summaryrefslogtreecommitdiff
path: root/drivers/clk/actions
AgeCommit message (Collapse)Author
2021-06-27clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoCCristian Ciocaltea
Add support for the missing NIC and ETHERNET clocks in the Actions Semi Owl S500 SoC clock driver. Additionally, change APB clock parent from AHB to the newly added NIC. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/d62e4f1f85c5cef05be14d9e8143e88bbddd2e0f.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoCCristian Ciocaltea
There are a few issues with the setup of the Actions Semi Owl S500 SoC's clock chain involving AHPPREDIV, H and AHB clocks: * AHBPREDIV clock is defined as a muxer only, although it also acts as a divider. * H clock is using a wrong divider register offset * AHB is defined as a multi-rate factor clock, but it is actually just a fixed pass clock. Let's provide the following fixes: * Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition. * Use the correct register shift value in the OWL_DIVIDER definition for H clock * Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an ungated OWL_COMP_FIXED_FACTOR definition. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoCCristian Ciocaltea
The following clocks of the Actions Semi Owl S500 SoC have been defined to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE, VDE, BISP, SENSOR[0-1] There are several issues involved in this approach: * 'bisp_factor_table[]' describes the configuration of a regular 8-rates divider, so its usage is redundant. Additionally, judging by the BISP clock context, it is incomplete since it maps only 8 out of 12 possible entries. * The clocks mentioned above are not identical in terms of the available rates, therefore cannot rely on the same factor table. Specifically, BISP and SENSOR* are standard 12-rate dividers so their configuration should rely on a proper clock div table, while VCE and VDE require a factor table that is a actually a subset of the one needed for DE[1-2] clocks. Let's fix this by implementing the following: * Add new factor tables 'de_factor_table' and 'hde_factor_table' to properly handle DE[1-2], VCE and VDE clocks. * Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1] clocks converted to OWL_COMP_DIV. * Drop the now unused 'bisp_factor_table[]'. Additionally, drop the CLK_IGNORE_UNUSED flag for SENSOR[0-1] since there is no reason to always keep ON those clocks. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/e675820a46cd9930d8d576c6cae61d41c1a8416f.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: actions: Fix SD clocks factor table on Owl S500 SoCCristian Ciocaltea
Drop the unsupported entries in the factor table used for the SD[0-2] clocks definitions on the Actions Semi Owl S500 SoC. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/196c948d708a22b8198c95f064a0f6b6820f9980.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27clk: actions: Fix UART clock dividers on Owl S500 SoCCristian Ciocaltea
Use correct divider registers for the Actions Semi Owl S500 SoC's UART clocks. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/4714d05982b19ac5fec2ed74f54be42d8238e392.1623354574.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: actions: Add Actions S500 SoC Reset Management Unit supportCristian Ciocaltea
Add Reset Management Unit (RMU) support for Actions Semi S500 SoC. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/3fba2e6f0edfac97cb8c6ce60f95c24852578eac.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoCCristian Ciocaltea
Add support for the missing APB, DMAC and GPIO clocks in the Actions Semi S500 SoC clock driver. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/87964ae012e513597b8b4c7be2e7ac332a70087a.1593788312.git.cristian.ciocaltea@gmail.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21clk: actions: Fix h_clk for Actions S500 SoCCristian Ciocaltea
The h_clk clock in the Actions Semi S500 SoC clock driver has an invalid parent. Replace with the correct one. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/c57e7ebabfa970014f073b92fe95b47d3e5a70b1.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-19Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and ↵Stephen Boyd
'clk-actions' into clk-next - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Evict parents from parent cache when they're unregistered * clk-cdce-regulator: clk: clk-cdce925: Add regulator support dt-bindings: clock: cdce925: Add regulator documentation * clk-bcm: clk: bcm2835: Mark PLLD_PER as CRITICAL clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support clk: bcm2835: Introduce SoC specific clock registration dt-bindings: bcm2835-cprman: Add bcm2711 support * clk-evict-parent-cache: clk: Evict unregistered clks from parent caches * clk-actions: clk: actions: Fix factor clk struct member access
2019-09-17clk: actions: Fix factor clk struct member accessManivannan Sadhasivam
Since the helper "owl_factor_helper_round_rate" is shared between factor and composite clocks, using the factor clk specific helper function like "hw_to_owl_factor" to access its members will create issues when called from composite clk specific code. Hence, pass the "factor_hw" struct pointer directly instead of fetching it using factor clk specific helpers. This issue has been observed when a composite clock like "sd0_clk" tried to call "owl_factor_helper_round_rate" resulting in pointer dereferencing error. While we are at it, let's rename the "clk_val_best" function to "owl_clk_val_best" since this is an owl SoCs specific helper. Fixes: 4bb78fc9744a ("clk: actions: Add factor clock support") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190916154546.24982-2-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-16clk: actions: Don't reference clk_init_data after registrationStephen Boyd
A future patch is going to change semantics of clk_register() so that clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid referencing this member here so that we don't run into NULL pointer exceptions. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190731193517.237136-2-sboyd@kernel.org [sboyd@kernel.org: Move name to after checking for error or NULL hw] Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-01clk: actions: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Actions Semi Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: actions: Add clock driver for S500 SoCManivannan Sadhasivam
Add common clock driver for Actions Semi S500 SoC. Signed-off-by: Edgar Bernardi Righi <edgar.righi@lsitec.org.br> [Mani: cleaned up the driver] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: actions: Add configurable PLL delayManivannan Sadhasivam
S500 SoC requires configurable delay for different PLLs. Hence, add a separate macro for declaring a PLL with configurable delay and also modify the existing OWL_PLL_NO_PARENT macro to use default delay so that no need to modify the existing S700/S900 drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: actions: Add Actions Semi S900 SoC Reset Management Unit supportManivannan Sadhasivam
Add Reset Management Unit (RMU) support for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: actions: Add Actions Semi S700 SoC Reset Management Unit supportManivannan Sadhasivam
Add Reset Management Unit (RMU) support for Actions Semi S700 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: actions: Add Actions Semi Owl SoCs Reset Management Unit supportManivannan Sadhasivam
Add Reset Management Unit (RMU) support for Actions Semi Owl SoCs. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: actions: Cache regmap info in private clock descriptorManivannan Sadhasivam
In order to support the reset controller, regmap info needs to be cached in the private clock descriptor, owl_clk_desc. Hence, save that and also make the clock descriptor struct non const. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25clk: actions: Add S700 SoC clock supportSaravanan Sekar
Add Actions Semi S700 SoC clock support Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25clk: actions: Add missing REGMAP_MMIO dependencySaravanan Sekar
Add REGMAP_MMIO as dependency to avoid undefined reference to regmap symbols. Fixes: d85d20053e19 ("clk: actions: Add S900 SoC clock support") Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add S900 SoC clock supportManivannan Sadhasivam
Add Actions Semi S900 SoC clock support. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add pll clock supportManivannan Sadhasivam
Add support for Actions Semi PLL clock. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add composite clock supportManivannan Sadhasivam
Add support for Actions Semi composite clock. This clock consists of gate, mux, divider, factor and fixed factor clocks. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add fixed factor clock supportManivannan Sadhasivam
Add support for Actions Semi fixed factor clock reusing the clk ops from common clock driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add factor clock supportManivannan Sadhasivam
Add support for Actions Semi factor clock together with helper functions to be used in composite clock. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add divider clock supportManivannan Sadhasivam
Add support for Actions Semi divider clock together with helper functions to be used in composite clock. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add mux clock supportManivannan Sadhasivam
Add support for Actions Semi mux clock together with helper functions to be used in composite clock. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add gate clock supportManivannan Sadhasivam
Add support for Actions Semi gate clock together with helper functions to be used in composite clock. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: actions: Add common clock driver supportManivannan Sadhasivam
Add support for Actions Semi common clock driver with generic structures and interface functions. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 01:29:24 +0000