_dev_aer_schedule_reset() adf_dev_aer_schedule_reset() is never called in atomic context, as it calls wait_for_completion_timeout(). adf_dev_aer_schedule_reset() calls kzalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-06-12treewide: kzalloc_node() -> kcalloc_node()Kees Cook
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-31crypto: qat - Add MODULE_FIRMWARE for all qat driversConor McLoughlin
Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-07.gitignore: move *-asn1.[ch] patterns to the top-level .gitignoreMasahiro Yamada
These are common patterns where source files are parsed by the asn1_compiler. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-31crypto: qat - don't leak pointers to authenc keysTudor-Dan Ambarus
In qat_alg_aead_init_sessions we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-15crypto: qat - Make several functions staticColin Ian King
Functions qat_rsa_set_n, qat_rsa_set_e and qat_rsa_set_n are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: drivers/crypto/qat/qat_common/qat_asym_algs.c:972:5: warning: symbol 'qat_rsa_set_n' was not declared. Should it be static? drivers/crypto/qat/qat_common/qat_asym_algs.c:1003:5: warning: symbol 'qat_rsa_set_e' was not declared. Should it be static? drivers/crypto/qat/qat_common/qat_asym_algs.c:1027:5: warning: symbol 'qat_rsa_set_d' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22crypto: qat - reduce stack size with KASANArnd Bergmann
Passing the register value by reference here leads a large amount of stack being used when CONFIG_KASAN is enabled: drivers/crypto/qat/qat_common/qat_hal.c: In function 'qat_hal_exec_micro_inst.constprop': drivers/crypto/qat/qat_common/qat_hal.c:963:1: error: the frame size of 1792 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] Changing the register-read function to return the value instead reduces the stack size to around 800 bytes, most of which is for the 'savuwords' array. The function now no longer returns an error code, but nothing ever evaluated that anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-10crypto: dh - Remove pointless checks for NULL 'p' and 'g'Eric Biggers
Neither 'p' nor 'g' can be NULL, as they were unpacked using crypto_dh_decode_key(). And it makes no sense for them to be optional. So remove the NULL checks that were copy-and-pasted into both modules. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10crypto: qat - Clean up error handling in qat_dh_set_secret()Eric Biggers
Update the error handling in qat_dh_set_secret() to mirror dh_set_secret(). The new version is less error-prone because freeing memory and setting the pointers to NULL is now only done in one place. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: qat - mark expected switch fall-throughs in qat_ucloGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: qat - remove unused and redundant pointer vf_infoColin Ian King
The pointer vf_info is being assigned but never read, it is redundant and therefore can be removed. Cleans up clang warning: Value stored to 'vf_info' is never read Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12crypto: qat - pr_err() strings should end with newlinesArvind Yadav
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-18crypto: qat - fix spelling mistake: "runing" -> "running"Colin Ian King
trivial fix to spelling mistake in dev_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-06Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping infrastructure from Christoph Hellwig: "This is the first pull request for the new dma-mapping subsystem In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me)" * tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits) ARM: dma-mapping: Remove traces of NOMMU code ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus ARM: NOMMU: Introduce dma operations for noMMU drivers: dma-mapping: allow dma_common_mmap() for NOMMU drivers: dma-coherent: Introduce default DMA pool drivers: dma-coherent: Account dma_pfn_offset when used with device tree dma: Take into account dma_pfn_offset dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs dma-mapping: remove dmam_free_noncoherent crypto: qat - avoid an uninitialized variable warning au1100fb: remove a bogus dma_free_nonconsistent call MAINTAINERS: add entry for dma mapping helpers powerpc: merge __dma_set_mask into dma_set_mask dma-mapping: remove the set_dma_mask method powerpc/cell: use the dma_supported method for ops switching powerpc/cell: clean up fixed mapping dma_ops initialization tile: remove dma_supported and mapping_error methods xen-swiotlb: remove xen_swiotlb_set_dma_mask arm: implement ->dma_supported instead of ->set_dma_mask mips/loongson64: implement ->dma_supported instead of ->set_dma_mask ...
2017-06-28crypto: qat - avoid an uninitialized variable warningArnd Bergmann
After commit 9e442aa6a753 ("x86: remove DMA_ERROR_CODE"), the inlining decisions in the qat driver changed slightly, introducing a new false-positive warning: drivers/crypto/qat/qat_common/qat_algs.c: In function 'qat_alg_sgl_to_bufl.isra.6': include/linux/dma-mapping.h:228:2: error: 'sz_out' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/crypto/qat/qat_common/qat_algs.c:676:9: note: 'sz_out' was declared here The patch that introduced this is correct, so let's just avoid the warning in this driver by rearranging the unwinding after an error to make it more obvious to the compiler what is going on. The problem here is the 'if (unlikely(dma_mapping_error(dev, blp)))' check, in which the 'unlikely' causes gcc to forget what it knew about the state of the variables. Cleaning up the dma state in the reverse order it was created means we can simplify the logic so it doesn't have to know about that state, and also makes it easier to understand. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 19:04:10 +0000