| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver specific changes from Arnd Bergmann:
"These changes are all driver specific and cross over between arm-soc
contents and some other subsystem, in these cases cpufreq, crypto,
dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
these changes merged through arm-soc.
As we proceed to untangle the dependencies between platform code and
driver code, the amount of changes in this category is fortunately
shrinking, for 3.11 we have 16 branches here and 101 non-merge
changesets, the majority of which are for the stedma40 dma engine
driver used in the ux500 platform. Cleaning up that code touches
multiple subsystems, but gets rid of the dependency in the end.
The mailbox code moved out from mach-omap2 to drivers/mailbox is an
intermediate step and is still omap specific at the moment. Patches
exist to generalize the subsystem and add other drivers with the same
API, but those did not make it for 3.11."
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
crypto: ux500: use dmaengine_submit API
crypto: ux500: use dmaengine_prep_slave_sg API
crypto: ux500: use dmaengine_device_control API
crypto: ux500/crypt: add missing __iomem qualifiers
crypto: ux500/hash: add missing static qualifiers
crypto: ux500/hash: use readl on iomem addresses
dmaengine: ste_dma40: Declare memcpy config as static
ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
ARM: ux500: Provide a AB8500 GPIO Device Tree node
gpio: rcar: fix gpio_rcar_of_table
gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
gpio-rcar: Reference core gpio documentation in the DT bindings
clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
ARM: dts: Update Samsung I2S documentation
ARM: dts: add clock provider information for i2s controllers in Exynos5250
ARM: dts: add Exynos audio subsystem clock controller node
clk: samsung: register audio subsystem clocks using common clock framework
ARM: dts: use #include for all device trees for Samsung
pinctrl: s3c24xx: use correct header for chained_irq functions
...
|
|
When initializing the default powersave_bias value, we need to first
make sure that this policy is running the ondemand governor.
Reported-and-tested-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
clk_set_rate() isn't supposed to accept approximate frequencies, instead
a supported frequency should be obtained from clk_round_rate() and then
used to set the clock.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Jiri Kosina <jkosina@suse.cz> and Borislav Petkov <bp@alien8.de>
reported the warning:
[ 51.616759] ------------[ cut here ]------------
[ 51.621460] WARNING: at arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x58/0x60()
[ 51.629638] Modules linked in: ext2 vfat fat loop snd_hda_codec_hdmi usbhid snd_hda_codec_realtek coretemp kvm_intel kvm snd_hda_intel snd_hda_codec crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hwdep snd_pcm aesni_intel sb_edac aes_x86_64 ehci_pci snd_page_alloc glue_helper snd_timer xhci_hcd snd iTCO_wdt iTCO_vendor_support ehci_hcd edac_core lpc_ich acpi_cpufreq lrw gf128mul ablk_helper cryptd mperf usbcore usb_common soundcore mfd_core dcdbas evdev pcspkr processor i2c_i801 button microcode
[ 51.675581] CPU: 0 PID: 244 Comm: kworker/1:1 Tainted: G W 3.10.0-rc1+ #10
[ 51.683407] Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013
[ 51.690901] Workqueue: events od_dbs_timer
[ 51.695069] 0000000000000009 ffff88043a2f5b68 ffffffff8161441c ffff88043a2f5ba8
[ 51.702602] ffffffff8103e540 0000000000000033 0000000000000001 ffff88043d5f8000
[ 51.710136] 00000000ffff0ce1 0000000000000001 ffff88044fc4fc08 ffff88043a2f5bb8
[ 51.717691] Call Trace:
[ 51.720191] [<ffffffff8161441c>] dump_stack+0x19/0x1b
[ 51.725396] [<ffffffff8103e540>] warn_slowpath_common+0x70/0xa0
[ 51.731473] [<ffffffff8103e58a>] warn_slowpath_null+0x1a/0x20
[ 51.737378] [<ffffffff81025628>] native_smp_send_reschedule+0x58/0x60
[ 51.744013] [<ffffffff81072cfd>] wake_up_nohz_cpu+0x2d/0xa0
[ 51.749745] [<ffffffff8104f6bf>] add_timer_on+0x8f/0x110
[ 51.755214] [<ffffffff8105f6fe>] __queue_delayed_work+0x16e/0x1a0
[ 51.761470] [<ffffffff8105f251>] ? try_to_grab_pending+0xd1/0x1a0
[ 51.767724] [<ffffffff8105f78a>] mod_delayed_work_on+0x5a/0xa0
[ 51.773719] [<ffffffff814f6b5d>] gov_queue_work+0x4d/0xc0
[ 51.779271] [<ffffffff814f60cb>] od_dbs_timer+0xcb/0x170
[ 51.784734] [<ffffffff8105e75d>] process_one_work+0x1fd/0x540
[ 51.790634] [<ffffffff8105e6f2>] ? process_one_work+0x192/0x540
[ 51.796711] [<ffffffff8105ef22>] worker_thread+0x122/0x380
[ 51.802350] [<ffffffff8105ee00>] ? rescuer_thread+0x320/0x320
[ 51.808264] [<ffffffff8106634a>] kthread+0xea/0xf0
[ 51.813200] [<ffffffff81066260>] ? flush_kthread_worker+0x150/0x150
[ 51.819644] [<ffffffff81623d5c>] ret_from_fork+0x7c/0xb0
[ 51.918165] nouveau E[ DRM] GPU lockup - switching to software fbcon
[ 51.930505] [<ffffffff81066260>] ? flush_kthread_worker+0x150/0x150
[ 51.936994] ---[ end trace f419538ada83b5c5 ]---
It was caused by the policy->cpus changed during the process of
__gov_queue_work(), in other word, cpu offline happened.
Use get/put_online_cpus() to prevent the offline from happening while
__gov_queue_work() is running.
[rjw: The problem has been present since recent commit 031299b
(cpufreq: governors: Avoid unnecessary per cpu timer interrupts)]
References: https://lkml.org/lkml/2013/6/5/88
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 4b31e774 (Always set P-state on initialization) fixed bug
#4634 and caused the driver to always set the target P-State at
least once since the initial P-State may not be the desired one.
Commit 5a1c0228 (cpufreq: Avoid calling cpufreq driver's target()
routine if target_freq == policy->cur) caused a regression in
this behavior.
This fixes the regression by setting policy->cur based on the CPU's
target frequency rather than the CPU's current reported frequency
(which may be different). This means that the P-State will be set
initially if the CPU's target frequency is different from the
governor's target frequency.
This fixes an issue where setting the default governor to
performance wouldn't correctly enable turbo mode on all cores.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.8+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
- Additional CPU ID for the intel_pstate driver from Dirk Brandewie.
- More cpufreq fixes related to ARM big.LITTLE support and locking from
Viresh Kumar.
- VIA C7 cpufreq build fix from Rafał Bilski.
- ACPI power management fix making it possible to use device power
states regardless of the CONFIG_PM setting from Rafael J Wysocki.
- New ACPI video blacklist item from Bastian Triller.
* tag 'pm+acpi-3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist
cpufreq: arm_big_little_dt: Instantiate as platform_driver
cpufreq: arm_big_little_dt: Register driver only if DT has valid data
cpufreq / e_powersaver: Fix linker error when ACPI processor is a module
cpufreq / intel_pstate: Add additional supported CPU ID
cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT
ACPI / PM: Allow device power states to be used for CONFIG_PM unset
|
|
As multiplatform build is being adopted by more and more ARM platforms, initcall
function should be used very carefully. For example, when both arm_big_little_dt
and cpufreq-cpu0 drivers are compiled in, arm_big_little_dt driver may try to
register even if we had platform device for cpufreq-cpu0 registered.
To eliminate this undesired the effect, the patch changes arm_big_little_dt
driver to have it instantiated as a platform_driver. Then it will only run on
platforms that create the platform_device "arm-bL-cpufreq-dt".
Reported-and-tested-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If arm_big_little_dt driver is enabled, then it will always try to register with
big LITTLE cpufreq core driver. In case DT doesn't have relevant data for cpu
nodes, i.e. operating points aren't present, then we should exit early and
shouldn't register with big LITTLE cpufreq core driver. Otherwise we will fail
continuously from the driver->init() routine.
This patch fixes this issue.
Reported-and-tested-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
on i386:
CONFIG_ACPI_PROCESSOR=m
CONFIG_X86_E_POWERSAVER=y
drivers/built-in.o: In function `eps_cpu_init.part.8':
e_powersaver.c:(.text.unlikely+0x2243): undefined reference to `acpi_processor_register_performance'
e_powersaver.c:(.text.unlikely+0x22a2): undefined reference to `acpi_processor_unregister_performance'
e_powersaver.c:(.text.unlikely+0x246b): undefined reference to `acpi_processor_get_bios_limit'
X86_E_POWERSAVER should also depend on ACPI_PROCESSOR.
Signed-off-by: Rafal Bilski <rafalbilski@interia.pl>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Without this, the
WARN_ON_ONCE(irqs_disabled());
in the idle loop will be triggered.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add CPU ID for Ivybrigde processor.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With the rwsem lock around
__cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT), we
get circular dependency when we call sysfs_remove_group().
======================================================
[ INFO: possible circular locking dependency detected ]
3.9.0-rc7+ #15 Not tainted
-------------------------------------------------------
cat/2387 is trying to acquire lock:
(&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at: [<c02f6179>] lock_policy_rwsem_read+0x25/0x34
but task is already holding lock:
(s_active#41){++++.+}, at: [<c00f9bf7>] sysfs_read_file+0x4f/0xcc
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (s_active#41){++++.+}:
[<c0055a79>] lock_acquire+0x61/0xbc
[<c00fabf1>] sysfs_addrm_finish+0xc1/0x128
[<c00f9819>] sysfs_hash_and_remove+0x35/0x64
[<c00fbe6f>] remove_files.isra.0+0x1b/0x24
[<c00fbea5>] sysfs_remove_group+0x2d/0xa8
[<c02f9a0b>] cpufreq_governor_interactive+0x13b/0x35c
[<c02f61df>] __cpufreq_governor+0x2b/0x8c
[<c02f6579>] __cpufreq_set_policy+0xa9/0xf8
[<c02f6b75>] store_scaling_governor+0x61/0x100
[<c02f6f4d>] store+0x39/0x60
[<c00f9b81>] sysfs_write_file+0xed/0x114
[<c00b3fd1>] vfs_write+0x65/0xd8
[<c00b424b>] sys_write+0x2f/0x50
[<c000cdc1>] ret_fast_syscall+0x1/0x52
-> #0 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}:
[<c0055253>] __lock_acquire+0xef3/0x13dc
[<c0055a79>] lock_acquire+0x61/0xbc
[<c03ee1f5>] down_read+0x25/0x30
[<c02f6179>] lock_policy_rwsem_read+0x25/0x34
[<c02f6edd>] show+0x21/0x58
[<c00f9c0f>] sysfs_read_file+0x67/0xcc
[<c00b40a7>] vfs_read+0x63/0xd8
[<c00b41fb>] sys_read+0x2f/0x50
[<c000cdc1>] ret_fast_syscall+0x1/0x52
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(s_active#41);
lock(&per_cpu(cpu_policy_rwsem, cpu));
lock(s_active#41);
lock(&per_cpu(cpu_policy_rwsem, cpu));
*** DEADLOCK ***
2 locks held by cat/2387:
#0: (&buffer->mutex){+.+.+.}, at: [<c00f9bcd>] sysfs_read_file+0x25/0xcc
#1: (s_active#41){++++.+}, at: [<c00f9bf7>] sysfs_read_file+0x4f/0xcc
stack backtrace:
[<c0011d55>] (unwind_backtrace+0x1/0x9c) from [<c03e9a09>] (print_circular_bug+0x19d/0x1e8)
[<c03e9a09>] (print_circular_bug+0x19d/0x1e8) from [<c0055253>] (__lock_acquire+0xef3/0x13dc)
[<c0055253>] (__lock_acquire+0xef3/0x13dc) from [<c0055a79>] (lock_acquire+0x61/0xbc)
[<c0055a79>] (lock_acquire+0x61/0xbc) from [<c03ee1f5>] (down_read+0x25/0x30)
[<c03ee1f5>] (down_read+0x25/0x30) from [<c02f6179>] (lock_policy_rwsem_read+0x25/0x34)
[<c02f6179>] (lock_policy_rwsem_read+0x25/0x34) from [<c02f6edd>] (show+0x21/0x58)
[<c02f6edd>] (show+0x21/0x58) from [<c00f9c0f>] (sysfs_read_file+0x67/0xcc)
[<c00f9c0f>] (sysfs_read_file+0x67/0xcc) from [<c00b40a7>] (vfs_read+0x63/0xd8)
[<c00b40a7>] (vfs_read+0x63/0xd8) from [<c00b41fb>] (sys_read+0x2f/0x50)
[<c00b41fb>] (sys_read+0x2f/0x50) from [<c000cdc1>] (ret_fast_syscall+0x1/0x52)
This lock isn't required while calling __cpufreq_governor(policy,
CPUFREQ_GOV_POLICY_EXIT). Remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch moves cpufreq driver of Samsung's ARM based
s3c24xx platform to drivers/cpufreq.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
The file permissions of cpufreq per-cpu sysfs files are not preserved
across suspend/resume because we internally go through the CPU
Hotplug path which reinitializes the file permissions on CPU online.
But the user is not supposed to know that we are using CPU hotplug
internally within suspend/resume (IOW, the kernel should not silently
wreck the user-set file permissions across a suspend cycle).
Therefore, we need to preserve the file permissions as they are
across suspend/resume.
The simplest way to achieve that is to just not touch the sysfs files
at all - ie., just ignore the CPU hotplug notifications in the
suspend/resume path (_FROZEN) in the cpufreq hotplug callback.
Reported-by: Robert Jarzmik <robert.jarzmik@intel.com>
Reported-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use vzalloc() instead of vmalloc() and memset(0).
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
I don't see how the virtual address of the tuners pointer would be of
any help to anyone so remove it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The driver can no longer be built as a module remove the compile fence
around cpufreq tracing call.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove dead code from the driver.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ffmpeg benchmark in the phoronix test suite has threads on
multiple cores that rely on the progress on of threads on other cores
and ping pong back and forth fast enough to make the core appear less
busy than it "should" be. If the core has been at minimum p-state for
a while bump the pstate up to kick the core to see if it is in this
ping pong state. If the core is truly idle the p-state will be
reduced at the next sample time. If the core makes more progress it
will send more work to the thread bringing both threads out of the
ping pong scenario and the p-state will be selected normally.
This fixes a performance regression of approximately 30%
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are two ways that the maximum p-state can be clamped, via a
policy change and via the sysfs file.
The acpi-thermal driver adjusts the p-state policy in response to
thermal events. These changes override the users settings at the
moment.
Use the lowest of the two requested values this ensures that we will
not exceed the requested pstate from either mechanism.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
calculations
Idle time is taken into account in the APERF/MPERF ratio calculation
there is no reason for the driver to track it seperately. This
reduces the work in the driver and makes the code more readable.
Removal of the tracking of sample duration removes the possibility of
the divide by zero exception when the duration is sub 1us
References: https://bugzilla.kernel.org/show_bug.cgi?id=56691
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Kconfig dependecies for ARM SA11xx drivers are incorrect, so fix
them.
[rjw: Changelog]
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This fixes usage of "depends on" and "select" options in Kconfig for ARM big
LITTLE cpufreq driver. Otherwise we get these warnings:
warning: (ARM_DT_BL_CPUFREQ) selects ARM_BIG_LITTLE_CPUFREQ which
has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && ARM &&
ARM_CPU_TOPOLOGY)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We are freeing parent node in success cases but not in failure cases.
Let's do it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With commit 1e4b545, regulator_get will now return -EPROBE_DEFER
when the cpu0-supply node is present, but the regulator is not yet
registered.
It is possible for this to occur when the regulator registration
by itself might be defered due to some dependent interface not yet
instantiated. For example: an regulator which uses I2C and GPIO might
need both systems available before proceeding, in this case, the
regulator might defer it's registration.
However, the cpufreq-cpu0 driver assumes that any un-successful
return result is equivalent of failure.
When the regulator_get returns failure other than -EPROBE_DEFER, it
makes sense to assume that supply node is not present and proceed
with the assumption that only clock control is necessary in the
platform.
With this change, we can now handle the following conditions:
a) cpu0-supply binding is not present, regulator_get will return
appropriate error result, resulting in cpufreq-cpu0 driver
controlling just the clock.
b) cpu0-supply binding is present, regulator_get returns
-EPROBE_DEFER, we retry resulting in cpufreq-cpu0 driver
registering later once the regulator is available.
c) cpu0-supply binding is present, regulator_get returns
-EPROBE_DEFER, however, regulator never registers, we retry until
cpufreq-cpu0 driver fails to register pointing at device tree
information bug. However, in this case, the fact that
cpufreq-cpu0 operates with clock only when the DT binding clearly
indicates need of a supply is a bug of it's own.
d) cpu0-supply gets an regulator at probe - cpufreq-cpu0 driver
controls both the clock and regulator
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We must call __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT) before
calling cpufreq_cpu_put(data), so that policy kobject have valid
fields. Otherwise, removing last online cpu of policy->cpus causes
this crash for ondemand/conservative governor.
[<c00fb076>] (sysfs_find_dirent+0xe/0xa8) from [<c00fb1bd>] (sysfs_get_dirent+0x21/0x58)
[<c00fb1bd>] (sysfs_get_dirent+0x21/0x58) from [<c00fc259>] (sysfs_remove_group+0x85/0xbc)
[<c00fc259>] (sysfs_remove_group+0x85/0xbc) from [<c02faad9>] (cpufreq_governor_dbs+0x369/0x4a0)
[<c02faad9>] (cpufreq_governor_dbs+0x369/0x4a0) from [<c02f66d7>] (__cpufreq_governor+0x2b/0x8c)
[<c02f66d7>] (__cpufreq_governor+0x2b/0x8c) from [<c02f6893>] (__cpufreq_remove_dev.isra.12+0x15b/0x250)
[<c02f6893>] (__cpufreq_remove_dev.isra.12+0x15b/0x250) from [<c03e91c7>] (cpufreq_cpu_callback+0x2f/0x3c)
[<c03e91c7>] (cpufreq_cpu_callback+0x2f/0x3c) from [<c0036fe1>] (notifier_call_chain+0x45/0x54)
[<c0036fe1>] (notifier_call_chain+0x45/0x54) from [<c001e611>] (__cpu_notify+0x1d/0x34)
[<c001e611>] (__cpu_notify+0x1d/0x34) from [<c03e5833>] (_cpu_down+0x63/0x1ac)
[<c03e5833>] (_cpu_down+0x63/0x1ac) from [<c03e5997>] (cpu_down+0x1b/0x30)
[<c03e5997>] (cpu_down+0x1b/0x30) from [<c03e60eb>] (store_online+0x27/0x54)
[<c03e60eb>] (store_online+0x27/0x54) from [<c0295629>] (dev_attr_store+0x11/0x18)
[<c0295629>] (dev_attr_store+0x11/0x18) from [<c00f9edd>] (sysfs_write_file+0xed/0x114)
[<c00f9edd>] (sysfs_write_file+0xed/0x114) from [<c00b42a9>] (vfs_write+0x65/0xd8)
[<c00b42a9>] (vfs_write+0x65/0xd8) from [<c00b4523>] (sys_write+0x2f/0x50)
[<c00b4523>] (sys_write+0x2f/0x50) from [<c000cdc1>] (ret_fast_syscall+0x1/0x52)
Of course this only impacted drivers which have
have_governor_per_policy set to true. i.e. big LITTLE cpufreq driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are two types of INIT/EXIT activities that we need to do for
governors:
- Done only once per governor (doesn't depend how many instances of
the governor there are). eg: cpufreq_register_notifier() for
conservative governor.
- Done per governor instance, eg: sysfs_{create|remove}_group().
There were some corner cases where current code isn't able to handle
them separately and so failing for some test cases.
We use two separate variables now for keeping track of above two
requirements.
- governor->initialized for first one
- dbs_data->usage_count for per governor instance
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The message printed at the end of driver->init() doesn't include the
"cpufreq" string at all and so is difficult to find in dmesg. Add
function name to that message to clearly state where the message is
coming from.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The cpu_to_cluster() function may be used by glue drivers, so it's
better to keep it in arm_big_little.h.
[rjw: Changelog]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If "/cpus" node isn't present or "clock-latency" isn't defined we are
returning error currently. Let's return CPUFREQ_ETERNAL instead, so
that we don't fail.
Flag appropriate messages to user in such cases.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
By mistake we are returning zero for successful call to
dt_get_transition_latency(), whereas we should return
transition_latency. Fix that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ARM big LITTLE cpufreq driver uses the OPP layer for its
functionality. Select it in Kconfig.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* pm-cpufreq:
cpufreq: Revert incorrect commit 5800043
|
|
Commit 5800043 (cpufreq: convert cpufreq_driver to using RCU) causes
the following call trace to be spit on boot:
BUG: sleeping function called from invalid context at /scratch/rafael/work/linux-pm/mm/slab.c:3179
in_atomic(): 0, irqs_disabled(): 0, pid: 292, name: systemd-udevd
2 locks held by systemd-udevd/292:
#0: (subsys mutex){+.+.+.}, at: [<ffffffff8146851a>] subsys_interface_register+0x4a/0xe0
#1: (rcu_read_lock){.+.+.+}, at: [<ffffffff81538210>] cpufreq_add_dev_interface+0x60/0x5e0
Pid: 292, comm: systemd-udevd Not tainted 3.9.0-rc8+ #323
Call Trace:
[<ffffffff81072c90>] __might_sleep+0x140/0x1f0
[<ffffffff811581c2>] kmem_cache_alloc+0x42/0x2b0
[<ffffffff811e7179>] sysfs_new_dirent+0x59/0x130
[<ffffffff811e63cb>] sysfs_add_file_mode+0x6b/0x110
[<ffffffff81538210>] ? cpufreq_add_dev_interface+0x60/0x5e0
[<ffffffff810a3254>] ? __lock_is_held+0x54/0x80
[<ffffffff811e647d>] sysfs_add_file+0xd/0x10
[<ffffffff811e6541>] sysfs_create_file+0x21/0x30
[<ffffffff81538280>] cpufreq_add_dev_interface+0xd0/0x5e0
[<ffffffff81538210>] ? cpufreq_add_dev_interface+0x60/0x5e0
[<ffffffffa000337f>] ? acpi_processor_get_platform_limit+0x32/0xbb [processor]
[<ffffffffa022f540>] ? do_drv_write+0x70/0x70 [acpi_cpufreq]
[<ffffffff810a3254>] ? __lock_is_held+0x54/0x80
[<ffffffff8106c97e>] ? up_read+0x1e/0x40
[<ffffffff8106e632>] ? __blocking_notifier_call_chain+0x72/0xc0
[<ffffffff81538dbd>] cpufreq_add_dev+0x62d/0xae0
[<ffffffff815389b8>] ? cpufreq_add_dev+0x228/0xae0
[<ffffffff81468569>] subsys_interface_register+0x99/0xe0
[<ffffffffa014d000>] ? 0xffffffffa014cfff
[<ffffffff81535d5d>] cpufreq_register_driver+0x9d/0x200
[<ffffffffa014d000>] ? 0xffffffffa014cfff
[<ffffffffa014d0e9>] acpi_cpufreq_init+0xe9/0x1000 [acpi_cpufreq]
[<ffffffff810002fa>] do_one_initcall+0x11a/0x170
[<ffffffff810b4b87>] load_module+0x1cf7/0x2920
[<ffffffff81322580>] ? ddebug_proc_open+0xb0/0xb0
[<ffffffff816baee0>] ? retint_restore_args+0xe/0xe
[<ffffffff810b5887>] sys_init_module+0xd7/0x120
[<ffffffff816bb6d2>] system_call_fastpath+0x16/0x1b
which is quite obvious, because that commit put (multiple instances
of) sysfs_create_file() under rcu_read_lock()/rcu_read_unlock(),
although sysfs_create_file() may cause memory to be allocated with
GFP_KERNEL and that may sleep, which is not permitted in RCU read
critical section.
Revert the buggy commit altogether along with some changes on top
of it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* pm-cpufreq: (57 commits)
cpufreq: MAINTAINERS: Add co-maintainer
cpufreq: pxa2xx: initialize variables
ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
cpufreq: cpu0: Put cpu parent node after using it
cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
cpufreq: ARM big LITTLE: put DT nodes after using them
cpufreq: Don't call __cpufreq_governor() for drivers without target()
cpufreq: exynos5440: Protect OPP search calls with RCU lock
cpufreq: dbx500: Round to closest available freq
cpufreq: Call __cpufreq_governor() with correct policy->cpus mask
cpufreq / intel_pstate: Optimize intel_pstate_set_policy
cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
arm: exynos: Enable OPP library support for exynos5440
cpufreq: exynos: Remove error return even if no soc is found
cpufreq: exynos: Add cpufreq driver for exynos5440
cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor
cpufreq: ondemand: allow custom powersave_bias_target handler to be registered
cpufreq: convert cpufreq_driver to using RCU
cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq
cpufreq: sparc: move cpufreq driver to drivers/cpufreq
...
Conflicts:
MAINTAINERS (with commit a8e39c3 from pm-cpuidle)
drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)
|
|
gcc-3.8 correctly found that the variables set by find_freq_tables()
are not initialized if this function is called on something other
than a pxa2xx or pxa3xx:
pxa2xx-cpufreq.c: In function 'pxa_verify_policy':
pxa2xx-cpufreq.c:272:6: warning: 'pxa_freqs_table' may be used uninitialized in this function [-Wmaybe-uninitialized]
pxa2xx-cpufreq.c: In function 'pxa_set_target':
pxa2xx-cpufreq.c:345:23: warning: 'pxa_freq_settings' may be used uninitialized in this function [-Wmaybe-uninitialized]
Rather than adding a bogus initialization that would let us
get a little further before crashing, add an explicit BUG().
We know that this code is designed to run on only these cpus,
so this will fix the build warning and give a more helpful
diagnostic if the code ever changes to run on other machines.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For arm S5pv210 with allmodconfig, ARM_S5PV210_CPUFREQ need
CONFIG_CPU_FREQ_TABLE=y, or will cause compiling issue.
The related operation:
+ arm-linux-gnu-ld -EL -p --no-undefined -X --build-id -X -o .tmp_vmlinux1 -T /root/linux-next/arch/arm/kernel/vmlinux.lds arch/arm/kernel/head.o init/built-in.o --start-group usr/built-in.o arch/arm/nwfpe/built-in.o arch/arm/vfp/built-in.o arch/arm/kernel/built-in.o arch/arm/mm/built-in.o arch/arm/common/built-in.o arch/arm/net/built-in.o arch/arm/crypto/built-in.o arch/arm/mach-s5pv210/built-in.o arch/arm/plat-samsung/built-in.o kernel/built-in.o mm/built-in.o fs/built-in.o ipc/built-in.o security/built-in.o crypto/built-in.o block/built-in.o arch/arm/lib/lib.a lib/lib.a arch/arm/lib/built-in.o lib/built-in.o drivers/built-in.o sound/built-in.o firmware/built-in.o net/built-in.o --end-group
The related errors:
drivers/built-in.o: In function `s5pv210_target':
drivers/cpufreq/s5pv210-cpufreq.c:225: undefined reference to `cpufreq_frequency_table_target'
drivers/cpufreq/s5pv210-cpufreq.c:237: undefined reference to `cpufreq_frequency_table_target'
drivers/built-in.o: In function `s5pv210_verify_speed':
drivers/cpufreq/s5pv210-cpufreq.c:182: undefined reference to `cpufreq_frequency_table_verify'
drivers/built-in.o: In function `s5pv210_cpu_init':
drivers/cpufreq/s5pv210-cpufreq.c:556: undefined reference to `cpufreq_frequency_table_get_attr'
drivers/cpufreq/s5pv210-cpufreq.c:560: undefined reference to `cpufreq_frequency_table_cpuinfo'
make: *** [vmlinux] Error 1
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Parent node must be put after using it to balance its usage count. This was
missing in cpufreq-cpu0 driver. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This driver isn't updated to work with latest cpufreq core updates that happened
recently. Fix them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
DT nodes should be put using of_node_put() to balance their usage counts. This
is not done properly in ARM's big LITTLE driver. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some cpufreq drivers implement their own governor and so don't need
us to call generic governors interface via __cpufreq_governor(). Few
recent commits haven't obeyed this law well and we saw some
regressions.
This patch is an attempt to fix the above issue.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As per the OPP library documentation(Documentation/power/opp.txt) all
OPP find/get calls should be protected by RCU locks.
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When reading the cpu speed, round it to the closest available
frequency from the table.
Signed-off-by: Mats Fagerstrom <mats.fagerstrom@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
__cpufreq_governor() must be called with a correct policy->cpus mask.
In __cpufreq_remove_dev() we initially clear policy->cpus with
cpumask_clear_cpu() and then call
__cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT). If the governor
is doing some per-cpu stuff in EXIT callback, this can create
uncertain behavior.
Generic governors in drivers/cpufreq/ doesn't do any per-cpu stuff
in EXIT callback and so we don't face any issues currently. But its
better to keep the code clean, so we don't face any issues in future.
Now, we call cpumask_clear_cpu() only when multiple cpus are managed
by policy.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This function is called quite often from other subsystems.
Removed unused call to intel_pstate_get_min_max().
Also when "policy->policy == CPUFREQ_POLICY_PERFORMANCE", then
no need to do calculations as the limits will be forced anyway.
Also corrected filename in the header.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As multi-platform build is being adopted by more and more ARM platforms,
initcall function should be used very carefully. For example, when
CONFIG_ARM_OMAP2PLUS_CPUFREQ is built in the kernel, omap_cpufreq_init()
will be called on all the platforms to initialize omap-cpufreq driver.
Further, on OMAP, we now use Soc generic cpufreq-cpu0 driver using device
tree entries. To allow cpufreq-cpu0 and omap-cpufreq drivers to co-exist
for OMAP in a single image, we need to ensure the following:
1. With device tree boot, we use cpufreq-cpu0
2. With non device tree boot, we use omap-cpufreq
In the case of (1), we will have cpu OPPs and regulator registered
as part of the device tree nodes, to ensure that omap-cpufreq
and cpufreq-cpu0 don't conflict in managing the frequency of the
same CPU, we should not permit omap-cpufreq to be probed.
In the case of (2), we will not have the cpufreq-cpu0 device, hence
only omap-cpufreq will be active.
To eliminate this undesired these effects, we change omap-cpufreq
driver to have it instantiated as a platform_driver and register
"omap-cpufreq" device only when booted without device tree nodes on
OMAP platforms.
This allows the following:
a) Will only run on platforms that create the platform_device
"omap-cpufreq".
b) Since the platform_device is registered only when device tree nodes
are *not* populated, omap-cpufreq driver does not conflict with
the usage of cpufreq-cpu0 driver which is used on OMAP platforms when
device tree nodes are present.
Inspired by commit 5553f9e26f6f49a93ba732fd222eac6973a4cf35
(cpufreq: instantiate cpufreq-cpu0 as a platform_driver)
[robherring2@gmail.com: reported conflict of omap-cpufreq vs other
driver in an non-device tree supported boot]
Reported-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch helps to have single binary for exynos5440 and previous
exynos soc's. This change is needed for adding exynos5440 cpufreq driver
which does not uses exynos-cpufreq common file and adds it own driver.
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
