summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)Author
2014-01-31clocksource: kona: Add basic use of external clockTim Kryger
When an clock is specified in the device tree, enable it and use it to determine the external clock frequency. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-23Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2014-01-23Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
2014-01-20Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: - ARM clocksource/clockevent improvements and fixes - generic timekeeping updates: TAI fixes/improvements, cleanups - Posix cpu timer cleanups and improvements - dynticks updates: full dynticks bugfixes, optimizations and cleanups * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) clocksource: Timer-sun5i: Switch to sched_clock_register() timekeeping: Remove comment that's mostly out of date rtc-cmos: Add an alarm disable quirk timekeeper: fix comment typo for tk_setup_internals() timekeeping: Fix missing timekeeping_update in suspend path timekeeping: Fix CLOCK_TAI timer/nanosleep delays tick/timekeeping: Call update_wall_time outside the jiffies lock timekeeping: Avoid possible deadlock from clock_was_set_delayed timekeeping: Fix potential lost pv notification of time change timekeeping: Fix lost updates to tai adjustment clocksource: sh_cmt: Add clk_prepare/unprepare support clocksource: bcm_kona_timer: Remove unused bcm_timer_ids clocksource: vt8500: Remove deprecated IRQF_DISABLED clocksource: tegra: Remove deprecated IRQF_DISABLED clocksource: misc drivers: Remove deprecated IRQF_DISABLED clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata() clocksource: sh_tmu: Remove unnecessary platform_set_drvdata() clocksource: armada-370-xp: Enable timer divider only when needed clocksource: clksrc-of: Warn if no clock sources are found clocksource: orion: Switch to sched_clock_register() ...
2014-01-19clocksource: Timer-sun5i: Switch to sched_clock_register()Stephen Boyd
The 32-bit sched_clock() interface supports 64 bits since 3.13-rc1. Upgrade to the 64-bit function to allow us to remove the 32-bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1389922686-6249-1-git-send-email-sboyd@codeaurora.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-14Merge branch 'clockevents/3.14' of ↵Ingo Molnar
git://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/clockevent updates from Daniel Lezcano: * Axel Lin removed an unused structure defining the ids for the bcm kona driver. * Ezequiel Garcia enabled the timer divider only when the 25MHz timer is not used for the armada 370 XP. * Jingoo Han removed a pointless platform data initialization for the sh_mtu and sh_mtu2. * Laurent Pinchart added the clk_prepare/clk_unprepare for sh_cmt. * Linus Walleij added a useful warning in clk_of when no clocks are found while the old behavior was to silently hang at boot time. * Maxime Ripard added the high speed timer drivers for the Allwinner SoCs (A10, A13, A20). He increased the rating, shared the irq across all available cpus and fixed the clockevent's irq initialization for the sun4i. * Michael Opdenacker removed the usage of the IRQF_DISABLED for the all the timers driver located in drivers/clocksource. * Stephen Boyd switched to sched_clock_register for the arm_global_timer, cadence_ttc, sun4i and orion timers. Conflicts: drivers/clocksource/clksrc-of.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-03Merge tag 'renesas-dt3-for-v3.14' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Third Round of Renesas ARM Based SoC DT Updates for v3.14 * r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs - Add SSI, QSPI and MSIOF clocks in device tree r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards - Remove reference DTS - Specify external clock frequency in DT - Sync non-reference DTS with referene DTS - Add clocks to DTS * r8a7740 (R-Mobile A1) based Armadillo board - Add gpio-keys device - Add PWM backlight enable GPIO - Add PWM backlight power supply * r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and r8a73a4 (SH-Mobile APE6) SoCs - Specify PFC interrupts in DT * tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits) ARM: shmobile: r8a7791: Add SSI clocks in device tree ARM: shmobile: r8a7790: Add SSI clocks in device tree ARM: shmobile: r8a7791: Add QSPI module clock in device tree ARM: shmobile: r8a7790: Add QSPI module clock in device tree ARM: shmobile: r8a7791: Add MSIOF clocks in device tree ARM: shmobile: r8a7790: Add MSIOF clocks in device tree ARM: shmobile: Remove Koelsch reference DTS ARM: shmobile: Remove Lager reference DTS ARM: shmobile: koelsch: Specify external clock frequency in DT ARM: shmobile: lager: Specify external clock frequency in DT ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS ARM: shmobile: Sync Lager DTS with Lager reference DTS ARM: shmobile: r8a7791: Add clocks ARM: shmobile: r8a7790: Reference clocks ARM: shmobile: r8a7790: Add clocks ARM: shmobile: armadillo: dts: Add gpio-keys device ARM: shmobile: sh73a0: Specify PFC interrupts in DT ARM: shmobile: r8a7740: Specify PFC interrupts in DT ARM: shmobile: r8a73a4: Specify PFC interrupts in DT ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-30clocksource: cadence_ttc: Fix mutex taken inside interrupt contextSoren Brinkmann
When the kernel is compiled with: CONFIG_HIGH_RES_TIMERS=no CONFIG_HZ_PERIODIC=yes CONFIG_DEBUG_ATOMIC_SLEEP=yes The following WARN appears: WARNING: CPU: 1 PID: 0 at linux/kernel/mutex.c:856 mutex_trylock+0x70/0x1fc() DEBUG_LOCKS_WARN_ON(in_interrupt()) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-xilinx-dirty #93 [<c0014a78>] (unwind_backtrace+0x0/0x11c) from [<c0011b6c>] (show_stack+0x10/0x14) [<c0011b6c>] (show_stack+0x10/0x14) from [<c039120c>] (dump_stack+0x7c/0xc0) [<c039120c>] (dump_stack+0x7c/0xc0) from [<c001fda4>] (warn_slowpath_common+0x60/0x84) [<c001fda4>] (warn_slowpath_common+0x60/0x84) from [<c001fe48>] (warn_slowpath_fmt+0x2c/0x3c) [<c001fe48>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0392658>] (mutex_trylock+0x70/0x1fc) [<c0392658>] (mutex_trylock+0x70/0x1fc) from [<c02dfc08>] (clk_prepare_lock+0xc/0xe4) [<c02dfc08>] (clk_prepare_lock+0xc/0xe4) from [<c02e099c>] (clk_get_rate+0xc/0x44) [<c02e099c>] (clk_get_rate+0xc/0x44) from [<c02d0394>] (ttc_set_mode+0x34/0x78) [<c02d0394>] (ttc_set_mode+0x34/0x78) from [<c005f794>] (clockevents_set_mode+0x28/0x5c) [<c005f794>] (clockevents_set_mode+0x28/0x5c) from [<c00607fc>] (tick_broadcast_on_off+0x190/0x1c0) [<c00607fc>] (tick_broadcast_on_off+0x190/0x1c0) from [<c005f168>] (clockevents_notify+0x58/0x1ac) [<c005f168>] (clockevents_notify+0x58/0x1ac) from [<c02b99dc>] (cpuidle_setup_broadcast_timer+0x20/0x24) [<c02b99dc>] (cpuidle_setup_broadcast_timer+0x20/0x24) from [<c006cd04>] (generic_smp_call_function_single_interrupt+0) [<c006cd04>] (generic_smp_call_function_single_interrupt+0xe0/0x130) from [<c00138c8>] (handle_IPI+0x88/0x118) [<c00138c8>] (handle_IPI+0x88/0x118) from [<c0008504>] (gic_handle_irq+0x58/0x60) [<c0008504>] (gic_handle_irq+0x58/0x60) from [<c0012644>] (__irq_svc+0x44/0x78) Exception stack(0xef099fa0 to 0xef099fe8) 9fa0: 00000001 ef092100 00000000 ef092100 ef098000 00000015 c0399f2c c0579d74 9fc0: 0000406a 413fc090 00000000 00000000 00000000 ef099fe8 c00666ec c000f46c 9fe0: 20000113 ffffffff [<c0012644>] (__irq_svc+0x44/0x78) from [<c000f46c>] (arch_cpu_idle+0x34/0x3c) [<c000f46c>] (arch_cpu_idle+0x34/0x3c) from [<c0053980>] (cpu_startup_entry+0xa8/0x10c) [<c0053980>] (cpu_startup_entry+0xa8/0x10c) from [<000085a4>] (0x85a4) We are in an interrupt context (IPI) and we are calling clk_get_rate in the set_mode function which in turn ends up by getting a mutex... Even if that does not hang, it is a potential kernel deadlock. It is not allowed to call clk_get_rate() from interrupt context. To avoid such calls the timer input frequency is stored in the driver's data struct which makes it accessible to the driver in any context. [dlezcano] completed the changelog with the WARN trace and added a more detailed description. Tested on zync zc702. Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-26Merge branch 'tegra/dma-reset-rework' into next/dtOlof Johansson
Bringing in the tegra dma/reset framework cleanup as a base for the DT changes. * tegra/dma-reset-rework: (320 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-22Merge tag 'samsung-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Samsung DT updates for v3.14 - Add support Octa Cores for exynos5420 : populate CPU node entries to 8 Cores : extend mct to support 8 local interrupts - Update dwmmc nodes for exynos5250 and exynos5420 : change status property of dwmmc nodes for exynos5250 : move dwmmc nodes from exynos5 to exynos5250 because it's different between exynos5250 and exynos5420 : rename mmc nodes from dwmmc for exynos5 SoCs : add dwmmc nodes for exynos5420 - Add G-Scaler nodes for exynos5420 - Add HS-i2c nodes in exynos5420 : High Speed I2C 7 channels (4 to 10) - Update sysreg binding and node name in exynos4 - Update min voltage on exynos5250-arndale - Move fifo-depth property from boards to exynos5250 SoC : because the fifo-depth property is SoC specific * tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Update Samsung sysreg binding document ARM: dts: Fix sysreg node name in exynos4.dtsi ARM: dts: Add hs-i2c nodes to exynos5420 ARM: dts: Update min voltage for vdd_arm on Arndale ARM: dts: populate cpu node entries to 8 cpus for exynos5420 clocksource: mct: extend mct to support 8 local interrupts for Exynos5420 ARM: dts: Add device nodes for GScaler blocks for exynos5420 ARM: dts: Add dwmmc DT nodes for exynos5420 SOC ARM: dts: rename mmc dts node for exynos5 series ARM: dts: Move fifo-depth property from exynos5250 board dts ARM: dts: change status property of dwmmc nodes for exynos5250 ARM: dts: Move dwmmc nodes from exynos5.dtsi to exynos5250.dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-19Merge tag 'v3.13-rc3' into dt3-baseSimon Horman
Linux 3.13-rc3 Conflicts: drivers/pinctrl/sh-pfc/pfc-r8a7740.c drivers/pinctrl/sh-pfc/pfc-sh7372.c
2013-12-18Merge branch 'clockevents/for-Simon-3.13-rc2' into clockevents/3.14Daniel Lezcano
* clocksource: sh_cmt: Add clk_prepare/unprepare support Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-18clocksource: sh_cmt: Add clk_prepare/unprepare supportLaurent Pinchart
Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-16clocksource: mct: extend mct to support 8 local interrupts for Exynos5420Chander Kashyap
Exynos5420 is octa-core SoC from Samsung. Hence extend exynos-mct clocksource driver to support 8 local interrupts. Also extend dts entries for 8 interrupts. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-13rename ARCH_BCM to ARCH_BCM_MOBILE (clocksource)Christian Daudt
Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: bcm_kona_timer: Remove unused bcm_timer_idsAxel Lin
bcm_timer_ids is no longer used after converting to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: vt8500: Remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch removes the use of the IRQF_DISABLED flag. It's a NOOP since 2.6.35 and it will be removed one day. [dlezcano] : slightly changed the changelog Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: tegra: Remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch removes the use of the IRQF_DISABLED flag. It's a NOOP since 2.6.35 and it will be removed one day. [dlezcano] : slightly changed the changelog Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: misc drivers: Remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch removes the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. [dlezcano] : slightly changed the changelog Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: armada-370-xp: Enable timer divider only when neededEzequiel Garcia
The current code sets the timer divider bits always. However, when the 25 MHz timer is enabled, this is not needed and has no effect. As this causes some confusion, rework the code so the divider is set only when needed, i.e. when the 25 MHz timer is not in use. Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: clksrc-of: Warn if no clock sources are foundLinus Walleij
Many platforms rely on clocksource_of_init() being implicitly called for registering clock sources and will get zero warnings if no working clock source is available. Let's print a critical error message if no clock source is found. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: orion: Switch to sched_clock_register()Stephen Boyd
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sun4i: Switch to sched_clock_register()Stephen Boyd
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. While we're here, mark the sched_clock function as notrace to prevent ftrace recursion crashes. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: cadence_ttc_timer: Switch to sched_clock_register()Stephen Boyd
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Soren Brinkmann <soren.brinkmann@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: arm_global_timer: Switch to sched_clock_register()Stephen Boyd
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. While we're here increase the number of bits that sched_clock can handle to 64 to make full use of the counter. Cc: Stuart Menefy <stuart.menefy@st.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: Add Allwinner SoCs HS timers driverMaxime Ripard
Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sun4i: Increase a bit the clock event and sources ratingMaxime Ripard
We want to keep this driver as the default provider of the clock events and source, yet some other driver might fit in the "desired" category of ratings. Hence, we need to increase a bit the rating so that we can have more flexibility in the ratings we choose. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11clocksource: sun4i: Change CPU mask to cpu_possible_maskMaxime Ripard
The interrupt for the timer is a shared processor interrupt, so any CPU found in the system can handle it. Switch to our cpumask to cpu_possible_mask instead of cpumask_of(0). Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2013-12-11clockevent: sun4i: Fill the irq field in the clockevent structureMaxime Ripard
The clock event structure irq field was not filled previously to the interrupt we're using. This was resulting in the timer not being used at all when using a configuration with SMP enabled on a system with several CPUs, and with the cpumask set to the cpu_possible_mask. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2013-12-10clocksource: dw_apb_timer_of: Fix support for dts binding "snps,dw-apb-timer"Dinh Nguyen
In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both "snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place of "snps,dw-apb-timer". But the driver also needs to be udpated in order to support this new binding "snps,dw-apb-timer". Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-10clocksource: dw_apb_timer_of: Fix read_sched_clockDinh Nguyen
The read_sched_clock should return the ~value because the clock is a countdown implementation. read_sched_clock() should be the same as __apbt_read_clocksource(). Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-10clocksource: sunxi: Stop timer from ticking before enabling interruptsMarc Zyngier
The sun4i timer can still be ticking when we enable the interrupt. If another timer is actually used (A7 architected timer, for example), odds are that the interrupt will eventually fire with the event_handler pointer being NULL. The obvious fix it to stop the timer before registering the interrupt. Observed and tested on sun7i (cubietruck). Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-10clocksource: clksrc-of: Do not drop unheld reference on device nodeThierry Reding
When booting a recent kernel on ARM with OF_DYNAMIC enabled, the kernel warns about the following: [ 0.000000] ERROR: Bad of_node_put() on /timer@50004600 [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc5-next-20131017-00077-gedfd827-dirty #406 [ 0.000000] [<c0015b68>] (unwind_backtrace+0x0/0xf4) from [<c00117e4>] (show_stack+0x10/0x14) [ 0.000000] [<c00117e4>] (show_stack+0x10/0x14) from [<c055f734>] (dump_stack+0x9c/0xc8) [ 0.000000] [<c055f734>] (dump_stack+0x9c/0xc8) from [<c03b47d4>] (of_node_release+0x90/0x9c) [ 0.000000] [<c03b47d4>] (of_node_release+0x90/0x9c) from [<c03b5084>] (of_find_matching_node_and_match+0x78/0xb4) [ 0.000000] [<c03b5084>] (of_find_matching_node_and_match+0x78/0xb4) from [<c07887c8>] (clocksource_of_init+0x60/0x70) [ 0.000000] [<c07887c8>] (clocksource_of_init+0x60/0x70) from [<c076e99c>] (start_kernel+0x1f4/0x33c) [ 0.000000] [<c076e99c>] (start_kernel+0x1f4/0x33c) from [<80008074>] (0x80008074) This is caused by clocksource_of_init() dropping a reference on the device node that it never took. The reference taken by the loop is implicitly dropped on subsequent iterations. See the implementation of and the comment on top of the of_find_matching_node_and_match() function for reference (no pun intended). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-10clocksource: armada-370-xp: Register sched_clock after the counter resetEzequiel Garcia
This commit registers the sched_clock _after_ the counter reset (instead of before). This removes the timestamp 'jump' in kernel log messages. Before this change: [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns [ 0.000000] Initializing Coherency fabric [ 0.000000] Aurora cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB [ 163.507447] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528) [ 163.521419] pid_max: default: 32768 minimum: 301 [ 163.526185] Mount-cache hash table entries: 512 [ 163.531095] CPU: Testing write buffer coherency: ok After this change: [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns [ 0.000000] Initializing Coherency fabric [ 0.000000] Aurora cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB [ 0.016849] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528) [ 0.030820] pid_max: default: 32768 minimum: 301 [ 0.035588] Mount-cache hash table entries: 512 [ 0.040500] CPU: Testing write buffer coherency: ok Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net>
2013-12-10clocksource: time-efm32: Select CLKSRC_MMIOAxel Lin
The time-efm32 driver uses the clocksource MMIO functions. Thus it needs to select CLKSRC_MMIO in Kconfig. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-11-26clksrc: delete nomadik MTU non-DT boot pathLinus Walleij
Both platforms using the MTU (Nomadik and Ux500) have now been converted to use device tree exclusively, thus let us delete this platform data header and make this driver a fully self-contained DT-only driver. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-21clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARMStephen Boyd
Pavel Machek reports that this config is exposed on x86 where the ARM architected timers aren't even present. Make it depend on the ARM architected timers being selected so that non-ARM builds aren't asked about it. Reported-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-20clocksource: sh_tmu: Add clk_prepare/unprepare supportLaurent Pinchart
Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-20clocksource: sh_tmu: Release clock when sh_tmu_register() failsLaurent Pinchart
Fix the probe error path to release the clock resource when the sh_tmu_register() call fails. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-20clocksource: sh_mtu2: Add clk_prepare/unprepare supportLaurent Pinchart
Prepare the clock at probe time, as there is no other appropriate place in the driver where we're allowed to sleep. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-20clocksource: sh_mtu2: Release clock when sh_mtu2_register() failsLaurent Pinchart
Fix the probe error path to release the clock resource when the sh_mtu2_register() call fails. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-10-22clocksource: sun4i: remove IRQF_DISABLEDMaxime Ripard
IRQF_DISABLED is a no-op nowadays, so we can safely remove it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-10-22clocksource: sun4i: Report the minimum tick that we can programMaxime Ripard
We need to wait for at least 2 clock cycles whenever we reprogram our clockevent timer. Report that the minimum number of ticks we can handle is 3 ticks, and remove 3 ticks to the interval programmed to reflect this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-10-22clocksource: sun4i: Select CLKSRC_MMIOMaxime Ripard
The Allwinner SoCs timer use the clocksource MMIO functions. We thus need to select them in Kconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-10-22clocksource: Provide timekeeping for efm32 SoCsUwe Kleine-König
An efm32 features 4 16-bit timers with a 10-bit prescaler. This driver provides clocksource and clock event device using one timer instance each. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-10-22clocksource: em_sti: convert to clk_prepare/unprepareShinya Kuribayashi
Add calls to clk_prepare and unprepare so that EMMA Mobile EV2 can migrate to the common clock framework. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-10-16clocksource: arch_timer: Do not register arch_sys_counter twiceThierry Reding
Commit: 65cd4f6 ("arch_timer: Move to generic sched_clock framework") added code to register the arch_sys_counter in arch_timer_register(), but it is already registered in arch_counter_register(). This results in the timer being added to the clocksource list twice, therefore causing an infinite loop in the list. Remove the duplicate registration and register the scheduler clock after the original registration instead. This fixes a hang during boot on Tegra114 (Cortex-A15). [ While I've only tested this on Tegra114, I suspect the same hang during boot happens for all processors that use this clock source. ] Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1381843911-31962-1-git-send-email-treding@nvidia.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-10Merge branch 'fortglx/3.13/time' of ↵Ingo Molnar
git://git.linaro.org/people/jstultz/linux into timers/core Pull more timekeeping items for v3.13 from John Stultz: * Small cleanup in the clocksource code. * Fix for rtc-pl031 to let it work with alarmtimers. * Move arm64 to using the generic sched_clock framework & resulting cleanup in the generic sched_clock code. Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 18:14:25 +0000