summaryrefslogtreecommitdiff
path: root/drivers/clk/clk-wm831x.c
AgeCommit message (Collapse)Author
2014-09-25clk: Remove .owner field for driverKiran Padwal
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-02clk: wm831x: get rid of the implementation of remove functionLaxman Dewangan
The remove function implemented for platform driver's remove callback just return 0 as part of its implementation. Remove this APIs and do not pass the valid .remove for platform driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk: wm831x: Initialise wm831x pointer on initMark Brown
Otherwise any attempt to interact with the hardware will crash. This is what happens when drivers get written blind. Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-29clk: wm831x: Provide is_prepared() rather than is_enabled()Mark Brown
Since the driver was written an is_prepared() operation has been made possible. Since the driver uses I2C I/O only prepare operations are provided so move the is_enabled() operation over to is_prepared(). Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-30clk: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-28clk: wm831x: Fix wm831x_clkout_get_parentAxel Lin
Current code looks strange because calling wm831x_clkout_set_parent() with 0 as parent parameter, wm831x_clkout_get_parent() will return 1. According to the datasheet: R16528 (4090h) Clock Control1 BIT 0: CLKOUT output source select 0 = FLL output 1 = 32.768kHz oscillator Thus fix the entry order in wm831x_clkout_parents[] to make it has the same meaning as the datasheet and make the return value of wm831x_clkout_get_parent() consistent with the parent pass to wm831x_clkout_set_parent(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-28clk: wm831x: Fix update wrong register for enable/disable FLLAxel Lin
According to the datasheet, FLL Enable is controlled by R16530 (4092h) FLL Control1 BIT 0: FLL Enable 0 = Disable 1 = Enable Thus the code should update WM831X_FLL_CONTROL_1 register rather than WM831X_FLL_CONTROL_2 register. Also fixes a trivial typo in dev_crit message. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-12-11Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-11-28clk: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28clk: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28clk: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29clk: wm831x: Use devm_clk_register() to simplify codeStephen Boyd
Move this driver to use devm_clk_register() to simplify some error paths and reduce lines of code. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-10-29clk: wm831x: Fix clk_register() error code checkingStephen Boyd
clk_register() returns an ERR_PTR upon failure, not NULL. Fix these error paths. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-11clk: wm831x: Add initial WM831x clock driverMark Brown
The WM831x and WM832x series of PMICs contain a flexible clocking subsystem intended to provide always on and system core clocks. It features: - A 32.768kHz crystal oscillator which can optionally be used to pass through an externally generated clock. - A FLL which can be clocked from either the 32.768kHz oscillator or the CLKIN pin. - A CLKOUT pin which can bring out either the oscillator or the FLL output. - The 32.768kHz clock can also optionally be brought out on the GPIO pins of the device. This driver fully supports the 32.768kHz oscillator and CLKOUT. The FLL is supported only in AUTO mode, the full flexibility of the FLL cannot currently be used. Due to a lack of access to systems where the core SoC has been converted to use the generic clock API this driver has been compile tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>