summaryrefslogtreecommitdiff
path: root/drivers/clk/at91
AgeCommit message (Collapse)Author
2020-01-31Merge branches 'clk-uniphier', 'clk-warn-critical', 'clk-ux500', ↵Stephen Boyd
'clk-kconfig' and 'clk-at91' into clk-next - Warn about critical clks that fail to enable or prepare - Detect more PRMCU variants in ux500 driver * clk-uniphier: clk: uniphier: Add SCSSI clock gate for each channel * clk-warn-critical: clk: Warn about critical clks that fail to enable clk: Don't try to enable critical clocks if prepare failed clk: tegra: Fix double-free in tegra_clk_init() clk: samsung: exynos5420: Keep top G3D clocks enabled clk: qcom: Avoid SMMU/cx gdsc corner cases clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs clk: Move clk_core_reparent_orphans() under CONFIG_OF clk: at91: fix possible deadlock clk: walk orphan list on clock provider registration clk: imx: pll14xx: fix clk_pll14xx_wait_lock clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table clk: imx: clk-composite-8m: add lock to gate/mux * clk-ux500: clk: ux500: Fix up the SGA clock for some variants * clk-kconfig: clk: Fix Kconfig indentation * clk-at91: clk: at91: sam9x60: fix programmable clock prescaler clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default value
2020-01-05clk: at91: sam9x60: fix programmable clock prescalerEugen Hristev
The prescaler works as parent rate divided by (PRES + 1) (is_pres_direct == 1) It does not work in the way of parent rate shifted to the right by (PRES + 1), which means division by 2^(PRES + 1) (is_pres_direct == 0) Thus is_pres_direct must be enabled for this SoC, to make the right computation. This field was added in commit 45b06682113b ("clk: at91: fix programmable clock for sama5d2") SAM9X60 has the same field as SAMA5D2 in the PCK Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1575977088-16781-1-git-send-email-eugen.hristev@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-05clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default valueEugen Hristev
Product datasheet recommends different values for UPLL and PLLA analog control register. Adapt accordingly. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1573478913-19737-1-git-send-email-eugen.hristev@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-16clk: at91: fix possible deadlockAlexandre Belloni
Lockdep warns about a possible circular locking dependency because using syscon_node_to_regmap() will make the created regmap get and enable the first clock it can parse from the device tree. This clock is not needed to access the registers and should not be enabled at that time. Use the recently introduced device_node_to_regmap to solve that as it looks up the regmap in the same list but doesn't care about the clocks. Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20191128102531.817549-1-alexandre.belloni@bootlin.com Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-01Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This merge window we have one small clk provider API in the core framework and then a bunch of driver updates and a handful of new drivers. In terms of diffstat the Qualcomm and Amlogic drivers are high up there because of all the clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work done this cycle too to support suspend/resume and memory controllers. And the OMAP clk driver got proper clk and reset handling in place. Rounding out the patches are various updates to remove unused data, mark things static, correct incorrect data in drivers, etc. All the little things that improve drivers and maintain code health. I will point out that there's a patch in here for the GPIO clk driver, that almost nobody uses, which changes behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent. Other than that things are fairly well SoC specific here. Core: - Add a clk provider API to get current parent index - Plug a memory leak in clk_unregister() path New Drivers: - CGU in Ingenix X1000 - Bitmain BM1880 clks - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC - Add support for the Renesas RZ/G2N (r8a774b1) SoC - Add Tegra20/30 External Memory Clock (EMC) support Updates: - Make gpio gate clks propagate rate setting up to parent - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() - Use struct_size() some more in various clk drivers - Improve Rockchip px30 clk tree - Add suspend/resume support to Tegra210 clk driver - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP - Allwinner DT exports and H6 clk tree fixes - Proper clk and reset handling for OMAP SoCs - Revamped TI divider clk to clamp max divider - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used - Add VIDEO2_PLL clock for imx8mq - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs - Add sm1 support in the Amlogic audio clock controller - Switch some clocks on R-Car Gen2/3 to .determine_rate() - Remove Renesas R-Car Gen2 legacy DT clock support - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3 - Improve Renesas R-Car Gen3 SD clock handling - Add rate table for Samsung exynos542x GPU and VPLL clks - Fix potential CPU performance degradation after system suspend/resume cycle on exynos542x SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits) clk: aspeed: Add RMII RCLK gates for both AST2500 MACs MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers clk: ingenic: Allow drivers to be built with COMPILE_TEST MAINTAINERS: Update section for Ux500 clock drivers clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. clk: tegra: Use match_string() helper to simplify the code clk: pxa: fix one of the pxa RTC clocks clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() clk: armada-xp: remove unused code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 ...
2019-11-08drivers/clk: convert VL struct to struct_sizeStephen Kitt
There are a few manually-calculated variable-length struct allocations left, this converts them to use struct_size. Found with the following git grep command git grep -A1 'kzalloc.*sizeof[^_].*+' Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lkml.kernel.org/r/20190927185110.29897-1-steve@sk2.org Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> [sboyd@kernel.org: Add grep command] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-28clk: at91: avoid sleeping earlyAlexandre Belloni
It is not allowed to sleep to early in the boot process and this may lead to kernel issues if the bootloader didn't prepare the slow clock and main clock. This results in the following error and dump stack on the AriettaG25: bad: scheduling from the idle thread! Ensure it is possible to sleep, else simply have a delay. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20190920153906.20887-1-alexandre.belloni@bootlin.com Fixes: 80eded6ce8bb ("clk: at91: add slow clks driver") Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-03clk: at91: sam9x60: fix programmable clockEugen Hristev
The prescaler mask for sam9x60 must be 0xff (8 bits). Being set to 0, means that we cannot set any prescaler, thus the programmable clocks do not work (except the case with prescaler 0) Set the mask accordingly in layout struct. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1569321191-27606-1-git-send-email-eugen.hristev@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-20Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...
2019-09-17clk: at91: allow 24 Mhz clock as input for PLLEugen Hristev
The PLL input range needs to be able to allow 24 Mhz crystal as input Update the range accordingly in plla characteristics struct Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568183622-7858-1-git-send-email-eugen.hristev@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: c561e41ce4d2 ("clk: at91: add sama5d2 PMC driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-16clk: at91: select parent if main oscillator or bypass is enabledEugen Hristev
Selecting the right parent for the main clock is done using only main oscillator enabled bit. In case we have this oscillator bypassed by an external signal (no driving on the XOUT line), we still use external clock, but with BYPASS bit set. So, in this case we must select the same parent as before. Create a macro that will select the right parent considering both bits from the MOR register. Use this macro when looking for the right parent. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568042692-11784-2-git-send-email-eugen.hristev@microchip.com Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-16clk: at91: fix update bit maps on CFG_MOR writeEugen Hristev
The regmap update bits call was not selecting the proper mask, considering the bits which was updating. Update the mask from call to also include OSCBYPASS. Removed MOSCEN which was not updated. Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568042692-11784-1-git-send-email-eugen.hristev@microchip.com Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-22clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1Codrin Ciubotariu
In clk_generated_determine_rate(), if the divisor is greater than GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned. If clk_generated_set_rate() will be called later with this wrong rate, it will return -EINVAL, so the generated clock won't change its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1. Fixes: 8c7aa6328947 ("clk: at91: clk-generated: remove useless divisor loop") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-27clk: at91: sckc: use dedicated functions to unregister clockClaudiu Beznea
Use at91 specific functions to free all resources in case of error. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: improve error path for sama5d4 sck registrationClaudiu Beznea
Improve error path for sama5d4 sck registration. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: remove unnecessary lineClaudiu Beznea
Remove unnecessary line. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: improve error path for sam9x5 sck registerClaudiu Beznea
Improve error path for sam9x5 slow clock registration. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow clock osclillatorClaudiu Beznea
Add support to free slow clock oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow rc oscillatorClaudiu Beznea
Add support to free slow rc oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-27clk: at91: sckc: add support to free slow oscillatorClaudiu Beznea
Add support to free slow oscillator resources. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: at91: sckc: add support for SAM9X60Claudiu Beznea
Add support for SAM9X60's slow clock. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: at91: sckc: add support to specify registers bit offsetsClaudiu Beznea
Different IPs uses different bit offsets in registers for the same functionality, thus adapt the driver to support this. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-26clk: at91: sckc: sama5d4 has no bypass supportClaudiu Beznea
The slow clock of SAMA5D4 has no bypass support thus remove it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' ↵Stephen Boyd
and 'clk-spdx' into clk-next - Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
2019-04-25clk: at91: Mark struct clk_range as constStephen Boyd
It's just some static data that doesn't get changed after being used. Mark it const everywhere. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: add sam9x60 pmc driverAlexandre Belloni
Add a driver for the PMC clocks of the sam9c60. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Staticize spinlock] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: add sam9x60 PLL driverAlexandre Belloni
The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: master: Add sam9x60 supportAlexandre Belloni
The sam9x60 cpu clock is located at a different offset but is otherwise similar to the master clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: usb: Add sam9x60 supportAlexandre Belloni
The sam9x60 USB clock supports four different parents, ensure they can be selected. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: allow configuring generated PCR layoutAlexandre Belloni
The PCR register layout for GCLKCSS is changing for the future SoCs, allow configuring it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: allow configuring peripheral PCR layoutAlexandre Belloni
The PCR register actually changed layout for each SoC. By chance, this didn't have impact on sama5d[2-4] support but since sama5d3, PID is seven bits wide and sama5d4 and sama5d2 don't have DIV. For the DT backward compatibility, keep the layout as is. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: sckc: handle different RC startup timeAlexandre Belloni
The sama5d3 slow RC oscillator as a different startup time than all the previous SoCs. Handle that using its own compatible. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: modernize sckc bindingAlexandre Belloni
Remove the need for child nodes in the sckc binding and register the whole sckc tree (3 clocks in total) from the sckc node. DT backward compatibility is kept by looking for properties in child nodes when they are not present in the sckc node. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-18clk: at91: fix programmable clock for sama5d2Matthias Wieloch
The prescaler formula of the programmable clock has changed for sama5d2. Update the driver accordingly. Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [nicolas.ferre@microchip.com: adapt the prescaler range, fix clk_programmable_recalc_rate, split patch] Signed-off-by: Matthias Wieloch <matthias.wieloch@few-bauer.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-08Merge branch 'clk-at91' into clk-nextStephen Boyd
* clk-at91: clk: at91: programmable: remove unneeded register read clk: at91: optimize clk_round_rate() for AUDIO_PLL clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2
2019-02-25clk: at91: programmable: remove unneeded register readNicolas Ferre
This register read is a leftover of a previous read/modify/write. We now use regmap_update_bits(), so we don't need it anymore. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: at91: optimize clk_round_rate() for AUDIO_PLLMichał Mirosław
Stop the search for parent rate when exact match is found. This makes for 3 clk_round_rate() calls instead of 64 of them on SAMA5D2-based board when searching for 12.288MHz clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-20clk: at91: fix masterck nameAlexandre Belloni
The master clock is actually named masterck earlier in the driver. Having "mck" in the parent list means that it can never be selected. Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver") Fixes: a2038077de9a ("clk: at91: add sama5d2 PMC driver") Fixes: 084b696bb509 ("clk: at91: add sama5d4 pmc driver") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-20clk: at91: fix at91sam9x5 peripheral clock numberAlexandre Belloni
nck() looks at the last id in an array and unfortunately, at91sam9x35_periphck has a sentinel, hence the id is 0 and the calculated number of peripheral clocks is 1 instead of a maximum of 31. Fixes: 1eabdc2f9dd8 ("clk: at91: add at91sam9x5 PMCs driver") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2Michał Mirosław
Datasheet for SAMA5D2x mentions 6 sources for PCKx, the last being AUDIOPLL. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18Merge branches 'clk-actions-reset', 'clk-imx7-init-critical', 'clk-mmp2-ids' ↵Stephen Boyd
and 'clk-at91-pmc-rework' into clk-next - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs - Rework at91 PMC clock driver for new DT bindings * clk-actions-reset: clk: actions: Add Actions Semi S900 SoC Reset Management Unit support clk: actions: Add Actions Semi S700 SoC Reset Management Unit support clk: actions: Add Actions Semi Owl SoCs Reset Management Unit support dt-bindings: reset: Add binding constants for Actions Semi S900 RMU dt-bindings: reset: Add binding constants for Actions Semi S700 RMU dt-bindings: clock: Add reset controller bindings for Actions Semi Owl SoCs clk: actions: Cache regmap info in private clock descriptor * clk-imx7-init-critical: clk: imx7d: remove CLK_IS_CRITICAL flag for arm_a7_root_clk clk: imx: cpu clock should be always critical clk: imx: imx7d: remove clks_init_on array clk: imx: imx7d: remove unnecessary clocks from clks_init_on array * clk-mmp2-ids: clk: mmp2: fix the clock id for sdh2_clk and sdh3_clk * clk-at91-pmc-rework: clk: at91: move DT compatibility code to its own file clk: at91: add at91sam9rl PMC driver clk: at91: add at91sam9x5 PMCs driver clk: at91: add at91sam9260 PMC driver clk: at91: add sama5d2 PMC driver clk: at91: add sama5d4 pmc driver clk: at91: add new DT lookup function dt-bindings: clk: at91: Document new PMC binding clk: at91: add pmc_data struct and helpers clk: at91: allow clock registration from C code clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated() clk: at91: audio-pll: separate registration from DT parsing clk: at91: h32mx: separate registration from DT parsing clk: at91: generated: SSCs don't have a gclk clk: at91: audio-pll: fix audio pmc type
2018-10-17clk: at91: move DT compatibility code to its own fileAlexandre Belloni
Move all the DT backward compatibility code to its own file so it can be deleted later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9rl PMC driverAlexandre Belloni
Add a driver for the PMC clocks of the at91sam9rl SoC. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9x5 PMCs driverAlexandre Belloni
Add a driver for the PMC clocks of the at91sam9x5 SoCs Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add at91sam9260 PMC driverAlexandre Belloni
Add a driver for the PMC clocks of the at91sam9260, at91sam9261, at91am9263 and at91sam9g20 SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add sama5d2 PMC driverAlexandre Belloni
Add a driver for the PMC clocks of the sama5d2 Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add sama5d4 pmc driverAlexandre Belloni
Add a driver for the PMC clocks of the sama5d4 Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Make i signed to fix signedness bug] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: add new DT lookup functionAlexandre Belloni
Add a new DT lookup function to lookup for PMC clocks. Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the platforms are converted. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 13:44:59 +0000