| Age | Commit message (Collapse) | Author |
|---|
|
There is a case where NULL can be a valid return value for
ti_clk_get_reg_addr, specifically the case where both the provider index
and register offsets are zero. In this case, the current error checking
against a NULL pointer will fail. Thus, change the API to return a
ERR_PTR value in an error case, and change all the users of this API to
check against IS_ERR instead.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Michael Turquette <mturquette@linaro.org>
|
|
The 'ARM: OMAP3: legacy clock data move under clk driver' patch series
causes build errors when CONFIG_OMAP3 is not set:
drivers/clk/ti/dpll.c: In function 'ti_clk_register_dpll':
drivers/clk/ti/dpll.c:199:31: error: 'omap3_dpll_ck_ops' undeclared (first use in this function)
const struct clk_ops *ops = &omap3_dpll_ck_ops;
^
drivers/clk/ti/dpll.c:199:31: note: each undeclared identifier is reported only once for each function it appears in
drivers/clk/ti/dpll.c:259:10: error: 'omap3_dpll_per_ck_ops' undeclared (first use in this function)
ops = &omap3_dpll_per_ck_ops;
^
drivers/built-in.o: In function `ti_clk_register_gate':
drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_omap3430es2_dss_usbhost_wait'
drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_am35xx_ipss_module_wait'
-in.o: In function `ti_clk_register_interface':
drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_hsotgusb_wait'
drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_dss_usbhost_wait'
drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_ssi_wait'
drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_am35xx_ipss_wait'
drivers/built-in.o: In function `ti_clk_register_composite':
:(.text+0x3da768): undefined reference to `ti_clk_build_component_gate'
In order to fix that problem, this patch makes the omap3 legacy code
compiled only when both CONFIG_OMAP3 and CONFIG_ATAGS are set.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
|
|
Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
|
|
Currently, DPLLs are hiding the gory details of switching parent
within set_rate, which confuses the common clock code and is wrong.
Fixed by applying the new determine_rate() and set_rate_and_parent()
functionality to any clock-ops previously using the broken approach.
This patch also removes the broken legacy code.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
|
|
Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if
AM43XX is defined.
Fixes the below boot issue.
[ 2.157258] gpmc_l3_clk not enabled
[ 2.161194] gpmc_l3_clk not enabled
[ 2.164896] Division by zero in kernel.
[ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273
[ 2.178880] Workqueue: deferwq deferred_probe_work_func
[ 2.184459] [<c001477c>] (unwind_backtrace) from [<c001187c>] (show_stack+0x10/0x14)
[ 2.192752] [<c001187c>] (show_stack) from [<c0530f28>] (dump_stack+0x80/0x9c)
[ 2.200486] [<c0530f28>] (dump_stack) from [<c02c867c>] (Ldiv0+0x8/0x10)
[ 2.207678] [<c02c867c>] (Ldiv0) from [<c0022da0>] (gpmc_calc_divider+0x24/0x40)
[ 2.215490] [<c0022da0>] (gpmc_calc_divider) from [<c0022e20>] (gpmc_cs_set_timings+0x18/0x474)
[ 2.224783] [<c0022e20>] (gpmc_cs_set_timings) from [<c003069c>] (gpmc_nand_init+0x74/0x1a8)
[ 2.233791] [<c003069c>] (gpmc_nand_init) from [<c0024668>] (gpmc_probe+0x52c/0x874)
[ 2.242089] [<c0024668>] (gpmc_probe) from [<c0349218>] (platform_drv_probe+0x18/0x48)
[ 2.250534] [<c0349218>] (platform_drv_probe) from [<c0347d88>] (driver_probe_device+0x104/0x22c)
[ 2.259988] [<c0347d88>] (driver_probe_device) from [<c03464dc>] (bus_for_each_drv+0x44/0x8c)
[ 2.269087] [<c03464dc>] (bus_for_each_drv) from [<c0347c4c>] (device_attach+0x74/0x8c)
[ 2.277620] [<c0347c4c>] (device_attach) from [<c0347380>] (bus_probe_device+0x88/0xb0)
[ 2.286074] [<c0347380>] (bus_probe_device) from [<c0347768>] (deferred_probe_work_func+0x60/0x90)
[ 2.295611] [<c0347768>] (deferred_probe_work_func) from [<c004ef50>] (process_one_work+0x1b4/0x4bc)
[ 2.305288] [<c004ef50>] (process_one_work) from [<c004f3d4>] (worker_thread+0x148/0x550)
[ 2.313954] [<c004f3d4>] (worker_thread) from [<c0055a48>] (kthread+0xc8/0xe4)
[ 2.321628] [<c0055a48>] (kthread) from [<c000e648>] (ret_from_fork+0x14/0x2c)
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
|
frequencies
MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum
frequency it can be locked at. Duty Cycle Correction circuit is used
to recover a correct duty cycle for achieving higher frequencies
(hardware internally switches output to M3 output(CLKOUTHIF) from M2
output (CLKOUT)).
So provide support to setup required data to handle Duty cycle by
the setting up the minimum frequency for DPLL. 1.4GHz is common
for all these devices and is based on Technical Reference Manual
information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output
Clocks Parameters", and equivalent information from DRA75x, DRA72x
documentation(SPRUHP2E, SPRUHI2P).
Signed-off-by: Nishanth Menon <nm@ti.com>
[t-kristo@ti.com: updated for latest dpll init API call]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
OMAP2 has slightly different DPLL compared to later OMAP generations.
This patch adds support for the ti,omap2-dpll-core-clock and also adds
the bindings documentation.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
AMxxxx dpll_data previously had autoidle_mask set, even if these SoC:s
don't have autoidle register. Remove the bit-field value as it is unused,
also drop the unnecessary DPLL_HAS_AUTOIDLE flag passing during init,
as we can just simply check against the contents of the autoidle_mask.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
The OMAP clock driver now supports DPLL clock type. This patch also
adds support for DT DPLL nodes.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
