summaryrefslogtreecommitdiff
path: root/drivers/clk/mediatek
AgeCommit message (Collapse)Author
2019-07-22clk: mediatek: mt8183: Register 13MHz clock earlier for clocksourceWeiyi Lu
The 13MHz clock should be registered before clocksource driver is initialized. Use CLK_OF_DECLARE_DRIVER() to guarantee. Fixes: acddfc2c261b ("clk: mediatek: Add MT8183 clock support") Cc: <stable@vger.kernel.org> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-07-12Merge branches 'clk-debugfs', 'clk-unused', 'clk-refactor' and 'clk-qoriq' ↵Stephen Boyd
into clk-next - Add a 'clk_parent' file in clk debugfs - Remove dead code in various clk drivers * clk-debugfs: clk: Add clk_parent entry in debugfs * clk-unused: clk: qcom: Fix -Wunused-const-variable clk: mmp: frac: Remove set but not used variable 'prev_rate' clk: ti: Remove unused functions clk: mediatek: mt8516: Remove unused variable * clk-refactor: clk: clk-cdce706: simplify getting the adapter of a client clk: Simplify clk_core_can_round() * clk-qoriq: clk: qoriq: add support for lx2160a
2019-06-07clk: mediatek: mt8516: Remove unused variablePhilippe Mazenauer
Variable 'ddrphycfg_parents' is defined static and initialized, but not used in the file. ../drivers/clk/mediatek/clk-mt8516.c:234:27: warning: ‘ddrphycfg_parents’ defined but not used [-Wunused-const-variable=] static const char * const ddrphycfg_parents[] __initconst = { ^~~~~~~~~~~~~~~~~ Signed-off-by: Philippe Mazenauer <philippe.mazenauer@outlook.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-06clk: mediatek: Remove MT8183 unused clockErin Lo
Remove MT8183 sspm clock Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-06clk: mediatek: add audsys clock driver for MT8516Fabien Parent
Add audsys clock driver for MediaTek MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge branches 'clk-renesas', 'clk-qcom', 'clk-mtk', 'clk-milbeaut' and ↵Stephen Boyd
'clk-imx' into clk-next - Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support * clk-renesas: clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: r8a77980: Fix RPC-IF module clock's parent clk: renesas: rcar-gen3: Rename DRIF clocks clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: r8a77990: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: r9a06g032: Add missing PCI USB clock clk: renesas: r7s9210: Always use readl() clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() * clk-qcom: clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998 clk: qcom: Add QCS404 TuringCC clk: qcom: branch: Add AON clock ops dt-bindings: clock: Introduce Qualcomm Turing Clock controller clk: qcom: gcc-qcs404: Add CDSP related clocks and resets * clk-mtk: clk: mediatek: add clock driver for MT8516 dt-bindings: mediatek: apmixedsys: add support for MT8516 dt-bindings: mediatek: infracfg: add support for MT8516 dt-bindings: mediatek: topckgen: add support for MT8516 clk: mediatek: Allow changing PLL rate when it is off clk: mediatek: Add MT8183 clock support clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data clk: mediatek: Add dt-bindings for MT8183 clocks dt-bindings: ARM: Mediatek: Document bindings for MT8183 clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data clk: mediatek: Add new clkmux register API clk: mediatek: Disable tuner_en before change PLL rate * clk-milbeaut: clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description * clk-imx: clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset clk: imx6sll: Fix mispelling uart4_serial as serail clk: imx: pll14xx: drop unused variable clk: imx: rename clk-imx51-imx53.c to clk-imx5.c clk: imx5: Fix i.MX50 ESDHC clock registers clk: imx5: Fix i.MX50 mainbus clock registers clk: imx: Remove unused imx_get_clk_hw_fixed dt-bindings: clock: imx7ulp: remove SNVS clock clk: imx7ulp: remove snvs clock
2019-04-25clk: mediatek: add clock driver for MT8516Fabien Parent
Add the clock driver for the MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12clk: mediatek: fix clk-gate flag settingWeiyi Lu
CLK_SET_RATE_PARENT would be dropped. Merge two flag setting together to correct the error. Fixes: 5a1cc4c27ad2 ("clk: mediatek: Add flags to mtk_gate") Cc: <stable@vger.kernel.org> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Allow changing PLL rate when it is offJames Liao
Some modules may need to change its clock rate before turn on it. So changing PLL's rate when it is off should be allowed. This patch removes PLL enabled check before set rate, so that PLLs can set new frequency even if they are off. On MT8173 for example, ARMPLL's enable bit can be controlled by other HW. That means ARMPLL may be turned on even if we (CPU / SW) set ARMPLL's enable bit as 0. In this case, SW may want and can still change ARMPLL's rate by changing its pcw and postdiv settings. But without this patch, new pcw setting will not be applied because its enable bit is 0. Signed-off-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Michael Turquette <mturuqette@baylibre.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Add MT8183 clock supportWeiyi Lu
Add MT8183 clock support, include topckgen, apmixedsys, infracfg, mcucfg and subsystem clocks. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_dataWeiyi Lu
In previous MediaTek PLL design, it assumes the pcw change control is always on the CON1 register. However, the pcw change bit on MT8183 was moved onto CON0 because the the PCW length of audio PLLs are extended to 32-bit. Add configurable pcw_chg_reg to set the pcw change control register address or using the default control register CON1 if without setting in pll data. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_dataOwen Chen
1. pcwibits: The integer bits of pcw for PLLs is extend to 8 bits, add a variable to indicate this change and backward-compatible. 2. fmin: The PLL frequency lower-bound is vary from 1GHz to 1.5GHz, add a variable to indicate platform-dependent. Signed-off-by: Owen Chen <owen.chen@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Add new clkmux register APIOwen Chen
On both MT8183 & MT6765, there add "set/clr" register for each clkmux setting, and one update register to trigger value change. It is designed to prevent read-modify-write racing issue. The sw design need to add a new API to handle this hw change with a new mtk_clk_mux/mtk_mux struct in new file "clk-mux.c", "clk-mux.h". Signed-off-by: Owen Chen <owen.chen@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: Nicolas Boichat <drinkcat@chromium.org> [sboyd@kernel.org: Squash in flags=0 to silence warning] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: mediatek: Disable tuner_en before change PLL rateOwen Chen
PLLs with tuner_en bit, such as APLL1, need to disable tuner_en before apply new frequency settings, or the new frequency settings (pcw) will not be applied. The tuner_en bit will be disabled during changing PLL rate and be restored after new settings applied. Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support) Cc: <stable@vger.kernel.org> Signed-off-by: Owen Chen <owen.chen@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-08Merge branches 'clk-typo', 'clk-json-schema', 'clk-mtk-2712-eco' and ↵Stephen Boyd
'clk-rockchip' into clk-next - Convert a few clk bindings to JSON schema format - 3rd ECO fix for Mediatek MT2712 SoCs * clk-typo: clk: samsung: fix typo * clk-json-schema: dt-bindings: clock: Convert fixed-factor-clock to json-schema dt-bindings: clock: Convert fixed-clock binding to json-schema * clk-mtk-2712-eco: clk: mediatek: update clock driver of MT2712 dt-bindings: clock: add clock for MT2712 * clk-rockchip: clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks clk: rockchip: fix frac settings of GPLL clock for rk3328
2019-03-08Merge branches 'clk-ingenic', 'clk-mtk-mux', 'clk-qcom-sdm845-pcie', ↵Stephen Boyd
'clk-mtk-crit' and 'clk-mtk' into clk-next * clk-ingenic: clk: ingenic: Remove set but not used variable 'enable' clk: ingenic: Fix doc of ingenic_cgu_div_info clk: ingenic: Fix round_rate misbehaving with non-integer dividers clk: ingenic: jz4740: Fix gating of UDC clock * clk-mtk-mux: clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 * clk-qcom-sdm845-pcie: clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks * clk-mtk-crit: clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro * clk-mtk: clk: mediatek: correct cpu clock name for MT8173 SoC
2019-02-26clk: mediatek: correct cpu clock name for MT8173 SoCSeiya Wang
Correct cpu clock name from ca57 to ca72 since MT8173 does use cortex-a72. Signed-off-by: Seiya Wang <seiya.wang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: mediatek: Mark bus and DRAM related clocks as criticalJasper Mattsson
Currently, DRAM-related clocks are not marked with CLK_IS_CRITICAL for MT6797. This causes memory corruption when the system is booted without clk_ignore_unused. This patch marks MUX ddrphycfg_sel as well as gates infra_dramc_f26m and infra_dramc_b_f26m as CLK_IS_CRITICAL. Signed-off-by: Jasper Mattsson <jasu@njomotys.info> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: mediatek: Add flags to mtk_gateJasper Mattsson
This is required to mark gates as CLK_IS_CRITICAL. Signed-off-by: Jasper Mattsson <jasu@njomotys.info> Acked-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: mediatek: Add MUX_FLAGS macroJasper Mattsson
This is required to mark outputs of certain MUXes as CLK_IS_CRITICAL. Signed-off-by: Jasper Mattsson <jasu@njomotys.info> Acked-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_selchunhui dai
The MUX clock of dpi1_sel should select the closet clock for itself. We could add this flag to enable this function of MUX in CCF. Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: wangyan wang <wangyan.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25clk: mediatek: add MUX_GATE_FLAGS_2chunhui dai
Add MUX_GATE_FLAGS_2 for the clock which needs to set two falgs. Such as some mux need to set the flags of "CLK_MUX_ROUND_CLOSEST". Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: wangyan wang <wangyan.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: mediatek: fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-05clk: mediatek: update clock driver of MT2712Weiyi Lu
According to 3rd ECO design change, 1. Add new fixed factor clock of audio. 2. Add the parent clocks for audio clock mux. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-05clk: mediatek: fix the PCIe MAC clock parentRyder Lee
The PCIe function doesn't work as the clock tree of MAC layer is wrong. Hence fix the clock table. Fixes: 3b5e748615e7 ("clk: mediatek: add clock support for MT7629 SoC") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-30clk: mediatek: Drop more __init markings for driver probeStephen Boyd
This function is called from driver probe, which isn't the same as __init code because driver probe can happen later. Drop the __init marking here to fix this potential problem. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Rob Herring <robh@kernel.org> Cc: Wenzhen Yu <wenzhen.yu@mediatek.com> Cc: Weiyi Lu <weiyi.lu@mediatek.com> Fixes: 2fc0a509e4ee ("clk: mediatek: add clock support for MT7622 SoC") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-30clk: mediatek: Drop __init from mtk_clk_register_cpumuxes()Stephen Boyd
This function is used from more places than just __init code. Removing __init silences a section mismatch warning here. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Rob Herring <robh@kernel.org> Cc: Wenzhen Yu <wenzhen.yu@mediatek.com> Cc: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-29clk: mediatek: add clock support for MT7629 SoCRyder Lee
Add all supported clocks exported from every susbystem found on MT7629 SoC. Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-30clk: mediatek: remove unused array audio_parentsColin Ian King
Array audio_parents is declared but never used, hence it is redundant and can be removed. Cleans up clang warning: warning: 'audio_parents' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-04Merge branches 'clk-hisi-usb', 'clk-silent-bulk', 'clk-mtk-hdmi', ↵Stephen Boyd
'clk-mtk-mali' and 'clk-imx6ul-ccosr' into clk-next * clk-hisi-usb: clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoC * clk-silent-bulk: clk: bulk: silently error out on EPROBE_DEFER * clk-mtk-hdmi: clk: mediatek: correct the clocks for MT2701 HDMI PHY module * clk-mtk-mali: clk: mediatek: add g3dsys support for MT2701 and MT7623 dt-bindings: reset: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add g3dsys bindings * clk-imx6ul-ccosr: clk: imx: Add new clo01 and clo2 controlled by CCOSR
2018-05-15clk: mediatek: add g3dsys support for MT2701 and MT7623Sean Wang
Add clock driver support for g3dsys on MT2701 and MT7623, which is providing essential clock gate and reset controller to Mali-450. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15clk: mediatek: correct the clocks for MT2701 HDMI PHY moduleRyder Lee
The hdmitx_dig_cts clock signal is not a child of clk26m, and the actual output of the PLL block is derived from the tvdpll via a configurable PLL post-divider. It is used as the PLL reference input to the HDMI PHY module. Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Chunhui Dai <chunhui.dai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06Merge branches 'clk-mediatek', 'clk-hisi', 'clk-allwinner', 'clk-ux500' and ↵Stephen Boyd
'clk-renesas' into clk-next * clk-mediatek: clk: mediatek: add audsys support for MT2701 clk: mediatek: add devm_of_platform_populate() for MT7622 audsys dt-bindings: clock: mediatek: add audsys support for MT2701 dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device clk: mediatek: update missing clock data for MT7622 audsys clk: mediatek: fix PWM clock source by adding a fixed-factor clock dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4 * clk-hisi: clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc() clk: hisilicon: mark wdt_mux_p[] as const clk: hisilicon: Mark phase_ops static clk: hi3798cv200: add emmc sample and drive clock clk: hisilicon: add hisi phase clock support clk: hi3798cv200: add COMBPHY0 clock support clk: hi3798cv200: fix define indentation clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK clk: hi3798cv200: correct IR clock parent clk: hi3798cv200: fix unregister call sequence in error path * clk-allwinner: clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU clk: sunxi-ng: add support for the Allwinner H6 CCU dt-bindings: add device tree binding for Allwinner H6 main CCU clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate clk: sunxi-ng: h3: h5: Add minimal rate for video PLL clk: sunxi-ng: Add check for minimal rate to NM PLLs clk: sunxi-ng: Use u64 for calculation of nkmp rate clk: sunxi-ng: Mask nkmp factors when setting register clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name * clk-ux500: clk: ux500: Drop AB8540/9540 support * clk-renesas: (27 commits) clk: renesas: cpg-mssr: Adjust r8a77980 ifdef clk: renesas: rcar-gen3: Always use readl()/writel() clk: renesas: sh73a0: Always use readl()/writel() clk: renesas: rza1: Always use readl()/writel() clk: renesas: rcar-gen2: Always use readl()/writel() clk: renesas: r8a7740: Always use readl()/writel() clk: renesas: r8a73a4: Always use readl()/writel() clk: renesas: mstp: Always use readl()/writel() clk: renesas: div6: Always use readl()/writel() clk: fix false-positive Wmaybe-uninitialized warning clk: renesas: r8a77965: Replace DU2 clock clk: renesas: cpg-mssr: Add support for R-Car M3-N clk: renesas: cpg-mssr: add R8A77980 support dt-bindings: clock: add R8A77980 CPG core clock definitions clk: renesas: r8a7792: Add rwdt clock clk: renesas: r8a7794: Add rwdt clock clk: renesas: r8a7791/r8a7793: Add rwdt clock clk: renesas: r8a7790: Add rwdt clock clk: renesas: r8a7745: Add rwdt clock clk: renesas: r8a7743: Add rwdt clock ...
2018-03-20clk: mediatek: add audsys support for MT2701Ryder Lee
Add clock driver support for MT2701 audsys. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20clk: mediatek: add devm_of_platform_populate() for MT7622 audsysRyder Lee
Add devm_of_platform_populate() to populate devices which are children of the root node. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: mediatek: update clock driver of MT2712Weiyi Lu
According to ECO design change, 1. add new clock mux data and change some 2. add new clock gate data and clock factor data 3. change status register offset of infra subsystem Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: mediatek: update missing clock data for MT7622 audsysRyder Lee
Add missing clock data 'CLK_AUDIO_AFE_CONN' for MT7622 audsys. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: mediatek: fix PWM clock source by adding a fixed-factor clockSean Wang
The clock for which all PWM devices on MT7623 or MT2701 actually depending on has to be divided by four from its parent clock axi_sel in the clock path prior to PWM devices. Consequently, adding a fixed-factor clock axisel_d4 as one-fourth of clock axi_sel allows that PWM devices can have the correct resolution calculation. Cc: stable@vger.kernel.org Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-01-10clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being builtSean Wang
Changes from v1->v2: Add 'select RESET_CONTROLLER' under COMMON_CLK_MEDIATEK and enable reset.c to be built when COMMON_CLK_MEDIATEK is selected. That should be quite reasonable because the reset controller is tightly embedded inside and exported from these clock subsystems. At least it can be found on infracfg and pericfg subsystem that both are really fundamental block lots of devices must depend on. commit 74cb0d6dde8 ("clk: mediatek: fixup test-building of MediaTek clock drivers") can let the build system looking into the directory where the clock drivers resides and then allow test-building the drivers. But the change also gives rise to certain incorrect behavior which is reset.c being built even not depending on either COMPILE_TEST or ARCH_MEDIATEK alternative dependency. To get rid of reset.c being built unexpectedly on the other platforms, it would be a good change that the file should be built depending on its own specific configuration rather than just on generic RESET_CONTROLLER one. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-26clk: mediatek: Fix all warnings for missing struct clk_onecell_dataSean Wang
Even though the header file linux/clk-provider.h is already being properly included in clk-mtk.h, the definition of struct clk_onecell_data still must depend on CONFIG_COMMON_CLK defined and thus it's possible that below build warnings occur when CONFIG_COMMON_CLK is not being selected. Therefore, these functions which need struct clk_onecell_data without declaring that structure first requires simply declaring that this struct exists prior to referencing it in clk-mtk.h Changes from v1->v2: enhance v1 based on two useful solutions Jean Delvare kindly suggested. All warnings (new ones prefixed by >>): In file included from drivers/clk/mediatek/reset.c:22:0: >>drivers/clk/mediatek/clk-mtk.h:44:19: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration int num, struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ drivers/clk/mediatek/clk-mtk.h:63:19: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration int num, struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ drivers/clk/mediatek/clk-mtk.h:145:10: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ drivers/clk/mediatek/clk-mtk.h:164:11: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ drivers/clk/mediatek/clk-mtk.h:190:12: warning: 'struct clk_onecell_data' declared inside parameter list will not be visible outside of this definition or declaration struct clk_onecell_data *clk_data); ^~~~~~~~~~~~~~~~ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: kbuild-all@01.org Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Jean Delvare <jdelvare@suse.de> Cc: linux-clk@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21clk: mediatek: group drivers under indpendent menuSean Wang
Getting much MediaTek clock driver have been added to CCF, so it's better adding the cleanup for grouping drivers under the independent menu to simplify configuration selection. In addition, really trivial fixups for typos are added in the same patch. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have two changes to the core framework this time around. The first being a large change that introduces runtime PM support to the clk framework. Now we properly call runtime PM operations on the device providing a clk when the clk is in use. This helps on SoCs where the clks provided by a device need something to be powered on before using the clks, like power domains or regulators. It also helps power those things down when clks aren't in use. The other core change is a devm API addition for clk providers so we can get rid of a bunch of clk driver remove functions that are just doing of_clk_del_provider(). Outside of the core, we have the usual addition of clk drivers and smattering of non-critical fixes to existing drivers. The biggest diff is support for Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch of data. By the way, we're trying something new here where we build the tree up with topic branches. We plan to work this into our workflow so that we don't step on each other's toes, and so the fixes branch can be merged on an as-needed basis. Summary: Core: - runtime PM support for clk providers - devm API for of_clk_add_hw_provider() New Drivers: - Mediatek MT2712 and MT7622 - Renesas R-Car V3M SoC Updates: - runtime PM support for Samsung exynos5433/exynos4412 providers - removal of clkdev aliases on Samsung SoCs - convert clk-gpio to use gpio descriptors - various driver cleanups to match kernel coding style - Amlogic Video Processing Unit VPU and VAPB clks - sigma-delta modulation for Allwinner audio PLLs - Allwinner A83t Display clks - support for the second display unit clock on Renesas RZ/G1E - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR - new clock ids for Rockchip rk3188 and rk3368 SoCs - various 'const' markings on clk_ops structures - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: stm32h7: fix test of clock config clk: pxa: fix building on older compilers clk: sunxi-ng: a83t: Fix i2c buses bits clk: ti: dra7-atl-clock: fix child-node lookups clk: qcom: common: fix legacy board-clock registration clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: kona-setup: Delete error messages for failed memory allocations ARC: clk: fix spelling mistake: "configurarion" -> "configuration" clk: cdce925: remove redundant check for non-null parent_name clk: versatile: Improve sizeof() usage clk: versatile: Delete error messages for failed memory allocations clk: ux500: Improve sizeof() usage clk: ux500: Delete error messages for failed memory allocations clk: spear: Delete error messages for failed memory allocations clk: ti: Delete error messages for failed memory allocations clk: mmp: Adjust checks for NULL pointers ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02clk: mediatek: add clock support for MT7622 SoCSean Wang
Add all supported clocks exported from every susbystem found on MT7622 SoC such as topckgen, apmixedsys, infracfg, pericfg , pciessys, ssusbsys, ethsys and audsys. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02clk: mediatek: add the option for determining PLL source clockChen Zhong
Since the previous setup always sets the PLL using crystal 26MHz, this doesn't always happen in every MediaTek platform. So the patch added flexibility for assigning extra member for determining the PLL source clock. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02clk: mediatek: mark mtk_infrasys_init_early __initArnd Bergmann
On gcc-4.6, we get a harmless link-time warning: WARNING: vmlinux.o(.text.unlikely+0x196a0): Section mismatch in reference from the function mtk_infrasys_init_early() to the function .init.text:mtk_clk_register_cpumuxes() The function mtk_infrasys_init_early() references the function __init mtk_clk_register_cpumuxes(). This is often because mtk_infrasys_init_early lacks a __init annotation or the annotation of mtk_clk_register_cpumuxes is wrong. Newer compilers inline this function so they don't warn, but marking it __init is the right solution for all versions. Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02clk: mediatek: Add MT2712 clock supportweiyi.lu@mediatek.com
Add MT2712 clock support, include topckgen, apmixedsys, infracfg, pericfg, mcucfg and subsystem clocks. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> [sboyd@codeaurora.org: Static on top_clk_data] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 01:40:43 +0000