summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/cpufreq-dt-platdev.c
AgeCommit message (Collapse)Author
2018-05-30cpufreq: Add Kryo CPU scaling driverIlia Lin
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, the CPU frequency subset and voltage value of each OPP varies based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables defines the voltage and frequency value based on the msm-id in SMEM and speedbin blown in the efuse combination. The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC to provide the OPP framework with required information. This is used to determine the voltage and frequency value for each OPP of operating-points-v2 table when it is parsed by the OPP framework. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15Revert "cpufreq: rcar: Add support for R8A7795 SoC"Simon Horman
This reverts commit 034def597bb73cbf29ffade7d8aec8408af8c743. This is no longer needed since the following commit and to the best of my knowledge is not relied on by any upstream DTS: edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15Revert "cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver"Simon Horman
This reverts commit bea2ebca6b917e46d0c585f416f1326fdf41e69b. This is no longer needed since the following commit and to the best of my knowledge is not relied on by any upstream DTS: edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13cpufreq: mediatek: add mediatek related projects into blacklistAndrew-sh Cheng
mediatek projects will use mediate-cpufreq.c as cpufreq driver, instead of using cpufreq_dt.c Add mediatek related projects into cpufreq-dt blacklist Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11cpufreq: dt: Remove support for Exynos4212 SoCsMarek Szyprowski
Support for Exynos4212 SoCs has been removed by commit bca9085e0ae9 "ARM: dts: exynos: remove Exynos4212 support (dead code)", so there is no need to keep remaining dead code related to this SoC version. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-03cpufreq: dt-platdev: drop socionext,uniphier-ld6b from whitelistMasahiro Yamada
As you see arch/arm/boot/dts/uniphier-ld6b.dtsi, it includes uniphier-pxs2.dtsi, which uses "operating-points-v2" property and whose cpufreq device is automatically created. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-26cpufreq: dt: Fix sysfs duplicate filename creation for platform-deviceSuniel Mahesh
ti-cpufreq and cpufreq-dt-platdev drivers are registering platform-device with same name "cpufreq-dt" using platform_device_register_*() routines. This is leading to build warnings appended below. Providing hardware information to OPP framework along with the platform- device creation should be done by ti-cpufreq driver before cpufreq-dt driver comes into place. This patch add's TI am33xx, am43 and dra7 platforms (which use opp-v2 property) to the blacklist of devices in cpufreq-dt-platform driver to avoid creating platform-device twice and remove build warnings. [ 2.370167] ------------[ cut here ]------------ [ 2.375087] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x58/0x78 [ 2.383112] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt' [ 2.391219] Modules linked in: [ 2.394506] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170912 #1 [ 2.402006] Hardware name: Generic AM33XX (Flattened Device Tree) [ 2.408437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14) [ 2.416568] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0) [ 2.424165] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104) [ 2.431488] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44) [ 2.439351] [<c01374d0>] (warn_slowpath_fmt) from [<c03459d0>] (sysfs_warn_dup+0x58/0x78) [ 2.447938] [<c03459d0>] (sysfs_warn_dup) from [<c0345ab8>] (sysfs_create_dir_ns+0x80/0x98) [ 2.456719] [<c0345ab8>] (sysfs_create_dir_ns) from [<c082c554>] (kobject_add_internal+0x9c/0x2d4) [ 2.466124] [<c082c554>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c) [ 2.474712] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c) [ 2.482489] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220) [ 2.491085] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118) [ 2.501305] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c) [ 2.511253] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 2.519838] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 2.528974] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110) [ 2.537565] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c) [ 2.545981] ---[ end trace 2fc00e213c13ab20 ]--- [ 2.551051] ------------[ cut here ]------------ [ 2.555931] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x254/0x2d4 [ 2.564578] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register things with the same name in the same directory. [ 2.577977] Modules linked in: [ 2.581261] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-next-20170912 #1 [ 2.590013] Hardware name: Generic AM33XX (Flattened Device Tree) [ 2.596437] [<c0110a28>] (unwind_backtrace) from [<c010ca84>] (show_stack+0x10/0x14) [ 2.604573] [<c010ca84>] (show_stack) from [<c0827d64>] (dump_stack+0xac/0xe0) [ 2.612172] [<c0827d64>] (dump_stack) from [<c0137470>] (__warn+0xd8/0x104) [ 2.619494] [<c0137470>] (__warn) from [<c01374d0>] (warn_slowpath_fmt+0x34/0x44) [ 2.627362] [<c01374d0>] (warn_slowpath_fmt) from [<c082c70c>] (kobject_add_internal+0x254/0x2d4) [ 2.636666] [<c082c70c>] (kobject_add_internal) from [<c082c7d8>] (kobject_add+0x4c/0x9c) [ 2.645255] [<c082c7d8>] (kobject_add) from [<c05803e4>] (device_add+0xcc/0x57c) [ 2.653027] [<c05803e4>] (device_add) from [<c0584b74>] (platform_device_add+0x100/0x220) [ 2.661615] [<c0584b74>] (platform_device_add) from [<c05855a8>] (platform_device_register_full+0xf4/0x118) [ 2.671833] [<c05855a8>] (platform_device_register_full) from [<c067023c>] (ti_cpufreq_init+0x150/0x22c) [ 2.681779] [<c067023c>] (ti_cpufreq_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170) [ 2.690377] [<c0101df4>] (do_one_initcall) from [<c0c00eb4>] (kernel_init_freeable+0x1fc/0x2c4) [ 2.699510] [<c0c00eb4>] (kernel_init_freeable) from [<c083bcac>] (kernel_init+0x8/0x110) [ 2.708106] [<c083bcac>] (kernel_init) from [<c0107d18>] (ret_from_fork+0x14/0x3c) [ 2.716217] ---[ end trace 2fc00e213c13ab21 ]--- Fixes: edeec420de24 (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2) Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-19cpufreq: dt-platdev: Add some missing platforms to the blacklistViresh Kumar
Commit edeec420de24 (cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2) missed adding few platforms to the blacklist which create the cpufreq-dt device from their own drivers, after some dependencies are sorted out. And for those platforms, both the platform specific driver and the cpufreq-dt-platdev driver try to create the cpufreq-dt device now. Fix that by including those platforms in the blacklist. This doesn't include the TI platforms, for which there is a separate patch. Fixes: edeec420de24 (cpufreq: dt-cpufreq: platdev Automatically create device with OPP v2) Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25cpufreq: dt-platdev: Drop few entries from whitelistViresh Kumar
Drop few ARM (32 and 64 bit) platforms from the whitelist which always use "operating-points-v2" property from their DT. They should continue to work after this patch. Tested on Hikey platform (only the "hisilicon,hi6220" entry). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-25cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2Viresh Kumar
The initial idea of creating the cpufreq-dt-platdev.c file was to keep a list of platforms that use the "operating-points" (V1) bindings and create cpufreq device for them only, as we weren't sure which platforms would want the device to get created automatically as some had their own cpufreq drivers as well, or wanted to initialize cpufreq after doing some stuff from platform code. But that wasn't the case with platforms using "operating-points-v2" property. We wanted the device to get created automatically without the need of adding them to the whitelist. Though, we will still have some exceptions where we don't want to create the device automatically. Rename the earlier platform list as *whitelist* and create a new *blacklist* as well. The cpufreq-dt device will get created if: - The platform is there in the whitelist OR - The platform has "operating-points-v2" property in CPU0's DT node and isn't part of the blacklist . Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18cpufreq: enable the DT cpufreq driver on the Ux500Linus Walleij
This enables the generic DT and OPP-based cpufreq driver on the ST-Ericsson Ux500 series. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18cpufreq: dt: Add r8a7796 support to to use generic cpufreq driverKhiem Nguyen
This patch adds the r8a7796 support the generic cpufreq driver by adding an appropriate compat string. This is in keeping with support for other Renesas ARM and arm64 based SoCs. Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com> [simon: new changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-08cpufreq: rcar: Add support for R8A7795 SoCKhiem Nguyen
After the commit "a399dc9fc50 cpufreq: shmobile: Use generic platdev driver", will use cpufreq-dt-platdev driver to enable cpufreq-dt support. Hence, follow the implementation to support new R8A7795 SoC. Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-04cpufreq: dt: Add rk3328 compatible to use generic cpufreq driverFinley Xiao
This patch adds the rk3328 compatible string for supporting the generic cpufreq driver on RK3328. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22cpufreq: dt: Don't use generic platdev driver for tangoMarc Gonzalez
On tango platforms, firmware configures the CPU clock, and Linux is then only allowed to use the cpu_clk_divider to change the frequency. Build the OPP table dynamically at init, in order to support whatever firmware throws at us. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-16cpufreq: dt: Add zynqmp to the cpufreq dt platdevShubhrajyoti Datta
Add zynqmp to the cpufreq dt platform device. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-24cpufreq: dt: Add support for hi3660Tao Wang
Add the compatible string for supporting the generic device tree cpufreq-dt driver on Hisilicon's 3660 SoC. Signed-off-by: Tao Wang <kevin.wangtao@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platformsDave Gerlach
Some TI platforms, specifically those in the am33xx, am43xx, dra7xx, and am57xx families of SoCs can make use of the ti-cpufreq driver to selectively enable OPPs based on the exact configuration in use. The ti-cpufreq is given the responsibility of creating the cpufreq-dt platform device when the driver is in use so drop am33xx and dra7xx from the cpufreq-dt-platdev driver so it is not created twice. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-05cpufreq: dt: Add support for APM X-Gene 2Hoan Tran
Add the compatible string for supporting the generic device tree cpufreq-dt driver on APM's X-Gene 2 SoC. Signed-off-by: Hoan Tran <hotran@apm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30cpufreq: dt: Add support for zx296718Baoyou Xie
Add the compatible string for supporting the generic cpufreq driver on the ZTE's zx296718 SoC. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-16cpufreq: dt: Add support for r8a7743 and r8a7745Geert Uytterhoeven
Add the compatible strings for supporting the generic cpufreq driver on the Renesas RZ/G1M (r8a7743) and RZ/G1E (r8a7745) SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11cpufreq: pxa: use generic platdev driver for device-treeRobert Jarzmik
For device-tree based pxa25x and pxa27x platforms, cpufreq-dt driver is doing the job as well as pxa2xx-cpufreq, so add these platforms to the compatibility list. This won't work for legacy non device-tree platforms where pxa2xx-cpufreq is still required. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: dt: add Socionext UniPhier SoCs supportMasahiro Yamada
Add compatible strings for Pro5, PXs2, LD6b, LD11, LD20 SoCs to use the generic cpufreq driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01cpufreq: enable the DT cpufreq driver on the IntegratorsLinus Walleij
This enables the generic DT and OPP-based cpufreq driver on the ARM Integrator/AP and Integrator/CP. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-16cpufreq: ti: Use generic platdev driverDave Gerlach
Now that the cpufreq-dt-platdev is used to create the cpufreq-dt platform device for all OMAP platforms and the platform code that did it before has been removed, add ti,am33xx and ti,dra7xx to the machine list in cpufreq-dt-platdev which had relied on the removed platform code to do this previously. Fixes: 7694ca6e1d6f (cpufreq: omap: Use generic platdev driver) Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13cpufreq: dt: Support governor tunables per policyViresh Kumar
The cpufreq-dt driver is also used for systems with multiple clock/voltage domains for CPUs, i.e. multiple cpufreq policies in a system. And in such cases the platform users may want to enable "governor tunables per policy". Support that via platform data, as not all users of the driver would want that behavior. Reported-by: Juri Lelli <Juri.Lelli@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13cpufreq: dt: Add support for r8a7792Geert Uytterhoeven
Add the compatible string for supporting the generic cpufreq driver on the Renesas R-Car V2H (r8a7792) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-12Merge back earlier cpufreq material for v4.9.Rafael J. Wysocki
2016-08-31cpufreq: dt: Add terminate entry for of_device_id tablesWei Yongjun
Make sure of_device_id tables are NULL terminated. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Fixes: f56aad1d98f1 (cpufreq: dt: Add generic platform-device creation support) CC: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-16cpufreq: dt: Add exynos5433 compatible to use generic cpufreq driverChanwoo Choi
This patch adds the exynos5433 compatible string for supporting the generic cpufreq driver on Exynos5433. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-27cpufreq: dt: call of_node_put() before error outMasahiro Yamada
If of_match_node() fails, this init function bails out without calling of_node_put(). Also change of_node_put(of_root) to of_node_put(np); both of them hold the same pointer, but it seems better to call of_node_put() against the node returned by of_find_node_by_path(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05cpufreq: tango: Use generic platdev driverMarc Gonzalez
Add tango4 compatible string to the list. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: hisilicon: Use generic platdev driverViresh Kumar
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: zynq: Use generic platdev driverViresh Kumar
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: sunxi: Use generic platdev driverViresh Kumar
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: shmobile: Use generic platdev driverViresh Kumar
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: rockchip: Use generic platdev driverFinley Xiao
This patch add rockchip's compatible string to the compat list and remove similar code from platform code for supporting generic platdev driver. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: omap: Use generic platdev driverViresh Kumar
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: imx: Use generic platdev driverViresh Kumar
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Note that the complete routine imx27_dt_init() is removed as of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); has same effect as a NULL .init_machine machine callback pointer. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: berlin: Use generic platdev driverViresh Kumar
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: dt: Mark platdev machines array as __initconstViresh Kumar
The machines array in cpufreq-dt-platdev is used only once at boot time and so should be marked with __initconst, so that kernel can free up memory used for it, if required. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09cpufreq: exynos: Use generic platdev driverViresh Kumar
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09cpufreq: dt: Add generic platform-device creation supportViresh Kumar
Multiple platforms are using the generic cpufreq-dt driver now, and all of them are required to create a platform device with name "cpufreq-dt", in order to get the cpufreq-dt probed. Many of them do it from platform code, others have special drivers just to do that. It would be more sensible to do this at a generic place, where all such platform can mark their entries. This patch adds a separate file to get this device created. Currently the compat list of platforms that we support is empty, and will be filled in as and when we move platforms to use it. It always compiles as part of the kernel and so doesn't need a module-exit operation. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 01:18:54 +0000