summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)Author
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-10Merge tag 'pm-5.8-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-10Merge branches 'pm-cpufreq' and 'pm-acpi'Rafael J. Wysocki
* pm-cpufreq: cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag * pm-acpi: ACPI: PM: Avoid using power resources if there are none for D0
2020-06-10Merge branch 'pm-opp'Rafael J. Wysocki
* pm-opp: opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-05cpufreq: CPPC: add SW BOOST supportXiongfeng Wang
To add SW BOOST support for CPPC, we need to get the max frequency of boost mode and non-boost mode. ACPI spec 6.2 section 8.4.7.1 describes the following two CPC registers. "Highest performance is the absolute maximum performance an individual processor may reach, assuming ideal conditions. This performance level may not be sustainable for long durations, and may only be achievable if other platform components are in a specific state; for example, it may require other processors be in an idle state. Nominal Performance is the maximum sustained performance level of the processor, assuming ideal operating conditions. In absence of an external constraint (power, thermal, etc.) this is the performance level the platform is expected to be able to maintain continuously. All processors are expected to be able to sustain their nominal performance state simultaneously." To add SW BOOST support for CPPC, we can use Highest Performance as the max performance in boost mode and Nominal Performance as the max performance in non-boost mode. If the Highest Performance is greater than the Nominal Performance, we assume SW BOOST is supported. The current CPPC driver does not support SW BOOST and use 'Highest Performance' as the max performance the CPU can achieve. 'Nominal Performance' is used to convert 'performance' to 'frequency'. That means, if firmware enable boost and provide a value for Highest Performance which is greater than Nominal Performance, boost feature is enabled by default. Because SW BOOST is disabled by default, so, after this patch, boost feature is disabled by default even if boost is enabled by firmware. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-05cpufreq: change '.set_boost' to act on one policyXiongfeng Wang
Macro 'for_each_active_policy()' is defined internally. To avoid some cpufreq driver needing this macro to iterate over all the policies in '.set_boost' callback, we redefine '.set_boost' to act on only one policy and pass the policy as an argument. 'cpufreq_boost_trigger_state()' iterates over all the policies to set boost for the system. This is preparation for adding SW BOOST support for CPPC. To protect Boost enable/disable by sysfs from CPU online/offline, add 'cpu_hotplug_lock' before calling '.set_boost' for each CPU. Also move the lock from 'set_boost()' to 'store_cpb()' in acpi_cpufreq. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-04Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-06-03Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS updates from Thomas Bogendoerfer: - added support for MIPSr5 and P5600 cores - converted Loongson PCI driver into a PCI host driver using the generic PCI framework - added emulation of CPUCFG command for Loogonson64 cpus - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA - ioremap cleanup - fix for a race between two threads faulting the same page - various cleanups and fixes * tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits) MIPS: ralink: drop ralink_clk_init for mt7621 MIPS: ralink: bootrom: mark a function as __init to save some memory MIPS: Loongson64: Reorder CPUCFG model match arms MIPS: Expose Loongson CPUCFG availability via HWCAP MIPS: Loongson64: Guard against future cores without CPUCFG MIPS: Fix build warning about "PTR_STR" redefinition MIPS: Loongson64: Remove not used pci.c MIPS: Loongson64: Define PCI_IOBASE MIPS: CPU_LOONGSON2EF need software to maintain cache consistency MIPS: DTS: Fix build errors used with various configs MIPS: Loongson64: select NO_EXCEPT_FILL MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe() MIPS: mm: add page valid judgement in function pte_modify mm/memory.c: Add memory read privilege on page fault handling mm/memory.c: Update local TLB if PTE entry exists MIPS: Do not flush tlb page when updating PTE entry MIPS: ingenic: Default to a generic board MIPS: ingenic: Add support for GCW Zero prototype MIPS: ingenic: DTS: Add memory info of GCW Zero MIPS: Loongson64: Switch to generic PCI driver ...
2020-06-01Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for v5.8-rc1 (part 2) from Viresh Kumar: "This contains a single patch to enable CPUFREQ_NEED_INITIAL_FREQ_CHECK flag for tegra driver." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
2020-06-01Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework changes for v5.8 from Viresh Kumar: "This contains: - support for interconnect bandwidth in the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - support for regulator enable/disable (Kamil Konieczny). This is based on three patches from the interconnect tree which shall get merged via Greg's tree." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-05-29cpufreq: dt: Add support for interconnect bandwidth scalingGeorgi Djakov
In addition to clocks and regulators, some devices can scale the bandwidth of their on-chip interconnect - for example between CPU and DDR memory. Add support for that, so that platforms which support it can make use of it. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> [ Viresh: Reused dev_pm_opp_of_find_icc_paths(). Also drop the depends on from Kconfig. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> fixup! cpufreq: dt: Add support for interconnect bandwidth scaling
2020-05-25Merge tag 'tegra-for-5.8-cpufreq' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers cpufreq: Changes for v5.8-rc1 This change move Tegra20 and Tegra30 to the generic DT CPU frequency scaling driver. * tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now) Link: https://lore.kernel.org/r/20200515145311.1580134-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-18cpufreq: Fix up cpufreq_boost_set_sw()Rafael J. Wysocki
After commit 18c49926c4bf ("cpufreq: Add QoS requests for userspace constraints") the return value of freq_qos_update_request(), that can be 1, passed by cpufreq_boost_set_sw() to its caller sometimes confuses the latter, which only expects to see 0 or negative error codes, so notice that cpufreq_boost_set_sw() can return an error code (which should not be -EINVAL for that matter) as soon as the first policy without a frequency table is found (because either all policies have a frequency table or none of them have it) and rework it to meet its caller's expectations. Fixes: 18c49926c4bf ("cpufreq: Add QoS requests for userspace constraints") Reported-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-18cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flagMian Yousaf Kaukab
The driver doesn't provide ->get() method to read current frequency and the frequency is set to 0 at initialization which makes the driver fail at initialization time. Set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag for the driver, so the cpufreq core checks for the unlisted frequency and sets the CPU to a valid frequency from the frequency table. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> [ Viresh: Massaged change log ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-05-12Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for v5.8 from Viresh Kumar: "- Build OMAP cpufreq driver by default for ARCH_OMAP2PLUS platform (Anders Roxell). - Fix compatible bindings for qcom cpufreq driver (Ansuel Smith). - Update qoriq cpufreq driver to automatically loaded when built as module and related changes (Mian Yousaf Kaukab and Geert Uytterhoeven). - Add support for r8a7742 to cpufreq-dt platform driver (Lad Prabhakar). - Add support for i.MX7ULP to imx cpufreq driver (Peng Fan)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qoriq: Add platform dependencies clk: qoriq: add cpufreq platform device cpufreq: qoriq: convert to a platform driver cpufreq: qcom: fix wrong compatible binding cpufreq: imx-cpufreq-dt: support i.MX7ULP cpufreq: dt: Add support for r8a7742 cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist cpufreq: omap: Build driver by default for ARCH_OMAP2PLUS
2020-05-08cpufreq: qoriq: Add platform dependenciesGeert Uytterhoeven
The Freescale QorIQ clock controller is only present on Freescale E500MC and Layerscape SoCs. Add platform dependencies to the QORIQ_CPUFREQ config symbol, to avoid asking the user about it when configuring a kernel without E500MC or Layerscape support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-05-07cpufreq: qoriq: convert to a platform driverMian Yousaf Kaukab
The driver has to be manually loaded if it is built as a module. It is neither exporting MODULE_DEVICE_TABLE nor MODULE_ALIAS. Moreover, no platform-device is created (and thus no uevent is sent) for the clockgen nodes it depends on. Convert the module to a platform driver with its own alias. Moreover, drop whitelisted SOCs. Platform device will be created only for the compatible platforms. Reviewed-by: Yuantian Tang <andy.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-05-06cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)Dmitry Osipenko
Re-parenting to intermediate clock is supported now by the clock driver and thus there is no need in a customized CPUFreq driver, all that code is common for both Tegra20 and Tegra30. The available CPU freqs are now specified in device-tree in a form of OPPs, all users should update their device-trees. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-04cpufreq: qcom: fix wrong compatible bindingAnsuel Smith
Binding in Documentation is still "operating-points-v2-kryo-cpu". Restore the old binding to fix the compatibility problem. Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-05-02Merge back cpufreq material for v5.8.Rafael J. Wysocki
2020-04-28cpufreq: imx-cpufreq-dt: support i.MX7ULPPeng Fan
i.MX7ULP's ARM core clock design is totally different compared with i.MX7D/8M SoCs which supported by imx-cpufreq-dt. It needs get_intermediate and target_intermedate to configure clk MUX ready, before let OPP configure ARM core clk. |---FIRC |------RUN---...---SCS(MUX2) --------| ARM --(MUX1) |---SPLL_PFD0(CLK_SET_RATE_GATE) |------HSRUN--...--HSRUN_SCS(MUX3)---| |---SRIC FIRC is step clk, SPLL_PFD0 is the normal clk driving ARM core. MUX2 and MUX3 share same inputs. So if MUX2/MUX3 both sources from SPLL_PFD0, both MUXes will lose input when configure SPLL_PFD0. So the target_intermediate will configure MUX2/MUX3 to FIRC, to avoid ARM core lose clk when configure SPLL_PFD0. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28cpufreq: dt: Add support for r8a7742Lad Prabhakar
Add the compatible strings for supporting the generic cpufreq driver on the Renesas RZ/G1H (R8A7742) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklistPeng Fan
Add i.MX7ULP to cpufreq-dt-platdev blacklist. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28cpufreq: omap: Build driver by default for ARCH_OMAP2PLUSAnders Roxell
When building the mult_v7_defconfig, ARM_TI_CPUFREQ doesn't get enabled evenwhen ARCH_OMAP(3|4) is selected. Build ARM_TI_CPUFREQ by default for ARCH_OMAP2PLUS. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-27cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode onceChris Wilson
Make a note of the first time we discover the turbo mode has been disabled by the BIOS, as otherwise we complain every time we try to update the mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-17cpufreq: intel_pstate: Use passive mode by default without HWPRafael J. Wysocki
After recent changes allowing scale-invariant utilization to be used on x86, the schedutil governor on top of intel_pstate in the passive mode should be on par with (or better than) the active mode "powersave" algorithm of intel_pstate on systems in which hardware-managed P-states (HWP) are not used, so it should not be necessary to use the internal scaling algorithm in those cases. Accordingly, modify intel_pstate to start in the passive mode by default if the processor at hand does not support HWP of if the driver is requested to avoid using HWP through the kernel command line. Among other things, that will allow utilization clamps and the support for RT/DL tasks in the schedutil governor to be utilized on systems in which intel_pstate is used. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-16mips: loongsoon2ef: remove private clk apiArnd Bergmann
As platforms are moving to COMMON_CLK in general, loongson2ef stuck out as something that has a private implementation but does not actually use it except for setting the frequency of the CPU itself from the loongson2_cpufreq driver. Change that driver to call the register setting function directly and remove the rest of the stub implementation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-06Merge tag 'pm-5.7-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "Additional power management updates. These fix a corner-case suspend-to-idle wakeup issue on systems where the ACPI SCI is shared with another wakeup source, add a kernel command line option to set pm_debug_messages via the kernel command line, add a document desctibing system-wide suspend and resume code flows, modify cpufreq Kconfig to choose schedutil as the preferred governor by default in a couple of cases and do some assorted cleanups. Specifics: - Fix corner-case suspend-to-idle wakeup issue on systems where the ACPI SCI is shared with another wakeup source (Hans de Goede). - Add document describing system-wide suspend and resume code flows to the admin guide (Rafael Wysocki). - Add kernel command line option to set pm_debug_messages (Chen Yu). - Choose schedutil as the preferred scaling governor by default on ARM big.LITTLE systems and on x86 systems using the intel_pstate driver in the passive mode (Linus Walleij, Rafael Wysocki). - Drop racy and redundant checks from the PM core's device_prepare() routine (Rafael Wysocki). - Make resume from hibernation take the hibernation_restore() return value into account (Dexuan Cui)" * tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler() ACPI: PM: Add acpi_[un]register_wakeup_handler() Documentation: PM: sleep: Document system-wide suspend code flows cpufreq: Select schedutil when using big.LITTLE PM: sleep: Add pm_debug_messages kernel command line option PM: sleep: core: Drop racy and redundant checks from device_prepare() PM: hibernate: Propagate the return value of hibernation_restore() cpufreq: intel_pstate: Select schedutil as the default governor
2020-04-06Merge branches 'pm-sleep' and 'pm-cpufreq'Rafael J. Wysocki
* pm-sleep: Documentation: PM: sleep: Document system-wide suspend code flows PM: sleep: Add pm_debug_messages kernel command line option PM: sleep: core: Drop racy and redundant checks from device_prepare() PM: hibernate: Propagate the return value of hibernation_restore() * pm-cpufreq: cpufreq: Select schedutil when using big.LITTLE cpufreq: intel_pstate: Select schedutil as the default governor
2020-04-05Merge tag 'powerpc-5.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ...
2020-04-03cpufreq: Select schedutil when using big.LITTLELinus Walleij
When we are using a system with big.LITTLE HMP configuration, we need to use EAS to schedule the system. As can be seen from kernel/sched/topology.c: "EAS can be used on a root domain if it meets all the following conditions: 1. an Energy Model (EM) is available; 2. the SD_ASYM_CPUCAPACITY flag is set in the sched_domain hierarchy. 3. no SMT is detected. 4. the EM complexity is low enough to keep scheduling overheads low; 5. schedutil is driving the frequency of all CPUs of the rd;" This means that at the very least, schedutil needs to be available as a scheduling policy for EAS to work on these systems. Make this explicit by defaulting to the schedutil governor if BIG_LITTLE is selected. Currently users of the TC2 board (like me) has to figure these dependencies out themselves and it is not helpful. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-31Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...
2020-03-30Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - Various NUMA scheduling updates: harmonize the load-balancer and NUMA placement logic to not work against each other. The intended result is better locality, better utilization and fewer migrations. - Introduce Thermal Pressure tracking and optimizations, to improve task placement on thermally overloaded systems. - Implement frequency invariant scheduler accounting on (some) x86 CPUs. This is done by observing and sampling the 'recent' CPU frequency average at ~tick boundaries. The CPU provides this data via the APERF/MPERF MSRs. This hopefully makes our capacity estimates more precise and keeps tasks on the same CPU better even if it might seem overloaded at a lower momentary frequency. (As usual, turbo mode is a complication that we resolve by observing the maximum frequency and renormalizing to it.) - Add asymmetric CPU capacity wakeup scan to improve capacity utilization on asymmetric topologies. (big.LITTLE systems) - PSI fixes and optimizations. - RT scheduling capacity awareness fixes & improvements. - Optimize the CONFIG_RT_GROUP_SCHED constraints code. - Misc fixes, cleanups and optimizations - see the changelog for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) threads: Update PID limit comment according to futex UAPI change sched/fair: Fix condition of avg_load calculation sched/rt: cpupri_find: Trigger a full search as fallback kthread: Do not preempt current task if it is going to call schedule() sched/fair: Improve spreading of utilization sched: Avoid scale real weight down to zero psi: Move PF_MEMSTALL out of task->flags MAINTAINERS: Add maintenance information for psi psi: Optimize switching tasks inside shared cgroups psi: Fix cpu.pressure for cpu.max and competing cgroups sched/core: Distribute tasks within affinity masks sched/fair: Fix enqueue_task_fair warning thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code sched/rt: Remove unnecessary push for unfit tasks sched/rt: Allow pulling unfitting task sched/rt: Optimize cpupri_find() on non-heterogenous systems sched/rt: Re-instate old behavior in select_task_rq_rt() sched/rt: cpupri_find: Implement fallback mechanism for !fit case sched/fair: Fix reordering of enqueue/dequeue_task_fair() sched/fair: Fix runnable_avg for throttled cfs ...
2020-03-30Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel side changes: - A couple of x86/cpu cleanups and changes were grandfathered in due to patch dependencies. These clean up the set of CPU model/family matching macros with a consistent namespace and C99 initializer style. - A bunch of updates to various low level PMU drivers: * AMD Family 19h L3 uncore PMU * Intel Tiger Lake uncore support * misc fixes to LBR TOS sampling - optprobe fixes - perf/cgroup: optimize cgroup event sched-in processing - misc cleanups and fixes Tooling side changes are to: - perf {annotate,expr,record,report,stat,test} - perl scripting - libapi, libperf and libtraceevent - vendor events on Intel and S390, ARM cs-etm - Intel PT updates - Documentation changes and updates to core facilities - misc cleanups, fixes and other enhancements" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits) cpufreq/intel_pstate: Fix wrong macro conversion x86/cpu: Cleanup the now unused CPU match macros hwrng: via_rng: Convert to new X86 CPU match macros crypto: Convert to new CPU match macros ASoC: Intel: Convert to new X86 CPU match macros powercap/intel_rapl: Convert to new X86 CPU match macros PCI: intel-mid: Convert to new X86 CPU match macros mmc: sdhci-acpi: Convert to new X86 CPU match macros intel_idle: Convert to new X86 CPU match macros extcon: axp288: Convert to new X86 CPU match macros thermal: Convert to new X86 CPU match macros hwmon: Convert to new X86 CPU match macros platform/x86: Convert to new CPU match macros EDAC: Convert to new X86 CPU match macros cpufreq: Convert to new X86 CPU match macros ACPI: Convert to new X86 CPU match macros x86/platform: Convert to new CPU match macros x86/kernel: Convert to new CPU match macros x86/kvm: Convert to new CPU match macros x86/perf/events: Convert to new CPU match macros ...
2020-03-30Merge branches 'pm-devfreq', 'powercap' and 'pm-docs'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: Get rid of some doc warnings PM / devfreq: Fix handling dev_pm_qos_remove_request result PM / devfreq: Fix a typo in a comment PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name PM / devfreq: Remove unneeded extern keyword PM / devfreq: Use constant name of userspace governor * powercap: powercap: idle_inject: Replace zero-length array with flexible-array member * pm-docs: docs: cpu-freq: convert cpufreq-stats.txt to ReST docs: cpu-freq: convert cpu-drivers.txt to ReST docs: cpu-freq: convert core.txt to ReST docs: cpu-freq: convert index.txt to ReST docs: cpufreq: fix a broken reference Documentation: cpufreq: Move legacy driver documentation
2020-03-26cpufreq: intel_pstate: Select schedutil as the default governorRafael J. Wysocki
Modify cpufreq Kconfig to select schedutil as the default governor if the intel_pstate driver has been selected and SMP support is enabled (because schedutil depends on SMP). Also select schedutil as well as the performance governor from the intel_pstate Kconfig section to ensure the equivalence of the passive and active mode governor configuration options. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-26cpufreq: intel_pstate: Simplify intel_pstate_cpu_init()Rafael J. Wysocki
The initial policy value set by intel_pstate_cpu_init() depends on whether or not CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is set, but that is not necessary, because the core will set the policy to "performance" in cpufreq_init_policy() if the default governor is "performance" anyway. Accordingly, change intel_pstate_cpu_init() to always set policy to CPUFREQ_POLICY_POWERSAVE initially to provide a valid fallback value to cpufreq_init_policy() in case the default cpufreq governor is neither "powersave" nor "performance". Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-25Merge branch 'x86/cpu' into perf/core, to resolve conflictIngo Molnar
Conflicts: arch/x86/events/intel/uncore.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-25cpufreq/intel_pstate: Fix wrong macro conversionThomas Gleixner
The feature flag hwp_support_ids are supposed to match on is X86_FEATURE_HWP, not X86_FEATURE_APERFMPERF. Fix it. [ bp: Write commit message. ] Fixes: b11d77fa300d ("cpufreq: Convert to new X86 CPU match macros") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200324060124.GC11705@shao2-debian
2020-03-25cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_work_fnPratik Rajesh Sampat
The patch avoids allocating cpufreq_policy on stack hence fixing frame size overflow in 'powernv_cpufreq_work_fn' Fixes: 227942809b52 ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling") Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200316135743.57735-1-psampat@linux.ibm.com
2020-03-24cpufreq: Convert to new X86 CPU match macrosThomas Gleixner
The new macro set has a consistent namespace and uses C99 initializers instead of the grufty C89 ones. Get rid the of most local macro wrappers for consistency. The ones which make sense for readability are renamed to X86_MATCH*. In the centrino driver this also removes the two extra duplicates of family 6 model 13 which have no value at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/87eetheu88.fsf@nanos.tec.linutronix.de
2020-03-24x86/devicetable: Move x86 specific macro out of generic codeThomas Gleixner
There is no reason that this gunk is in a generic header file. The wildcard defines need to stay as they are required by file2alias. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
2020-03-23Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq drivers updates for v5.7 from Viresh Kumar: "This pull request contains: - update to imx cpufreq drivers to improve their support (Anson Huang, Christoph Niedermaier, and Peng Fan). - Update to qcom cpufreq to support other krait based SoCs (Ansuel Smith). - Update ti cpufreq driver to support OPP_PLUS (Lokesh Vutla). - Update cpufreq-dt driver to allow platfoem specific intermediate callbacks (Peng Fan)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qcom: Add support for krait based socs cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling cpufreq: dt: Allow platform specific intermediate callbacks cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location cpufreq: imx6q: read OCOTP through nvmem for imx6q cpufreq: imx6q: fix error handling cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check cpufreq: ti-cpufreq: Add support for OPP_PLUS cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
2020-03-20cpufreq: qcom: Add support for krait based socsAnsuel Smith
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974 that has KRAIT processors the voltage/current value of each OPP varies based on the silicon variant in use. The required OPP related data is determined based on the efuse value. This is similar to the existing code for kryo cores. So adding support for krait cores here. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-03-17cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handlingAnson Huang
Improve the -EPROBE_DEFER handling logic to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-03-14cpufreq: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14cpufreq: intel_pstate: Consolidate policy verificationRafael J. Wysocki
There is still some code duplication between intel_pstate_verify_policy() and intel_cpufreq_verify_policy(), so avoid it by moving the common code into a separate function and calling it from both these places. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-13cpufreq: powernv: Fix unsafe notifiersOliver O'Halloran
The PowerNV cpufreq driver registers two notifiers: one to catch throttle messages from the OCC and one to bump the CPU frequency back to normal before a reboot. Both require the cpufreq driver to be registered in order to function since the notifier callbacks use various cpufreq_*() functions. Right now we register both notifiers before we've initialised the driver. This seems to work, but we should head off any protential problems by registering the notifiers after the driver is initialised. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200206062622.28235-2-oohall@gmail.com
2020-03-13cpufreq: powernv: Fix use-after-freeOliver O'Halloran
The cpufreq driver has a use-after-free that we can hit if: a) There's an OCC message pending when the notifier is registered, and b) The cpufreq driver fails to register with the core. When a) occurs the notifier schedules a workqueue item to handle the message. The backing work_struct is located on chips[].throttle and when b) happens we clean up by freeing the array. Once we get to the (now free) queued item and the kernel crashes. Fixes: c5e29ea7ac14 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com
2020-03-12cpufreq: dt: Allow platform specific intermediate callbacksPeng Fan
Platforms may need to implement platform specific get_intermediate and target_intermediate hooks. Update cpufreq-dt driver's platform data to contain those for such platforms. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>