summaryrefslogtreecommitdiff
path: root/drivers/clocksource/sh_cmt.c
AgeCommit message (Collapse)Author
2020-07-23clocksource/drivers/sh_cmt: Use "kHz" for kilohertzGeert Uytterhoeven
"K" stands for "kelvin". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200618080212.16560-1-geert+renesas@glider.be
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-10-07sh: add the sh_ prefix to early platform symbolsBartosz Golaszewski
Old early platform device support is now sh-specific. Before moving on to implementing new early platform framework based on real platform devices, prefix all early platform symbols with 'sh_'. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07drivers: move the early platform device support to arch/shBartosz Golaszewski
SuperH is the only user of the current implementation of early platform device support. We want to introduce a more robust approach to early probing. As the first step - move all the current early platform code to arch/sh. In order not to export internal drivers/base functions to arch code for this temporary solution - copy the two needed routines for driver matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c. Also: call early_platform_cleanup() from subsys_initcall() so that it's called after all early devices are probed. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-27clocksource/drivers/sh_cmt: Document "cmt-48" as deprecatedMagnus Damm
Update the CMT driver to mark "renesas,cmt-48" as deprecated. Instead of documenting a theoretical hardware device based on current software support level, define DT bindings top-down based on available data sheet information and make use of part numbers in the DT compat string. In case of the only in-tree users r8a7740 and sh73a0 the compat strings "renesas,r8a7740-cmt1" and "renesas,sh73a0-cmt1" may be used instead. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-08-27clocksource/drivers/sh_cmt: r8a7740 and sh73a0 SoC-specific matchMagnus Damm
Add SoC-specific matching for CMT1 on r8a7740 and sh73a0. This allows us to move away from the old DT bindings such as - "renesas,cmt-48-sh73a0" - "renesas,cmt-48-r8a7740" - "renesas,cmt-48" in favour for the now commonly used format "renesas,<soc>-<device>" Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-08-27clocksource: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03clocksource/drivers/sh_cmt: Add R-Car gen3 supportSergei Shtylyov
Add support for the R-Car gen3 CMT types 0/1 -- they seem to be the same CMT types 0/1 as in R-Car gen2 SoCs. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializerSergei Shtylyov
There's no good reason for the sh_cmt_of_table[] initializer to violate the 80-column limit, especially after the commit 8d50e9476bb4 ("clocksource/drivers/sh_cmt: Mark "renesas,cmt-48-gen2" deprecated") partially fixed it -- fix the R-Car gen2 related entries as well. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machinesSergei Shtylyov
The driver seems to abuse *unsigned long* not only for the (32-bit) register values but also for the 'sh_cmt_channel::total_cycles' which needs to always be 64-bit -- as a result, the clocksource's mask is needlessly clamped down to 32-bits on the 32-bit machines... Fixes: 19bdc9d061bc ("clocksource: sh_cmt clocksource support") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03clocksource/drivers/sh_cmt: Fixup for 64-bit machinesSergei Shtylyov
When trying to use CMT for clockevents on R-Car gen3 SoCs, I noticed that 'max_delta_ns' for the broadcast timer (CMT) was shown as 1000 in /proc/timer_list. It turned out that when calculating it, the driver did 1 << 32 (causing what I think was undefined behavior) resulting in a zero delta, later clamped to 1000 by cev_delta2ns(). The root cause turned out to be that the driver abused *unsigned long* for the CMT register values (which are 16/32-bit), so that the calculation of 'ch->max_match_value' in sh_cmt_setup_channel() used the wrong branch. Using more proper 'u32' instead fixed 'max_delta_ns' and even fixed the switching an active clocksource to CMT (which caused the system to turn non-interactive before). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03clocksource/drivers/sh_cmt: Convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-19clocksource/drivers/sh_cmt: Use of_device_get_match_data() helperGeert Uytterhoeven
Use the existing of_device_get_match_data() helper instead of open-coding its functionality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Remove unused "renesas, channels-mask" handlingGeert Uytterhoeven
The in-driver channel configuration in sh_cmt_info.channels_mask is now always set for all CMT devices instantiated from DT. Hence the "renesas,channels-mask" property is no longer checked, and its handling can be removed, cfr. commit 4e18111ff38f0664 ("devicetree: bindings: Remove deprecated properties"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Mark "renesas,cmt-48-gen2" deprecatedGeert Uytterhoeven
Document in the driver that "renesas,cmt-48-gen2" is deprecated, but still supported for backward compatibility with old DTBs, cfr. commit 4e18111ff38f0664 ("devicetree: bindings: Remove deprecated properties"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Remove support for "renesas,cmt-32*"Geert Uytterhoeven
Remove driver matching support for the unused "renesas,cmt-32" and "renesas,cmt-32-fast" compatible values, cfr. commit 203bb3479958c48a ("devicetree: bindings: Remove unused 32-bit CMT bindings"). As this removes the last user of SH_CMT_32BIT_FAST, all support for this variant is removed from the driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Support separate R-Car Gen2 CMT0/1Magnus Damm
Add support for the new R-Car Gen2 CMT0 and CMT1 bindings. Support for the old DT binding is still kept around, however devices using such binding will be treated as a low-feature CMT0 device. If users want to make use of CMT1-specific features then they need to update their DTBs. No special CMT1-specific features are however implemented by his patch, only DT bindings are redone as groundwork for future feature patches. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19clocksource/drivers/sh_cmt: Use 0x3f mask for SH_CMT_48BIT caseMagnus Damm
Always use 0x3f as channel mask for the SH_CMT_48BIT type of devices. Once this patch is applied the "renesas,channels-mask" property will be ignored by the driver for older devices matching SH_CMT_48BIT. In the future when all CMT types store channel mask in the driver then we will be able to deprecate and remove "renesas,channels-mask" from DTS. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-04-14clockevents/drivers/sh_cmt: Set ->min_delta_ticks and ->max_delta_ticksNicolai Stange
In preparation for making the clockevents core NTP correction aware, all clockevent device drivers must set ->min_delta_ticks and ->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a clockevent device's rate is going to change dynamically and thus, the ratio of ns to ticks ceases to stay invariant. Make the sh_cmt clockevent driver initialize these fields properly. This patch alone doesn't introduce any change in functionality as the clockevents core still looks exclusively at the (untouched) ->min_delta_ns and ->max_delta_ns. As soon as this has changed, a followup patch will purge the initialization of ->min_delta_ns and ->max_delta_ns from this driver. Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-03-23clocksource: sh_cmt: Compute rate before registration againNicolai Stange
With the upcoming NTP correction related rate adjustments to be implemented in the clockevents core, the latter needs to get informed about every rate change of a clockevent device made after its registration. Currently, sh_cmt violates this requirement in that it registers its clockevent device with a dummy rate and sets its final ->mult and ->shift values from its ->set_state_oneshot() and ->set_state_periodic() functions respectively. This patch moves the setting of the clockevent device's ->mult and ->shift values to before its registration. Note that there has been some back and forth regarding this question with respect to the clocksource also provided by this driver: commit f4d7c3565c16 ("clocksource: sh_cmt: compute mult and shift before registration") moves the rate determination from the clocksource's ->enable() function to before its registration. OTOH, the later commit 3593f5fe40a1 ("clocksource: sh_cmt: __clocksource_updatefreq_hz() update") basically reverts this, saying "Without this patch the old code uses clocksource_register() together with a hack that assumes a never changing clock rate." However, I checked all current sh_cmt users in arch/sh as well as in arch/arm/mach-shmobile carefully and right now, none of them changes any rate in any clock tree relevant to sh_cmt after their respective time_init(). Since all sh_cmt instances are created after time_init(), none of them should ever observe any clock rate changes. What's more, both, a clocksource as well as a clockevent device, can immediately get selected for use at their registration and thus, enabled at this point already. So it's probably safer to assume a "never changing clock rate" here. - Move the struct sh_cmt_channel's ->rate member to struct sh_cmt_device: it's a property of the underlying clock which is in turn specific to the sh_cmt_device. - Determine the ->rate value in sh_cmt_setup() at device probing rather than at first usage. - Set the clockevent device's ->mult and ->shift values right before its registration. - Although not strictly necessary for the upcoming clockevent core changes, set the clocksource's rate at its registration for consistency. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2015-10-15clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup()Alexey Klimov
Memory for cmt struct is allocated by kzalloc() in sh_cmt_setup. Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-09-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Rather large, but nothing exiting: - new range check for settimeofday() to prevent that boot time becomes negative. - fix for file time rounding - a few simplifications of the hrtimer code - fix for the proc/timerlist code so the output of clock realtime timers is accurate - more y2038 work - tree wide conversion of clockevent drivers to the new callbacks" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits) hrtimer: Handle failure of tick_init_highres() gracefully hrtimer: Unconfuse switch_hrtimer_base() a bit hrtimer: Simplify get_target_base() by returning current base hrtimer: Drop return code of hrtimer_switch_to_hres() time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64() time: Introduce current_kernel_time64() time: Introduce struct itimerspec64 time: Add the common weak version of update_persistent_clock() time: Always make sure wall_to_monotonic isn't positive time: Fix nanosecond file time rounding in timespec_trunc() timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers cris/time: Migrate to new 'set-state' interface kernel: broadcast-hrtimer: Migrate to new 'set-state' interface xtensa/time: Migrate to new 'set-state' interface unicore/time: Migrate to new 'set-state' interface um/time: Migrate to new 'set-state' interface sparc/time: Migrate to new 'set-state' interface sh/localtimer: Migrate to new 'set-state' interface score/time: Migrate to new 'set-state' interface s390/time: Migrate to new 'set-state' interface ...
2015-08-10clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48 platform_device_id entryGeert Uytterhoeven
Since the removal of the r8a7740 legacy SoC code in commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), all former users of the "sh-cmt-48-gen2" platform device name are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-10clockevents/drivers/sh_cmt: Migrate to new 'set-state' interfaceViresh Kumar
Migrate sh_cmt driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Magnus Damm <damm+renesas@opensource.se> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-08-10clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48-gen2 ↵Geert Uytterhoeven
platform_device_id entry Since commit 914d7d148411997c ("ARM: shmobile: r8a73a4: Remove legacy code"), all former users of the "sh-cmt-48-gen2" platform device name are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-10clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-32-fast ↵Geert Uytterhoeven
platform_device_id entry Since commit 59b89af1d5551c12 ("ARM: shmobile: sh7372: Remove Legacy C SoC code"), there are no more users left of the "sh-cmt-32-fast" platform device name. Hence remove the corresponding platform_device_id entry from the driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-08clockevents/drivers/sh_cmt: Only perform clocksource suspend/resume if enabledGeert Uytterhoeven
Currently the sh_cmt clocksource timer is disabled or enabled unconditionally on clocksource suspend resp. resume, even if a better clocksource is present (e.g. arch_sys_counter) and the sh_cmt clocksource is not enabled. As sh_cmt is a syscore device when its timer is enabled, this may lead to a genpd.prepared_count imbalance in the presence of PM Domains, which may cause a lock-up during reboot after s2ram. During suspend: - pm_genpd_prepare() is called for all non-syscore devices (incl. sh_cmt), increasing genpd.prepared_count for each device, - clocksource.suspend() is called for all clocksource devices, - sh_cmt_clocksource_suspend() calls sh_cmt_stop(), which is a no-op as the clocksource was not enabled. During resume: - clocksource.resume() is called for all clocksource devices, - sh_cmt_clocksource_resume() calls sh_cmt_start(), which enables the clocksource timer, and turns sh_cmt into a syscore device, - pm_genpd_complete() is called for all non-syscore devices (excl. sh_cmt now!), decreasing genpd.prepared_count for each device but sh_cmt. Now genpd.prepared_count of the PM Domain containing sh_cmt is still 1 instead of zero. On subsequent suspend/resume cycles, sh_cmt is still a syscore device, hence it's skipped for pm_genpd_{prepare,complete}(), keeping the imbalance of genpd.prepared_count at 1. During reboot: - platform_drv_shutdown() is called for any platform device that has a driver with a .shutdown() method (only rcar-dmac on R-Car Gen2), - platform_drv_shutdown() calls dev_pm_domain_detach(), which calls genpd_dev_pm_detach(), - genpd_dev_pm_detach() keeps calling pm_genpd_remove_device() until it doesn't return -EAGAIN[*], - If the device is part of the same PM Domain as sh_cmt, pm_genpd_remove_device() always fails with -EAGAIN due to genpd.prepared_count > 0. - Infinite loop in genpd_dev_pm_detach()[*]. [*] Commit 93af5e9354432828 ("PM / Domains: Avoid infinite loops in attach/detach code") already limited the number of loop iterations, avoiding the lock-up. To fix this, only disable or enable the clocksource timer on clocksource suspend resp. resume if the clocksource was enabled. This was tested on r8a7791/koelsch with the CPG Clock Domain: - using arch_sys_counter as the clocksource, which is the default, and which showed the problem, - using sh_cmt as a clocksource ("echo ffca0000.timer > \ /sys/devices/system/clocksource/clocksource0/current_clocksource"), which behaves the same as before. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438875126-12596-2-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13clocksource: Rename __clocksource_updatefreq_*() to ↵John Stultz
__clocksource_update_freq_*() Ingo requested this function be renamed to improve readability, so I've renamed __clocksource_updatefreq_scale() as well as the __clocksource_updatefreq_hz/khz() functions to avoid squishedtogethernames. This touches some of the sh clocksources, which I've not tested. The arch/arm/plat-omap change is just a comment change for consistency. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1426133800-29329-13-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-04clocksource: sh_cmt: Add DT supportLaurent Pinchart
Document DT bindings and parse them in the CMT driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-02clocksource: sh_cmt: Replace global spinlock with a per-device spinlockLaurent Pinchart
The global spinlock is used to protect the shared start/stop register. Now that all CMT channels are handled by a single device instance, use a per-device spinlock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-02clocksource: sh_cmt: Drop support for legacy platform dataLaurent Pinchart
Now that all platforms have switched to the new-style platform data, drop support for the legacy version. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-23clocksource: sh_cmt: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. [dlezcano] : refreshed against latest modifications: kmalloc -> kzalloc Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-16clocksource: sh_cmt: Request IRQ for clock event device onlyLaurent Pinchart
Clock sources don't need an IRQ, request the IRQ only for channels used as clock event devices. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Sort headers alphabeticallyLaurent Pinchart
This helps locating duplicates and inserting new headers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Remove FSF mail address from GPL noticeLaurent Pinchart
Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Rename clock to "fck" in the non-legacy caseLaurent Pinchart
The sh_cmt driver gets the CMT functional clock using a connection ID of "cmt_fck". While all SH SoCs create clock lookup entries with a NULL device ID and a "cmt_fck" connection ID, the ARM SoCs use the device ID only with a NULL connection ID. This works on legacy platforms but will break on ARM with DT boot. Fix the situation by using a connection ID of "fck" in the non-legacy platform data case. Clock lookup entries will be renamed to use the device ID as well as the connection ID as platforms get moved to new platform data. The legacy code will eventually be dropped, leaving us with device ID based clock lookup, compatible with DT boot. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Add support for multiple channels per deviceLaurent Pinchart
CMT hardware devices can support multiple channels, with global registers and per-channel registers. The sh_cmt driver currently models the hardware with one Linux device per channel. This model makes it difficult to handle global registers in a clean way. Add support for a new model that uses one Linux device per timer with multiple channels per device. This requires changes to platform data, add new channel configuration fields. Support for the legacy model is kept and will be removed after all platforms switch to the new model. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Hardcode CMT clock source rating to 125Laurent Pinchart
All boards use or should use a clock source rating of 125 for the CMT, hardcode it in the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Hardcode CMT clock event rating to 125Laurent Pinchart
All boards use or should use a clock event rating of 125 for the CMT, hardcode it in the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Set cpumask to cpu_possible_maskLaurent Pinchart
The CMT is a global timer not restricted to a single CPU. It has a lower rating than the TMU or ARM architected timer, but is still useful on systems where the other timers are stopped during CPU sleep. When multiple timers are available the timers core selects which timer to use based on timer ratings. On SMP systems where timer broadcasting is required, one dummy timer is instantiated per CPU with a rating of 100. On those systems the CMT timer has a rating of 80, which makes the dummy timer selected by default on all CPUs. The CMT is then available, and will be used as a broadcast timer. On UP systems no dummy timer is instantiated. The CMT timer has a rating of 125 on those systems and is used directly as a clock event device for CPU0 without broadcasting. The CMT rating shouldn't depend on whether we boot a UP or SMP system. We can't raise the CMT rating to 125 on SMP systems. This would select CMT as the clock event device for CPU0 as its rating is higher than the dummy timer rating, and would leave the system without a broadcast timer. We could instead lower the rating to 80 on all systems, but that wouldn't reflect reality as ratings between 1 and 99 are documented as "unfit for real use". We should raise the rating above 99 and still have the CMT selected as a broadcast timer. This can be done by changing the cpumask from cpumask_of(0) to cpu_possible_mask. In that case the timer selection logic will prefer the previously probed and already selected dummy timer for all CPUs based on the fact that already selected per-cpu timers are preferred over new global timers, regardless of their respective ratings. This also better reflects reality, as the CMT is not tied to the boot CPU. Ideally the timer selection logic should realize that the CMT needs to be used as a broadcast timer on SMP systems as no other broadcast timer is available, regardless of the cpumask and rating. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Replace hardcoded register values with macrosLaurent Pinchart
Define symbolic macros for all used registers bits. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Split static information from sh_cmt_deviceLaurent Pinchart
Create a new sh_cmt_info structure to hold static information about the device model and reference that structure from the sh_cmt_device structure. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Allocate channels dynamicallyLaurent Pinchart
This prepares the driver for multi-channel support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Replace kmalloc + memset with kzallocLaurent Pinchart
One kzalloc a day keeps the bugs away. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Add index to struct sh_cmt_channelLaurent Pinchart
Use the index when printing messages to identify the channel. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Add memory base to sh_cmt_channel structureLaurent Pinchart
The channel memory base is channel-specific, add it to the channel structure in preparation for support of multiple channels per device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Rename mapbase/mapbase_str to mapbase_ch/mapbaseLaurent Pinchart
The mapbase variable points to the mapped base address of the channel, rename it to mapbase_sh. mapbase_str points to the mapped base address of the CMT device, rename it to mapbase. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16clocksource: sh_cmt: Constify name argument to sh_cmt_register()Laurent Pinchart
The name argument is assigned to const structure fields only, constify it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 23:53:49 +0000