Age | Commit message (Collapse) | Author |
|
The unsigned long type for init_status and start_status in
service_hndl are not long enough to represent more than 64
acceleration devices. Use an array instead.
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove leading zeros in pci function number to be consistent
with output from lspci.
Signed-off-by: Pablo Marcos Oltra <pablo.marcos.oltra@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Zero embedded ram in DH85x devices. This is not
needed for newer generations as it is done by HW.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Some accelerators of the c62x series have only two bars.
This patch skips BAR0 if the accelerator does not have it.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace BIT(0) macro with proper definition in pf2vf path
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge the crypto tree to pull in vmx ghash fix.
|
|
Fix a memory leak in an error path in uc loader.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix incorrect value of ADF_C3XXX_ACCELERATORS_MASK.
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Copy const_tab array into DMA-able memory (accesible by qat hw).
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Increase value of supported key sizes for qat_aes_xts.
aes-xts keys consists of keys of equal size concatenated.
Fixes: def14bfaf30d ("crypto: qat - add support for ctr(aes) and xts(aes)")
Cc: stable@vger.kernel.org
Reported-by: Wenqian Yu <wenqian.yu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is not need to drop leading zeros from the RSA output
operations results.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add DH support under kpp api. Drop struct qat_rsa_request and
introduce a more generic struct qat_asym_request and share it
between RSA and DH requests.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extend qat driver to use RSA CRT mode when all CRT related components are
present in the private key. Simplify code in qat_rsa_setkey by adding
qat_rsa_clear_ctx.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Different product families will use FLR or SBR.
Virtual Function devices have no reset method.
Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Drop all asn1 related code and use the new rsa_helper
functions rsa_parse_[pub|priv]_key for parsing the key
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
alloc_workqueue replaces deprecated create_workqueue().
The workqueue device_reset_wq has workitem &reset_data->reset_work per
adf_reset_dev_data. The workqueue pf2vf_resp_wq is a workqueue for
PF2VF responses has workitem &pf2vf_resp->pf2vf_resp_work per pf2vf_resp.
The workqueue adf_vf_stop_wq is used to call adf_dev_stop()
asynchronously.
Dedicated workqueues have been used in all cases since the workitems
on the workqueues are involved in operation of crypto which can be used in
the IO path which is depended upon during memory reclaim. Hence,
WQ_MEM_RECLAIM has been set to gurantee forward progress under memory
pressure.
Since there are only a fixed number of work items, explicit concurrency
limit is unnecessary.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The sizeof(*ctx->dec_cd) and sizeof(*ctx->enc_cd) are equal,
but we should use the correct one for freeing memory anyway.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the adf_ctl_stop_devices to a void function.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The adf_vf_isr.c should only be build if CONFIG_PCI_IOV is enabled
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix copy and paste typo adf_isr.c
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge the crypto tree to pull in the qat adf_init_pf_wq fix.
|
|
Fix undefined reference issue reported by kbuild test robot.
Cc: <stable@vger.kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge the crypto tree to pull in the qat adf_init_pf_wq change.
|
|
The pf2vf_resp_wq is a global so it has to be created at init
and destroyed at exit, instead of per device.
Cc: <stable@vger.kernel.org>
Tested-by: Suresh Marikkannu <sureshx.marikkannu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix Section mismatch warinig in adf_exit_vf_wq()
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
IRQs need to be enabled when VFs go down in case some VF to PF
comms happens.
Tested-by: Suman Bangalore Sathyanarayana <sumanx.bangalore.sathyanarayana@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Before VF sends a signal to PF it should check if PF
is still running.
Tested-by: Suman Bangalore Sathyanarayana <sumanx.bangalore.sathyanarayana@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The vf2pf_init and vf2pf_exit are exactly the same for all VFs
so move them to common and reuse.
Tested-by: Suman Bangalore Sathyanarayana <sumanx.bangalore.sathyanarayana@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
VFs call adf_dev_stop() from a PF to VF interrupt bottom half.
This causes an oops "scheduling while atomic", because it tries
to acquire a mutex to un-register crypto algorithms.
This patch fixes the issue by calling adf_dev_stop() asynchronously.
Changes in v2:
- change kthread to a work queue.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It returns always zero anyway.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When stopping devices it is not enought to loop backwards.
We need to explicitly stop all VFs first.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
memcopying to a (null pointer + offset) will result
in memory corruption or undefined behaviour.
Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove redundant nrbg rings.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
FW requires the const_tab to be 1024 bytes aligned.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The default arbiter configuration for ring weights and response ordering
is exactly what we want so we don't need to configure anything more.
This will also fix the problem where number of bundles is different
between different devices.
Reported-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The definition of icp_qat_uof_regtype should be coherent with
the definition in firmware compiler.
Signed-off-by: Yang Pingchao <pingchao.yang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Yang Pingchao <pingchao.yang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix a leak on error path in qat asym
Reported-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
req_alloc functions already take into account the request data structure
when allocating memory.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
-This is required to support 32bit adf_ctl
utility on a 64bit driver
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
adf_dev_restore(accel_dev) was called in adf_dev_shutdown,no
need to call it in adf_device_reset_worker after adf_dev_shutdown
was called.
Signed-off-by: Yang Pingchao <pingchao.yang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
change name for c6x dev type to more generic.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is no esram on C3xxx devices so we don't need to wait for
it to initialize.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Change the variable times data type and timeout conditon since the value
of times should be -1 after loop.
Signed-off-by: Yang Pingchao <pingchao.yang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reported-by : Struk, Tadeusz <tadeusz.struk@intel.com>
Signed-off-by: Yang Pingchao <pingchao.yang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
c3xxx doesn't have the esram BAR and only has 6 ue.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|