summaryrefslogtreecommitdiff
path: root/drivers/cpuidle
AgeCommit message (Collapse)Author
2014-08-14Merge tag 'pm+acpi-3.17-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are a couple of regression fixes, cpuidle menu governor optimizations, fixes for ACPI proccessor and battery drivers, hibernation fix to avoid problems related to the e820 memory map, fixes for a few cpufreq drivers and a new version of the suspend profiling tool analyze_suspend.py. Specifics: - Fix for an ACPI-based device hotplug regression introduced in 3.14 that causes a kernel panic to trigger when memory hot-remove is attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen - Fix for a cpufreq regression introduced in 3.16 that triggers a "sleeping function called from invalid context" bug in dev_pm_opp_init_cpufreq_table() from Stephen Boyd - ACPI battery driver fix for a warning message added in 3.16 that prints silly stuff sometimes from Mariusz Ceier - Hibernation fix for safer handling of mismatches in the 820 memory map between the configurations during image creation and during the subsequent restore from Chun-Yi Lee - ACPI processor driver fix to handle CPU hotplug notifications correctly during system suspend/resume from Lan Tianyu - Series of four cpuidle menu governor cleanups that also should speed it up a bit from Mel Gorman - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann and Uwe Kleine-König - Version 3.0 of the analyze_suspend.py suspend profiling tool from Todd E Brandt" * tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Fix warning message in acpi_battery_get_state() PM / tools: analyze_suspend.py: update to v3.0 cpufreq: arm_big_little: fix module license spec cpufreq: speedstep-smi: fix decimal printf specifiers ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove() cpufreq: OPP: Avoid sleeping while atomic cpufreq: cpu0: Do not print error message when deferring cpufreq: integrator: Use set_cpus_allowed_ptr PM / hibernate: avoid unsafe pages in e820 reserved regions ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events cpuidle: menu: Lookup CPU runqueues less cpuidle: menu: Call nr_iowait_cpu less times cpuidle: menu: Use ktime_to_us instead of reinventing the wheel cpuidle: menu: Use shifts when calculating averages where possible
2014-08-09ARM: EXYNOS: Fix suspend/resume sequencesTomasz Figa
Due to recent consolidation of Exynos suspend and cpuidle code, some parts of suspend and resume sequences are executed two times, once from exynos_pm_syscore_ops and then from exynos_cpu_pm_notifier() and thus it breaks suspend, at least on Exynos4-based boards. In addition, simple core power down from a cpuidle driver could, in case of CPU 0 could result in calling functions that are specific to suspend and deeper idle states. This patch fixes the issue by moving those operations outside the CPU PM notifier into suspend and AFTR code paths. This leads to a bit of code duplication, but allows additional code simplification, so in the end more code is removed than added. Fixes: 85f9f90808b4 ("ARM: EXYNOS: Use the cpu_pm notifier for pm") Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: arm@kernel.org Signed-off-by: Tomasz Figa <t.figa@samsung.com> [b.zolnierkie: ported patch over current changes] [b.zolnierkie: fixed exynos_aftr_finisher() return value] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-07Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
2014-08-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree changes from Jiri Kosina: "Summer edition of trivial tree updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: fix two typos in watchdog-api.txt irq-gic: remove file name from heading comment MAINTAINERS: Add miscdevice.h to file list for char/misc drivers. scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference doc: replace "practise" with "practice" in Documentation befs: remove check for CONFIG_BEFS_RW scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY' drivers/usb/phy/phy.c: remove a leading space mfd: fix comment cpuidle: fix comment doc: hpfall.c: fix missing null-terminate after strncpy call usb: doc: hotplug.txt code typos kbuild: fix comment in Makefile.modinst SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION ARM: msm: Remove MSM_SCM crypto: Remove MPILIB_EXTRA doc: CN: remove dead link, kerneltrap.org no longer works media: update reference, kerneltrap.org no longer works hexagon: update reference, kerneltrap.org no longer works doc: LSM: update reference, kerneltrap.org no longer works ...
2014-08-06cpuidle: menu: Lookup CPU runqueues lessMel Gorman
The menu governer makes separate lookups of the CPU runqueue to get load and number of IO waiters but it can be done with a single lookup. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-06cpuidle: menu: Call nr_iowait_cpu less timesMel Gorman
menu_select() via inline functions calls nr_iowait_cpu() twice as much as necessary. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-06cpuidle: menu: Use ktime_to_us instead of reinventing the wheelMel Gorman
The ktime_to_us implementation is slightly better than the one implemented in menu.c. Use it Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-06cpuidle: menu: Use shifts when calculating averages where possibleMel Gorman
We use do_div even though the divisor will usually be a power-of-two unless there are unusual outliers. Use shifts where possible Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-05powerpc/cpuidle: Fix parsing of idle state flags from device-treeVaidyanathan Srinivasan
Flags from device-tree need to be parsed with accessors for interpreting correct value in little-endian. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Reviewed-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-29cpuidle: Remove time measurement in poll stateDaniel Lezcano
The time measurement is already done in the cpuidle framework in the 'cpuidle_enter_state' function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-29cpuidle: Remove manual selection of the multiple driver supportDaniel Lezcano
Like the coupled idle state, it is not up to the user to set this option but the driver to select it. Remove the interactive selection of this option. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-29cpuidle: ladder governor - use macro instead of hardcoded valueMohammad Merajul Islam Molla
use CPUIDLE_DRIVER_STATE_START, instead of hardcoded value 0. As, CPUIDLE_DRIVER_STATE_START can be 1/0 based on CONFIG_ARCH_HAS_CPU_RELAX is defined or not. Signed-off-by: Mohammad Merajul Islam Molla <meraj.enigma@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-29cpuidle: big_little: Fix build errorSachin Kamat
big_little CPU idle driver references functions defined in MCPM driver. Thus make it depend on MCPM to avoid the following errors: drivers/built-in.o: In function `bl_enter_powerdown': drivers/cpuidle/cpuidle-big_little.c:134: undefined reference to `mcpm_cpu_powered_up' drivers/built-in.o: In function `bl_powerdown_finisher': drivers/cpuidle/cpuidle-big_little.c:104: undefined reference to `mcpm_set_entry_vector' drivers/cpuidle/cpuidle-big_little.c:111: undefined reference to `mcpm_cpu_suspend' make: *** [vmlinux] Error 1 Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-28cpuidle: menu governor - remove unused macro STDDEV_THRESHMohammad Merajul Islam Molla
STDDEV_THRESH was once defined and used in menu governor. But now its no longer used anywhere. So removing the define. Signed-off-by: Mohammad Merajul Islam Molla <meraj.enigma@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-26Merge tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/soc Merge "mvebu SoC changes for v3.17 (round 4)" from Jason Cooper: - Armada XP - Fix return value check in pmsu code - Document URLs for new public datasheets (Thanks, Marvell & free-electrons!) - Armada 370/38x - Add cpuidle support - mvebu - Fix build when no platforms are selected - Update EBU SoC status in docs * tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu: (21 commits) Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ARM: mvebu: make the snoop disabling optional in mvebu_v7_pmsu_idle_prepare() ARM: mvebu: use a local variable to store the resume address ARM: mvebu: make the cpuidle initialization more generic ARM: mvebu: rename the armada_370_xp symbols to mvebu_v7 in pmsu.c ARM: mvebu: use the common function for Armada 375 SMP workaround ARM: mvebu: add a common function for the boot address work around ARM: mvebu: sort the #include of pmsu.c in alphabetic order ARM: mvebu: split again armada_370_xp_pmsu_idle_enter() in PMSU code ARM: mvebu: fix return value check in armada_xp_pmsu_cpufreq_init() clk: mvebu: extend clk-cpu for dynamic frequency scaling ARM: mvebu: extend PMSU code to support dynamic frequency scaling ... Conflicts: arch/arm/mach-mvebu/Kconfig drivers/cpuidle/cpuidle-armada-370-xp.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-24cpuidle: mvebu: add Armada 38x supportThomas Petazzoni
This commit adds the list of cpuidle states supported by the Armada 38x SoC in the cpuidle-mvebu-v7 driver, as well as the necessary logic around it to support this SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/1406120453-29291-14-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24cpuidle: mvebu: add Armada 370 supportThomas Petazzoni
This commit adds the list of cpuidle states supported by the Armada 370 SoC in the cpuidle-mvebu-v7 driver, as well as the necessary logic around it to support this SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/1406120453-29291-13-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-24cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7Gregory CLEMENT
This driver will be able to manage the cpuidle for more SoCs than just Armada 370 and XP. It will also support Armada 38x and potentially other SoC of the Marvell Armada EBU family. To take this into account, this patch renames the driver and its symbols. It also changes the driver name from cpuidle-armada-370-xp to cpuidle-armada-xp, because separate platform drivers will be registered for the other SoC types. This change must be done simultaneously in the cpuidle driver and in the PMSU code in order to remain bisectable. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/1406120453-29291-12-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-19cpuidle: fix permission for driver name sysfs nodeMohammad Merajul Islam Molla
cpuidle driver name sysfs node is read-only, so permissions should be 0444. Signed-off-by: Mohammad Merajul Islam Molla <meraj.enigma@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-19cpuidle: big.LITTLE: init driver for exynos5420Chander Kashyap
Add "samsung,exynos5420" compatible string to initialize generic big-little cpuidle driver for Exynos5420. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in configChander Kashyap
Add support to select generic big-little cpuidle driver for Samsung Exynos series SoC's. This is required for Exynos big-llittle SoC's eg, Exynos5420. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19cpuidle: big.LITTLE: add of_device_id structureChander Kashyap
This driver will be used by many big.Little Soc's. As of now it does string matching of hardcoded compatible string to init the driver. This comparison list will keep on growing with addition of new SoC's. Hence add of_device_id structure to collect the compatible strings of SoC's using this driver. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-09cpuidle: move idle traces to cpuidle_enter_state()Sandeep Tripathy
idle_exit event is the first event after a core exits idle state. So this should be traced before local irq is ebabled. Likewise idle_entry is the last event before a core enters idle state. This will ease visualising the cpu idle state from kernel traces. Signed-off-by: Sandeep Tripathy <sandeep.tripathy@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> [rjw: Subject, rebase] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-19cpuidle: fix commentAntonio Ospite
Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: "tuukka.tikkanen@linaro.org" <tuukka.tikkanen@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-18cpuidle: mvebu: Fix the name of the statesGregory CLEMENT
The length name of the states 2 was too long to fit in the allocated string (limited to 16 bytes). This lead to improper string displayed through sysfs. This patch shorten the name by removing the reference to Marvell and to the CPU as both are implicit. For coherency the same change have been done for the states 1. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-12Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc updates from Ben Herrenschmidt: "Here are the remaining bits I was mentioning earlier. Mostly bug fixes and new selftests from Michael (yay !). He also removed the WSP platform and A2 core support which were dead before release, so less clutter. One little "feature" I snuck in is the doorbell IPI support for non-virtualized P8 which speeds up IPIs significantly between threads of a core" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/book3s: Fix some ABIv2 issues in machine check code powerpc/book3s: Fix guest MC delivery mechanism to avoid soft lockups in guest. powerpc/book3s: Increment the mce counter during machine_check_early call. powerpc/book3s: Add stack overflow check in machine check handler. powerpc/book3s: Fix machine check handling for unhandled errors powerpc/eeh: Dump PE location code powerpc/powernv: Enable POWER8 doorbell IPIs powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entry powerpc/powernv: Fix killed EEH event powerpc: fix typo 'CONFIG_PMAC' powerpc: fix typo 'CONFIG_PPC_CPU' powerpc/powernv: Don't escalate non-existing frozen PE powerpc/eeh: Report frozen parent PE prior to child PE powerpc/eeh: Clear frozen state for child PE powerpc/powernv: Reduce panic timeout from 180s to 10s powerpc/xmon: avoid format string leaking to printk selftests/powerpc: Add tests of PMU EBBs selftests/powerpc: Add support for skipping tests selftests/powerpc: Put the test in a separate process group selftests/powerpc: Fix instruction loop for ABIv2 (LE) ...
2014-06-12Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more scheduler updates from Ingo Molnar: "Second round of scheduler changes: - try-to-wakeup and IPI reduction speedups, from Andy Lutomirski - continued power scheduling cleanups and refactorings, from Nicolas Pitre - misc fixes and enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Delete extraneous extern for to_ratio() sched/idle: Optimize try-to-wake-up IPI sched/idle: Simplify wake_up_idle_cpu() sched/idle: Clear polling before descheduling the idle thread sched, trace: Add a tracepoint for IPI-less remote wakeups cpuidle: Set polling in poll_idle sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...) sched: Rename capacity related flags sched: Final power vs. capacity cleanups sched: Remove remaining dubious usage of "power" sched: Let 'struct sched_group_power' care about CPU capacity sched/fair: Disambiguate existing/remaining "capacity" usage sched/fair: Change "has_capacity" to "has_free_capacity" sched/fair: Remove "power" from 'struct numa_stats' sched: Fix signedness bug in yield_to() sched/fair: Use time_after() in record_wakee() sched/balancing: Reduce the rate of needless idle load balancing sched/fair: Fix unlocked reads of some cfs_b->quota/period
2014-06-12Merge commit '3cf2f34' into sched/core, to fix build errorIngo Molnar
Fix this dependency on the locking tree's smp_mb*() API changes: kernel/sched/idle.c:247:3: error: implicit declaration of function ‘smp_mb__after_atomic’ [-Werror=implicit-function-declaration] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-11powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entryMichael Neuling
Currently when entering fastsleep we clear all LPCR PECE bits. This patch changes it to only clear the decrementer bit (ie. PECE1), which is the only bit we really need to clear here. This is needed if we want to set other wakeup causes like the PECEDH bit so we can use hypervisor doorbells on powernv. Also we no longer clear the MER bit as it should never be set in the host anyway. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: - three fixes for 3.15 that didn't make it in time - limited Octeon 3 support. - paravirtualization support - improvment to platform support for Netlogix SOCs. - add support for powering down the Malta eval board in software - add many instructions to the in-kernel microassembler. - add support for the BPF JIT. - minor cleanups of the BCM47xx code. - large cleanup of math emu code resulting in significant code size reduction, better readability of the code and more accurate emulation. - improvments to the MIPS CPS code. - support C3 power status for the R4k count/compare clock device. - improvments to the GIO support for older SGI workstations. - increase number of supported CPUs to 256; this can be reached on certain embedded multithreaded ccNUMA configurations. - various small cleanups, updates and fixes * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits) MIPS: IP22/IP28: Improve GIO support MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX DEC: Document the R4k MB ASIC mini interrupt controller DEC: Add self as the maintainer MIPS: Add microMIPS MSA support. MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents. MIPS: Replace obsolete strict_strto call with kstrto MIPS: BFP: Simplify code slightly. MIPS: Call find_vma with the mmap_sem held MIPS: Fix 'write_msa_##' inline macro. MIPS: Fix MSA toolchain support detection. mips: Update the email address of Geert Uytterhoeven MIPS: Add minimal defconfig for mips_paravirt MIPS: Enable build for new system 'paravirt' MIPS: paravirt: Add pci controller for virtio MIPS: Add code for new system 'paravirt' MIPS: Add functions for hypervisor call MIPS: OCTEON: Add OCTEON3 to __get_cpu_type MIPS: Add function get_ebase_cpunum MIPS: Add minimal support for OCTEON3 to c-r4k.c ...
2014-06-05cpuidle: Set polling in poll_idleAndy Lutomirski
poll_idle is the archetypal polling idle loop; tell the core idle code about it. This avoids pointless IPIs when all of the other cpuidle states are disabled. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: nicolas.pitre@linaro.org Cc: umgwanakikbuti@gmail.com Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/c65ce49615d338bae8fb79df5daffab19353c900.1401902905.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-04Merge tag 'pm+acpi-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next Pull ACPI and power management updates from Rafael Wysocki: "ACPICA is the leader this time (63 commits), followed by cpufreq (28 commits), devfreq (15 commits), system suspend/hibernation (12 commits), ACPI video and ACPI device enumeration (10 commits each). We have no major new features this time, but there are a few significant changes of how things work. The most visible one will probably be that we are now going to create platform devices rather than PNP devices by default for ACPI device objects with _HID. That was long overdue and will be really necessary to be able to use the same drivers for the same hardware blocks on ACPI and DT-based systems going forward. We're not expecting fallout from this one (as usual), but it's something to watch nevertheless. The second change having a chance to be visible is that ACPI video will now default to using native backlight rather than the ACPI backlight interface which should generally help systems with broken Win8 BIOSes. We're hoping that all problems with the native backlight handling that we had previously have been addressed and we are in a good enough shape to flip the default, but this change should be easy enough to revert if need be. In addition to that, the system suspend core has a new mechanism to allow runtime-suspended devices to stay suspended throughout system suspend/resume transitions if some extra conditions are met (generally, they are related to coordination within device hierarchy). However, enabling this feature requires cooperation from the bus type layer and for now it has only been implemented for the ACPI PM domain (used by ACPI-enumerated platform devices mostly today). Also, the acpidump utility that was previously shipped as a separate tool will now be provided by the upstream ACPICA along with the rest of ACPICA code, which will allow it to be more up to date and better supported, and we have one new cpuidle driver (ARM clps711x). The rest is improvements related to certain specific use cases, cleanups and fixes all over the place. Specifics: - ACPICA update to upstream version 20140424. That includes a number of fixes and improvements related to things like GPE handling, table loading, headers, memory mapping and unmapping, DSDT/SSDT overriding, and the Unload() operator. The acpidump utility from upstream ACPICA is included too. From Bob Moore, Lv Zheng, David Box, David Binderman, and Colin Ian King. - Fixes and cleanups related to ACPI video and backlight interfaces from Hans de Goede. That includes blacklist entries for some new machines and using native backlight by default. - ACPI device enumeration changes to create platform devices rather than PNP devices for ACPI device objects with _HID by default. PNP devices will still be created for the ACPI device object with device IDs corresponding to real PNP devices, so that change should not break things left and right, and we're expecting to see more and more ACPI-enumerated platform devices in the future. From Zhang Rui and Rafael J Wysocki. - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it to handle system suspend/resume on Asus T100 correctly. From Heikki Krogerus and Rafael J Wysocki. - PM core update introducing a mechanism to allow runtime-suspended devices to stay suspended over system suspend/resume transitions if certain additional conditions related to coordination within device hierarchy are met. Related PM documentation update and ACPI PM domain support for the new feature. From Rafael J Wysocki. - Fixes and improvements related to the "freeze" sleep state. They affect several places including cpuidle, PM core, ACPI core, and the ACPI battery driver. From Rafael J Wysocki and Zhang Rui. - Miscellaneous fixes and updates of the ACPI core from Aaron Lu, Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki. - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony Camuso, and Toshi Kani. - System suspend/resume optimization in the ACPI battery driver from Lan Tianyu. - OPP (Operating Performance Points) subsystem updates from Chander Kashyap, Mark Brown, and Nishanth Menon. - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat, Stratos Karafotis, and Viresh Kumar. - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q, s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris, Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and Viresh Kumar. - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug Smythies, and Stratos Karafotis. - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown. - Fix for the cpuidle menu governor from Chander Kashyap. - New ARM clps711x cpuidle driver from Alexander Shiyan. - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter, Fabian Frederick, Pali Rohár, and Sebastian Capella. - Intel RAPL (Running Average Power Limit) driver updates from Jacob Pan. - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick. - devfreq core updates from Chanwoo Choi and Paul Bolle. - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and Bartlomiej Zolnierkiewicz. - turbostat tool fix from Jean Delvare. - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra and Thomas Renninger. - New ACPI ec_access.c tool for poking at the EC in a safe way from Thomas Renninger" * tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits) ACPICA: Namespace: Remove _PRP method support. intel_pstate: Improve initial busy calculation intel_pstate: add sample time scaling intel_pstate: Correct rounding in busy calculation intel_pstate: Remove C0 tracking PM / hibernate: fixed typo in comment ACPI: Fix x86 regression related to early mapping size limitation ACPICA: Tables: Add mechanism to control early table checksum verification. ACPI / scan: use platform bus type by default for _HID enumeration ACPI / scan: always register ACPI LPSS scan handler ACPI / scan: always register memory hotplug scan handler ACPI / scan: always register container scan handler ACPI / scan: Change the meaning of missing .attach() in scan handlers ACPI / scan: introduce platform_id device PNP type flag ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI / scan: .match() callback for ACPI scan handlers ACPI / battery: wakeup the system only when necessary power_supply: allow power supply devices registered w/o wakeup source ...
2014-06-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull scheduler updates from Ingo Molnar: "The main scheduling related changes in this cycle were: - various sched/numa updates, for better performance - tree wide cleanup of open coded nice levels - nohz fix related to rq->nr_running use - cpuidle changes and continued consolidation to improve the kernel/sched/idle.c high level idle scheduling logic. As part of this effort I pulled cpuidle driver changes from Rafael as well. - standardized idle polling amongst architectures - continued work on preparing better power/energy aware scheduling - sched/rt updates - misc fixlets and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) sched/numa: Decay ->wakee_flips instead of zeroing sched/numa: Update migrate_improves/degrades_locality() sched/numa: Allow task switch if load imbalance improves sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice() sched: Initialize rq->age_stamp on processor start sched, nohz: Change rq->nr_running to always use wrappers sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance() sched: Use clamp() and clamp_val() to make sys_nice() more readable sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups() sched/numa: Fix initialization of sched_domain_topology for NUMA sched: Call select_idle_sibling() when not affine_sd sched: Simplify return logic in sched_read_attr() sched: Simplify return logic in sched_copy_attr() sched: Fix exec_start/task_hot on migrated tasks arm64: Remove TIF_POLLING_NRFLAG metag: Remove TIF_POLLING_NRFLAG sched/idle: Make cpuidle_idle_call() void sched/idle: Reflow cpuidle_idle_call() sched/idle: Delay clearing the polling bit ...
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-06-02Merge tag 'drivers-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC driver changes from Olof Johansson: "SoC-near driver changes that we're merging through our tree. Mostly because they depend on other changes we have staged, but in some cases because the driver maintainers preferred that we did it this way. This contains a largeish cleanup series of the omap_l3_noc bus driver, cpuidle rework for Exynos, some reset driver conversions and a long branch of TI EDMA fixes and cleanups, with more to come next release. The TI EDMA cleanups is a shared branch with the dmaengine tree, with a handful of Davinci-specific fixes on top. After discussion at last year's KS (and some more on the mailing lists), we are here adding a drivers/soc directory. The purpose of this is to keep per-vendor shared code that's needed by different drivers but that doesn't fit into the MFD (nor drivers/platform) model. We expect to keep merging contents for this hierarchy through arm-soc so we can keep an eye on what the vendors keep adding here and not making it a free-for-all to shove in crazy stuff" * tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM tty: serial: msm: Remove direct access to GSBI power: reset: keystone-reset: introduce keystone reset driver Documentation: dt: add bindings for keystone pll control controller Documentation: dt: add bindings for keystone reset driver soc: qcom: fix of_device_id table ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos ARM: EXYNOS: Move the driver to drivers/cpuidle directory ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c ARM: EXYNOS: Pass the AFTR callback to the platform_data ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier ARM: EXYNOS: Move the AFTR state function into pm.c ARM: EXYNOS: Encapsulate the AFTR code into a function ARM: EXYNOS: Disable cpuidle for exynos5440 ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle ARM: EXYNOS: Remove ifdef for scu_enable in pm ARM: EXYNOS: Move scu_enable in the cpu_pm notifier ARM: EXYNOS: Use the cpu_pm notifier for pm ...
2014-05-28cpuidle: cpuidle-cps: add MIPS CPS cpuidle driverPaul Burton
This patch adds a cpuidle driver for systems based around the MIPS Coherent Processing System (CPS) architecture. It supports four idle states: - The standard MIPS wait instruction. - The non-coherent wait, clock gated & power gated states exposed by the recently added pm-cps layer. The pm-cps layer is used to enter all the deep idle states. Since cores in the clock or power gated states cannot service interrupts, the gic_send_ipi_single function is modified to send a power up command for the appropriate core to the CPC in cases where the target CPU has marked itself potentially incoherent. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-05-26ARM: EXYNOS: Move the driver to drivers/cpuidle directoryDaniel Lezcano
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-16Merge branch 'cpuidle/3.16' of ↵Rafael J. Wysocki
git://git.linaro.org/people/daniel.lezcano/linux into pm-cpuidle Pull ARM cpuidle updates for v3.16 from Daniel Lezcano. * 'cpuidle/3.16' of git://git.linaro.org/people/daniel.lezcano/linux: ARM: clps711x: Add cpuidle driver
2014-05-08cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoCGregory CLEMENT
Add the wfi, cpu idle and cpu deep idle power states support for the Armada XP SoCs. All the latencies and the power consumption values used at the "armada_370_xp_idle_driver" structure are preliminary and will be modified in the future after running some measurements and analysis. Based on the work of Nadav Haklai. Signed-off-by: Nadav Haklai <nadavh@marvell.com> Link: https://lkml.kernel.org/r/1397488214-20685-11-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1397488214-20685-11-git-send-email-gregory.clement@free-electrons.com Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-07PM / suspend: Always use deepest C-state in the "freeze" sleep stateRafael J. Wysocki
If freeze_enter() is called, we want to bypass the current cpuidle governor and always use the deepest available (that is, not disabled) C-state, because we want to save as much energy as reasonably possible then and runtime latency constraints don't matter at that point, since the system is in a sleep state anyway. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Aubrey Li <aubrey.li@linux.intel.com>
2014-05-01cpuidle / menu: move repeated correction factor check to initChander Kashyap
In menu_select function we check for correction factor every time. If it is zero we are initializing to unity. Hence move it to init function and initialise by unity, hence avoid repeated comparisons. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tuukka Tikkanen <tuukka.tikkanen@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-01cpuidle / menu: Return (-1) if there are no suitable statesRafael J. Wysocki
If there is a PM QoS latency limit and all of the sufficiently shallow C-states are disabled, the cpuidle menu governor returns 0 which on some systems is CPUIDLE_DRIVER_STATE_START and shouldn't be returned if that C-state has been disabled. Fix the issue by modifying the menu governor to return (-1) in such situations. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-01cpuidle: Combine cpuidle_enabled() with cpuidle_select()Rafael J. Wysocki
Since both cpuidle_enabled() and cpuidle_select() are only called by cpuidle_idle_call(), it is not really useful to keep them separate and combining them will help to avoid complicating cpuidle_idle_call() even further if governors are changed to return error codes sometimes. This code modification shouldn't lead to any functional changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-30ARM: clps711x: Add cpuidle driverAlexander Shiyan
Add cpuidle support for ARM Cirrus Logic CLPS711X CPUs. This CPU has an unique internal register and write to this location will put the system into the Idle State by halting the clock to the processor until an interrupt is generated. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-08Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: sysfs: Export target residency information intel_idle: fine-tune IVT residency targets tools/power turbostat: Run on Broadwell tools/power turbostat: simplify output, add Avg_MHz intel_idle: Add CPU model 54 (Atom N2000 series) intel_idle: support Bay Trail intel_idle: allow sparse sub-state numbering, for Bay Trail ACPI idle: permit sparse C-state sub-state numbers
2014-04-08cpuidle: sysfs: Export target residency informationDaniel Lezcano
From user space, there is no way to know the target residency for each idle state. If we want to write tools to measure the accuracy of the idle state selection from the governor, we need this info. As the exit latency is exported through sysfs, exporting the target residency in the same place makes sense. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-02Merge branch 'sched-idle-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/idle changes from Ingo Molnar: "More idle code reorganization, to prepare for more integration. (Sent separately because it depended on pending timer work, which is now upstream)" * 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/idle: Add more comments to the code sched/idle: Move idle conditions in cpuidle_idle main function sched/idle: Reorganize the idle loop cpuidle/idle: Move the cpuidle_idle_call function to idle.c idle/cpuidle: Split cpuidle_idle_call main function into smaller functions