summaryrefslogtreecommitdiff
path: root/drivers/crypto/caam
AgeCommit message (Collapse)Author
2013-01-03Drivers: crypto: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: - Optimised AES/SHA1 for ARM. - IPsec ESN support in talitos and caam. - x86_64/avx implementation of cast5/cast6. - Add/use multi-algorithm registration helpers where possible. - Added IBM Power7+ in-Nest support. - Misc fixes. Fix up trivial conflicts in crypto/Kconfig due to the sparc64 crypto config options being added next to the new ARM ones. [ Side note: cut-and-paste duplicate help texts make those conflicts harder to read than necessary, thanks to git being smart about minimizing conflicts and maximizing the common parts... ] * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits) crypto: x86/glue_helper - fix storing of new IV in CBC encryption crypto: cast5/avx - fix storing of new IV in CBC encryption crypto: tcrypt - add missing tests for camellia and ghash crypto: testmgr - make test_aead also test 'dst != src' code paths crypto: testmgr - make test_skcipher also test 'dst != src' code paths crypto: testmgr - add test vectors for CTR mode IV increasement crypto: testmgr - add test vectors for partial ctr(cast5) and ctr(cast6) crypto: testmgr - allow non-multi page and multi page skcipher tests from same test template crypto: caam - increase TRNG clocks per sample crypto, tcrypt: remove local_bh_disable/enable() around local_irq_disable/enable() crypto: tegra-aes - fix error return code crypto: crypto4xx - fix error return code crypto: hifn_795x - fix error return code crypto: ux500 - fix error return code crypto: caam - fix error IDs for SEC v5.x RNG4 hwrng: mxc-rnga - Access data via structure hwrng: mxc-rnga - Adapt clocks to new i.mx clock framework crypto: caam - add IPsec ESN support crypto: 842 - remove .cra_list initialization Revert "[CRYPTO] cast6: inline bloat--" ...
2012-09-27crypto: caam - increase TRNG clocks per sampleKim Phillips
we need to configure the TRNG to use more clocks per sample to handle the two back-to-back 64KiB random descriptor requests on higher frequency P5040s. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-27crypto: caam - fix error IDs for SEC v5.x RNG4Horia Geanta
According to SEC v5.0-v5.3 reference manuals. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-07crypto: caam - add IPsec ESN supportHoria Geanta
Support for ESNs (extended sequence numbers). Tested with strongswan by connecting back-to-back P1010RDB with P2020RDB. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-07crypto: caam - coccicheck fixesKim Phillips
use true/false for bool, fix code alignment, and fix two allocs with no test. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-09-07crypto/caam: Export gen_split_key symbol for other modulesBen Collins
In 3.6-rc3, without this patch, the following error occurs with a modular build: ERROR: "gen_split_key" [drivers/crypto/caam/caamhash.ko] undefined! ERROR: "gen_split_key" [drivers/crypto/caam/caamalg.ko] undefined! Signed-off-by: Ben Collins <ben.c@servergy.com> Cc: Yuan Kang <Yuan.Kang@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-20crypto: caam - fix possible deadlock conditionKim Phillips
commit "crypto: caam - use non-irq versions of spinlocks for job rings" made two bad assumptions: (a) The caam_jr_enqueue lock isn't used in softirq context. Not true: jr_enqueue can be interrupted by an incoming net interrupt and the received packet may be sent for encryption, via caam_jr_enqueue in softirq context, thereby inducing a deadlock. This is evidenced when running netperf over an IPSec tunnel between two P4080's, with spinlock debugging turned on: [ 892.092569] BUG: spinlock lockup on CPU#7, netperf/10634, e8bf5f70 [ 892.098747] Call Trace: [ 892.101197] [eff9fc10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.107563] [eff9fc50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.113399] [eff9fc80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.118889] [eff9fc90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.124550] [eff9fcd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129625] BUG: spinlock lockup on CPU#5, swapper/5/0, e8bf5f70 [ 892.129629] Call Trace: [ 892.129637] [effa7c10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.129645] [effa7c50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.129652] [effa7c80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.129660] [effa7c90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.129666] [effa7cd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129674] [effa7d00] [c0509724] esp_input+0x178/0x334 [ 892.129681] [effa7d50] [c0519778] xfrm_input+0x77c/0x818 [ 892.129688] [effa7da0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.129697] [effa7db0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.129703] [effa7de0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.129709] [effa7e10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.129715] [effa7e80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.129726] [effa7eb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.129732] [effa7ef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.129742] [effa7f10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.129748] [effa7f40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.129754] [effa7f60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.129763] [effa7fa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.129769] [effa7ff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.129775] [ebacfe70] [c0004868] do_softirq+0xd8/0x104 [ 892.129780] [ebacfe90] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.129786] [ebacfea0] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.129792] [ebacfed0] [c000fad8] ret_from_except+0x0/0x18 [ 892.129798] [ebacff90] [c0009010] cpu_idle+0x94/0xf0 [ 892.129804] [ebacffb0] [c059ff88] start_secondary+0x42c/0x430 [ 892.129809] [ebacfff0] [c0001e28] __secondary_start+0x30/0x84 [ 892.281474] [ 892.282959] [eff9fd00] [c0509724] esp_input+0x178/0x334 [ 892.288186] [eff9fd50] [c0519778] xfrm_input+0x77c/0x818 [ 892.293499] [eff9fda0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.299074] [eff9fdb0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.304907] [eff9fde0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.309872] [eff9fe10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.315966] [eff9fe80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.321803] [eff9feb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.326855] [eff9fef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.333212] [eff9ff10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.338872] [eff9ff40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.344271] [eff9ff60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.349846] [eff9ffa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.355338] [eff9fff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.360910] [e7169950] [c0004868] do_softirq+0xd8/0x104 [ 892.366135] [e7169970] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.371101] [e7169980] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.375979] [e71699b0] [c000fad8] ret_from_except+0x0/0x18 [ 892.381466] [e7169a70] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.387127] [e7169ab0] [c044ad4c] aead_givencrypt+0x6ac/0xa70 [ 892.392873] [e7169b20] [c050a0b8] esp_output+0x2b4/0x570 [ 892.398186] [e7169b80] [c0519b9c] xfrm_output_resume+0x248/0x7c0 [ 892.404194] [e7169bb0] [c050e89c] xfrm4_output_finish+0x18/0x28 [ 892.410113] [e7169bc0] [c050e8f4] xfrm4_output+0x48/0x98 [ 892.415427] [e7169bd0] [c04beac0] ip_local_out+0x48/0x98 [ 892.420740] [e7169be0] [c04bec7c] ip_queue_xmit+0x16c/0x490 [ 892.426314] [e7169c10] [c04d6128] tcp_transmit_skb+0x35c/0x9a4 [ 892.432147] [e7169c70] [c04d6f98] tcp_write_xmit+0x200/0xa04 [ 892.437808] [e7169cc0] [c04c8ccc] tcp_sendmsg+0x994/0xcec [ 892.443213] [e7169d40] [c04eebfc] inet_sendmsg+0xd0/0x164 [ 892.448617] [e7169d70] [c04792f8] sock_sendmsg+0x8c/0xbc [ 892.453931] [e7169e40] [c047aecc] sys_sendto+0xc0/0xfc [ 892.459069] [e7169f10] [c047b934] sys_socketcall+0x110/0x25c [ 892.464729] [e7169f40] [c000f480] ret_from_syscall+0x0/0x3c (b) since the caam_jr_dequeue lock is only used in bh context, then semantically it should use _bh spin_lock types. spin_lock_bh semantics are to disable back-halves, and used when a lock is shared between softirq (bh) context and process and/or h/w IRQ context. Since the lock is only used within softirq context, and this tasklet is atomic, there is no need to do the additional work to disable back halves. This patch adds back-half disabling protection to caam_jr_enqueue spin_locks to fix (a), and drops it from caam_jr_dequeue to fix (b). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01crypto: caam - set descriptor sharing type to SERIALKim Phillips
SHARE_WAIT, whilst more optimal for association-less crypto, has the ability to start thrashing the CCB descriptor/key caches, given high levels of traffic across multiple security associations (and thus keys). Switch to using the SERIAL sharing type, which prefers the last used CCB for the SA. On a 2-DECO platform such as the P3041, this can improve performance by about 3.7%. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01crypto: caam - add backward compatible string sec4.0Shengzhou Liu
In some device trees of previous version, there were string "fsl,sec4.0". To be backward compatible with device trees, we first check "fsl,sec-v4.0", if it fails, then check for "fsl,sec4.0". Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> extended to include new hash and rng code, which was omitted from the previous version of this patch during a rebase of the SDK version. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01crypto: caam - fix possible deadlock conditionKim Phillips
commit "crypto: caam - use non-irq versions of spinlocks for job rings" made two bad assumptions: (a) The caam_jr_enqueue lock isn't used in softirq context. Not true: jr_enqueue can be interrupted by an incoming net interrupt and the received packet may be sent for encryption, via caam_jr_enqueue in softirq context, thereby inducing a deadlock. This is evidenced when running netperf over an IPSec tunnel between two P4080's, with spinlock debugging turned on: [ 892.092569] BUG: spinlock lockup on CPU#7, netperf/10634, e8bf5f70 [ 892.098747] Call Trace: [ 892.101197] [eff9fc10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.107563] [eff9fc50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.113399] [eff9fc80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.118889] [eff9fc90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.124550] [eff9fcd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129625] BUG: spinlock lockup on CPU#5, swapper/5/0, e8bf5f70 [ 892.129629] Call Trace: [ 892.129637] [effa7c10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.129645] [effa7c50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.129652] [effa7c80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.129660] [effa7c90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.129666] [effa7cd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129674] [effa7d00] [c0509724] esp_input+0x178/0x334 [ 892.129681] [effa7d50] [c0519778] xfrm_input+0x77c/0x818 [ 892.129688] [effa7da0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.129697] [effa7db0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.129703] [effa7de0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.129709] [effa7e10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.129715] [effa7e80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.129726] [effa7eb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.129732] [effa7ef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.129742] [effa7f10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.129748] [effa7f40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.129754] [effa7f60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.129763] [effa7fa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.129769] [effa7ff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.129775] [ebacfe70] [c0004868] do_softirq+0xd8/0x104 [ 892.129780] [ebacfe90] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.129786] [ebacfea0] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.129792] [ebacfed0] [c000fad8] ret_from_except+0x0/0x18 [ 892.129798] [ebacff90] [c0009010] cpu_idle+0x94/0xf0 [ 892.129804] [ebacffb0] [c059ff88] start_secondary+0x42c/0x430 [ 892.129809] [ebacfff0] [c0001e28] __secondary_start+0x30/0x84 [ 892.281474] [ 892.282959] [eff9fd00] [c0509724] esp_input+0x178/0x334 [ 892.288186] [eff9fd50] [c0519778] xfrm_input+0x77c/0x818 [ 892.293499] [eff9fda0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.299074] [eff9fdb0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.304907] [eff9fde0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.309872] [eff9fe10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.315966] [eff9fe80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.321803] [eff9feb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.326855] [eff9fef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.333212] [eff9ff10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.338872] [eff9ff40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.344271] [eff9ff60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.349846] [eff9ffa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.355338] [eff9fff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.360910] [e7169950] [c0004868] do_softirq+0xd8/0x104 [ 892.366135] [e7169970] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.371101] [e7169980] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.375979] [e71699b0] [c000fad8] ret_from_except+0x0/0x18 [ 892.381466] [e7169a70] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.387127] [e7169ab0] [c044ad4c] aead_givencrypt+0x6ac/0xa70 [ 892.392873] [e7169b20] [c050a0b8] esp_output+0x2b4/0x570 [ 892.398186] [e7169b80] [c0519b9c] xfrm_output_resume+0x248/0x7c0 [ 892.404194] [e7169bb0] [c050e89c] xfrm4_output_finish+0x18/0x28 [ 892.410113] [e7169bc0] [c050e8f4] xfrm4_output+0x48/0x98 [ 892.415427] [e7169bd0] [c04beac0] ip_local_out+0x48/0x98 [ 892.420740] [e7169be0] [c04bec7c] ip_queue_xmit+0x16c/0x490 [ 892.426314] [e7169c10] [c04d6128] tcp_transmit_skb+0x35c/0x9a4 [ 892.432147] [e7169c70] [c04d6f98] tcp_write_xmit+0x200/0xa04 [ 892.437808] [e7169cc0] [c04c8ccc] tcp_sendmsg+0x994/0xcec [ 892.443213] [e7169d40] [c04eebfc] inet_sendmsg+0xd0/0x164 [ 892.448617] [e7169d70] [c04792f8] sock_sendmsg+0x8c/0xbc [ 892.453931] [e7169e40] [c047aecc] sys_sendto+0xc0/0xfc [ 892.459069] [e7169f10] [c047b934] sys_socketcall+0x110/0x25c [ 892.464729] [e7169f40] [c000f480] ret_from_syscall+0x0/0x3c (b) since the caam_jr_dequeue lock is only used in bh context, then semantically it should use _bh spin_lock types. spin_lock_bh semantics are to disable back-halves, and used when a lock is shared between softirq (bh) context and process and/or h/w IRQ context. Since the lock is only used within softirq context, and this tasklet is atomic, there is no need to do the additional work to disable back halves. This patch adds back-half disabling protection to caam_jr_enqueue spin_locks to fix (a), and drops it from caam_jr_dequeue to fix (b). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11crypto: caam - ERA retrieval and printing for SEC deviceAlex Porosanu
This patch adds support for retrieving and printing of SEC ERA information. It is useful for knowing beforehand what features exist from the SEC point of view on a certain SoC. Only era-s 1 to 4 are currently supported; other eras will appear as unknown. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> - rebased onto current cryptodev master - made caam_eras static Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11crypto: caam - Using alloc_coherent for caam job ringsBharat Bhushan
The caam job rings (input/output job ring) are allocated using dma_map_single(). These job rings can be visualized as the ring buffers in which the jobs are en-queued/de-queued. The s/w enqueues the jobs in input job ring which h/w dequeues and after processing it copies the jobs in output job ring. Software then de-queues the job from output ring. Using dma_map/unmap_single() is not preferred way to allocate memory for this type of requirements because this adds un-necessary complexity. Example, if bounce buffer (SWIOTLB) will get used then to make any change visible in this memory to other processing unit requires dmap_unmap_single() or dma_sync_single_for_cpu/device(). The dma_unmap_single() can not be used as this will free the bounce buffer, this will require changing the job rings on running system and I seriously doubt that it will be not possible or very complex to implement. Also using dma_sync_single_for_cpu/device() will also add unnecessary complexity. The simple and preferred way is using dma_alloc_coherent() for these type of memory requirements. This resolves the Linux boot crash issue when "swiotlb=force" is set in bootargs on systems which have memory more than 4G. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - one tasklet per job ringKim Phillips
there is no noticeable benefit for multiple cores to process one job ring's output ring: in fact, we can benefit from cache effects of having the back-half stay on the core that receives a particular ring's interrupts, and further relax general contention and the locking involved with reading outring_used, since tasklets run atomically. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - consolidate memory barriers from job ring en/dequeueKim Phillips
Memory barriers are implied by the i/o register write implementation (at least on Power). So we can remove the redundant wmb() in caam_jr_enqueue, and, in dequeue(), hoist the h/w done notification write up to before we need to increment the head of the ring, and save an smp_mb. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - only query h/w in job ring dequeue pathKim Phillips
Code was needlessly checking the s/w job ring when there would be nothing to process if the h/w's output completion ring were empty anyway. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - use non-irq versions of spinlocks for job ringsKim Phillips
The enqueue lock isn't used in any interrupt context, and the dequeue lock isn't used in the h/w interrupt context, only in bh context. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - disable IRQ coalescing by defaultKim Phillips
It has been observed that in zero-loss benchmarks, when a slow traffic rate is being tested, the IRQ timer coalescing parameter was set too high, and the ethernet controller would start dropping packets because the job ring back half wouldn't be executed in time before the ethernet controller would fill its buffers, thereby significantly reducing the zero-loss performance figures. Empirical testing has shown that the best zero-loss performance is achieved when IRQ coalescing is set to minimum values and/or turned off, since apparently the job ring driver already implements an adequately-performing general-purpose IRQ mitigation strategy in software. Whilst we could go with minimal count (2-8) and timing settings (192-256), we prefer just turning h/w coalescing altogether off to minimize setkey latency (due to split key generation), and for consistent cross-SoC performance (the SEC vs. core clock ratio changes). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - add support for SEC v5.x RNG4Kim Phillips
The SEC v4.x' RNGB h/w block self-initialized. RNG4, available on SEC versions 5 and beyond, is based on a different standard that requires manual initialization. Also update any new errors From the SEC v5.2 reference manual: The SEC v5.2's RNG4 unit reuses some error IDs, thus the addition of rng_err_id_list over the CHA-independent err_id_list. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - assign 40-bit masks on SEC v5.0 and aboveKim Phillips
SEC v4.x were only 36-bit, SEC v5+ are 40-bit capable. Also set a DMA mask for any job ring devices created. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - hwrng supportYuan Kang
caam_read copies random bytes from two buffers into output. caam rng can fill empty buffer 0xffff bytes at a time, but the buffer sizes are rounded down to multiple of cacheline size. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - chaining supportYuan Kang
support chained scatterlists for aead, ablkcipher and ahash. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> - fix dma unmap leak - un-unlikely src == dst, due to experience with AF_ALG Signed-off-by: Kudupudi Ugendreshwar <B38865@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - unkeyed ahash supportYuan Kang
caam supports and registers unkeyed sha algorithms and md5. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - ahash hmac supportYuan Kang
caam supports ahash hmac with sha algorithms and md5. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - link_tbl renameYuan Kang
- rename scatterlist and link_tbl functions - link_tbl changed to sec4_sg - sg_to_link_tbl_one changed to dma_to_sec4_sg_one, since no scatterlist is use Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - refactor key_gen, sgYuan Kang
create separate files for split key generation and scatterlist functions. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - remove jr register/deregisterYuan Kang
remove caam_jr_register and caam_jr_deregister to allow sharing of job rings. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - support external seq in/out lengthsYuan Kang
functions for external storage of seq in/out lengths, i.e., for 32-bit lengths. These type-dependent functions automatically determine whether to store the length internally (embedded in the command header word) or externally (after the address pointer), based on size of the type given. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - add PDB (Protocol Descriptor Block) definitionsHemant Agrawal
Add a PDB header file to support building protocol descriptors. Signed-off-by: Steve Cornelius <sec@pobox.com> Signed-off-by: Hemant Agrawal <hemant@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - fix descriptor length adjustments for protocol descriptorsKim Phillips
init_desc, by always ORing with 1 for the descriptor header inclusion into the descriptor length, and init_sh_desc_pdb, by always specifying the descriptor length modification for the PDB via options, would not allow for odd length PDBs to be embedded in the constructed descriptor length. Fix this by simply changing the OR to an addition. also round-up pdb_bytes to the next SEC command unit size, to allow for, e.g., optional packet header bytes that aren't a multiple of CAAM_CMD_SZ. Reported-by: Radu-Andrei BULIE <radu.bulie@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Cc: Yashpal Dutta <yashpal.dutta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - fix start index for Protocol shared descriptorsYashpal Dutta
In case of protocol acceleration descriptors, Shared descriptor header must carry size of header length + PDB length in words which will be skipped by DECO while processing descriptor to provide first command word offset Signed-off-by: Yashpal Dutta <yashpal.dutta@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - fix input job ring element dma mapping sizeKim Phillips
SEC4 h/w gets configured in 32- vs. 36-bit physical addressing modes depending on the size of dma_addr_t, which is not always equal to sizeof(u32 *). Also fixed alignment of a dma_unmap call whilst in there. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-06-27crypto: caam - remove line continuations from ablkcipher_append_src_dstKim Phillips
presumably leftovers from possible macro development. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-29crypto: caam - add backward compatible string sec4.0Shengzhou Liu
In some device trees of previous version, there were string "fsl,sec4.0". To be backward compatible with device trees, we have CAAM driver first check "fsl,sec-v4.0", if it fails, then check for "fsl,sec4.0". Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-01-26crypto: caam - fix gcc 4.6 warningKim Phillips
drivers/crypto/caam/ctrl.c: In function 'caam_probe': drivers/crypto/caam/ctrl.c:49:6: warning: unused variable 'd' [-Wunused-variable] Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-01-13crypto: caam - be less noisy on startupKim Phillips
sha224 and 384 support extends caam noise to 21 lines. Do the same as commit 5b859b6 "crypto: talitos - be less noisy on startup", but for caam, and display: caam ffe300000.crypto: fsl,sec-v4.0 algorithms registered in /proc/crypto Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-01-13crypto: caam - add sha224 and sha384 variants to existing AEAD algorithmsHemant Agrawal
Signed-off-by: Hemant Agrawal <hemant@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-01-13crypto: Add CRYPTO_ALG_KERN_DRIVER_ONLY flagNikos Mavrogiannopoulos
The added CRYPTO_ALG_KERN_DRIVER_ONLY indicates whether a cipher is only available via a kernel driver. If the cipher implementation might be available by using an instruction set or by porting the kernel code, then it must not be set. Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: caam - remove DECO access initialization codeKim Phillips
Access to the SEC4 DECOs (DEscriptor COntrollers) (for debug purposes) isn't supported or used, and its register access initialization code erroneously makes illegal i/o accesses that show up as errors when run under simulation. Remove it until proper support (via DECORR) is added. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: caam - fix polarity of "propagate error" logicKim Phillips
the polarity of the definition for error propagation was reverse in the initial desc.h. Fix desc.h and its users. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: caam - more desc.h cleanupsKim Phillips
manual removal of double-spaces - no non-whitespace changes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: caam - desc.h - convert spaces to tabsKim Phillips
this is the result of running unexpand -a on desc.h. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-30crypto: convert drivers/crypto/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/crypto/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: James Hsiao <jhsiao@amcc.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: caam - add support for MD5 algorithm variantsKim Phillips
specifically, add these algorithm combinations: authenc-hmac-md5-cbc-aes-caam authenc-hmac-md5-cbc-des3_ede-caam authenc-hmac-md5-cbc-des-caam Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: fs: take the ACL checks to common code bury posix_acl_..._masq() variants kill boilerplates around posix_acl_create_masq() generic_acl: no need to clone acl just to push it to set_cached_acl() kill boilerplate around posix_acl_chmod_masq() reiserfs: cache negative ACLs for v1 stat format xfs: cache negative ACLs if there is no attribute fork 9p: do no return 0 from ->check_acl without actually checking vfs: move ACL cache lookup into generic code CIFS: Fix oops while mounting with prefixpath xfs: Fix wrong return value of xfs_file_aio_write fix devtmpfs race caam: don't pass bogus S_IFCHR to debugfs_create_...() get rid of create_proc_entry() abuses - proc_mkdir() is there for purpose asus-wmi: ->is_visible() can't return negative fix jffs2 ACLs on big-endian with 16bit mode_t 9p: close ACL leaks ocfs2_init_acl(): fix a leak VFS : mount lock scalability for internal mounts
2011-07-24caam: don't pass bogus S_IFCHR to debugfs_create_...()Al Viro
it will be replaced with S_IFREG anyway Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-15crypto: caam - ablkcipher supportYuan Kang
caam now supports encrypt and decrypt for aes, des and 3des Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: caam - faster aead implementationYuan Kang
Job descriptors only contain header and seq pointers. Other commands are stored in separate shared descriptors for encrypt, decrypt and givencrypt, stored as arrays in caam_ctx. This requires additional macros to create math commands to calculate assoclen and cryptlen. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: caam - structure renamingYuan Kang
caam_ctx.key_phys to key_dma caam_alg_template supports multiple algorithm types listed in union, which requires cases for different types in function caam_alg_alloc Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: caam - shorter namesYuan Kang
"aead_authenc" and "ipsec_esp" changed to "aead," except for function "ipsec_esp," which is changed to "init_aead_job." Variable name of aead_request structures changed to "req" and name of aead_givcrypt_request structure changed to "areq" Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 00:14:04 +0000