summaryrefslogtreecommitdiff
path: root/drivers/clk/tegra
AgeCommit message (Collapse)Author
2013-04-04clk: tegra: Refactor PLL programming codePeter De Schrijver
Refactor the PLL programming code to make it useable by the new PLL types introduced by Tegra114. The following changes were done: * Split programming the PLL into updating m,n,p and updating cpcon * Move locking from _update_pll_cpcon() to clk_pll_set_rate() * Introduce _get_pll_mnp() helper * Move check for identical m,n,p values to clk_pll_set_rate() * struct tegra_clk_pll_freq_table will always contain the values as defined by the hardware. * Simplify the arguments to clk_pll_wait_for_lock() * Split _tegra_clk_register_pll() Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04clk: tegra: provide dummy cpu car opsPeter De Schrijver
tegra_boot_secondary() relies on some of the car ops. This means having an uninitialized tegra_cpu_car_ops will lead to an early boot panic. Providing a dummy struct avoids this and makes adding Tegra114 clock support in a bisectable way a lot easier. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04clk: tegra: defer application of init tableStephen Warren
The Tegra clock driver is initialized during the ARM machine descriptor's .init_irq() hook. It can't be initialized earlier, since dynamic memory usage is required. It can't be initialized later, since the .init_timer() hook needs the clocks initialized. However, at this time, udelay() doesn't work. The Tegra clock initialization table may enable some PLLs. Enabling a PLL may require usage of udelay(). Hence, this can't happen right when the clock driver is initialized. To solve this, separate the clock driver initialization from the clock table processing, so they can execute at separate times. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04clk: tegra: Fix cdev1 and cdev2 IDsPrashant Gaikwad
Correct IDs for cdev1 and cdev2 are 94 and 93 respectively. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: split into separate driver and device-tree patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04clk: tegra: Make gr2d and gr3d clocks children of pll_cThierry Reding
By default these clocks are children of pll_m, but in downstream kernels they are reparented to pll_c. While at it, decrease their frequencies to 300 MHz because the defaults aren't in the specified range. gr2d can reportedly run at much higher frequencies, but 300 MHz works and is a more conservative default. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04clk: tegra: Export peripheral reset functionsThierry Reding
The tegra_periph_reset_assert() and tegra_periph_reset_deassert() functions can be used by drivers to reset peripherals. In order to allow such drivers to be built as modules, export the functions. Note that this restores the status quo as the functions were exported before the move to the drivers/clk tree. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04clk: tegra: Fix periph_clk_to_bit macroYen Lin
The parameter name should be "gate", not "periph". This worked, however, because it happens that everywhere periph_clk_to_bit is called, "gate" was in the local scope. Signed-off-by: Yen Lin <yelin@nvidia.com> Signed-off-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04Merge remote-tracking branch 'linaro_mturquette_linux/clk-for-3.10' into ↵Stephen Warren
for-3.10/clk
2013-04-04Merge branch 'for-3.10/soc' into for-3.10/clkStephen Warren
2013-04-01clk: tegra: Allow PLLE training to succeedThierry Reding
Under some circumstances the PLLE needs to be retrained, in which case access to the PMC registers is required. Fix this by passing a pointer to the PMC registers instead of NULL when registering the PLLE clock. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-29ARM: tegra: move <mach/powergate.h> to <linux/tegra-powergate.h>Stephen Warren
This is required so that code such as Tegra's PCIe and clock drivers can still access this header file once Tegra is converted to multiplatform, and <mach/> no longer exists. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-22clk: add table lookup to muxPeter De Schrijver
Add a table lookup feature to the mux clock. Also allow arbitrary masks instead of the width. This will be used by some clocks on Tegra114. Also adapt the tegra periph clk because it uses struct clk_mux directly. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-11clk: tegra: No 7.1 super clk dividers on Tegra20Peter De Schrijver
Unlike Tegra30, Tegra20 does not have a 7.1 divider for the CPU superclk. Remove the clocks related to the divider. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-04clk: Tegra: Remove duplicate smp_twd clockPrashant Gaikwad
Remove duplicate smp_twd clocks as these clocks are accessed using DT now. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-13clk: tegra: initialise parent of uart clocksLaxman Dewangan
Initialise the parent of UARTs to PLLP and disabling clock by default. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13clk: tegra: fix driver to match DT bindingStephen Warren
enum tegra*_clk is intended to match the IDs listed in the Tegra clock bindings. There are a few mismatches, which this patch fixes: 1) pll_s and cop were left out of the Tegra20 enum. 2) spdif_in and spdif_out were swapped relative to the Tegra30 binding. 3) i2cslow was misnamed as i2c_slow, and a duplicate i2cslow clock added to the Tegra30 enum. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-02-12clk: tegra: local arrays should be staticPeter De Schrijver
cclk_g_parents, cclk_lp_parents and sclk_parents are only accessed from within clk-tegra30.c. Declare them static to avoid namespace polution. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: Add missing spinlock for hclk and pclkPeter De Schrijver
The hclk and pclk clocks are controlled by the same register. Hence a lock is required to avoid corruption. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: Implement locking for super clockPeter De Schrijver
Although tegra_clk_register_super_mux() has a lock parameter, the lock is not actually used by the code. Fixed with this patch. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: fix wrong clock index between se to sata_coldJoseph Lo
The index of se should be 127. And the previous clock index was 125. So we need to set up the index for se to get the correct index between se to sata_cold. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra20: Implementing CPU low-power function for tegra_cpu_car_opsJoseph Lo
Implementing suspend, resume and rail_off_ready API for tegra_cpu_car_ops. These functions were used for CPU powered-down state maintenance. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra30: remove unused TEGRA_CLK_DUPLICATE()sPrashant Gaikwad
With device tree support added for Tegra clocks look up is done from device tree, remove unused TEGRA_CLK_DUPLICATE()s. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra20: remove unused TEGRA_CLK_DUPLICATE()sPrashant Gaikwad
With device tree support added for Tegra clocks look up is done from device tree, remove unused TEGRA_CLK_DUPLICATE()s. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra: add clock support for Tegra30Prashant Gaikwad
Add Tegra30 clock support based on common clock framework. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: ensure all OF lookups return valid cookies i.e. an explicit error pointer or valid pointer not NULL, adapt to renames in earlier patches, fixed some checkpatch issues.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra: add clock support for Tegra20Prashant Gaikwad
Add Tegra20 clock support based on common clock framework. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: s/1GHz/100MHz/ in call to tegra_clk_plle() to fix PCIe, implemented KBC clock, ensure all OF lookups return valid cookies i.e. an explicit error pointer or valid pointer not NULL, adapt to renames in earlier patches, fixed some checkpatch issues.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra: add Tegra specific clocksPrashant Gaikwad
Add Tegra specific clocks, pll, pll_out, peripheral, frac_divider, super. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: alloc sizeof(*foo) not sizeof(struct foo), add comments re: storing pointers to stack variables, make a timeout loop more idiomatic, use _clk_pll_disable() not clk_disable_pll() from _program_pll() to avoid redundant lock operations, unified tegra_clk_periph() and tegra_clk_periph_nodiv(), unified tegra_clk_pll{,e}, rename all clock registration functions so they don't have the same name as the clock structs, return -EINVAL from clk_plle_enable when matching table rate not found, pass ops to _tegra_clk_register_pll rather than a bool.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 14:17:05 +0000