summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2020-02-08Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-07Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A collection of fixes: - Make of_clk.h self contained - Fix new qcom DT bindings that just merged to match the DTS files - Fix qcom clk driver to properly detect DFS clk frequencies - Fix the ls1028a driver to not deref a pointer before assigning it" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: of: clk: Make <linux/of_clk.h> self-contained clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for videocc-sc7180 dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180 clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for gpucc-sc7180 dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998 clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for dispcc-sc7180 clk: qcom: Get rid of fallback global names for dispcc-sc7180 dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180 clk: qcom: rcg2: Don't crash if our parent can't be found; return an error clk: ls1028a: fix a dereference of pointer 'parent' before a null check dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()
2020-02-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "The rest of MM and the rest of everything else: hotfixes, ipc, misc, procfs, lib, cleanups, arm" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits) ARM: dma-api: fix max_pfn off-by-one error in __dma_supported() treewide: remove redundant IS_ERR() before error code check include/linux/cpumask.h: don't calculate length of the input string lib: new testcases for bitmap_parse{_user} lib: rework bitmap_parse() lib: make bitmap_parse_user a wrapper on bitmap_parse lib: add test for bitmap_parse() bitops: more BITS_TO_* macros lib/string: add strnchrnul() proc: convert everything to "struct proc_ops" proc: decouple proc from VFS with "struct proc_ops" asm-generic/tlb: provide MMU_GATHER_TABLE_FREE asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE asm-generic/tlb: rename HAVE_RCU_TABLE_FREE asm-generic/tlb: add missing CONFIG symbol asm-gemeric/tlb: remove stray function declarations asm-generic/tlb: avoid potential double flush mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case ...
2020-02-03clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocksDouglas Anderson
It's nicer to use ARRAY_SIZE instead of hardcoding. Had we always been doing this it would have prevented a previous bug. See commit 74c31ff9c84a ("clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6"). Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.13.If37e4b1b5553ac9db5ea51e84a6eec286cdf209e@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03clk: qcom: Get rid of the test clock for videocc-sc7180Douglas Anderson
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.12.Ifd19a2701a102ec9f04e61a09345198383a9e937@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocksDouglas Anderson
It's nicer to use ARRAY_SIZE instead of hardcoding. Had we always been doing this it would have prevented a previous bug. See commit 74c31ff9c84a ("clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6"). Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.10.I3bf44e33f4dc7ecca10a50dbccb7dc082894fa59@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03clk: qcom: Get rid of the test clock for gpucc-sc7180Douglas Anderson
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.9.I6d5276b768f6593053be036a3e70cce298d39f0c@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocksDouglas Anderson
It's nicer to use ARRAY_SIZE instead of hardcoding. Had we always been doing this it would have prevented a previous bug. See commit 74c31ff9c84a ("clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6"). Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.6.If590c468722d2985cea63adf60c0d2b3098f37d9@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03clk: qcom: Get rid of the test clock for dispcc-sc7180Douglas Anderson
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.5.I28ac8f801456f1b950f7da10ed0f74a1344d4a35@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03clk: qcom: Get rid of fallback global names for dispcc-sc7180Douglas Anderson
In the new world input clocks should be matched by ".fw_name". sc7180 is new enough that no backward compatibility use of global names should be needed. Remove it. With a proper device tree and downstream display patches I have verified booting a sc7180 up and seeing the display after this patch. Fixes: dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.4.Ia3706a5d5add72e88dbff60fd13ec06bf7a2fd48@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03clk: qcom: rcg2: Don't crash if our parent can't be found; return an errorDouglas Anderson
When I got my clock parenting slightly wrong I ended up with a crash that looked like this: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... pc : clk_hw_get_rate+0x14/0x44 ... Call trace: clk_hw_get_rate+0x14/0x44 _freq_tbl_determine_rate+0x94/0xfc clk_rcg2_determine_rate+0x2c/0x38 clk_core_determine_round_nolock+0x4c/0x88 clk_core_round_rate_nolock+0x6c/0xa8 clk_core_round_rate_nolock+0x9c/0xa8 clk_core_set_rate_nolock+0x70/0x180 clk_set_rate+0x3c/0x6c of_clk_set_defaults+0x254/0x360 platform_drv_probe+0x28/0xb0 really_probe+0x120/0x2dc driver_probe_device+0x64/0xfc device_driver_attach+0x4c/0x6c __driver_attach+0xac/0xc0 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0xfc/0x1d0 driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 msm_drm_register+0x5c/0x60 ... It turned out that clk_hw_get_parent_by_index() was returning NULL and we weren't checking. Let's check it so that we don't crash. Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03clk: ls1028a: fix a dereference of pointer 'parent' before a null checkColin Ian King
Currently the pointer 'parent' is being dereferenced before it is being null checked. Fix this by performing the null check before it is dereferenced. Addresses-Coverity: ("Dereference before null check") Fixes: d37010a3c162 ("clk: ls1028a: Add clock driver for Display output interface") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lkml.kernel.org/r/20200203223736.99645-1-colin.king@canonical.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-02-03clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()Stephen Boyd
The DFS frequency table logic overwrites 'cfg' while detecting the parent clk and then later on in clk_rcg2_dfs_populate_freq() we use that same variable to figure out the mode of the clk, either MND or not. Add a new variable to hold the parent clk bit so that 'cfg' is left untouched for use later. This fixes problems in detecting the supported frequencies for any clks in DFS mode. Fixes: cc4f6944d0e3 ("clk: qcom: Add support for RCG to register for DFS") Reported-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200128193329.45635-1-sboyd@kernel.org Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
2020-02-03clk: ls1028a: Fix warning on clamp() usageStephen Boyd
These constants are used in clamp() with the value being clamped an unsigned long. Make them unsigned long defines so that clamp() doesn't complain about comparing different types. In file included from include/linux/list.h:9, from include/linux/kobject.h:19, from include/linux/of.h:17, from include/linux/clk-provider.h:9, from drivers/clk/clk-plldig.c:8: drivers/clk/clk-plldig.c: In function 'plldig_determine_rate': include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast 835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Wen He <wen.he_1@nxp.com> Fixes: d37010a3c162 ("clk: ls1028a: Add clock driver for Display output interface") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20200203052507.93215-1-sboyd@kernel.org
2020-02-03Merge tag 'mfd-next-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for ROHM BD71828 PMICs and GPIOs - Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341 New Device Support: - Add support for BD71828 to BD70528 RTC driver - Add support for Intel's Jasper Lake to LPSS PCI New Functionality: - Add support for Power Key to ROHM BD71828 - Add support for Clocks to ROHM BD71828 - Add support for GPIOs to Dialog DA9062 - Add support for USB PD Notify to ChromiumOS EC - Allow callers to specify args when requesting regmap lookup; syscon Fix-ups: - Improve error handling and sanity checking; atmel-hlcdc, dln2 - Device Tree support/documentation; bd71828, da9062, xylon,logicvc, ab8500, max14577, atmel-usart - Match devices using platform IDs; bd7xxxx - Refactor BD718x7 regulator component; bd718x7-regulator - Use standard interfaces/helpers; syscon, sm501 - Trivial (whitespace, spelling, etc); ab8500-core, Kconfig - Remove unused code; db8500-prcmu, tqmx86 - Wait until boot has finished before accessing registers; madera-core - Provide missing register value defaults; cs47l15-tables - Allow more time for hardware to reset; madera-core Bug Fixes: - Fix erroneous register values; rohm-bd70528 - Fix register volatility; axp20x, rn5t618 - Fix Kconfig dependencies; MFD_MAX77650 - Fix incorrect compatible string; da9062-core - Fix syscon_regmap_lookup_by_phandle_args() stub; syscon" * tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits) mfd: syscon: Fix syscon_regmap_lookup_by_phandle_args() dummy mfd: wcd934x: Add support to wcd9340/wcd9341 codec mfd: syscon: Add arguments support for syscon reference mfd: rn5t618: Mark ADC control register volatile dt-bindings: atmel-usart: Add microchip,sam9x60-{usart, dbgu} dt-bindings: atmel-usart: Remove wildcard mfd: cros_ec: Add cros-usbpd-notify subdevice mfd: da9062: Fix watchdog compatible string mfd: madera: Allow more time for hardware reset mfd: cs47l15: Add missing register default mfd: madera: Wait for boot done before accessing any other registers mfd: Kconfig: Rename Samsung to lowercase mfd: tqmx86: remove set but not used variable 'i2c_ien' mfd: dbx500-prcmu: Drop DSI pll clock functions mfd: dbx500-prcmu: Drop set_display_clocks() mfd: max77650: Select REGMAP_IRQ in Kconfig mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile mfd: ab8500: Fix ab8500-clk typo mfd: intel-lpss: Add Intel Jasper Lake PCI IDs dt-bindings: mfd: max14577: Add reference to max14040_battery.txt descriptions ...
2020-01-31Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', ↵Stephen Boyd
'clk-freescale' and 'clk-qoriq' into clk-next - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
2020-01-31Merge branches 'clk-debugfs-danger', 'clk-basic-hw', 'clk-renesas', ↵Stephen Boyd
'clk-amlogic' and 'clk-allwinner' into clk-next - Support dangerous debugfs actions on clks with dead code - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs * clk-debugfs-danger: clk: Add support for setting clk_rate via debugfs * clk-basic-hw: clk: divider: Add support for specifying parents via DT/pointers clk: gate: Add support for specifying parents via DT/pointers clk: mux: Add support for specifying parents via DT/pointers clk: asm9260: Use parent accuracy in fixed rate clk clk: fixed-rate: Document that accuracy isn't a rate clk: fixed-rate: Add clk flags for parent accuracy clk: fixed-rate: Add support for specifying parents via DT/pointers clk: fixed-rate: Document accuracy member clk: fixed-rate: Move to_clk_fixed_rate() to C file clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy() clk: fixed-rate: Convert to clk_hw based APIs clk: gpio: Use DT way of specifying parents * clk-renesas: clk: renesas: Prepare for split of R-Car H3 config symbol dt-bindings: clock: renesas: cpg-mssr: Fix r8a774b1 typo clk: renesas: r7s9210: Add SPIBSC clock clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks clk: renesas: Remove use of ARCH_R8A7796 clk: renesas: rcar-gen2: Change multipliers and dividers to u8 * clk-amlogic: clk: clarify that clk_set_rate() does updates from top to bottom clk: meson: meson8b: make the CCF use the glitch-free mali mux clk: meson: pll: Fix by 0 division in __pll_params_to_rate() clk: meson: g12a: fix missing uart2 in regmap table clk: meson: meson8b: use of_clk_hw_register to register the clocks clk: meson: meson8b: don't register the XTAL clock when provided via OF clk: meson: meson8b: change references to the XTAL clock to use [fw_]name clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding * clk-allwinner: clk: sunxi: a23/a33: Export the MIPI PLL clk: sunxi: a31: Export the MIPI PLL clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock clk: sunxi-ng: r40: Export MBUS clock clk: sunxi: use of_device_get_match_data
2020-01-31Merge branches 'clk-uniphier', 'clk-warn-critical', 'clk-ux500', ↵Stephen Boyd
'clk-kconfig' and 'clk-at91' into clk-next - Warn about critical clks that fail to enable or prepare - Detect more PRMCU variants in ux500 driver * clk-uniphier: clk: uniphier: Add SCSSI clock gate for each channel * clk-warn-critical: clk: Warn about critical clks that fail to enable clk: Don't try to enable critical clocks if prepare failed clk: tegra: Fix double-free in tegra_clk_init() clk: samsung: exynos5420: Keep top G3D clocks enabled clk: qcom: Avoid SMMU/cx gdsc corner cases clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs clk: Move clk_core_reparent_orphans() under CONFIG_OF clk: at91: fix possible deadlock clk: walk orphan list on clock provider registration clk: imx: pll14xx: fix clk_pll14xx_wait_lock clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table clk: imx: clk-composite-8m: add lock to gate/mux * clk-ux500: clk: ux500: Fix up the SGA clock for some variants * clk-kconfig: clk: Fix Kconfig indentation * clk-at91: clk: at91: sam9x60: fix programmable clock prescaler clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default value
2020-01-31Merge branches 'clk-init-allocation', 'clk-unused' and ↵Stephen Boyd
'clk-register-dt-node-better' into clk-next - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() * clk-init-allocation: clk: add terminate callback to clk_ops clk: let init callback return an error code clk: actually call the clock init before any other callback of the clock * clk-unused: clk: bm1800: Remove set but not used variable 'fref' * clk-register-dt-node-better: clk: Use parent node pointer during registration if necessary
2020-01-30clk: qoriq: add ls1088a hwaccel clocks supportYangbo Lu
This patch is to add hwaccel clocks information for ls1088a. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lkml.kernel.org/r/20191216100111.17122-1-yangbo.lu@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-30clk: ls1028a: Add clock driver for Display output interfaceWen He
Add clock driver for QorIQ LS1028A Display output interfaces(LCD, DPHY), as implemented in TSMC CLN28HPM PLL, this PLL supports the programmable integer division and range of the display output pixel clock's 27-594MHz. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lkml.kernel.org/r/20191213083402.35678-2-wen.he_1@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-28clk: fsl-sai: new driverMichael Walle
With this driver it is possible to use the BCLK pin of the SAI module as a generic clock output. This is esp. useful if you want to drive a clock to an audio codec. Because the output only allows integer divider values the audio codec needs an integrated PLL. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lkml.kernel.org/r/20200102231101.11834-3-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-28clk: composite: add _register_composite_pdata() variantsMichael Walle
Add support for the new way of specifying the clock parents. Add the two new functions clk_hw_register_composite_pdata() clk_register_composite_pdata() to let the driver provide parent_data instead of the parent_names. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lkml.kernel.org/r/20200102231101.11834-1-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-28clk: qcom: rpmh: Sort OF match tableBjorn Andersson
sc7180 was added to the end of the match table, sort the table. Fixes: eee28109f871 ("clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lkml.kernel.org/r/20200124175934.3937473-1-bjorn.andersson@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-24clk: bd718x7: Support ROHM BD71828 clk blockMatti Vaittinen
BD71828GW is a single-chip power management IC for battery-powered portable devices. Add support for controlling BD71828 clk using bd718x7 driver. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24mfd: Rohm PMICs: Use platform_device_id to match MFD sub-devicesMatti Vaittinen
Thanks to Stephen Boyd I today learned we can use platform_device_id to do device and module matching for MFD sub-devices! Do device matching using the platform_device_id instead of using explicit module_aliases to load modules and custom parent-data field to do module loading and sub-device matching. Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-23clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flagTejas Patel
Existing clock divider functions is not checking for base of divider. So, if any clock divider is power of 2 then clock rate calculation will be wrong. Add support to calculate divider value for the clocks with CLK_DIVIDER_POWER_OF_TWO flag. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-7-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23clk: zynqmp: Fix divider calculationRajan Vaja
zynqmp_clk_divider_round_rate() returns actual divider value after calculating from parent rate and desired rate, even though that rate is not supported by single divider of hardware. It is also possible that such divisor value can be achieved through 2 different dividers. As, Linux tries to set such divisor value(out of range) in single divider set divider is getting failed. Fix the same by computing best possible combination of two divisors which provides more accurate clock rate. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-6-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23clk: zynqmp: Add support for get max dividerRajan Vaja
To achieve best possible rate, maximum limit of divider is required while computation. Get maximum supported divisor from firmware. To maintain backward compatibility assign maximum possible value(0xFFFF) if query for max divisor is not successful. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-5-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Remove else return and just return] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23clk: zynqmp: Warn user if clock user are more than allowedRajan Vaja
Warn user if clock is used by more than allowed devices. This check is done by firmware and returns respective error code. Upon receiving error code for excessive user, warn user for the same. This change is done to restrict VPLL use count. It is assumed that VPLL is used by one user only. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-4-git-send-email-rajan.vaja@xilinx.com Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23clk: zynqmp: Extend driver for versalRajan Vaja
Add Versal compatible string to support Versal binding. Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Link: https://lkml.kernel.org/r/1575527759-26452-3-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-23ARM: dts: Add missing omap5 secure clocksTony Lindgren
The secure clocks on omap5 are similar to what we already have for dra7 with dra7_l4sec_clkctrl_regs and documented in the omap5432 TRM in "Table 3-1044. CORE_CM_CORE Registers Mapping Summary". The secure clocks are part of the l4per clock manager. As the l4per clock manager has now two clock domains as children, let's also update the l4per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Compared to omap4, omap5 has more clocks working in hardare autogating mode. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-23ARM: dts: Add missing omap4 secure clocksTony Lindgren
The secure clocks on omap4 are similar to what we already have for dra7 in dra7_l4sec_clkctrl_regs and documented in the omap4460 TRM "Table 3-1346 L4PER_CM2 Registers Mapping Summary". The secure clocks are part of the l4_per clock manager. As the l4_per clock manager has now two clock domains as children, let's also update the l4_per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-20clk: ti: clkctrl: Fix hidden dependency to node nameTony Lindgren
We currently have a hidden dependency to the device tree node name for the clkctrl clocks. Instead of using standard node name like "clock", we must use "l4-per-clkctrl" type naming so the clock driver can find the associated clock domain. Further, if "clk" is specified for a clock node name, the driver sets TI_CLK_CLKCTRL_COMPAT flag that uses different logic for the clock name based on the parent node name for the all the clkctrl clocks for the SoC. If the clock node naming dependency is not understood, the related clockdomain is not found, or a wrong one can get used if a clock manager has multiple clock domains. As each clkctrl instance represents a single clock domain, let's allow using domain specific compatible names to specify the clock domain. This simplifies things and removes the hidden dependency to the node name. And then later on, after the node names have been standardized, we can drop the related code for parsing the node names. Let's also update the binding to use standard "clock" node naming instead of "clk" and add the missing description for reg. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20clk: ti: add clkctrl data dra7 sgxTony Lindgren
This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately. Cc: Benoit Parrot <bparrot@ti.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20clk: ti: omap5: Add missing AESS clockTony Lindgren
Looks like we're missing AESS clock for omap5. This is similar to what omap4 has. Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20clk: ti: dra7: fix parent for gmac_clkctrlGrygorii Strashko
The parent clk for gmac clk ctrl has to be gmac_main_clk (125MHz) instead of dpll_gmac_ck (1GHz). This is caused incorrect CPSW MDIO operation. Hence, fix it. Fixes: dffa9051d546 ('clk: ti: dra7: add new clkctrl data') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20clk: ti: dra7: add vpe clkctrl dataBenoit Parrot
Add clkctrl data for VPE. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20clk: ti: dra7: add cam clkctrl dataBenoit Parrot
Add clkctrl data for CAM domain. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I've been sitting on these longer than I meant, so the patch count is a bit higher than ideal for this part of the release. There's also some reverts of double-applied patches that brings the diffstat up a bit. With that said, the biggest changes are: - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees. - Move of two device nodes that got applied to the wrong part of the tree on ASpeed G6. - Regulator fix for Beaglebone X15 (adding 12/5V supplies) - Use interrupts for keys on Amlogic SM1 to avoid missed polls In addition to that, there is a collection of smaller DT fixes: - Power supply assignment fixes for i.MX6 - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit - Build fixlets (selects) for davinci/omap2+ - More interrupt number fixes for Stratix10, Amlogic SM1, etc. - ... and more similar fixes across different platforms And some non-DT stuff: - optee fix to register multiple shared pages properly - Clock calculation fixes for MMP3 - Clock fixes for OMAP as well" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL ARM: omap2plus: select RESET_CONTROLLER ARM: davinci: select CONFIG_RESET_CONTROLLER ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location ARM: dts: mmp3: Fix the TWSI ranges clk: mmp2: Fix the order of timer mux parents ARM: mmp: do not divide the clock rate arm64: dts: rockchip: Fix IR on Beelink A1 optee: Fix multi page dynamic shm pool alloc ...
2020-01-13Merge tag 'sunxi-clk-fixes-for-5.5' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull Allwinner clk fixes from Maxime Ripard: Our usual set of fixes for Allwinner, to fix the number of reported clocks on the v3s, fixing the external clock on the R40, and some fixes for the AR100 co-processor clocks. * tag 'sunxi-clk-fixes-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order clk: sunxi-ng: h6-r: Simplify R_APB1 clock definition clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.
2020-01-12clk: imx: Add support for i.MX8MP clock driverAnson Huang
Add clock driver support for i.MX8MP which is a new SoC of i.MX8M family. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-12clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based APIAnson Huang
Switch the imx_clk_gate4_flags() function to clk_hw based API, rename accordingly and add a macro for clk based legacy. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-10clk: tegra20/30: Explicitly set parent clock for Video DecoderDmitry Osipenko
The VDE parent won't be changed automatically to PLLC if bootloader didn't do that for us, hence let's explicitly set the parent for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10clk: tegra20/30: Don't pre-initialize displays parent clockDmitry Osipenko
Both Tegra20 and Tegra30 are initializing display's parent clock incorrectly because PLLP is running at 216/408MHz while display rate is set to 600MHz, but pre-setting the parent isn't needed at all because display driver selects proper parent anyways. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 13:26:44 +0000