summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)Author
2020-02-21clocksource/drivers/fttmr010: Set interrupt and shutdownJoel Stanley
In preparation for supporting the ast2600, pass the shutdown and interrupt functions to the common init callback. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191107094218.13210-3-joel@jms.id.au
2020-02-21clocksource/drivers/fttmr010: Parametrise shutdownJoel Stanley
In preparation for supporting the ast2600 which uses a different method to clear bits in the control register, use a callback for performing the shutdown sequence. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191107094218.13210-2-joel@jms.id.au
2020-02-17ARM/arm64: vdso: Use common vdso clock mode storageThomas Gleixner
Convert ARM/ARM64 to the generic VDSO clock mode storage. This needs to happen in one go as they share the clocksource driver. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lkml.kernel.org/r/20200207124403.363235229@linutronix.de
2020-02-17mips: vdso: Use generic VDSO clock mode storageThomas Gleixner
Switch to the generic VDSO clock mode storage. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lkml.kernel.org/r/20200207124403.244684017@linutronix.de
2020-02-17x86/vdso: Move VDSO clocksource state tracking to callbackThomas Gleixner
All architectures which use the generic VDSO code have their own storage for the VDSO clock mode. That's pointless and just requires duplicate code. X86 abuses the function which retrieves the architecture specific clock mode storage to mark the clocksource as used in the VDSO. That's silly because this is invoked on every tick when the VDSO data is updated. Move this functionality to the clocksource::enable() callback so it gets invoked once when the clocksource is installed. This allows to make the clock mode storage generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> (Hyper-V parts) Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> (VDSO parts) Acked-by: Juergen Gross <jgross@suse.com> (Xen parts) Link: https://lkml.kernel.org/r/20200207124402.934519777@linutronix.de
2020-02-08Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...
2020-01-27Merge tag 'timers-core-2020-01-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timekeeping and timers departement provides: - Time namespace support: If a container migrates from one host to another then it expects that clocks based on MONOTONIC and BOOTTIME are not subject to disruption. Due to different boot time and non-suspended runtime these clocks can differ significantly on two hosts, in the worst case time goes backwards which is a violation of the POSIX requirements. The time namespace addresses this problem. It allows to set offsets for clock MONOTONIC and BOOTTIME once after creation and before tasks are associated with the namespace. These offsets are taken into account by timers and timekeeping including the VDSO. Offsets for wall clock based clocks (REALTIME/TAI) are not provided by this mechanism. While in theory possible, the overhead and code complexity would be immense and not justified by the esoteric potential use cases which were discussed at Plumbers '18. The overhead for tasks in the root namespace (ie where host time offsets = 0) is in the noise and great effort was made to ensure that especially in the VDSO. If time namespace is disabled in the kernel configuration the code is compiled out. Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature and kept on for more than a year addressing review comments, finding better solutions. A pleasant experience. - Overhaul of the alarmtimer device dependency handling to ensure that the init/suspend/resume ordering is correct. - A new clocksource/event driver for Microchip PIT64 - Suspend/resume support for the Hyper-V clocksource - The usual pile of fixes, updates and improvements mostly in the driver code" * tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n alarmtimer: Use wakeup source from alarmtimer platform device alarmtimer: Make alarmtimer platform device child of RTC device alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality hrtimer: Add missing sparse annotation for __run_timer() lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres() MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources clocksource/drivers/timer-microchip-pit64b: Fix sparse warning clocksource/drivers/exynos_mct: Rename Exynos to lowercase clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access clocksource/drivers/timer-ti-dm: Switch to platform_get_irq clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource clocksource/drivers/bcm2835_timer: Fix memory leak of timer clocksource/drivers/cadence-ttc: Use ttc driver as platform driver clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page ...
2020-01-16clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSCAndrea Parri
Change the Hyper-V clocksource ratings to 250, below the TSC clocksource rating of 300. In configurations where Hyper-V offers an InvariantTSC, the TSC is not marked "unstable", so the TSC clocksource is available and preferred. With the higher rating, it will be the default. On older hardware and Hyper-V versions, the TSC is marked "unstable", so no TSC clocksource is created and the selected Hyper-V clocksource will be the default. Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200109160650.16150-3-parri.andrea@gmail.com
2020-01-16clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksourcesAndrea Parri
hyperv_timer.c exports hyperv_cs, which is used by stimers and the timesync mechanism. However, the clocksource dependency is not needed: these mechanisms only depend on the partition reference counter (which can be read via a MSR or via the TSC Reference Page). Introduce the (function) pointer hv_read_reference_counter, as an embodiment of the partition reference counter read, and export it in place of the hyperv_cs pointer. The latter can be removed. This should clarify that there's no relationship between Hyper-V stimers & timesync and the Linux clocksource abstractions. No functional or semantic change. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200109160650.16150-2-parri.andrea@gmail.com
2020-01-16clocksource/drivers/timer-microchip-pit64b: Fix sparse warningClaudiu Beznea
Fix sparse warning: "warning: Using plain integer as NULL pointer" Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578304688-14882-1-git-send-email-claudiu.beznea@microchip.com
2020-01-16clocksource/drivers/exynos_mct: Rename Exynos to lowercaseKrzysztof Kozlowski
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200104152107.11407-12-krzk@kernel.org
2020-01-16clocksource/drivers/timer-ti-dm: Fix uninitialized pointer accessTony Lindgren
Clean-up commit 8c82723414d5 ("clocksource/drivers/timer-ti-dm: Switch to platform_get_irq") caused a regression where we now try to access uninitialized data for timer: drivers/clocksource/timer-ti-dm.c: In function 'omap_dm_timer_probe': drivers/clocksource/timer-ti-dm.c:798:13: warning: 'timer' may be used uninitialized in this function [-Wmaybe-uninitialized] On boot we now get: Unable to handle kernel NULL pointer dereference at virtual address 00000004 ... (omap_dm_timer_probe) from [<c061ac7c>] (platform_drv_probe+0x48/0x98) (platform_drv_probe) from [<c0618c04>] (really_probe+0x1dc/0x348) (really_probe) from [<c0618ef4>] (driver_probe_device+0x5c/0x160) Let's fix the issue by moving platform_get_irq to happen after timer has been allocated. Fixes: bc83caddf17b ("clocksource/drivers/timer-ti-dm: Switch to platform_get_irq") Cc: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200106203700.21009-1-tony@atomide.com
2020-01-16clocksource/drivers/timer-ti-dm: Switch to platform_get_irqYangtao Li
platform_get_resource(pdev, IORESOURCE_IRQ) is not recommended for requesting IRQ's resources, as they can be not ready yet. Using platform_get_irq() instead is preferred for getting IRQ even if it was not retrieved earlier. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191221173027.30716-5-tiny.windzz@gmail.com
2020-01-16clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resourceYangtao Li
Use devm_platform_ioremap_resource() to simplify code, which wraps 'platform_get_resource' and 'devm_ioremap_resource' in a single helper. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191221173027.30716-4-tiny.windzz@gmail.com
2020-01-16clocksource/drivers/em_sti: Fix variable declaration in em_sti_probeYangtao Li
'irq' and 'ret' are variables of the same type and there is no need to use two lines. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191221173027.30716-3-tiny.windzz@gmail.com
2020-01-16clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resourceYangtao Li
Use devm_platform_ioremap_resource() to simplify code, which wraps 'platform_get_resource' and 'devm_ioremap_resource' in a single helper. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191221173027.30716-2-tiny.windzz@gmail.com
2020-01-16clocksource/drivers/bcm2835_timer: Fix memory leak of timerColin Ian King
Currently when setup_irq fails the error exit path will leak the recently allocated timer structure. Originally the code would throw a panic but a later commit changed the behaviour to return via the err_iounmap path and hence we now have a memory leak. Fix this by adding a err_timer_free error path that kfree's timer. Addresses-Coverity: ("Resource Leak") Fixes: 524a7f08983d ("clocksource/drivers/bcm2835_timer: Convert init function to return error") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191219213246.34437-1-colin.king@canonical.com
2020-01-16clocksource/drivers/cadence-ttc: Use ttc driver as platform driverRajan Vaja
Currently TTC driver is TIMER_OF_DECLARE type driver. Because of that, TTC driver may be initialized before other clock drivers. If TTC driver is dependent on that clock driver then initialization of TTC driver will failed. So use TTC driver as platform driver instead of using TIMER_OF_DECLARE. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1573122988-18399-1-git-send-email-rajan.vaja@xilinx.com
2020-01-16clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B supportClaudiu Beznea
Add driver for Microchip PIT64B timer. Timer could be used in continuous mode or oneshot mode. The hardware has 2x32 bit registers for period emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to set the period value (compare value). TLSB and TMSB keeps the current value of the counter. After a compare the TLSB and TMSB register resets. The driver uses PIT64B timer for clocksource or clockevent. First requested timer would be registered as clockevent, second one would be registered as clocksource. Individual PIT64B hardware resources were used for clocksource and clockevent to be able to support high resolution timers with this hardware implementation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
2020-01-16clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc pageBoqun Feng
Currently, the reserved size for a tsc page is 4K, which is enough for communicating with hypervisor. However, in the case where we want to export the tsc page to userspace (e.g. for vDSO to read the clocksource), the tsc page should be at least PAGE_SIZE, otherwise, when PAGE_SIZE is larger than 4K, extra kernel data will be mapped into userspace, which means leaking kernel information. Therefore reserve PAGE_SIZE space for tsc_pg as a preparation for the vDSO support of ARM64 in the future. Also, while at it, replace all reference to tsc_pg with hv_get_tsc_page() since it should be the only interface to access tsc page. Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com> Cc: linux-hyperv@vger.kernel.org Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191126021723.4710-1-boqun.feng@gmail.com
2020-01-16clocksource: Fix Kconfig miscuesRandy Dunlap
Fix lots of typo, spelling, punctuation, and grammar miscues in drivers/clocksource/Kconfig. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/4deb42a9-82f2-72f9-891f-972a9a399f4f@infradead.org
2020-01-16clocksource: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191120134236.15959-1-krzk@kernel.org
2020-01-16clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernationDexuan Cui
This is needed for hibernation, e.g. when we resume the old kernel, we need to disable the "current" kernel's TSC page and then resume the old kernel's. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1574233946-48377-1-git-send-email-decui@microsoft.com
2020-01-13clocksource: davinci: only enable clockevents once tim34 is initializedBartosz Golaszewski
The DM365 platform has a strange quirk (only present when using ancient u-boot - mainline u-boot v2013.01 and later works fine) where if we enable the second half of the timer in periodic mode before we do its initialization - the time won't start flowing and we can't boot. When using more recent u-boot, we can enable the timer, then reinitialize it and all works fine. To work around this issue only enable clockevents once tim34 is initialized i.e. move clockevents_config_and_register() below tim34 initialization. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-04clocksource: riscv: add notrace to riscv_sched_clockZong Li
When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-03Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "The main changes in the timer code in this cycle were: - Clockevent updates: - timer-of framework cleanups. (Geert Uytterhoeven) - Use timer-of for the renesas-ostm and the device name to prevent name collision in case of multiple timers. (Geert Uytterhoeven) - Check if there is an error after calling of_clk_get in asm9260 (Chuhong Yuan) - ABI fix: Zero out high order bits of nanoseconds on compat syscalls. This got broken a year ago, with apparently no side effects so far. Since the kernel would use random data otherwise I don't think we'd have other options but to fix the bug, even if there was a side effect to applications (Dmitry Safonov) - Optimize ns_to_timespec64() on 32-bit systems: move away from div_s64_rem() which can be slow, to div_u64_rem() which is faster (Arnd Bergmann) - Annotate KCSAN-reported false positive data races in hrtimer_is_queued() users by moving timer->state handling over to the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses (Eric Dumazet) - Misc cleanups and small fixes" [ I undid the "ABI fix" and updated the comments instead. The reason there were apparently no side effects is that the fix was a no-op. The updated comment is to say _why_ it was a no-op. - Linus ] * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Zero the upper 32-bits in __kernel_timespec on 32-bit time: Rename tsk->real_start_time to ->start_boottime hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ time: Fix spelling mistake in comment time: Optimize ns_to_timespec64() hrtimer: Annotate lockless access to timer->state clocksource/drivers/asm9260: Add a check for of_clk_get clocksource/drivers/renesas-ostm: Use unique device name instead of ostm clocksource/drivers/renesas-ostm: Convert to timer_of clocksource/drivers/timer-of: Use unique device name instead of timer clocksource/drivers/timer-of: Convert last full_name to %pOF
2019-11-27Merge tag 'riscv/for-v5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: "New features: - SECCOMP support - nommu support - SBI-less system support - M-Mode support - TLB flush optimizations Other improvements: - Pass the complete RISC-V ISA string supported by the CPU cores to userspace, rather than redacting parts of it in the kernel - Add platform DMA IP block data to the HiFive Unleashed board DT file - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image compression formats, in line with other architectures Cleanups: - Remove unnecessary PTE_PARENT_SIZE macro - Standardize include guard naming across arch/riscv" * tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits) riscv: provide a flat image loader riscv: add nommu support riscv: clear the instruction cache and all registers when booting riscv: read the hart ID from mhartid on boot riscv: provide native clint access for M-mode riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00 riscv: add support for MMIO access to the timer registers riscv: implement remote sfence.i using IPIs riscv: cleanup the default power off implementation riscv: poison SBI calls for M-mode riscv: don't allow selecting SBI based drivers for M-mode RISC-V: Add multiple compression image format. riscv: clean up the macro format in each header file riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE riscv: abstract out CSR names for supervisor vs machine mode riscv: separate MMIO functions into their own header file riscv: enter WFI in default_power_off() if SBI does not shutdown RISC-V: Issue a tlb page flush if possible RISC-V: Issue a local tlbflush if possible. RISC-V: Do not invoke SBI call if cpumask is empty ...
2019-11-27Merge tag 'driver-core-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel). The big problem turned out to be a lack of dependency information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues" * tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits) tracing: Remove unnecessary DEBUG_FS dependency of: property: Add device link support for interrupt-parent, dmas and -gpio(s) debugfs: Fix !DEBUG_FS debugfs_create_automount of: property: Add device link support for "iommu-map" of: property: Fix the semantics of of_is_ancestor_of() i2c: of: Populate fwnode in of_i2c_get_board_info() drivers: base: Fix Kconfig indentation firmware_loader: Fix labels with comma for builtin firmware driver core: Allow device link operations inside sync_state() driver core: platform: Declare ret variable only once cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h> crypto: hisilicon: no need to check return value of debugfs_create functions driver core: platform: use the correct callback type for bus_find_device firmware_class: make firmware caching configurable driver core: Clarify documentation for fwnode_operations.add_links() mailbox: tegra: Fix superfluous IRQ error message net: caif: Fix debugfs on 64-bit platforms mac80211: Use debugfs_create_xul() helper media: c8sectpfe: no need to check return value of debugfs_create functions of: property: Add device link support for iommus, mboxes and io-channels ...
2019-11-26Merge branch 'x86-hyperv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 hyperv updates from Ingo Molnar: "Misc updates to the hyperv guest code: - Rework clockevents initialization to better support hibernation - Allow guests to enable InvariantTSC - Micro-optimize send_ipi_one" * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyperv: Initialize clockevents earlier in CPU onlining x86/hyperv: Allow guests to enable InvariantTSC x86/hyperv: Micro-optimize send_ipi_one()
2019-11-25Merge tag 'printk-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...
2019-11-25Merge branch 'timers/urgent' into timers/core, to pick up fixIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-15x86/hyperv: Initialize clockevents earlier in CPU onliningMichael Kelley
Hyper-V has historically initialized stimer-based clockevents late in the process of onlining a CPU because clockevents depend on stimer interrupts. In the original Hyper-V design, stimer interrupts generate a VMbus message, so the VMbus machinery must be running first, and VMbus can't be initialized until relatively late. On x86/64, LAPIC timer based clockevents are used during early initialization before VMbus and stimer-based clockevents are ready, and again during CPU offlining after the stimer clockevents have been shut down. Unfortunately, this design creates problems when offlining CPUs for hibernation or other purposes. stimer-based clockevents are shut down relatively early in the offlining process, so clockevents_unbind_device() must be used to fallback to the LAPIC-based clockevents for the remainder of the offlining process. Furthermore, the late initialization and early shutdown of stimer-based clockevents doesn't work well on ARM64 since there is no other timer like the LAPIC to fallback to. So CPU onlining and offlining doesn't work properly. Fix this by recognizing that stimer Direct Mode is the normal path for newer versions of Hyper-V on x86/64, and the only path on other architectures. With stimer Direct Mode, stimer interrupts don't require any VMbus machinery. stimer clockevents can be initialized and shut down consistent with how it is done for other clockevent devices. While the old VMbus-based stimer interrupts must still be supported for backward compatibility on x86, that mode of operation can be treated as legacy. So add a new Hyper-V stimer entry in the CPU hotplug state list, and use that new state when in Direct Mode. Update the Hyper-V clocksource driver to allocate and initialize stimer clockevents earlier during boot. Update Hyper-V initialization and the VMbus driver to use this new design. As a result, the LAPIC timer is no longer used during boot or CPU onlining/offlining and clockevents_unbind_device() is not called. But retain the old design as a legacy implementation for older versions of Hyper-V that don't support Direct Mode. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com
2019-11-13riscv: add support for MMIO access to the timer registersChristoph Hellwig
When running in M-mode we can't use the SBI to set the timer, and don't have access to the time CSR as that usually is emulated by M-mode. Instead provide code that directly accesses the MMIO for the timer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource [paul.walmsley@sifive.com: updated to apply; fixed checkpatch issue; timex.h now includes asm/mmio.h to resolve header file problems] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-05riscv: abstract out CSR names for supervisor vs machine modeChristoph Hellwig
Many of the privileged CSRs exist in a supervisor and machine version that are used very similarly. Provide versions of the CSR names and fields that map to either the S-mode or M-mode variant depending on a new CONFIG_RISCV_M_MODE kconfig symbol. Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com> and Paul Walmsley <paul.walmsley@sifive.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-04Merge tag 'timers-v5.6' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clockevent updates from Daniel Lezcano: - Some cleanups for the timer-of, use %p0F and the unique device name (Geert Uytterhoeven) - Use timer-of for the renesas-ostm and the device name to prevent name collision in case of multiple timers (Geert Uytterhoeven) - Check if there is an error after calling of_clk_get in asm9260 (Chuhong Yuan)
2019-11-04Merge tag 'timers-v5.4-rc6' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clockevent fixes from Daniel Lezcano: - Fix scary messages in sh_mtu2 by using platform_irq_count() helper function (Geert Uytterhoeven) - Fix double free when using timer-of in the mediatek timer driver (Fabien Parent)
2019-11-04clocksource/drivers/asm9260: Add a check for of_clk_getChuhong Yuan
asm9260_timer_init misses a check for of_clk_get. Add a check for it and print errors like other clocksource drivers. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016124330.22211-1-hslester96@gmail.com
2019-11-04clocksource/drivers/renesas-ostm: Use unique device name instead of ostmGeert Uytterhoeven
Currently all OSTM devices are called "ostm", also in kernel messages. As there can be multiple instances in an SoC, this can confuse the user. Hence construct a unique name from the DT node name, like is done for platform devices. On RSK+RZA1, the boot log changes like: -clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns +clocksource: timer@fcfec000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns -ostm: used for clocksource -ostm: used for clock events +/soc/timer@fcfec000: used for clocksource +/soc/timer@fcfec400: used for clock events ... -clocksource: Switched to clocksource ostm +clocksource: Switched to clocksource timer@fcfec000 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016144747.29538-5-geert+renesas@glider.be
2019-11-04clocksource/drivers/renesas-ostm: Convert to timer_ofGeert Uytterhoeven
Convert the Renesas OSTM driver to use the timer_of framework. This reduces the driver object size by 367 bytes (with gcc 7.4.0). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016144747.29538-4-geert+renesas@glider.be
2019-11-04clocksource/drivers/timer-of: Use unique device name instead of timerGeert Uytterhoeven
If a hardware-specific driver does not provide a name, the timer-of core falls back to device_node.name. Due to generic DT node naming policies, that name is almost always "timer", and thus doesn't identify the actual timer used. Fix this by using device_node.full_name instead, which includes the unit addrees. Example impact on /proc/timer_list: -Clock Event Device: timer +Clock Event Device: timer@fcfec400 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016144747.29538-3-geert+renesas@glider.be
2019-11-04clocksource/drivers/timer-of: Convert last full_name to %pOFGeert Uytterhoeven
Commit 469869d18a886e04 ("clocksource: Convert to using %pOF instead of full_name") converted all but the one just added before by commit 32f2fea6e77e64cd ("clocksource/drivers/timer-of: Handle of_irq_get_byname() result correctly"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016144747.29538-2-geert+renesas@glider.be
2019-10-27Merge 5.4-rc5 into driver-core-nextGreg Kroah-Hartman
We want the sysfs fix in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-18clocksource: samsung_pwm_timer: Use pr_warn instead of pr_warningKefeng Wang
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent <prefix>_warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-11-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek@suse.com: Fixed indentation] Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-18clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()Geert Uytterhoeven
As platform_get_irq_by_name() now prints an error when the interrupt does not exist, looping over possibly non-existing interrupts causes the printing of scary messages like: sh_mtu2 fcff0000.timer: IRQ tgi1a not found sh_mtu2 fcff0000.timer: IRQ tgi2a not found Fix this by using the platform_irq_count() helper, to avoid touching non-existent interrupts. Limit the returned number of interrupts to the maximum number of channels currently supported by the driver in a future-proof way, i.e. using ARRAY_SIZE() instead of a hardcoded number. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016143003.28561-1-geert+renesas@glider.be
2019-10-16clocksource/drivers/mediatek: Fix error handlingFabien Parent
When timer_of_init fails, it cleans up after itself by undoing everything it did during the initialization function. mtk_syst_init and mtk_gpt_init both call timer_of_cleanup if timer_of_init fails. timer_of_cleanup try to release the resource taken. Since these resources have already been cleaned up by timer_of_init, we end up getting a few warnings printed: [ 0.001935] WARNING: CPU: 0 PID: 0 at __clk_put+0xe8/0x128 [ 0.002650] Modules linked in: [ 0.003058] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.67+ #1 [ 0.003852] Hardware name: MediaTek MT8183 (DT) [ 0.004446] pstate: 20400085 (nzCv daIf +PAN -UAO) [ 0.005073] pc : __clk_put+0xe8/0x128 [ 0.005555] lr : clk_put+0xc/0x14 [ 0.005988] sp : ffffff80090b3ea0 [ 0.006422] x29: ffffff80090b3ea0 x28: 0000000040e20018 [ 0.007121] x27: ffffffc07bfff780 x26: 0000000000000001 [ 0.007819] x25: ffffff80090bda80 x24: ffffff8008ec5828 [ 0.008517] x23: ffffff80090bd000 x22: ffffff8008d8b2e8 [ 0.009216] x21: 0000000000000001 x20: fffffffffffffdfb [ 0.009914] x19: ffffff8009166180 x18: 00000000002bffa8 [ 0.010612] x17: ffffffc012996980 x16: 0000000000000000 [ 0.011311] x15: ffffffbf004a6800 x14: 3536343038393334 [ 0.012009] x13: 2079726576652073 x12: 7eb9c62c5c38f100 [ 0.012707] x11: ffffff80090b3ba0 x10: ffffff80090b3ba0 [ 0.013405] x9 : 0000000000000004 x8 : 0000000000000040 [ 0.014103] x7 : ffffffc079400270 x6 : 0000000000000000 [ 0.014801] x5 : ffffffc079400248 x4 : 0000000000000000 [ 0.015499] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.016197] x1 : ffffff80091661c0 x0 : fffffffffffffdfb [ 0.016896] Call trace: [ 0.017218] __clk_put+0xe8/0x128 [ 0.017654] clk_put+0xc/0x14 [ 0.018048] timer_of_cleanup+0x60/0x7c [ 0.018551] mtk_syst_init+0x8c/0x9c [ 0.019020] timer_probe+0x6c/0xe0 [ 0.019469] time_init+0x14/0x44 [ 0.019893] start_kernel+0x2d0/0x46c [ 0.020378] ---[ end trace 8c1efabea1267649 ]--- [ 0.020982] ------------[ cut here ]------------ [ 0.021586] Trying to vfree() nonexistent vm area ((____ptrval____)) [ 0.022427] WARNING: CPU: 0 PID: 0 at __vunmap+0xd0/0xd8 [ 0.023119] Modules linked in: [ 0.023524] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.67+ #1 [ 0.024498] Hardware name: MediaTek MT8183 (DT) [ 0.025091] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 0.025718] pc : __vunmap+0xd0/0xd8 [ 0.026176] lr : __vunmap+0xd0/0xd8 [ 0.026632] sp : ffffff80090b3e90 [ 0.027066] x29: ffffff80090b3e90 x28: 0000000040e20018 [ 0.027764] x27: ffffffc07bfff780 x26: 0000000000000001 [ 0.028462] x25: ffffff80090bda80 x24: ffffff8008ec5828 [ 0.029160] x23: ffffff80090bd000 x22: ffffff8008d8b2e8 [ 0.029858] x21: 0000000000000000 x20: 0000000000000000 [ 0.030556] x19: ffffff800800d000 x18: 00000000002bffa8 [ 0.031254] x17: 0000000000000000 x16: 0000000000000000 [ 0.031952] x15: ffffffbf004a6800 x14: 3536343038393334 [ 0.032651] x13: 2079726576652073 x12: 7eb9c62c5c38f100 [ 0.033349] x11: ffffff80090b3b40 x10: ffffff80090b3b40 [ 0.034047] x9 : 0000000000000005 x8 : 5f5f6c6176727470 [ 0.034745] x7 : 5f5f5f5f28282061 x6 : ffffff80091c86ef [ 0.035443] x5 : ffffff800852b690 x4 : 0000000000000000 [ 0.036141] x3 : 0000000000000002 x2 : 0000000000000002 [ 0.036839] x1 : 7eb9c62c5c38f100 x0 : 7eb9c62c5c38f100 [ 0.037536] Call trace: [ 0.037859] __vunmap+0xd0/0xd8 [ 0.038271] vunmap+0x24/0x30 [ 0.038664] __iounmap+0x2c/0x34 [ 0.039088] timer_of_cleanup+0x70/0x7c [ 0.039591] mtk_syst_init+0x8c/0x9c [ 0.040060] timer_probe+0x6c/0xe0 [ 0.040507] time_init+0x14/0x44 [ 0.040932] start_kernel+0x2d0/0x46c This commit remove the calls to timer_of_cleanup when timer_of_init fails since it is unnecessary and actually cause warnings to be printed. Fixes: a0858f937960 ("mediatek: Convert the driver to timer-of") Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/linux-arm-kernel/20190919191315.25190-1-fparent@baylibre.com/
2019-10-07sh: add the sh_ prefix to early platform symbolsBartosz Golaszewski
Old early platform device support is now sh-specific. Before moving on to implementing new early platform framework based on real platform devices, prefix all early platform symbols with 'sh_'. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07drivers: move the early platform device support to arch/shBartosz Golaszewski
SuperH is the only user of the current implementation of early platform device support. We want to introduce a more robust approach to early probing. As the first step - move all the current early platform code to arch/sh. In order not to export internal drivers/base functions to arch code for this temporary solution - copy the two needed routines for driver matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c. Also: call early_platform_cleanup() from subsys_initcall() so that it's called after all early devices are probed. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-02timer-of: don't use conditional expression with mixed 'void' typesLinus Torvalds
Randy Dunlap reports on the sparse list that sparse warns about this expression: of_irq->percpu ? free_percpu_irq(of_irq->irq, clkevt) : free_irq(of_irq->irq, clkevt); and honestly, sparse is correct to warn. The return type of free_percpu_irq() is 'void', while free_irq() returns a 'const void *' that is the devname argument passed in to the request_irq(). You can't mix a void type with a non-void types in a conditional expression according to the C standard. It so happens that gcc seems to accept it - and the resulting type of the expression is void - but there's really no reason for the kernel to have this kind of non-standard expression with no real upside. The natural way to write that expression is with an if-statement: if (of_irq->percpu) free_percpu_irq(of_irq->irq, clkevt); else free_irq(of_irq->irq, clkevt); which is more legible anyway. I'm not sure why that timer-of code seems to have this odd pattern. It does the same at allocation time, but at least there the types match, and it makes sense as an expression. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-22Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 07:21:57 +0000