summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2018-04-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ...
2018-04-06Merge branch 'clk-davinci' into clk-nextStephen Boyd
* clk-davinci: clk: davinci: add a reset lookup table for psc0 reset: modify the way reset lookup works for board files reset: add support for non-DT systems
2018-04-06clk: davinci: add a reset lookup table for psc0Bartosz Golaszewski
In order to be able to use the reset framework in legacy boot mode as well, add the reset lookup table to the psc driver for da850 variant. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06Merge branches 'clk-stratix10', 'clk-imx', 'clk-bcm', 'clk-cs2000' and ↵Stephen Boyd
'clk-imx6sll' into clk-next * clk-stratix10: clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 * clk-imx: clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: imx: pllv2: avoid using uninitialized values clk: imx6ull: Add epdc_podf instead of sim_podf clk: imx: imx7d: correct video pll clock tree clk: imx: imx7d: add the Keypad Port module clock clk: imx7d: add CAAM clock clk: imx: imx7d: add the snvs clock clk: imx: imx6sx: update cko mux options * clk-bcm: clk: bcm2835: De-assert/assert PLL reset signal when appropriate * clk-cs2000: clk: cs2000: set pm_ops in hibernate-compatible way * clk-imx6sll: clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
2018-04-06Merge branches 'clk-davinci', 'clk-si544', 'clk-rockchip', 'clk-uniphier' ↵Stephen Boyd
and 'clk-ti-flag-fix' into clk-next * clk-davinci: clk: davinci: Remove redundant dev_err calls clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks clk: davinci: New driver for TI DA8XX CFGCHIP clocks dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks clk: davinci: Add platform information for TI DM646x PSC clk: davinci: Add platform information for TI DM644x PSC clk: davinci: Add platform information for TI DM365 PSC clk: davinci: Add platform information for TI DM355 PSC clk: davinci: Add platform information for TI DA850 PSC clk: davinci: Add platform information for TI DA830 PSC clk: davinci: New driver for davinci PSC clocks dt-bindings: clock: New bindings for TI Davinci PSC clk: davinci: Add platform information for TI DM646x PLL clk: davinci: Add platform information for TI DM644x PLL clk: davinci: Add platform information for TI DM365 PLL clk: davinci: Add platform information for TI DM355 PLL clk: davinci: Add platform information for TI DA850 PLL clk: davinci: Add platform information for TI DA830 PLL clk: davinci: New driver for davinci PLL clocks dt-bindings: clock: Add new bindings for TI Davinci PLL clocks * clk-si544: clk: Add driver for the si544 clock generator chip * clk-rockchip: clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399 clk: rockchip: Fix error return in phase clock registration clk: rockchip: Correct the behaviour of restoring cached phase clk: rockchip: Fix wrong parents for MMC phase clock for rk3328 clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 clk: rockchip: Add 1.6GHz PLL rate for rk3399 clk: rockchip: Restore the clock phase after the rate was changed clk: rockchip: Prevent calculating mmc phase if clock rate is zero clk: rockchip: Free the memory on the error path clk: rockchip: document hdmi_phy external input for rk3328 clk: rockchip: add flags for rk3328 dclk_lcdc clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks clk: rockchip: protect all remaining rk3328 interconnect clocks clk: rockchip: export sclk_hdmi_sfc on rk3328 clk: rockchip: remove HCLK_VIO from rk3328 dt header clk: rockchip: fix hclk_vio_niu on rk3328 * clk-uniphier: clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: uniphier: add ethernet clock control support for PXs3 clk: uniphier: add Pro4/Pro5/PXs2 audio system clock * clk-ti-flag-fix: clk: ti: fix flag space conflict with clkctrl clocks clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
2018-04-06Merge branches 'clk-mediatek', 'clk-hisi', 'clk-allwinner', 'clk-ux500' and ↵Stephen Boyd
'clk-renesas' into clk-next * clk-mediatek: clk: mediatek: add audsys support for MT2701 clk: mediatek: add devm_of_platform_populate() for MT7622 audsys dt-bindings: clock: mediatek: add audsys support for MT2701 dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device clk: mediatek: update missing clock data for MT7622 audsys clk: mediatek: fix PWM clock source by adding a fixed-factor clock dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4 * clk-hisi: clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc() clk: hisilicon: mark wdt_mux_p[] as const clk: hisilicon: Mark phase_ops static clk: hi3798cv200: add emmc sample and drive clock clk: hisilicon: add hisi phase clock support clk: hi3798cv200: add COMBPHY0 clock support clk: hi3798cv200: fix define indentation clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK clk: hi3798cv200: correct IR clock parent clk: hi3798cv200: fix unregister call sequence in error path * clk-allwinner: clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU clk: sunxi-ng: add support for the Allwinner H6 CCU dt-bindings: add device tree binding for Allwinner H6 main CCU clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate clk: sunxi-ng: h3: h5: Add minimal rate for video PLL clk: sunxi-ng: Add check for minimal rate to NM PLLs clk: sunxi-ng: Use u64 for calculation of nkmp rate clk: sunxi-ng: Mask nkmp factors when setting register clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name * clk-ux500: clk: ux500: Drop AB8540/9540 support * clk-renesas: (27 commits) clk: renesas: cpg-mssr: Adjust r8a77980 ifdef clk: renesas: rcar-gen3: Always use readl()/writel() clk: renesas: sh73a0: Always use readl()/writel() clk: renesas: rza1: Always use readl()/writel() clk: renesas: rcar-gen2: Always use readl()/writel() clk: renesas: r8a7740: Always use readl()/writel() clk: renesas: r8a73a4: Always use readl()/writel() clk: renesas: mstp: Always use readl()/writel() clk: renesas: div6: Always use readl()/writel() clk: fix false-positive Wmaybe-uninitialized warning clk: renesas: r8a77965: Replace DU2 clock clk: renesas: cpg-mssr: Add support for R-Car M3-N clk: renesas: cpg-mssr: add R8A77980 support dt-bindings: clock: add R8A77980 CPG core clock definitions clk: renesas: r8a7792: Add rwdt clock clk: renesas: r8a7794: Add rwdt clock clk: renesas: r8a7791/r8a7793: Add rwdt clock clk: renesas: r8a7790: Add rwdt clock clk: renesas: r8a7745: Add rwdt clock clk: renesas: r8a7743: Add rwdt clock ...
2018-04-06Merge branches 'clk-mvebu', 'clk-phase', 'clk-nxp', 'clk-mtk2712' and ↵Stephen Boyd
'clk-qcom-rpmcc' into clk-next * clk-mvebu: clk: mvebu: armada-38x: add support for missing clocks clk: mvebu: cp110: Fix clock tree representation * clk-phase: clk: Don't show the incorrect clock phase clk: update cached phase to respect the fact when setting phase * clk-nxp: clk: lpc32xx: Set name of regmap_config * clk-mtk2712: clk: mediatek: update clock driver of MT2712 dt-bindings: clock: add clocks for MT2712 * clk-qcom-rpmcc: clk: qcom: rpmcc: Add support to XO buffered clocks
2018-04-06Merge branches 'clk-spreadtrum', 'clk-stm32f', 'clk-stm32mp1', 'clk-hi655x' ↵Stephen Boyd
and 'clk-gpio' into clk-next * clk-spreadtrum: clk: sprd: add RTC gate for SC9860 dt-bindings: clocks: add APB RTC gate for SC9860 * clk-stm32f: clk: stm32: Add clk entry for SDMMC2 on stm32F769 clk: stm32: Add DSI clock for STM32F469 Board clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK * clk-stm32mp1: clk: stm32: add configuration flags for each of the stm32 drivers clk: stm32mp1: add Debug clocks clk: stm32mp1: add MCO clocks clk: stm32mp1: add RTC clock clk: stm32mp1: add Peripheral & Kernel Clocks clk: stm32mp1: add Kernel timers clk: stm32mp1: add Sub System clocks clk: stm32mp1: add Post-dividers for PLL clk: stm32mp1: add PLL clocks clk: stm32mp1: add Source Clocks for PLLs clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators clk: stm32mp1: Introduce STM32MP1 clock driver dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings * clk-hi655x: clk: enable hi655x common clk automatically * clk-gpio: clk: clk-gpio: Allow GPIO to sleep in set/get_parent
2018-04-06Merge branches 'clk-versatile', 'clk-doc', 'clk-must-check', 'clk-qcom' and ↵Stephen Boyd
'clk-debugfs' into clk-next * clk-versatile: clk: versatile: Remove WARNs in ->round_rate() clk: versatile: add min/max rate boundaries for vexpress osc clock * clk-doc: Documentation: clk: enable lock is not held for clk_is_enabled API * clk-must-check: clk: add more __must_check for bulk APIs * clk-qcom: clk: qcom: smd-rpm: Migrate to devm_of_clk_add_hw_provider() clk: qcom: gcc-msm8996: Mark aggre0 noc clks as critical * clk-debugfs: clk: Re-use DEFINE_SHOW_ATTRIBUTE() macro
2018-04-06Merge branches 'clk-ti', 'clk-amlogic', 'clk-tegra' and 'clk-samsung' into ↵Stephen Boyd
clk-next * clk-ti: clk: keystone: sci-clk: add support for dynamically probing clocks clk: ti: add support for clock latching to mux clocks clk: ti: add support for clock latching to divider clocks clk: ti: add generic support for clock latching clk: ti: add support for register read-modify-write low-level operation dt-bindings: clock: ti: add latching support to mux and divider clocks * clk-amlogic: (50 commits) clk: meson: Drop unused local variable and add static clk: meson: clean-up clk81 clocks clk: meson: add fdiv clock gates clk: meson: add mpll pre-divider clk: meson: axg: add hifi pll clock clk: meson: axg: add hifi clock bindings clk: meson: add ROUND_CLOSEST to the pll driver clk: meson: add gp0 frac parameter for axg and gxl clk: meson: improve pll driver results with frac clk: meson: remove special gp0 lock loop clk: meson: poke pll CNTL last clk: meson: add fractional part of meson8b fixed_pll clk: meson: use hhi syscon if available clk: meson: remove obsolete cpu_clk clk: meson: rework meson8b cpu clock clk: meson: split divider and gate part of mpll clk: meson: migrate plls clocks to clk_regmap clk: meson: migrate the audio divider clock to clk_regmap clk: meson: migrate mplls clocks to clk_regmap clk: meson: add regmap helpers for parm ... * clk-tegra: clk: tegra: Fix pll_u rate configuration clk: tegra: Specify VDE clock rate clk: tegra20: Correct PLL_C_OUT1 setup clk: tegra: Mark HCLK, SCLK and EMC as critical clk: tegra: MBIST work around for Tegra210 clk: tegra: add fence_delay for clock registers clk: tegra: Add la clock for Tegra210 * clk-samsung: (22 commits) clk: samsung: Mark a few things static clk: samsung: Add fout=196608001 Hz EPLL rate entry for exynos4412 clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU devices clk: samsung: exynos5420: Add more entries to EPLL rate table clk: samsung: exynos5420: Add CLK_SET_RATE_PARENT flag to mout_mau_epll_clk clk: samsung: exynos5250: Move PD-dependent clocks to Exynos5 sub-CMU clk: samsung: exynos5420: Move PD-dependent clocks to Exynos5 sub-CMU clk: samsung: Add Exynos5 sub-CMU clock driver soc: samsung: pm_domains: Add blacklisting clock handling clk: samsung: Add compile time PLL rate validators clk: samsung: s3c2410: Fix PLL rates clk: samsung: exynos7: Fix PLL rates clk: samsung: exynos5433: Fix PLL rates clk: samsung: exynos5260: Fix PLL rates clk: samsung: exynos5250: Fix PLL rates clk: samsung: exynos3250: Fix PLL rates clk: exynos5433: Extend list of available AUD_PLL output frequencies clk: exynos5433: Add CLK_IGNORE_UNUSED flag to sclk_ioclk_i2s1_bclk clk: samsung: Add a git tree entry to MAINTAINERS clk: samsung: Remove redundant dev_err call in exynos_audss_clk_probe() ...
2018-04-06clk: imx: add clock driver for imx6sllBai Ping
Add clk driver support for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: imx: add new gate/gate2 wrapper funtionBai Ping
Add new gate/gate2 wrapper function to register clocks with optional flags. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy muxBai Ping
The busy divider and busy mux is actually used by the system critical clocks, so add 'CLK_IS_CRITICAL' to clocks registered with these two type. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: cs2000: set pm_ops in hibernate-compatible wayNikita Yushchenko
Use SET_LATE_SYSTEM_SLEEP_PM_OPS() macro instead of direct assignment to .resume_early field. This fixes initialization of CS2000 in restore from hibernation in case of kernel used to load image did not initialize CS2000 while kernel being restored had CS2000 initialized. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: bcm2835: De-assert/assert PLL reset signal when appropriateBoris Brezillon
In order to enable a PLL, not only the PLL has to be powered up and locked, but you also have to de-assert the reset signal. The last part was missing. Add it so PLLs that were not enabled by the FW/bootloader can be enabled from Linux. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: imx7d: Move clks_init_on before any clock operationsDong Aisheng
For init on clocks we should move it at the first place in imx7d_clocks_init() before any clock operations, else the clock operation may fail in case the clock is still not on. Acked-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com> Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: imx7d: Correct ahb clk parent selectAnson Huang
Design team change the ahb's clk parent options but did NOT update the DOC accordingly in time, so the AHB/IPG's clk rate in clk tree is incorrect, AHB is 67.5MHz and IPG is 33.75MHz, but using scope to monitor them, they are actually 135MHz and 67.5MHz, update the clk parent option to make clk tree info correct. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: imx7d: Correct dram pll typeAnson Huang
DRAM PLL is a audio/video type PLL, need to correct it to get correct ops of PLL. There is a test_div placed before DRAM PLL's gate, so add this test div clk. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: imx7d: Add USB clock informationPeter Chen
Add USB clock information, the pll_usb_main_clk is USB_PLL at CCM which is the output of USBOTG2 PHY. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: socfpga: stratix10: add clock driver for Stratix10 platformDinh Nguyen
Add a clock driver for the Stratix10 SoC. The driver is similar to the Cyclone5/Arria10 platforms, with the exception that this driver only uses one single clock binding. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable amlogic: meson-gx-socinfo: Update soc ids soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings cpufreq: scmi: add thermal dependency soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC ...
2018-04-05Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "This is the usual set of changes for device trees, with over 700 non-merged changesets. There is an ongoing set of dtc warning fixes and the usual bugfixes, cleanups and added device support. The most interesting bit as usual is support for new machines listed below: - The Allwinner H6 makes its debut with the Pine-H64 board, and we get two new machines based on its older siblings: the H5 based OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side, we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2 Zero development board (based on H2). - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972 development board and p2888 CPU module. - The Nuvoton npcm750 is a BMC that was newly added, for now we only support running on the evaluation board. - STmicroelectronics stm32 gains support for the stm32mp157c and two evaluation boards. - The Toradex Colibri board family grows a few members based on the i.MX6ULL variant. - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family of chips. - The Phytec phyBOARD Mira is a family of industrial boards based on i.MX6. For now, four models get added. - TI am335x based PDU-001 is an industrial embedded machine used for traffic monitoring - The Aspeed platform now supports running on the BMC on the Qualcomm Centriq 2400 server - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm msm8974 based Galaxy S5 is a rather different phone made by the same company. - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file for the various boards made by Xilinx themselves, as well as the Digilent Zybo Z7. - The ARM Versatile family now supports the "IB2" interface board. - The Renesas H2 based "Stout" and the H3 based Salvator-X are more evaluation boards named after a kind of beer, as most of them are. The r8a77980 (V3H) based "Condor" apparently doesn't follow that tradition. ;-) - ROC-RK3328-CC is a simple developement board from the Libre Computer Project, based on the Rockchips RK3328 SoC - Haiku is another development board plus Qseven module based on Rockchips RK3368 and made by Theobroma Systems" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits) arm: dts: modify Nuvoton NPCM7xx device tree structure arm: dts: modify Makefile NPCM750 configuration name arm: dts: modify clock binding in NPCM750 device tree arm: dts: modify timer register size in NPCM750 device tree arm: dts: modify UART compatible name in NPCM750 device tree arm: dts: add watchdog device to NPCM750 device tree arm64: dts: uniphier: add ethernet node for PXs3 ARM: dts: uniphier: add pinctrl groups of ethernet for second instance arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+ arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0 arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier arm: dts: armada-385-db-ap: use SPDX-License-Identifier arm: dts: armada-388-rd: use SPDX-License-Identifier arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier arm: dts: armada-370-db: use SPDX-License-Identifier arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs ...
2018-04-05clk: ti: fix flag space conflict with clkctrl clocksTero Kristo
The introduction of support for CLK_SET_RATE_PARENT flag for clkctrl clocks used a generic clock flag, which causes a conflict with the rest of the clkctrl flags, namely the NO_IDLEST flag. This can cause boot failures on certain platforms where this flag is introduced, by omitting the wait for the clockctrl module to be fully enabled before proceeding with rest of the code. Fix this by moving all the clkctrl specific flags to their own bit-range. Signed-off-by: Tero Kristo <t-kristo@ti.com> Fixes: 49159a9dc3da ("clk: ti: add support for CLK_SET_RATE_PARENT flag") Reported-by: Christophe Lyon <christophe.lyon@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05clk: uniphier: add additional ethernet clock lines for Pro4Kunihiko Hayashi
Pro4 SoC has clock lines for Giga-bit feature and ethernet phy, and these are mandatory to activate the ethernet controller. This adds support for the clock lines. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05clk: uniphier: add SATA clock control supportKunihiko Hayashi
Add clock control for SATA controller on UniPhier SoCs. This adds support for PXs2, LD20 and PXs3. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05clk: uniphier: add PCIe clock control supportKunihiko Hayashi
Add clock control for PCIe controller on UniPhier SoCs. This adds support for Pro5, LD20 and PXs3. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23clk: Add driver for the si544 clock generator chipMike Looijmans
This patch adds the driver and devicetree documentation for the Silicon Labs SI544 clock generator chip. This is an I2C controlled oscillator capable of generating clock signals ranging from 200kHz to 1500MHz. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [sboyd: assign max_freq to 0 in is_valid_frequency() to squelch warning] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23clk: davinci: Remove redundant dev_err callsWei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23Merge tag 'clk-renesas-for-v4.17-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Fix the incorrect display clock on R-Car M3-N, - Always use readl()/writel(), - Small fixes. * tag 'clk-renesas-for-v4.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: cpg-mssr: Adjust r8a77980 ifdef clk: renesas: rcar-gen3: Always use readl()/writel() clk: renesas: sh73a0: Always use readl()/writel() clk: renesas: rza1: Always use readl()/writel() clk: renesas: rcar-gen2: Always use readl()/writel() clk: renesas: r8a7740: Always use readl()/writel() clk: renesas: r8a73a4: Always use readl()/writel() clk: renesas: mstp: Always use readl()/writel() clk: renesas: div6: Always use readl()/writel() clk: renesas: r8a77965: Replace DU2 clock
2018-03-23clk: uniphier: add ethernet clock control support for PXs3Kunihiko Hayashi
Add clock control for ethernet controller on PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23clk: ux500: Drop AB8540/9540 supportLinus Walleij
The AB8540 was an evolved version of the AB8500, but it was never mass produced or put into products, only reference designs exist. The upstream support was never completed and it is unlikely that this will happen so drop the support for now to simplify maintenance of the AB8500. Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399Lin Huang
Since hclk_sd and pclk_ddr source clock from CPLL or GPLL, and these two PLL may change their frequency. If we do not assign right id to pclk_ddr and hclk_sd, they will alway use default cur register value, and may get the frequency exceed their signed off frequency. So assign correct Id for them, then we can assign frequency for them in dts. Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23clk: rockchip: Fix error return in phase clock registrationShawn Lin
The newly added clock notifier may return an error code but so far the error output in the function would only return an error pointer from registering the clock. So when the clock notifier fails the clock would be unregistered but the return would still be the clock pointer which could then not be dereferenced correctly. So fix the error handling to prevent that. Fixes: 60cf09e45fbc ("clk: rockchip: Restore the clock phase after the rate was changed") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23clk: rockchip: Correct the behaviour of restoring cached phaseShawn Lin
We can't restore every phase, for instance the invalid phase and the phase for coming rate which is out of the scope of boards' ability. And this patch also corrects the error path to return invalid pointer to clk if clk_notifier_register failed introduced by the same offending commit. Fixes: 60cf09e45fbc ("clk: rockchip: Restore the clock phase after the rate was changed") Reported-by: wlq <wlq@rock-chips.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: wlq <wlq@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23clk: rockchip: Fix wrong parents for MMC phase clock for rk3328Shawn Lin
commit c420c1e4db22 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero") catches some gremlins for clk-rk3328.c that the parents of MMC phase clock should be clk_{sdmmc, sdio, emmc}, but not sclk_{sdmmc, sdio, emmc}. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228Shawn Lin
commit c420c1e4db22 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero") catches one gremlin again for clk-rk3228.c that the parent of SDMMC phase clock should be sclk_sdmmc0, but not sclk_sdmmc. However, the naming of the sdmmc clocks varies in the manual with the card clock having the 0 while the hclk is named without appended 0. So standardize one one format to prevent confusion, as there also is only one (non-sdio) mmc controller on the soc. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-21clk: renesas: cpg-mssr: Adjust r8a77980 ifdefMagnus Damm
Adjust the R8A77980-specific #ifdefs to use CLK instead of ARCH to follow same style as other SoCs. Fixes: ce15783c510a9905 ("clk: renesas: cpg-mssr: add R8A77980 support") Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-03-21clk: renesas: rcar-gen3: Always use readl()/writel()Geert Uytterhoeven
The R-Car Gen3 CPG/MSSR driver (again) uses a mix of clk_readl()/clk_writel() and readl()/writel() to access the clock registers. Settle on the generic readl()/writel(). Cfr. commit 30ad3cf00e94f4a7 ("clk: renesas: rcar-gen3-cpg: Always use readl()/writel()"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21clk: renesas: sh73a0: Always use readl()/writel()Geert Uytterhoeven
On arm32, there is no reason to use the (soon deprecated) clk_readl()/clk_writel(). Hence use the generic readl()/writel() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21clk: renesas: rza1: Always use readl()/writel()Geert Uytterhoeven
On arm32, there is no reason to use the (soon deprecated) clk_readl()/clk_writel(). Hence use the generic readl()/writel() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21clk: renesas: rcar-gen2: Always use readl()/writel()Geert Uytterhoeven
On arm32, there is no reason to use the (soon deprecated) clk_readl()/clk_writel(). Hence use the generic readl()/writel() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21clk: renesas: r8a7740: Always use readl()/writel()Geert Uytterhoeven
On arm32, there is no reason to use the (soon deprecated) clk_readl()/clk_writel(). Hence use the generic readl()/writel() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21clk: renesas: r8a73a4: Always use readl()/writel()Geert Uytterhoeven
On arm32, there is no reason to use the (soon deprecated) clk_readl()/clk_writel(). Hence use the generic readl()/writel() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21clk: renesas: mstp: Always use readl()/writel()Geert Uytterhoeven
On arm32, there is no reason to use the (soon deprecated) clk_readl()/clk_writel(). Hence use the generic readl()/writel() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21clk: renesas: div6: Always use readl()/writel()Geert Uytterhoeven
On arm32/arm64, there is no reason to use the (soon deprecated) clk_readl()/clk_writel(). Hence use the generic readl()/writel() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21clk: sunxi-ng: add missing hdmi-slow clock for H6 CCUIcenowy Zheng
The Allwinner H6 CCU has a "HDMI Slow Clock", which is currently missing in the ccu-sun50i-h6 driver. Add this missing clock to the driver. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-20clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc()Wei Yongjun
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Fixes: 322269163a36 ("clk: hisilicon: add hisi_clk_alloc function.") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20clk: davinci: cfgchip: Add TI DA8XX USB PHY clocksDavid Lechner
This adds a new driver for the USB PHY clocks in the CFGCHIP2 syscon register on TI DA8XX-type SoCs. The USB0 (USB 2.0) PHY clock is an interesting case because it calls clk_enable() in a reentrant way. The USB 2.0 PSC only has to be enabled temporarily while we are locking the PLL, which takes place during the clk_enable() callback. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20clk: davinci: New driver for TI DA8XX CFGCHIP clocksDavid Lechner
This adds a new driver for the gate and multiplexer clocks in the CFGCHIPn syscon registers on TI DA8XX-type SoCs. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20clk: davinci: Add platform information for TI DM646x PSCDavid Lechner
This adds platform-specific declarations for the PSC clocks on TI DM646x based systems. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 22:47:39 +0000