summaryrefslogtreecommitdiff
path: root/drivers/clk/at91/pmc.h
AgeCommit message (Collapse)Author
2017-12-21clk: at91: pmc: Support backup for programmable clocksRomain Izard
When an AT91 programmable clock is declared in the device tree, register it into the Power Management Controller driver. On entering suspend mode, the driver saves and restores the Programmable Clock registers to support the backup mode for these clocks. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-29clk: at91: Add sama5d2 suspend/resumeAlexandre Belloni
On sama5d2, VDD core maybe be cut while in suspend. This means registers will be lost. Ensure they are saved and restored properly. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-17clk: at91: pmc: move pmc structures to C fileAlexandre Belloni
pmc.c is now the only user of struct at91_pmc*, move their definition in the C file. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-17clk: at91: remove IRQ handling and use pollingAlexandre Belloni
The AT91 clock drivers make use of IRQs to avoid polling when waiting for some clocks to be enabled. Unfortunately, this leads to a crash when those IRQs are threaded (which happens when using preempt-rt) because they are registered before thread creation is possible. Use polling on those clocks instead to avoid the problem. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-17clk: at91: make use of syscon/regmap internallyBoris Brezillon
Use the regmap coming from syscon to access the registers instead of using pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to the child nodes of the PMC. The final benefit is to have each clock register itself instead of having to iterate over the children. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-17clk: at91: make use of syscon to share PMC registers in several driversBoris Brezillon
The PMC block is providing several functionnalities: - system clk management - cpuidle - platform suspend Replace the void __iomem *regs field by a regmap (retrieved using syscon) so that we can later share the regmap across several drivers without exporting a new specific API or a global void __iomem * variable. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01clk: at91: add generated clock driverNicolas Ferre
Add a new type of clocks that can be provided to a peripheral. In addition to the peripheral clock, this new clock that can use several input clocks as parents can generate divided rates. This would allow a peripheral to have finer grained clocks for generating a baud rate, clocking an asynchronous part or having more options in frequency. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [sboyd@codeaurora.org: Transition to new clk_hw provider APIs] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07clk: at91: Silence warnings and cleanup __init/extern usageStephen Boyd
Remove useless ifdefs around function prototypes to silence the following sparse warnings when the configs aren't enabled. drivers/clk/at91/clk-h32mx.c:95:13: warning: symbol 'of_sama5d4_clk_h32mx_setup' was not declared. Should it be static? drivers/clk/at91/clk-utmi.c:159:13: warning: symbol 'of_at91sam9x5_clk_utmi_setup' was not declared. Should it be static? Plus, using __init and extern in function prototypes doesn't do anything, so just drop it throughout this file. Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-19Merge branch 'ccf/atmel-fixes-for-4.1' of ↵Michael Turquette
https://github.com/bbrezillon/linux-at91 into clk-fixes
2015-06-19clk: at91: fix h32mx prototype inclusion in pmc headerNicolas Ferre
Trivial fix that prevents to compile this pmc clock driver if h32mx clock is present but smd clock isn't. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: bcc5fd49a0fd ("clk: at91: add a driver for the h32mx clock") Cc: <stable@vger.kernel.org> # 3.18+
2015-03-04clk: at91: implement suspend/resume for the PMC irqchipBoris BREZILLON
The irq line used by the PMC block is shared with several peripherals including the init timer which is registering its handler with IRQF_NO_SUSPEND. Implement the appropriate suspend/resume callback for the PMC irqchip, and inform irq core that PMC irq handler can be safely called while the system is suspended by setting IRQF_COND_SUSPEND. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22clk: at91: add a driver for the h32mx clockAlexandre Belloni
Newer SoCs have two different AHB interconnect. The AHB 32 bits Matrix interconnect (h32mx) has a clock that can be setup at the half of the h64mx clock (which is mck). The h32mx clock can not exceed 90 MHz. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07clk: at91: add slow clks driverBoris BREZILLON
AT91 slow clk is a clk multiplexer. In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can choose among 2 sources: an internal RC oscillator circuit and an oscillator using an external crystal. In other Socs (sam9260 family) the multiplexer source is hardcoded with the OSCSEL signal. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07clk: at91: rework main clk implementationBoris BREZILLON
AT91 main clk is a clk multiplexer and not a simple fixed rate clk as currently implemented. In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can choose among 2 sources: an internal RC oscillator circuit and an oscillator using an external crystal. In other Socs (sam9260, rm9200 families) the multiplexer source is hardcoded to the external crystal oscillator. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-12ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration optionNicolas Ferre
This AT91 specific Kconfig option removed the code that dealt with programmable clocks. Each AT91 SoC embeds programmable clocks and there is little gain to remove this code in case that such a clock is not used. If this option is not selected, it causes certain drivers to fail to build. We simply remove this option instead of adding code just to build a workaround. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-02clk: at91: add PMC smd clockBoris BREZILLON
This patch adds at91 smd (Soft Modem) clock implementation using common clk framework. Not used by any driver right now. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC usb clockBoris BREZILLON
This patch adds new at91 usb clock implementation using common clk framework. This clock is used to clock usb ports (ohci, ehci and udc). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC utmi clockBoris BREZILLON
This adds new at91 utmi clock implementation using common clk framework. This clock is a pll with a fixed factor (x40). It is used as a source for usb clock. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC programmable clocksBoris BREZILLON
This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC peripheral clocksBoris BREZILLON
This patch adds new at91 peripheral clock implementation using common clk framework. Almost all peripherals provided by at91 SoCs need a clock to work properly. This clock is enabled/disabled using PCER/PCDR resgisters. Each peripheral is given an id (see atmel's datasheets) which is used to define and reference peripheral clocks. Some new SoCs (at91sam9x5 and sama5d3) provide a new register (PCR) where you can configure the peripheral clock as a division of the master clock. This will help reducing the peripherals power comsumption. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC system clocksBoris BREZILLON
This patch adds new at91 system clock implementation using common clk framework. Some peripherals need to enable a "system" clock in order to work properly. Each system clock is given an id based on the bit position in SCER/SCDR registers. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC master clockBoris BREZILLON
This patch adds new at91 master clock implementation using common clk framework. The master clock layout describe the MCKR register layout. There are 2 master clock layouts: - at91rm9200 - at91sam9x5 Master clocks are given characteristics: - min/max clock output rate These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC pll clocksBoris BREZILLON
This patch adds new at91 pll clock implementation using common clk framework. The pll clock layout describe the PLLX register layout. There are four pll clock layouts: - at91rm9200 - at91sam9g20 - at91sam9g45 - sama5d3 PLL clocks are given characteristics: - min/max clock source rate - ranges of valid clock output rates - values to set in out and icpll fields for each supported output range These characteristics are checked during rate change to avoid over/underclocking. These characteristics are described in atmel's SoC datasheet in "Electrical Characteristics" paragraph. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC main clockBoris BREZILLON
This patch adds new at91 main oscillator clock implementation using common clk framework. If rate is not provided during clock registration it is calculated using the slow clock (main clk parent in this case) rate and MCFR register. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC base supportBoris BREZILLON
This patch adds at91 PMC (Power Management Controller) base support. All at91 clocks managed by the PMC unit will use this framework. This framework provides the following fonctionalities: - define a new struct at91_pmc to hide PMC internals (lock, PMC memory mapping, irq domain, ...) - read/write helper functions (pmc_read/write) to access PMC registers - lock/unlock helper functions (pmc_lock/unlock) to lock/unlock access to pmc registers - a new irq domain and its associated irq chip to request PMC specific interrupts (useful for clk prepare callbacks) The PMC unit is declared as a dt clk provider (CLK_OF_DECLARE), and every clk using this framework will declare a table of of_at91_clk_init_cb_t and add it to the pmc_clk_ids table. When the pmc dt clock setup function is called (by of_clk_init function), it triggers the registration of every supported child clk (those matching the definitions in pmc_clk_ids). This patch copies at91_pmc_base (memory mapping) and at91sam9_idle (function) from arch/arm/mach-at91/clock.c (which is not compiled if COMMON_CLK_AT91 is enabled). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>