summaryrefslogtreecommitdiff
path: root/drivers/crypto/hisilicon
AgeCommit message (Collapse)Author
2021-02-10crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2'Weili Qian
Since the size of base number is 16 bits, update the value of 'QM_SQC_VFT_BASE_MASK_V2' as 'GENMASK(15, 0)'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix request missing errorWeili Qian
Add 'qp_stop_fail_cb' to ensure it is called as device is resetting. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - removing driver after resetWeili Qian
Add waiting logic for resetting as removing driver, otherwise call trace will occur due to releasing resource. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/hpre - enable Elliptic curve cryptographyHui Tang
Enable x25519/x448/ecdh/ecdsa/sm2 algorithm on Kunpeng 930. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon - PASID fixed on Kunpeng 930Weili Qian
Enable PASID by setting 'sqc' and 'cqc' pasid bits per queue in Kunpeng 930. For Kunpeng 920, PASID is effective for all queues once set in SVA scenarios. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix use of 'dma_map_single'Weili Qian
Calling 'dma_map_single' after the data is written to ensure that the cpu cache and dma cache are consistent. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/hpre - tiny fixHui Tang
Update since some special settings only for Kunpeng920. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/hpre - adapt the number of clustersHui Tang
HPRE of Kunpeng 930 is updated on cluster numbers, so we try to update this driver to make it running okay on Kunpeng920/Kunpeng930 chips. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: hisilicon/hpre - add ecc algorithm inqury for uacce deviceHui Tang
Uacce SysFS support more algorithms inqury such as 'ecdh/ecdsa/sm2/x25519/x448' Signed-off-by: Hui Tang <tanghui20@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: hisilicon/hpre - add two RAS correctable errors processingHui Tang
1.One CE error is detecting timeout of generating a random number. 2.Another is detecting timeout of SVA prefetching address. Signed-off-by: Hui Tang <tanghui20@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29crypto: hisilicon/hpre - delete ECC 1bit error reported thresholdHui Tang
Delete 'HPRE_RAS_ECC1BIT_TH' register setting of hpre, since register 'QM_RAS_CE_THRESHOLD' of qm has done this work. Signed-off-by: Hui Tang <tanghui20@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-14crypto: hisilicon/sec - register SEC device to uacceKai Ye
Register SEC device to uacce framework for user space. Signed-off-by: Kai Ye <yekai13@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-14crypto: hisilicon/hpre - register HPRE device to uacceKai Ye
Register HPRE device to uacce framework for user space. Signed-off-by: Kai Ye <yekai13@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-14crypto: hisilicon - add ZIP device using mode parameterKai Ye
Add 'uacce_mode' parameter for ZIP, which can be set as 0(default) or 1. '0' means ZIP is only registered to kernel crypto, and '1' means it's registered to both kernel crypto and UACCE. Signed-off-by: Kai Ye <yekai13@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-14crypto: hisilicon/qm - SVA bugfixed on Kunpeng920Kai Ye
Kunpeng920 SEC/HPRE/ZIP cannot support running user space SVA and kernel Crypto at the same time. Therefore, the algorithms should not be registered to Crypto as user space SVA is enabled. Signed-off-by: Kai Ye <yekai13@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-11crypto: hisilicon/trng - replace atomic_add_return()Yejune Deng
a set of atomic_inc_return() looks more neater Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: hisilicon/trng - add support for PRNGWeili Qian
This patch adds support for pseudo random number generator(PRNG) in Crypto subsystem. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: hisilicon/trng - add HiSilicon TRNG driver supportWeili Qian
Move existing char/hw_random/hisi-trng-v2.c to crypto/hisilicon/trng.c. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: hisilicon/zip - add a work_queue for zip irqYang Shen
The patch 'irqchip/gic-v3-its: Balance initial LPI affinity across CPUs' set the IRQ to an uncentain CPU. If an IRQ is bound to the CPU used by the thread which is sending request, the throughput will be just half. So allocate a 'work_queue' and set as 'WQ_UNBOUND' to do the back half work on some different CPUS. Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: hisilicon/sec2 - Fix aead authentication setting key errorKai Ye
Fix aead auth setting key process error. if use soft shash function, driver need to use digest size replace of the user input key length. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - split 'hisi_qm_init' into smaller piecesWeili Qian
'hisi_qm_init' initializes configuration of QM. To improve code readability, split it into two pieces. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - split 'qm_eq_ctx_cfg' into smaller piecesWeili Qian
'qm_eq_ctx_cfg' initializes configuration of EQ and AEQ, split it into two pieces to improve code readability. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - split 'qm_qp_ctx_cfg' into smaller piecesWeili Qian
'qm_qp_ctx_cfg' initializes configuration of SQ and CQ, split it into two pieces to improve code readability. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - replace 'sprintf' with 'scnprintf'Weili Qian
Replace 'sprintf' with 'scnprintf' to avoid overrun. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - modify return type of 'qm_set_sqctype'Weili Qian
Since 'qm_set_sqctype' always returns 0, change it as 'void'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - modify the return type of debugfs interfaceWeili Qian
Since 'qm_create_debugfs_file' always returns 0, change it as 'void'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - modify the return type of functionWeili Qian
The returns of 'qm_get_hw_error_status' and 'qm_get_dev_err_status' are values from the hardware registers, which should not be defined as 'int', so update as 'u32'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - numbers are replaced by macrosWeili Qian
Some numbers are replaced by macros to avoid incomprehension. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-30crypto: hisilicon - fixes some coding styleLongfang Liu
Clean up extra blank lines Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-30crypto: hisilicon - delete unused structure member variablesLongfang Liu
1. Remove unused member‘pending_reqs' in‘sec_qp_ctx' structure. 2. Remove unused member‘status' in‘sec_dev' structure. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-30crypto: hisilicon - Fix doc warnings in sgl.c and qm.cShiju Jose
Fix following warnings caused by mismatch between function parameters and function comments. drivers/crypto/hisilicon/sgl.c:256: warning: Excess function parameter 'hw_sgl_dma' description in 'hisi_acc_sg_buf_unmap' drivers/crypto/hisilicon/sgl.c:256: warning: Excess function parameter 'pool' description in 'hisi_acc_sg_buf_unmap' drivers/crypto/hisilicon/qm.c:1849: warning: Function parameter or member 'qp' not described in 'qm_drain_qp' drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'qm' not described in 'hisi_qm_set_vft' drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'fun_num' not described in 'hisi_qm_set_vft' drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'base' not described in 'hisi_qm_set_vft' drivers/crypto/hisilicon/qm.c:2420: warning: Function parameter or member 'number' not described in 'hisi_qm_set_vft' drivers/crypto/hisilicon/qm.c:2620: warning: Function parameter or member 'qm' not described in 'qm_clear_queues' Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'Sihang Chen
The 'qm->curr_qm_qp_num' is not initialized, which will result in failure to write the current_q file. Signed-off-by: Sihang Chen <chensihang1@hisilicon.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: hisilicon/zip - fix the return value when device is busyYang Shen
As before, when the ZIP device is too busy to creat a request, it will return '-EBUSY'. But the crypto process think the '-EBUSY' means a successful request and wait for its completion. So replace '-EBUSY' with '-EAGAIN' to show crypto this request is failed. Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...") Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: hisilicon/zip - fix zero length input in GZIP decompressZhou Wang
The zero length input will cause a call trace when use GZIP decompress like this: Unable to handle kernel paging request at virtual address ... lr : get_gzip_head_size+0x7c/0xd0 [hisi_zip] Judge the input length and return '-EINVAL' when input is invalid. Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...") Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: hisilicon/zip - fix the uncleared debug registersHao Fang
ZIP debug registers aren't cleared even if its driver is removed, so add a clearing operation when remove driver. Signed-off-by: Hao Fang <fanghao11@huawei.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/qm - remove the update of flagsWeili Qian
'qm_init_qp_status' is just a help function to initiate some 'QP' status. 'QP' status should be updated separately. This patch removes the updating flags in 'QP' status. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/qm - fix wrong return type of 'pci_get_drvdata'Yang Shen
The parameter type of 'pci_set_drvdata' is 'struct hisi_qm', so here the return type of 'pci_get_drvdata' should be 'struct hisi_qm' too. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/hpre - fix a bug in dh algorithmMeng Yu
Using 'g' not equal to 2 in dh algorithm may cause an error like this: arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received: dh: Party A: generate public key test failed. err -22 11375.065672] dh alg: dh: test failed on vector 1, err=-22 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000790000000010 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000120800000080 hpre-dh self test failed arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000 arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000790000000010 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000120800000083 arm-smmu-v3 arm-smmu-v3.1.auto: 0x00000000000000c0 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000 arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000790000000010 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000120800000081 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000040 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000 arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received: arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000790000000010 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000120800000082 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000080 arm-smmu-v3 arm-smmu-v3.1.auto: 0x0000000000000000 hisi_hpre 0000:79:00.0: dat_rd_poison_int_set [error status=0x8] found hisi_hpre 0000:79:00.0: ooo_rdrsp_err_int_set [error status=0xfc00] found hisi_hpre 0000:79:00.0: Controller resetting... hisi_hpre 0000:79:00.0: Controller reset complete {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 {2}[Hardware Error]: event severity: recoverable {2}[Hardware Error]: Error 0, type: recoverable {2}[Hardware Error]: section type: unknown, c8b328a8-9917-4af6-9a13-2e08ab2e7586 {2}[Hardware Error]: section length: 0x4c as we missed initiating 'msg->in'. Fixes: c8b4b477079d("crypto: hisilicon - add HiSilicon HPRE accelerator") Signed-off-by: Meng Yu <yumeng18@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/hpre - adjust some coding styleMeng Yu
Adjust some coding style to make code aligned. Signed-off-by: Meng Yu <yumeng18@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/hpre - remove useless codeMeng Yu
1. Remove unused member 'debug_root' in 'struct hpre_debug'; 2. The u64 cast is redundant in 'cpu_to_le64'. Fixes: 848974151618("crypto: hisilicon - Add debugfs for HPRE") Fixes: dadbe4c11753("crypto: hisilicon/hpre - update debugfs ...") Signed-off-by: Meng Yu <yumeng18@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/qm - Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon - fixed memory allocation errorLongfang Liu
1. Fix the bug of 'mac' memory leak as allocating 'pbuf' failing. 2. Fix the bug of 'qps' leak as allocating 'qp_ctx' failing. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon - update ZIP module parameter descriptionLongfang Liu
In order to pass kernel CRYPTO test, ZIP module parameter 'pf_q_num' needs to be set as greater than 1. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon - update SEC module parameter descriptionLongfang Liu
In order to pass kernel CRYPTO test, SEC module parameter 'pf_q_num' needs to be set as greater than 1. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon - update HPRE module parameter descriptionLongfang Liu
In order to pass kernel CRYPTO test, HPRE module parameter 'pf_q_num' needs to be set as greater than 1. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon - update mininum queueLongfang Liu
At present, as HPRE/SEC/ZIP modules' parameter 'pf_q_num' is 1, kernel CRYPTO test will fail on the algorithms from the modules, since 'QP' hardware resources are not enough for CRYPTO TFM. To fix this, the minimum value of 'pf_q_num' should be 2. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon/zip - fix some coding stylesYang Shen
1.Unified alignment styles 2.Remove unnecessary goto branch 3.Remove address printf Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon/zip - supplement some commentsYang Shen
Supplement some comments. Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon/zip - move some private macros from 'zip.h' to 'zip_crypto.c'Yang Shen
Some macros which are defined in 'zip.h' are related to the struct 'hisi_zip_sqe' and are only used in 'zip_crypto.c'. So move them from 'zip.h' to 'zip_crypto.c'. Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 08:15:34 +0000