summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)Author
2021-01-18clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is definedTom Rix
When DEBUG is defined this error occurs drivers/clocksource/mxs_timer.c:138:1: error: expected ‘;’ before ‘}’ token The preceding statement needs a semicolon. Replace pr_info() with pr_debug() and remove the unneeded ifdef. Fixes: eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com
2021-01-18clocksource/drivers/davinci: Move pr_fmt() before the includesBartosz Golaszewski
We no longer need to undef pr_fmt if we define our own before including any headers. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210111140814.3668-1-brgl@bgdev.pl
2021-01-18clocksource/drivers/efm32: Drop unused timer codeUwe Kleine-König
Support for this machine was just removed, so drop the now unused timer code, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210115155130.185010-4-u.kleine-koenig@pengutronix.de
2021-01-18clocksource/drivers/sh_cmt: Make sure channel clock supply is enabledGeert Uytterhoeven
The Renesas Compare Match Timer 0 and 1 (CMT0/1) variants have a register to control the clock supply to the individual channels. Currently the driver does not touch this register, and relies on the documented initial value, which has the clock supply enabled for all channels present. However, when Linux starts on the APE6-EVM development board, only the clock supply to the first CMT1 channel is enabled. Hence the first channel (used as a clockevent) works, while the second channel (used as a clocksource) does not. Note that the default system clocksource is the Cortex-A15 architectured timer, and the user needs to manually switch to the CMT1 clocksource to trigger the broken behavior. Fix this by removing the fragile dependency on implicit reset and/or boot loader state, and by enabling the clock supply explicitly for all channels used instead. This requires postponing the clk_disable() call, else the timer's registers cannot be accessed in sh_cmt_setup_channel(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210194648.2901899-1-geert+renesas@glider.be
2021-01-18clocksource/drivers/ixp4xx: Select TIMER_OF when neededArnd Bergmann
Compile-testing the ixp4xx timer with CONFIG_OF enabled but CONFIG_TIMER_OF disabled leads to a harmless warning: arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ixp4xx.o' being placed in section `__timer_of_table' Move the select statement from the platform code into the driver so it always gets enabled in configurations that rely on it. Fixes: 40df14cc5cc0 ("clocksource/drivers/ixp4xx: Add OF initialization support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210103135955.3808976-1-arnd@kernel.org
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-12-15Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-12-07clocksource/drivers/sh_cmt: Fix potential deadlock when calling runtime PMNiklas Söderlund
The ch->lock is used to protect the whole enable() and read() of sh_cmt's implementation of struct clocksource. The enable() implementation calls pm_runtime_get_sync() which may result in the clock source to be read() triggering a cyclic lockdep warning for the ch->lock. The sh_cmt driver implement its own balancing of calls to sh_cmt_{enable,disable}() with flags in sh_cmt_{start,stop}(). It does this to deal with that start and stop are shared between the clock source and clock event providers. While this could be improved on verifying corner cases based on any substantial rework on all devices this driver supports might prove hard. As a first step separate the PM handling for clock event and clock source. Always put/get the device when enabling/disabling the clock source but keep the clock event logic unchanged. This allows the sh_cmt implementation of struct clocksource to call PM without holding the ch->lock and avoiding the deadlock. Triggering and log of the deadlock warning, # echo e60f0000.timer > /sys/devices/system/clocksource/clocksource0/current_clocksource [ 46.948370] ====================================================== [ 46.954730] WARNING: possible circular locking dependency detected [ 46.961094] 5.10.0-rc6-arm64-renesas-00001-g0e5fd7414e8b #36 Not tainted [ 46.967985] ------------------------------------------------------ [ 46.974342] migration/0/11 is trying to acquire lock: [ 46.979543] ffff0000403ed220 (&dev->power.lock){-...}-{2:2}, at: __pm_runtime_resume+0x40/0x74 [ 46.988445] [ 46.988445] but task is already holding lock: [ 46.994441] ffff000040ad0298 (&ch->lock){....}-{2:2}, at: sh_cmt_start+0x28/0x210 [ 47.002173] [ 47.002173] which lock already depends on the new lock. [ 47.002173] [ 47.010573] [ 47.010573] the existing dependency chain (in reverse order) is: [ 47.018262] [ 47.018262] -> #3 (&ch->lock){....}-{2:2}: [ 47.024033] lock_acquire.part.0+0x120/0x330 [ 47.028970] lock_acquire+0x64/0x80 [ 47.033105] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.038130] sh_cmt_start+0x28/0x210 [ 47.042352] sh_cmt_clocksource_enable+0x28/0x50 [ 47.047644] change_clocksource+0x9c/0x160 [ 47.052402] multi_cpu_stop+0xa4/0x190 [ 47.056799] cpu_stopper_thread+0x90/0x154 [ 47.061557] smpboot_thread_fn+0x244/0x270 [ 47.066310] kthread+0x154/0x160 [ 47.070175] ret_from_fork+0x10/0x20 [ 47.074390] [ 47.074390] -> #2 (tk_core.seq.seqcount){----}-{0:0}: [ 47.081136] lock_acquire.part.0+0x120/0x330 [ 47.086070] lock_acquire+0x64/0x80 [ 47.090203] seqcount_lockdep_reader_access.constprop.0+0x74/0x100 [ 47.097096] ktime_get+0x28/0xa0 [ 47.100960] hrtimer_start_range_ns+0x210/0x2dc [ 47.106164] generic_sched_clock_init+0x70/0x88 [ 47.111364] sched_clock_init+0x40/0x64 [ 47.115853] start_kernel+0x494/0x524 [ 47.120156] [ 47.120156] -> #1 (hrtimer_bases.lock){-.-.}-{2:2}: [ 47.126721] lock_acquire.part.0+0x120/0x330 [ 47.136042] lock_acquire+0x64/0x80 [ 47.144461] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.153721] hrtimer_start_range_ns+0x68/0x2dc [ 47.163054] rpm_suspend+0x308/0x5dc [ 47.171473] rpm_idle+0xc4/0x2a4 [ 47.179550] pm_runtime_work+0x98/0xc0 [ 47.188209] process_one_work+0x294/0x6f0 [ 47.197142] worker_thread+0x70/0x45c [ 47.205661] kthread+0x154/0x160 [ 47.213673] ret_from_fork+0x10/0x20 [ 47.221957] [ 47.221957] -> #0 (&dev->power.lock){-...}-{2:2}: [ 47.236292] check_noncircular+0x128/0x140 [ 47.244907] __lock_acquire+0x13b0/0x204c [ 47.253332] lock_acquire.part.0+0x120/0x330 [ 47.262033] lock_acquire+0x64/0x80 [ 47.269826] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.278430] __pm_runtime_resume+0x40/0x74 [ 47.286758] sh_cmt_start+0x84/0x210 [ 47.294537] sh_cmt_clocksource_enable+0x28/0x50 [ 47.303449] change_clocksource+0x9c/0x160 [ 47.311783] multi_cpu_stop+0xa4/0x190 [ 47.319720] cpu_stopper_thread+0x90/0x154 [ 47.328022] smpboot_thread_fn+0x244/0x270 [ 47.336298] kthread+0x154/0x160 [ 47.343708] ret_from_fork+0x10/0x20 [ 47.351445] [ 47.351445] other info that might help us debug this: [ 47.351445] [ 47.370225] Chain exists of: [ 47.370225] &dev->power.lock --> tk_core.seq.seqcount --> &ch->lock [ 47.370225] [ 47.392003] Possible unsafe locking scenario: [ 47.392003] [ 47.405314] CPU0 CPU1 [ 47.413569] ---- ---- [ 47.421768] lock(&ch->lock); [ 47.428425] lock(tk_core.seq.seqcount); [ 47.438701] lock(&ch->lock); [ 47.447930] lock(&dev->power.lock); [ 47.455172] [ 47.455172] *** DEADLOCK *** [ 47.455172] [ 47.471433] 3 locks held by migration/0/11: [ 47.479099] #0: ffff8000113c9278 (timekeeper_lock){-.-.}-{2:2}, at: change_clocksource+0x2c/0x160 [ 47.491834] #1: ffff8000113c8f88 (tk_core.seq.seqcount){----}-{0:0}, at: multi_cpu_stop+0xa4/0x190 [ 47.504727] #2: ffff000040ad0298 (&ch->lock){....}-{2:2}, at: sh_cmt_start+0x28/0x210 [ 47.516541] [ 47.516541] stack backtrace: [ 47.528480] CPU: 0 PID: 11 Comm: migration/0 Not tainted 5.10.0-rc6-arm64-renesas-00001-g0e5fd7414e8b #36 [ 47.542147] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 47.554241] Call trace: [ 47.560832] dump_backtrace+0x0/0x190 [ 47.568670] show_stack+0x14/0x30 [ 47.576144] dump_stack+0xe8/0x130 [ 47.583670] print_circular_bug+0x1f0/0x200 [ 47.592015] check_noncircular+0x128/0x140 [ 47.600289] __lock_acquire+0x13b0/0x204c [ 47.608486] lock_acquire.part.0+0x120/0x330 [ 47.616953] lock_acquire+0x64/0x80 [ 47.624582] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.633114] __pm_runtime_resume+0x40/0x74 [ 47.641371] sh_cmt_start+0x84/0x210 [ 47.649115] sh_cmt_clocksource_enable+0x28/0x50 [ 47.657916] change_clocksource+0x9c/0x160 [ 47.666165] multi_cpu_stop+0xa4/0x190 [ 47.674056] cpu_stopper_thread+0x90/0x154 [ 47.682308] smpboot_thread_fn+0x244/0x270 [ 47.690560] kthread+0x154/0x160 [ 47.697927] ret_from_fork+0x10/0x20 [ 47.708447] clocksource: Switched to clocksource e60f0000.timer Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201205021921.1456190-2-niklas.soderlund+renesas@ragnatech.se
2020-12-05clocksource/drivers/arm_arch_timer: Correct fault programming of ↵Keqian Zhu
CNTKCTL_EL1.EVNTI ARM virtual counter supports event stream, it can only trigger an event when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes, so the actual period of event stream is 2^(cntkctl_evnti + 1). For example, when the trigger bit is 0, then virtual counter trigger an event for every two cycles. While we're at it, rework the way we compute the trigger bit position by making it more obvious that when bits [n:n-1] are both set (with n being the most significant bit), we pick bit (n + 1). Fixes: 037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream") Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201204073126.6920-3-zhukeqian1@huawei.com
2020-12-05clocksource/drivers/arm_arch_timer: Use stable count reader in erratum sneKeqian Zhu
In commit 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters"), we separate stable and normal count reader to omit unnecessary overhead on systems that have no timer erratum. However, in erratum_set_next_event_tval_generic(), count reader becomes normal reader. This converts it to stable reader. Fixes: 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters") Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201204073126.6920-2-zhukeqian1@huawei.com
2020-12-05clocksource/drivers/dw_apb_timer_of: Add error handling if no clock availableDinh Nguyen
commit ("b0fc70ce1f02 arm64: berlin: Select DW_APB_TIMER_OF") added the support for the dw_apb_timer into the arm64 defconfig. However, for some platforms like the Intel Stratix10 and Agilex, the clock manager doesn't get loaded until after the timer driver get loaded. Thus, the driver hits the panic "No clock nor clock-frequency property for" because it cannot properly get the clock. This patch adds the error handling needed for the timer driver so that the kernel can continue booting instead of just hitting the panic. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201205105223.208604-1-dinguyen@kernel.org
2020-12-03clocksource/drivers/riscv: Make RISCV_TIMER depends on RISCV_SBIKefeng Wang
The riscv timer is set via SBI timer call, let's make RISCV_TIMER depends on RISCV_SBI, and it also fixes some build issue. Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201028131230.72907-1-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/ingenic: Fix section mismatchDaniel Lezcano
The function ingenic_tcu_get_clock() is annotated for the __init section but it is actually called from the online cpu callback. That will lead to a crash if a CPU is hotplugged after boot time. Remove the __init annotation for the ingenic_tcu_get_clock() function. Fixes: f19d838d08fc (clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20201125102346.1816310-1-daniel.lezcano@linaro.org
2020-12-03clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent()Yu Kuai
If clk_notifier_register() failed, ttc_setup_clockevent() will return without freeing 'ttcce', which will leak memory. Fixes: 70504f311d4b ("clocksource/drivers/cadence_ttc: Convert init function to return error") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201116135123.2164033-1-yukuai3@huawei.com
2020-12-03clocksource/drivers/orion: Add missing clk_disable_unprepare() on error pathYang Yingliang
After calling clk_prepare_enable(), clk_disable_unprepare() need be called on error path. Fixes: fbe4b3566ddc ("clocksource/drivers/orion: Convert init function...") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201111064706.3397156-1-yangyingliang@huawei.com
2020-12-03clocksource/drivers/nps: Remove EZChip NPS clocksource driverVineet Gupta
NPS platform has been removed from ARC port and there are no in-tree users of it now. So RIP ! Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201105212210.1891598-2-vgupta@synopsys.com
2020-12-03clocksource/drivers/sp804: Use pr_fmtKefeng Wang
Add pr_fmt to prefix pr_<level> output. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029123317.90286-5-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/sp804: Correct clk_get_rate handleKefeng Wang
clk_get_rate won't return negative value, correct clk_get_rate handle. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029123317.90286-4-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/sp804: Use clk_prepare_enable and clk_disable_unprepareKefeng Wang
Directly use clk_prepare_enable and clk_disable_unprepare. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029123317.90286-3-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/sp804: Make some symbol staticKefeng Wang
drivers/clocksource/timer-sp804.c:38:31: warning: symbol 'arm_sp804_timer' was not declared. Should it be static? drivers/clocksource/timer-sp804.c:47:31: warning: symbol 'hisi_sp804_timer' was not declared. Should it be static? drivers/clocksource/timer-sp804.c:120:12: warning: symbol 'sp804_clocksource_and_sched_clock_init' was not declared. Should it be static? drivers/clocksource/timer-sp804.c:219:12: warning: symbol 'sp804_clockevents_init' was not declared. Should it be static? And move __initdata after the variables. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029123317.90286-2-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/sp804: Add static for functions such as ↵Zhen Lei
sp804_clockevents_init() Add static for sp804_clocksource_and_sched_clock_init() and sp804_clockevents_init(), they are only used in timer-sp804.c now. Otherwise, the following warning will be reported: drivers/clocksource/timer-sp804.c:68:12: warning: no previous prototype \ for 'sp804_clocksource_and_sched_clock_init' [-Wmissing-prototypes] drivers/clocksource/timer-sp804.c:162:12: warning: no previous prototype \ for 'sp804_clockevents_init' [-Wmissing-prototypes] Fixes: 975434f8b24a ("clocksource/drivers/sp804: Delete the leading "__" of some functions") Fixes: 65f4d7ddc7b6 ("clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201021012259.2067-2-thunder.leizhen@huawei.com
2020-11-10PM: domains: Rename pm_genpd_syscore_poweroff|poweron()Ulf Hansson
To better describe what the pm_genpd_syscore_poweroff|poweron() functions actually do, let's rename them to dev_pm_genpd_suspend|resume() and update the rather few callers of them accordingly (a couple of clocksource drivers). Moreover, let's take the opportunity to add some documentation of these exported functions, as that is currently missing. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-30timekeeping: remove arch_gettimeoffsetArnd Bergmann
With Arm EBSA110 gone, nothing uses it any more, so the corresponding code and the Kconfig option can be removed. Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14Merge tag 'hyperv-next-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - a series from Boqun Feng to support page size larger than 4K - a few miscellaneous clean-ups * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions x86/hyperv: Remove aliases with X64 in their name PCI: hv: Document missing hv_pci_protocol_negotiation() parameter scsi: storvsc: Support PAGE_SIZE larger than 4K Driver: hv: util: Use VMBUS_RING_SIZE() for ringbuffer sizes HID: hyperv: Use VMBUS_RING_SIZE() for ringbuffer sizes Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizes hv_netvsc: Use HV_HYP_PAGE_SIZE for Hyper-V communication hv: hyperv.h: Introduce some hvpfn helper functions Drivers: hv: vmbus: Move virt_to_hvpfn() to hyperv header Drivers: hv: Use HV_HYP_PAGE in hv_synic_enable_regs() Drivers: hv: vmbus: Introduce types of GPADL Drivers: hv: vmbus: Move __vmbus_open() Drivers: hv: vmbus: Always use HV_HYP_PAGE_SIZE for gpadl drivers: hv: remove cast from hyperv_die_event
2020-10-12Merge tag 'timers-core-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping updates from Thomas Gleixner: "Updates for timekeeping, timers and related drivers: Core: - Early boot support for the NMI safe timekeeper by utilizing local_clock() up to the point where timekeeping is initialized. This allows printk() to store multiple timestamps in the ringbuffer which is useful for coordinating dmesg information across a fleet of machines. - Provide a multi-timestamp accessor for printk() - Make timer init more robust by checking for invalid timer flags. - Comma vs semicolon fixes Drivers: - Support for new platforms in existing drivers (SP804 and Renesas CMT) - Comma vs semicolon fixes * tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/armada-370-xp: Use semicolons rather than commas to separate statements clocksource/drivers/mps2-timer: Use semicolons rather than commas to separate statements timers: Mask invalid flags in do_init_timer() clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode clocksource/drivers/sp804: Add support for Hisilicon sp804 timer clocksource/drivers/sp804: Support non-standard register offset clocksource/drivers/sp804: Prepare for support non-standard register offset clocksource/drivers/sp804: Remove a mismatched comment clocksource/drivers/sp804: Delete the leading "__" of some functions clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h clocksource/drivers/sp804: Cleanup clk_get_sys() dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support alarmtimer: Convert comma to semicolon timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper timekeeping: Utilize local_clock() for NMI safe timekeeper during early boot
2020-10-02clocksource/drivers/armada-370-xp: Use semicolons rather than commas to ↵Julia Lawall
separate statements Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1601233948-11629-17-git-send-email-Julia.Lawall@inria.fr
2020-10-01clocksource/drivers/mps2-timer: Use semicolons rather than commas to ↵Julia Lawall
separate statements Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1601233948-11629-12-git-send-email-Julia.Lawall@inria.fr
2020-09-29clocksource: clint: Export clint_time_val for modulesPalmer Dabbelt
clint_time_val will soon be used by the RISC-V implementation of random_get_entropy(), which is a static inline function that may be used by modules (at least CRYPTO_JITTERENTROPY=m). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-09-28hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functionsMohammed Gamal
When selecting function_graph tracer with the command: # echo function_graph > /sys/kernel/debug/tracing/current_tracer The kernel crashes with the following stack trace: [69703.122389] BUG: stack guard page was hit at 000000001056545c (stack is 00000000fa3f8fed..0000000005d39503) [69703.122403] kernel stack overflow (double-fault): 0000 [#1] SMP PTI [69703.122413] CPU: 0 PID: 16982 Comm: bash Kdump: loaded Not tainted 4.18.0-236.el8.x86_64 #1 [69703.122420] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [69703.122433] RIP: 0010repare_ftrace_return+0xa/0x110 [69703.122458] Code: 05 00 0f 0b 48 c7 c7 10 ca 69 ae 0f b6 f0 e8 4b 52 0c 00 31 c0 eb ca 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 41 54 <53> 48 83 ec 18 65 48 8b 04 25 28 00 00 00 48 89 45 d8 31 c0 48 85 [69703.122467] RSP: 0018:ffffbd6d01118000 EFLAGS: 00010086 [69703.122476] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000003 [69703.122484] RDX: 0000000000000000 RSI: ffffbd6d011180d8 RDI: ffffffffadce7550 [69703.122491] RBP: ffffbd6d01118018 R08: 0000000000000000 R09: ffff9d4b09266000 [69703.122498] R10: ffff9d4b0fc04540 R11: ffff9d4b0fc20a00 R12: ffff9d4b6e42aa90 [69703.122506] R13: ffff9d4b0fc20ab8 R14: 00000000000003e8 R15: ffffbd6d0111837c [69703.122514] FS: 00007fd5f2588740(0000) GS:ffff9d4b6e400000(0000) knlGS:0000000000000000 [69703.122521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [69703.122528] CR2: ffffbd6d01117ff8 CR3: 00000000565d8001 CR4: 00000000003606f0 [69703.122538] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [69703.122545] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [69703.122552] Call Trace: [69703.122568] ftrace_graph_caller+0x6b/0xa0 [69703.122589] ? read_hv_sched_clock_tsc+0x5/0x20 [69703.122599] read_hv_sched_clock_tsc+0x5/0x20 [69703.122611] sched_clock+0x5/0x10 [69703.122621] sched_clock_local+0x12/0x80 [69703.122631] sched_clock_cpu+0x8c/0xb0 [69703.122644] trace_clock_global+0x21/0x90 [69703.122655] ring_buffer_lock_reserve+0x100/0x3c0 [69703.122671] trace_buffer_lock_reserve+0x16/0x50 [69703.122683] __trace_graph_entry+0x28/0x90 [69703.122695] trace_graph_entry+0xfd/0x1a0 [69703.122705] ? read_hv_clock_tsc_cs+0x10/0x10 [69703.122714] ? sched_clock+0x5/0x10 [69703.122723] prepare_ftrace_return+0x99/0x110 [69703.122734] ? read_hv_clock_tsc_cs+0x10/0x10 [69703.122743] ? sched_clock+0x5/0x10 [69703.122752] ftrace_graph_caller+0x6b/0xa0 [69703.122768] ? read_hv_clock_tsc_cs+0x10/0x10 [69703.122777] ? sched_clock+0x5/0x10 [69703.122786] ? read_hv_sched_clock_tsc+0x5/0x20 [69703.122796] ? ring_buffer_unlock_commit+0x1d/0xa0 [69703.122805] read_hv_sched_clock_tsc+0x5/0x20 [69703.122814] ftrace_graph_caller+0xa0/0xa0 [ ... recursion snipped ... ] Setting the notrace attribute for read_hv_sched_clock_msr() and read_hv_sched_clock_tsc() fixes it. Fixes: bd00cd52d5be ("clocksource/drivers/hyperv: Add Hyper-V specific sched clock function") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Link: https://lore.kernel.org/r/20200924151117.767442-1-mgamal@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-09-27Merge tag 'timers-urgent-2020-09-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A set of clocksource/clockevents updates: - Reset the TI/DM timer before enabling it instead of doing it the other way round. - Initialize the reload value for the GX6605s timer correctly so the hardware counter starts at 0 again after overrun. - Make error return value negative in the h8300 timer init function" * tag 'timers-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-gx6605s: Fixup counter reload clocksource/drivers/timer-ti-dm: Do reset before enable clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init()
2020-09-24clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit modeZhen Lei
A 100MHZ 32-bit timer will be wrapped up less than 43s. Although the kernel maintains a software high 32-bit count in the tick IRQ. But it's not applicable to the user mode APPs. Note: The kernel still uses the lower 32 bits of the timer. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-9-thunder.leizhen@huawei.com
2020-09-24clocksource/drivers/sp804: Add support for Hisilicon sp804 timerZhen Lei
The ARM SP804 supports a maximum of 32-bit counter, but Hisilicon extends it to 64-bit. That means, the registers: TimerXload, TimerXValue and TimerXBGLoad are 64bits, all other registers are the same as those in the SP804. The driver code can be completely reused except that the register offset is different. Use compatible = "hisilicon,sp804" mark as Hisilicon sp804 timer. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-8-thunder.leizhen@huawei.com
2020-09-24clocksource/drivers/sp804: Support non-standard register offsetZhen Lei
The ARM SP804 supports a maximum of 32-bit counter, but Hisilicon extends it to 64-bit. That means, the registers: TimerXload, TimerXValue and TimerXBGLoad are 64bits, all other registers are the same as those in the SP804. The driver code can be completely reused except that the register offset is different. Currently, we get a timer register address by: add the constant register offset to the timer base address. e.g. "base + TIMER_CTRL". It can not be dynamically adjusted at run time. So create a new structure "sp804_timer" to record the original registers offset, and create a new structure "sp804_clkevt" to record the calculated registers address. So the "base + TIMER_CTRL" is changed to "clkevt->ctrl", this will faster than "base + timer->ctrl". For example: struct sp804_timer arm_sp804_timer = { .ctrl = TIMER_CTRL, }; struct sp804_clkevt clkevt; clkevt.ctrl = base + arm_sp804_timer.ctrl. - writel(0, base + TIMER_CTRL); + writel(0, clkevt->ctrl); Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-7-thunder.leizhen@huawei.com
2020-09-24clocksource/drivers/sp804: Prepare for support non-standard register offsetZhen Lei
Add two local variables: timer1_base and timer2_base in sp804_of_init(), to avoid repeatedly calculate the base address of timer2, and make it easier to recognize timer1. Hope to make the next patch looks more clear. No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-6-thunder.leizhen@huawei.com
2020-09-24clocksource/drivers/sp804: Remove a mismatched commentZhen Lei
writel(0, base + TIMER_CTRL); ... ... writel(xxx | TIMER_CTRL_PERIODIC, base + TIMER_CTRL); The timer is just temporarily disabled, and it will be set to periodic mode later. The description of the field TimerMode of the register TimerXControl as shown below: 0 = Timer module is in free-running mode (default) 1 = Timer module is in periodic mode. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-5-thunder.leizhen@huawei.com
2020-09-24clocksource/drivers/sp804: Delete the leading "__" of some functionsZhen Lei
Delete the leading "__" of __sp804_clocksource_and_sched_clock_init() and __sp804_clockevents_init(), make it looks a little more comfortable. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-4-thunder.leizhen@huawei.com
2020-09-24clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.hZhen Lei
Since commit 7484c727b636 ("ARM: realview: delete the RealView board files") and commit 16956fed35fe ("ARM: versatile: switch to DT only booting and remove legacy code"), there's no one to use the functions defined or declared in include/clocksource/timer-sp804.h. Delete it. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-3-thunder.leizhen@huawei.com
2020-09-24clocksource/drivers/sp804: Cleanup clk_get_sys()Kefeng Wang
Move the clk_get_sys() part into sp804_get_clock_rate(), cleanup the same code. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200918132237.3552-2-thunder.leizhen@huawei.com
2020-09-20Merge tag 'riscv-for-linus-5.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix for a lockdep issue to avoid an asserting triggering during early boot. There shouldn't be any incorrect behavior as the system isn't concurrent at the time. - The addition of a missing fence when installing early fixmap mappings. - A corretion to the K210 device tree's interrupt map. - A fix for M-mode timer handling on the K210. * tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Resurrect the MMIO timer implementation for M-mode systems riscv: Fix Kendryte K210 device tree riscv: Add sfence.vma after early page table changes RISC-V: Take text_mutex in ftrace_init_nop()
2020-09-19RISC-V: Resurrect the MMIO timer implementation for M-mode systemsPalmer Dabbelt
The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs in the NOMMU systems that means we can't use rdtime. The K210 is the only system that anyone is currently running NOMMU or M-mode on, so here we're just inlining the timer read directly. This also adds the CLINT driver as an !MMU dependency, as it's currently the only timer driver availiable for these systems and without it we get a build failure for some configurations. Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-24clocksource/drivers/timer-gx6605s: Fixup counter reloadGuo Ren
When the timer counts to the upper limit, an overflow interrupt is generated, and the count is reset with the value in the TIME_INI register. But the software expects to start counting from 0 when the count overflows, so it forces TIME_INI to 0 to solve the potential interrupt storm problem. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Tested-by: Xu Kai <xukai@nationalchip.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1597735877-71115-1-git-send-email-guoren@kernel.org
2020-08-24clocksource/drivers/timer-ti-dm: Do reset before enableTony Lindgren
Commit 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4") exposed a new issue for type2 dual mode timers on at least omap5 where the clockevent will stop when the SoC starts entering idle states during the boot. Turns out we are wrongly first enabling the system timer and then resetting it, while we must also re-enable it after reset. The current sequence leaves the timer module in a partially initialized state. This issue went unnoticed earlier with ti-sysc driver reconfiguring the timer module until we fixed the issue of ti-sysc reconfiguring system timers. Let's fix the issue by calling dmtimer_systimer_enable() from reset for both type1 and type2 timers, and switch the order of reset and enable in dmtimer_systimer_setup(). Let's also move dmtimer_systimer_enable() and dmtimer_systimer_disable() to do this without adding forward declarations. Fixes: 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4") Reported-by: H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200817092428.6176-1-tony@atomide.com
2020-08-24clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init()Tianjia Zhang
In the init function, if the call to of_iomap() fails, the return value is ENXIO instead of -ENXIO. Change to the right negative errno. Fixes: 691f8f878290f ("clocksource/drivers/h8300_timer8: Convert init function to return error") Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200802111541.5429-1-tianjia.zhang@linux.alibaba.com
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-20RISC-V: Remove CLINT related code from timer and archAnup Patel
Right now the RISC-V timer driver is convoluted to support: 1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for clocksource and SBI timer calls for clockevent device. 2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO counter register for clocksource and CLINT MMIO compare register for clockevent device. We now have a separate CLINT timer driver which also provide CLINT based IPI operations so let's remove CLINT MMIO related code from arch/riscv directory and RISC-V timer driver. Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Emil Renner Berhing <kernel@esmil.dk> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-20clocksource/drivers: Add CLINT timer driverAnup Patel
We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e. RISC-V NoMMU kernel). The CLINT MMIO device provides three things: 1. 64bit free running counter register 2. 64bit per-CPU time compare registers 3. 32bit per-CPU inter-processor interrupt registers Unlike other timer devices, CLINT provides IPI registers along with timer registers. To use CLINT IPI registers, the CLINT timer driver provides IPI related callbacks to arch/riscv. Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Emil Renner Berhing <kernel@esmil.dk> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-08-15Merge tag 'mfd-next-5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks - Make better attempt at matching device with the correct OF node - Allow batch removal of hierarchical sub-devices New Drivers - Add STM32 Clocksource driver - Add support for Khadas System Control Microcontroller Driver Removal - Remove unused driver for TI's SMSC ECE1099 New Device Support - Add support for Intel Emmitsburg PCH to Intel LPSS PCI - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI - Add support for Dialog DA revision to Dialog DA9063 New Functionality - Add support for AXP803 to be probed by I2C Fix-ups - Numerous W=1 warning fixes - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller) - Enabled Regmap 'fast I/O' in stm32-lptimer - Change BUG_ON to WARN_ON in arizona-core - Remove superfluous code/initialisation (madera, max14577) - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private) - Switch to of_platform_populate() in sprd-sc27xx-spi - Expand out set/get brightness/pwm macros in lm3533-ctrlbank - Disable IRQs on suspend in motorola-cpcap - Clean-up error handling in intel_soc_pmic_mrfld - Ensure correct removal order of sub-devices in madera - Many s/HTTP/HTTPS/ link changes - Ensure name used with Regmap is unique in syscon Bug Fixes - Properly 'put' clock on unbind and error in arizona-core - Fix revision handling in da9063 - Fix 'assignment of read-only location' error in kempld-core - Avoid using the Regmap API when atomic in rn5t618 - Redefine volatile register description in rn5t618 - Use locking to protect event handler in dln2" * tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: syscon: Use a unique name with regmap_config mfd: Replace HTTP links with HTTPS ones mfd: dln2: Run event handler loop under spinlock mfd: madera: Improve handling of regulator unbinding mfd: mfd-core: Add mechanism for removal of a subset of children mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8() mfd: max14577: Remove redundant initialization of variable current_bits mfd: rn5t618: Fix caching of battery related registers mfd: max77693-private: Drop a duplicated word mfd: da9055: pdata.h: Drop a duplicated word mfd: rn5t618: Make restart handler atomic safe mfd: kempld-core: Fix 'assignment of read-only location' error mfd: axp20x: Allow the AXP803 to be probed by I2C mfd: da9063: Add support for latest DA silicon revision mfd: da9063: Fix revision handling to correctly select reg tables dt-bindings: mfd: st,stmfx: Remove I2C unit name dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller mfd: motorola-cpcap: Disable interrupt for suspend mfd: smsc-ece1099: Remove driver mfd: core: Add OF_MFD_CELL_REG() helper ...
2020-08-04Merge tag 'timers-core-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Time, timers and related driver updates: - Prevent unnecessary timer softirq invocations by extending the tracking of the next expiring timer in the timer wheel beyond the existing NOHZ functionality. The tracking overhead at enqueue time is within the noise, but on sensitive workloads the avoidance of the soft interrupt invocation is a measurable improvement. - The obligatory new clocksource driver for Ingenic X100 OST - The usual fixes, improvements, cleanups and extensions for newer chip variants all over the driver space" * tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) timers: Recalculate next timer interrupt only when necessary clocksource/drivers/ingenic: Add support for the Ingenic X1000 OST. dt-bindings: timer: Add Ingenic X1000 OST bindings. clocksource/drivers: Replace HTTP links with HTTPS ones clocksource/drivers/nomadik-mtu: Handle 32kHz clock clocksource/drivers/sh_cmt: Use "kHz" for kilohertz clocksource/drivers/imx: Add support for i.MX TPM driver with ARM64 clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT. timers: Lower base clock forwarding threshold timers: Remove must_forward_clk timers: Spare timer softirq until next expiry timers: Expand clk forward logic beyond nohz timers: Reuse next expiry cache after nohz exit timers: Always keep track of next expiry timers: Optimize _next_timer_interrupt() level iteration timers: Add comments about calc_index() ceiling work timers: Move trigger_dyntick_cpu() to enqueue_timer() timers: Use only bucket expiry for base->next_expiry value timers: Preserve higher bits of expiration on index calculation clocksource/drivers/timer-atmel-tcb: Add sama5d2 support ...
2020-07-25Merge tag 'timers-urgent-2020-07-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull timer fix from Ingo Molnar: "Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's" * tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 09:20:27 +0000