summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)Author
2018-06-13Merge tag 'pm-4.18-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These revert a recent PM core change that introduced a regression, fix the build when the recently added Kryo cpufreq driver is selected, add support for devices attached to multiple power domains to the generic power domains (genpd) framework, add support for iowait boosting on systens with hardware-managed P-states (HWP) enabled to the intel_pstate driver, modify the behavior of the wakeup_count device attribute in sysfs, fix a few issues and clean up some ugliness, mostly in cpufreq (core and drivers) and in the cpupower utility. Specifics: - Revert a recent PM core change that attempted to fix an issue related to device links, but introduced a regression (Rafael Wysocki) - Fix build when the recently added cpufreq driver for Kryo processors is selected by making it possible to build that driver as a module (Arnd Bergmann) - Fix the long idle detection mechanism in the out-of-band (ondemand and conservative) cpufreq governors (Chen Yu) - Add support for devices in multiple power domains to the generic power domains (genpd) framework (Ulf Hansson) - Add support for iowait boosting on systems with hardware-managed P-states (HWP) enabled to the intel_pstate driver and make it use that feature on systems with Skylake Xeon processors as it is reported to improve performance significantly on those systems (Srinivas Pandruvada) - Fix and update the acpi_cpufreq, ti-cpufreq and imx6q cpufreq drivers (Colin Ian King, Suman Anna, Sébastien Szymanski) - Change the behavior of the wakeup_count device attribute in sysfs to expose the number of events when the device might have aborted system suspend in progress (Ravi Chandra Sadineni) - Fix two minor issues in the cpupower utility (Abhishek Goel, Colin Ian King)" * tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / runtime: Fixup reference counting of device link suppliers at probe" cpufreq: imx6q: check speed grades for i.MX6ULL cpufreq: governors: Fix long idle detection logic in load calculation cpufreq: intel_pstate: enable boost for Skylake Xeon PM / wakeup: Export wakeup_count instead of event_count via sysfs PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains PM / Domains: Add support for multi PM domains per device to genpd PM / Domains: Split genpd_dev_pm_attach() PM / Domains: Don't attach devices in genpd with multi PM domains PM / Domains: dt: Allow power-domain property to be a list of specifiers cpufreq: intel_pstate: New sysfs entry to control HWP boost cpufreq: intel_pstate: HWP boost performance on IO wakeup cpufreq: intel_pstate: Add HWP boost utility and sched util hooks cpufreq: ti-cpufreq: Use devres managed API in probe() cpufreq: ti-cpufreq: Fix an incorrect error return value cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static cpufreq: kryo: allow building as a loadable module cpupower : Fix header name to read idle state name cpupower: fix spelling mistake: "logilename" -> "logfilename"
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits) ARM: tegra: fix compile-testing PCI host driver soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers ...
2018-06-11cpufreq: imx6q: check speed grades for i.MX6ULLSébastien Szymanski
Check the max speed supported from the fuses for i.MX6ULL and update the operating points table accordingly. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-08cpufreq: governors: Fix long idle detection logic in load calculationChen Yu
According to current code implementation, detecting the long idle period is done by checking if the interval between two adjacent utilization update handlers is long enough. Although this mechanism can detect if the idle period is long enough (no utilization hooks invoked during idle period), it might not cover a corner case: if the task has occupied the CPU for too long which causes no context switches during that period, then no utilization handler will be launched until this high prio task is scheduled out. As a result, the idle_periods field might be calculated incorrectly because it regards the 100% load as 0% and makes the conservative governor who uses this field confusing. Change the detection to compare the idle_time with sampling_rate directly. Reported-by: Artem S. Tashkinov <t.artem@mailcity.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-08cpufreq: intel_pstate: enable boost for Skylake XeonSrinivas Pandruvada
Enable HWP boost on Skylake server and workstations. Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: intel_pstate: New sysfs entry to control HWP boostSrinivas Pandruvada
A new attribute is added to intel_pstate sysfs to enable/disable HWP dynamic performance boost. Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: intel_pstate: HWP boost performance on IO wakeupSrinivas Pandruvada
This change uses SCHED_CPUFREQ_IOWAIT flag to boost HWP performance. Since SCHED_CPUFREQ_IOWAIT flag is set frequently, we don't start boosting steps unless we see two consecutive flags in two ticks. This avoids boosting due to IO because of regular system activities. To avoid synchronization issues, the actual processing of the flag is done on the local CPU callback. Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: intel_pstate: Add HWP boost utility and sched util hooksSrinivas Pandruvada
Added two utility functions to HWP boost up gradually and boost down to the default cached HWP request values. Boost up: Boost up updates HWP request minimum value in steps. This minimum value can reach upto at HWP request maximum values depends on how frequently, this boost up function is called. At max, boost up will take three steps to reach the maximum, depending on the current HWP request levels and HWP capabilities. For example, if the current settings are: If P0 (Turbo max) = P1 (Guaranteed max) = min No boost at all. If P0 (Turbo max) > P1 (Guaranteed max) = min Should result in one level boost only for P0. If P0 (Turbo max) = P1 (Guaranteed max) > min Should result in two level boost: (min + p1)/2 and P1. If P0 (Turbo max) > P1 (Guaranteed max) > min Should result in three level boost: (min + p1)/2, P1 and P0. We don't set any level between P0 and P1 as there is no guarantee that they will be honored. Boost down: After the system is idle for hold time of 3ms, the HWP request is reset to the default value from HWP init or user modified one via sysfs. Caching of HWP Request and Capabilities Store the HWP request value last set using MSR_HWP_REQUEST and read MSR_HWP_CAPABILITIES. This avoid reading of MSRs in the boost utility functions. These boost utility functions calculated limits are based on the latest HWP request value, which can be modified by setpolicy() callback. So if user space modifies the minimum perf value, that will be accounted for every time the boost up is called. There will be case when there can be contention with the user modified minimum perf, in that case user value will gain precedence. For example just before HWP_REQUEST MSR is updated from setpolicy() callback, the boost up function is called via scheduler tick callback. Here the cached MSR value is already the latest and limits are updated based on the latest user limits, but on return the MSR write callback called from setpolicy() callback will update the HWP_REQUEST value. This will be used till next time the boost up function is called. In addition add a variable to control HWP dynamic boosting. When HWP dynamic boost is active then set the HWP specific update util hook. The contents in the utility hooks will be filled in the subsequent patches. Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: ti-cpufreq: Use devres managed API in probe()Suman Anna
The ti_cpufreq_probe() function uses regular kzalloc to allocate the ti_cpufreq_data structure and kfree for freeing this memory on failures. Simplify this code by using the devres managed API. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: ti-cpufreq: Fix an incorrect error return valueSuman Anna
Commit 05829d9431df (cpufreq: ti-cpufreq: kfree opp_data when failure) has fixed a memory leak in the failure path, however the patch returned a positive value on get_cpu_device() failure instead of the previous negative value. Fix this incorrect error return value properly. Fixes: 05829d9431df (cpufreq: ti-cpufreq: kfree opp_data when failure) Cc: 4.14+ <stable@vger.kernel.org> # v4.14+ Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: ACPI: make function acpi_cpufreq_fast_switch() staticColin Ian King
The acpi_cpufreq_fast_switch() function is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/cpufreq/acpi-cpufreq.c:468:14: warning: symbol 'acpi_cpufreq_fast_switch' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-06cpufreq: kryo: allow building as a loadable moduleArnd Bergmann
Building the kryo cpufreq driver while QCOM_SMEM is a loadable module results in a link error: drivers/cpufreq/qcom-cpufreq-kryo.o: In function `qcom_cpufreq_kryo_probe': qcom-cpufreq-kryo.c:(.text+0xbc): undefined reference to `qcom_smem_get' The problem is that Kconfig ignores interprets the dependency as met when the dependent symbol is a 'bool' one. By making it 'tristate', it will be forced to be a module here, which builds successfully. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-05Merge tag 'acpi-4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to the 20180508 upstream revision and make it support the RT patch, add CPPC v3 support to the ACPI CPPC library, add a WDAT-based watchdog quirk to prevent clashes with the RTC, add quirks to the ACPI AC and battery drivers, and update the ACPI SoC drivers. Specifics: - Update the ACPICA code in the kernel to the 20180508 upstream revision including: * iASL -tc option enhancement (Bob Moore). * Debugger improvements (Bob Moore). * Support for tables larger than 1 MB in acpidump/acpixtract (Bob Moore). * Minor fixes and cleanups (Colin Ian King, Toomas Soome). - Make the ACPICA code in the kernel support the RT patch (Sebastian Andrzej Siewior, Steven Rostedt). - Add a kmemleak annotation to the ACPICA code (Larry Finger). - Add CPPC v3 support to the ACPI CPPC library and fix two issues related to CPPC (Prashanth Prakash, Al Stone). - Add an ACPI WDAT-based watchdog quirk to prefer iTCO_wdt on systems where WDAT clashes with the RTC SRAM (Mika Westerberg). - Add some quirks to the ACPI AC and battery drivers (Carlo Caione, Hans de Goede). - Update the ACPI SoC drivers for Intel (LPSS) and AMD (APD) platforms (Akshu Agrawal, Hans de Goede). - Fix up some assorted minor issues (Al Stone, Laszlo Toth, Mathieu Malaterre)" * tag 'acpi-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Mark acpi_ut_create_internal_object_dbg() memory allocations as non-leaks ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM mailbox: PCC: erroneous error message when parsing ACPI PCCT ACPICA: Update version to 20180508 ACPICA: acpidump/acpixtract: Support for tables larger than 1MB ACPI: APD: Add AMD misc clock handler support clk: x86: Add ST oscout platform clock ACPICA: Update version to 20180427 ACPICA: Debugger: Removed direct support for EC address space in "Test Objects" ACPICA: Debugger: Add Package support for "test objects" command ACPICA: Improve error messages for the namespace root node ACPICA: Fix potential infinite loop in acpi_rs_dump_byte_list ACPICA: vsnprintf: this statement may fall through ACPICA: Tables: Fix spelling mistake in comment ACPICA: iASL: Enhance the -tc option (create AML hex file in C) ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ACPI / tables: improve comments regarding acpi_parse_entries_array() ACPICA: Convert acpi_gbl_hardware lock back to an acpi_raw_spinlock ACPICA: provide abstraction for raw_spinlock_t ACPI / CPPC: Fix invalid PCC channel status errors ...
2018-06-04Merge branches 'acpi-cppc', 'acpi-misc', 'acpi-battery' and 'acpi-ac'Rafael J. Wysocki
* acpi-cppc: mailbox: PCC: erroneous error message when parsing ACPI PCCT ACPI / CPPC: Fix invalid PCC channel status errors ACPI / CPPC: Document CPPC sysfs interface cpufreq / CPPC: Support for CPPC v3 ACPI / CPPC: Check for valid PCC subspace only if PCC is used ACPI / CPPC: Add support for CPPC v3 * acpi-misc: ACPI: Add missing prototype_for arch_post_acpi_subsys_init() ACPI: add missing newline to printk * acpi-battery: ACPI / battery: Add quirk to avoid checking for PMIC with native driver ACPI / battery: Ignore AC state in handle_discharging on systems where it is broken ACPI / battery: Add handling for devices which wrongly report discharging state ACPI / battery: Remove initializer for unused ident dmi_system_id ACPI / AC: Remove initializer for unused ident dmi_system_id * acpi-ac: ACPI / AC: Add quirk to avoid checking for PMIC with native driver
2018-06-04Merge branches 'pm-cpufreq-sched' and 'pm-cpuidle'Rafael J. Wysocki
* pm-cpufreq-sched: cpufreq: schedutil: Avoid missing updates for one-CPU policies schedutil: Allow cpufreq requests to be made even when kthread kicked cpufreq: Rename cpufreq_can_do_remote_dvfs() cpufreq: schedutil: Cleanup and document iowait boost cpufreq: schedutil: Fix iowait boost reset cpufreq: schedutil: Don't set next_freq to UINT_MAX Revert "cpufreq: schedutil: Don't restrict kthread to related_cpus unnecessarily" * pm-cpuidle: cpuidle: governors: Consolidate PM QoS handling cpuidle: governors: Drop redundant checks related to PM QoS
2018-05-30cpufreq: Add Kryo CPU scaling driverIlia Lin
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, the CPU frequency subset and voltage value of each OPP varies based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables defines the voltage and frequency value based on the msm-id in SMEM and speedbin blown in the efuse combination. The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC to provide the OPP framework with required information. This is used to determine the voltage and frequency value for each OPP of operating-points-v2 table when it is parsed by the OPP framework. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-30cpufreq: Use static SRCU initializerSebastian Andrzej Siewior
Use the static SRCU initializer for `cpufreq_transition_notifier_list'. This avoids the init_cpufreq_transition_notifier_list() initcall. Its only purpose is to initialize the SRCU notifier once during boot and set another variable which is used as an indicator whether the init was perfromed before cpufreq_register_notifier() was used. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-30cpufreq: Fix new policy initialization during limits updates via sysfsTao Wang
If the policy limits are updated via cpufreq_update_policy() and subsequently via sysfs, the limits stored in user_policy may be set incorrectly. For example, if both min and max are set via sysfs to the maximum available frequency, user_policy.min and user_policy.max will also be the maximum. If a policy notifier triggered by cpufreq_update_policy() lowers both the min and the max at this point, that change is not reflected by the user_policy limits, so if the max is updated again via sysfs to the same lower value, then user_policy.max will be lower than user_policy.min which shouldn't happen. In particular, if one of the policy CPUs is then taken offline and back online, cpufreq_set_policy() will fail for it due to a failing limits check. To prevent that from happening, initialize the min and max fields of the new_policy object to the ones stored in user_policy that were previously set via sysfs. Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-23cpufreq: Rename cpufreq_can_do_remote_dvfs()Viresh Kumar
This routine checks if the CPU running this code belongs to the policy of the target CPU or if not, can it do remote DVFS for it remotely. But the current name of it implies as if it is only about doing remote updates. Rename it to make it more relevant. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Wrap cpufreq into platform driverDmitry Osipenko
Currently tegra20-cpufreq kernel module isn't getting autoloaded because there is no device associated with the module, this is one of two patches that resolves the module autoloading. This patch adds a module alias that will associate the tegra20-cpufreq kernel module with the platform device, other patch will instantiate the actual platform device. And now it makes sense to wrap cpufreq driver into a platform driver for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Allow cpufreq driver to be built as loadable moduleDmitry Osipenko
Nothing prevents Tegra20 CPUFreq module to be unloaded, hence allow it to be built as a non-builtin kernel module. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Check if this is Tegra20 machineDmitry Osipenko
Don't even try to request the clocks during of module initialization on non-Tegra20 machines (this is the case for a multi-platform kernel) for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Remove unneeded variable initializationDmitry Osipenko
Remove unneeded variable initialization solely for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Remove unnecessary parenthesesDmitry Osipenko
Remove unnecessary parentheses as suggested by the checkpatch script. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Remove unneeded check in tegra_cpu_initDmitry Osipenko
Remove checking of the CPU number for consistency as it won't ever fail unless there is a severe bug in the cpufreq core. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Release clocks properlyDmitry Osipenko
Properly put requested clocks in the module init/exit code. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Remove EMC clock usageDmitry Osipenko
The EMC driver has been gone 4 years ago, since the commit a7cbe92cef27 ("ARM: tegra: remove tegra EMC scaling driver"). Remove the EMC clock usage as it does nothing. We may consider re-implementing the EMC scaling later, probably using PM Memory Bandwidth QoS API. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Clean up included headersDmitry Osipenko
Remove unused/unneeded headers and sort them in the alphabet order. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Clean up whitespaces in the codeDmitry Osipenko
Remove unneeded blank line and replace whitespaces with a tab in the code for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-21cpufreq: tegra20: Change module descriptionDmitry Osipenko
Change module description to be in line with the other Tegra drivers, just for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-18Merge back cpufreq material for v4.18.Rafael J. Wysocki
2018-05-15Merge tag 'scmi-updates-4.18' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers SCMI cleanups for v4.18 This contains all of the trivial review comments that were not addressed as the series was already queued up for v4.17 and were not critical to go as fixes. They generally just improve code readability, fix kernel-docs, remove unused/unnecessary code, follow standard function naming and simplifies certain exit paths. * tag 'scmi-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: simplify exit path by returning on error firmware: arm_scmi: improve exit paths and code readability firmware: arm_scmi: remove unnecessary bitmap_zero firmware: arm_scmi: drop unused `con_priv` structure member firmware: arm_scmi: rename scmi_xfer_{init,get,put} firmware: arm_scmi: rename get_transition_latency and add_opps_to_device firmware: arm_scmi: fix kernel-docs documentation firmware: arm_scmi: improve code readability using bitfield accessor macros Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-15Revert "cpufreq: rcar: Add support for R8A7795 SoC"Simon Horman
This reverts commit 034def597bb73cbf29ffade7d8aec8408af8c743. This is no longer needed since the following commit and to the best of my knowledge is not relied on by any upstream DTS: edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15Revert "cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver"Simon Horman
This reverts commit bea2ebca6b917e46d0c585f416f1326fdf41e69b. This is no longer needed since the following commit and to the best of my knowledge is not relied on by any upstream DTS: edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-14cpufreq: intel_pstate: allow trace in passive modeDoug Smythies
Allow use of the trace_pstate_sample trace function when the intel_pstate driver is in passive mode. Since the core_busy and scaled_busy fields are not used, and it might be desirable to know which path through the driver was used, either intel_cpufreq_target or intel_cpufreq_fast_switch, re-task the core_busy field as a flag indicator. The user can then use the intel_pstate_tracer.py utility to summarize and plot the trace. Note: The core_busy feild still goes by that name in include/trace/events/power.h and within the intel_pstate_tracer.py script and csv file headers, but it is graphed as "performance", and called core_avg_perf now in the intel_pstate driver. Sometimes, in passive mode, the driver is not called for many tens or even hundreds of seconds. The user needs to understand, and not be confused by, this limitation. Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-14cpufreq: armada-37xx: driver relies on cpufreq-dtMiquel Raynal
Armada-37xx driver registers a cpufreq-dt driver. Not having CONFIG_CPUFREQ_DT selected leads to a silent abort during the probe. Prevent that situation by having the former depending on the latter. Fixes: 92ce45fb875d7 (cpufreq: Add DVFS support for Armada 37xx) Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-13cpufreq: optimize cpufreq_notify_transition()Viresh Kumar
cpufreq_notify_transition() calls __cpufreq_notify_transition() for each CPU of a policy. There is a lot of code in __cpufreq_notify_transition() though which isn't required to be executed for each CPU, like checking about disabled cpufreq or irqs, adjusting jiffies, updating cpufreq stats and some debug print messages. This commit merges __cpufreq_notify_transition() into cpufreq_notify_transition() and modifies cpufreq_notify_transition() to execute minimum amount of code for each CPU. Also fix the kerneldoc for cpufreq_notify_transition() while at it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-10cpufreq: s3c2440: fix spelling mistake: "divsiors" -> "divisors"Colin Ian King
Trivial fix to spelling mistake in s3c_freq_dbg debug message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-10firmware: arm_scmi: rename get_transition_latency and add_opps_to_deviceSudeep Holla
Most of the scmi code follows the suggestion from Greg KH on a totally different thread[0] to have the subsystem name first, followed by the noun and finally the verb with couple of these exceptions. This patch fixes them so that all the functions names are aligned to that practice. [0] https://www.spinics.net/lists/arm-kernel/msg583673.html Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-05-10cpufreq: speedstep: fix speedstep_detect_processor()'s return typeLuc Van Oostenryck
speedstep_detect_processor() is declared as returing an 'enum speedstep_processor' but use an 'int' in its definition. Fix this by using 'enum speedstep_processor' in its definition too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-10cpufreq: add suspend/resume support in Armada 37xx DVFS driverMiquel Raynal
Add suspend/resume hooks in Armada 37xx DVFS driver to handle S2RAM operations. As there is currently no 'driver' structure, create one to store both the regmap and the register values during suspend operation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-10cpufreq: armada: Free resources on error pathsViresh Kumar
The resources weren't freed on failures, free them properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-10cpufreq: dt: Allow platform specific suspend/resume callbacksViresh Kumar
Platforms may need to implement platform specific suspend/resume hooks. Update cpufreq-dt driver's platform data to contain those for such platforms. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-30cpufreq / CPPC: Set platform specific transition_delay_usPrashanth Prakash
Add support to specify platform specific transition_delay_us instead of using the transition delay derived from PCC. With commit 3d41386d556d (cpufreq: CPPC: Use transition_delay_us depending transition_latency) we are setting transition_delay_us directly and not applying the LATENCY_MULTIPLIER. Because of that, on Qualcomm Centriq we can end up with a very high rate of frequency change requests when using the schedutil governor (default rate_limit_us=10 compared to an earlier value of 10000). The PCC subspace describes the rate at which the platform can accept commands on the CPPC's PCC channel. This includes read and write command on the PCC channel that can be used for reasons other than frequency transitions. Moreover the same PCC subspace can be used by multiple freq domains and deriving transition_delay_us from it as we do now can be sub-optimal. Moreover if a platform does not use PCC for desired_perf register then there is no way to compute the transition latency or the delay_us. CPPC does not have a standard defined mechanism to get the transition rate or the latency at the moment. Given the above limitations, it is simpler to have a platform specific transition_delay_us and rely on PCC derived value only if a platform specific value is not available. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Fixes: 3d41386d556d (cpufreq: CPPC: Use transition_delay_us depending transition_latency) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-28Merge tag 'powerpc-4.17-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A bunch of fixes, mostly for existing code and going to stable. Our memory hot-unplug path wasn't flushing the cache before removing memory. That is a problem now that we are doing memory hotplug on bare metal. Three fixes for the NPU code that supports devices connected via NVLink (ie. GPUs). The main one tweaks the TLB flush algorithm to avoid soft lockups for large flushes. A fix for our memory error handling where we would loop infinitely, returning back to the bad access and hard lockup the CPU. Fixes for the OPAL RTC driver, which wasn't handling some error cases correctly. A fix for a hardlockup in the powernv cpufreq driver. And finally two fixes to our smp_send_stop(), required due to a recent change to use it on shutdown. Thanks to: Alistair Popple, Balbir Singh, Laurentiu Tudor, Mahesh Salgaonkar, Mark Hairgrove, Nicholas Piggin, Rashmica Gupta, Shilpasri G Bhat" * tag 'powerpc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kvm/booke: Fix altivec related build break powerpc: Fix deadlock with multiple calls to smp_send_stop cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt powerpc: Fix smp_send_stop NMI IPI handling rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops powerpc/mce: Fix a bug where mce loops on memory UE. powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large address range powerpc/powernv/npu: Prevent overwriting of pnv_npu2_init_contex() callback parameters powerpc/powernv/npu: Add lock to prevent race in concurrent context init/destroy powerpc/powernv/memtrace: Let the arch hotunplug code flush cache powerpc/mm: Flush cache on memory hot(un)plug
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 14:04:25 +0000