summaryrefslogtreecommitdiff
path: root/drivers/clk/Makefile
AgeCommit message (Collapse)Author
2018-12-14Merge branches 'clk-imx7ulp', 'clk-imx6-fixes', 'clk-imx-fixes', ↵Stephen Boyd
'clk-imx8qxp' and 'clk-imx8mq' into clk-next - NXP i.MX7ULP SoC clock support - Support for i.MX8QXP SoC clocks - Support for NXP i.MX8MQ clock controllers * clk-imx7ulp: clk: imx: add imx7ulp clk driver clk: imx: implement new clk_hw based APIs clk: imx: make mux parent strings const dt-bindings: clock: add imx7ulp clock binding doc clk: imx: add imx7ulp composite clk support clk: imx: add pfdv2 support clk: imx: add pllv4 support clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support clk: imx: add gatable clock divider support * clk-imx6-fixes: clk: imx6q: handle ENET PLL bypass clk: imx6q: optionally get CCM inputs via standard clock handles clk: imx6q: reset exclusive gates on init * clk-imx-fixes: clk: imx6q: add DCICx clocks gate clk: imx6sl: ensure MMDC CH0 handshake is bypassed clk: imx7d: remove UART1 clock setting * clk-imx8qxp: clk: imx: add imx8qxp lpcg driver clk: imx: add lpcg clock support clk: imx: add imx8qxp clk driver clk: imx: add scu clock common part clk: imx: add configuration option for mmio clks dt-bindings: clock: add imx8qxp lpcg clock binding dt-bindings: clock: imx8qxp: add SCU clock IDs firmware: imx: add pm svc headfile dt-bindings: fsl: scu: update power domain binding firmware: imx: remove resource id enums dt-bindings: imx: add scu resource id headfile * clk-imx8mq: clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant clk: imx: remove redundant initialization of ret to zero clk: imx: Add SCCG PLL type clk: imx: Add fractional PLL output clock clk: imx: Add clock driver for i.MX8MQ CCM clk: imx: Add imx composite clock dt-bindings: Add binding for i.MX8MQ CCM
2018-12-13clk: imx: add configuration option for mmio clksAisheng Dong
The patch introduces CONFIG_MXC_CLK option for legacy MMIO clocks, this is required to compile legacy MMIO clock conditionally when adding SCU based clocks for MX8 platforms later. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clockMatti Vaittinen
ROHM bd71837 and bd71847 contain 32768Hz clock gate. Support the clock using generic clock framework. Note, only bd71837 is tested but bd71847 should be identical what comes to clk parts. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-31Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time it looks like a quieter release cycle in the clk tree. I guess that's because of summer time holidays/vacations. The biggest change in the diffstat is in the Qualcomm clk driver, where they got support for CPUs and handful of SoCs. After that, the at91 driver got a major rewrite for newer DT bindings that should make things easier going forward and the TI code moved to a clockdomain based design. The long tail is mostly small driver updates for newer clks and some simpler SoC clock drivers such as the Hisilicon and imx support. In the core framework, we only have two small changes this time. One is a new clk API to get all clks for a device with the bulk clk APIs. This allows drivers that don't care about doing anything besides turning on all the clks to just clk_get() them all and turn them on. The other change is the beginning of a way to support save and restore of clk settings in the clk framework. TI is the only user right now, but we will want to expand upon this design in the future to support more save and restore of clk registers. At least this gets us started and works well enough for one SoC, but there's more work in the future. Core: - clk_bulk_get_all() API and friends to get all the clks for a device - Basic clk state save/restore hooks New Drivers: - Renesas RZ/A2 (R7S9210) SoC, including early clocks - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs - Rensas RZ/G2M (r8a774a1) SoC - Qualcomm Krait CPU clk support - Qualcomm QCS404 GCC support - Qualcomm SDM660 GCC support - Qualcomm SDM845 camera clock controller - Ingenic jz4725b CGU - Hisilicon 3670 SoC support - TI SCI clks on K3 SoCs - iMX6 MMDC clks - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs Updates: - Rework at91 PMC clock driver for new DT bindings - Nvidia Tegra clk driver MBIST workaround fix - S2RAM support for Marvell mvebu periph clks - Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 - Add support for CMT timer clocks on R-Car V3H - Add support for SHDI and various timer clocks on R-Car V3M - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs - Amlogic clk-pll driver improvements and updates - Amlogic axg audio controller system clocks - Register Amlogic meson8b clock controller early - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC - Remove obsoleted Exynos4212 ISP clock definitions - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design - TI RTC+DDR sleep mode support for clock save/restore - Allwinner A64 display engine support and fixes - Allwinner A83t display engine support and fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (186 commits) clk: qcom: Remove unused arrays in SDM845 GCC clk: fixed-rate: fix of_node_get-put imbalance clk: s2mps11: Add used attribute to s2mps11_dt_match clk: qcom: gcc-sdm660: Add MODULE_LICENSE clk: qcom: Add safe switch hook for krait mux clocks dt-bindings: clock: Document qcom,krait-cc clk: qcom: Add Krait clock controller driver dt-bindings: arm: Document qcom,kpss-gcc clk: qcom: Add KPSS ACC/GCC driver clk: qcom: Add support for Krait clocks clk: qcom: Add IPQ806X's HFPLLs clk: qcom: Add MSM8960/APQ8064's HFPLLs dt-bindings: clock: Document qcom,hfpll clk: qcom: Add HFPLL driver clk: qcom: Add support for High-Frequency PLLs (HFPLLs) ARM: Add Krait L2 register accessor functions clk: imx6q: add mmdc0 ipg clock clk: imx6sl: add mmdc ipg clocks clk: imx6sll: add mmdc1 ipg clock clk: imx6sx: add mmdc1 ipg clock ...
2018-10-18Merge branch 'clk-ingenic-jz4725b' into clk-nextStephen Boyd
- Ingenic jz4725b CGU * clk-ingenic-jz4725b: clk: Add Ingenic jz4725b CGU driver dt-bindings: clock: Add jz4725b-cgu.h header dt-bindings: clock: ingenic: Explicitly list compatible strings clk: ingenic: Add proper Kconfig entries
2018-10-16clk: ingenic: Add proper Kconfig entriesPaul Cercueil
Previously, the CGU code corresponding to the SoC for which we're compiling the kernel was the only one enabled, which made it impossible to build one kernel that supports them all. Now, it is possible to select more than one SoC to support. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-09drivers: clk: Add ZynqMP clock driverJolly Shah
This patch adds CCF compliant clock driver for ZynqMP. Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Tejas Patel <tejasp@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-02clk: keystone: Enable TISCI clocks if K3_ARCHNishanth Menon
K3_ARCH uses TISCI for clocks as well. Enable the same for the driver support. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-15Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The new and exciting feature this time around is in the clk core. We've added duty cycle support to the clk API so that clk signal duty cycle ratios can be adjusted while taking into account things like clk dividers and clk tree hierarchy. So far only one SoC has implemented support for this, but I expect there will be more to come in the future. Outside of the core, we have the usual pile of clk driver updates and additions. The Amlogic meson driver got the most lines in the diffstat this time around because it added support for a whole bunch of hardware and duty cycle configuration. After that the Rockchip PX30, Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff. We're left with the collection of non-critical fixes after that. Overall it looks pretty quiet this time. Core: - Clk duty cycle support - Proper CLK_SET_RATE_GATE support throughout the tree New Drivers: - Actions Semi Owl series S700 SoC clk driver - Qualcomm SDM845 display clock controller - i.MX6SX ocram_s clk support - Uniphier NAND, USB3 PHY, and SPI clk support - Qualcomm RPMh clk driver - i.MX7D mailbox clk support - Maxim 9485 Programmable Clock Generator - expose 32 kHz PLL on PXA SoCs - imx6sll GPIO clk gate support - Atmel at91 I2S audio clk support - SI544/SI514 clk on/off support - i.MX6UL GPIO clock gates in CCM CCGR - Renesas Crypto Engine clocks on R-Car H3 - Renesas clk support for the new RZ/N1D SoC - Allwinner A64 display engine clock support - support for Rockchip's PX30 SoC - Amlogic Meson axg PCIe and audio clocks - Amlogic Meson GEN CLK on gxbb, gxl and axg Updates: - remove an unused variable from Exynos4412 ISP driver - fix a thinko bug in SCMI clk division logic - add missing of_node_put()s in some i.MX clk drivers - Tegra SDMMC clk jitter improvements with high speed signaling modes - SPDX tagging for qcom and cs2000-cp drivers - stop leaking con ids in __clk_put() - fix a corner case in fixed factor clk probing where node is in DT but parent clk is registered much later - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value - i.MX clk init arrays removed in place of CLK_IS_CRITICAL - convert to CLK_IS_CRITICAL for i.MX51/53 driver - fix Tegra BPMP driver oops when xlating a NULL clk - proper default configuration for vic03 and vde clks on Tegra124 - mark Tegra memory controller clks as critical - fix array bounds clamp in Tegra's emc determine_rate() op - Ingenic i2s bit update and allow UDC clk to gate - fix name of aspeed SDC clk define to have only one 'CLK' - fix i.MX6QDL video clk parent - critical clk markings for qcom SDM845 - fix Stratix10 mpu_free_clk and sdmmc_free_clk parents - mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying the pwm used to drive the logic supply of the rk3399 core" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits) clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: cs2000-cp: convert to SPDX identifiers clk: scmi: Fix the rounding of clock rate clk: qcom: Add display clock controller driver for SDM845 clk: mvebu: armada-37xx-periph: Remove unused var num_parents clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable clk: actions: Add S700 SoC clock support dt-bindings: clock: Add S700 support for Actions Semi Soc's clk: actions: Add missing REGMAP_MMIO dependency clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() clk: imx: add ocram_s clock for i.mx6sx clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent ...
2018-07-06clk: Add driver for MAX9485Daniel Mack
This patch adds a driver for MAX9485, a programmable audio clock generator. The device requires a 27.000 MHz clock input. It can provide a gated buffered output of its input clock and two gated outputs of a PLL that can generate one out of 16 discrete frequencies. There is only one PLL however, so the two gated outputs will always have the same frequency but they can be switched individually. The driver for this device exposes 4 clocks in total: - MAX9485_MCLKOUT: A gated, buffered output of the input clock - MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete frequencies - MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT Some PLL output frequencies can be achieved with different register settings. The driver will select the one with lowest jitter in such cases. Signed-off-by: Daniel Mack <daniel@zonque.org> [sboyd@kernel.org: Use local variable for val in max9485_clkout_recalc_rate() and shorten line of max9485_of_clk_get()] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-21clk: sunxi-ng: replace lib-y with obj-yMasahiro Yamada
We had commit 06e226c7fb23 ("clk: sunxi-ng: Move all clock types to a library") and commit 799c43415442 ("kbuild: thin archives make default for all archs") in the same development cycle, from different trees. With migration to the thin archive, the entire drivers/clk/sunxi-ng/lib.a is linked to the vmlinux. This does not break build, but we do not get any size saving. However, we do not need to go back to the individual Kconfig options. The default configuration pulls in all (or most) of the CCU parts anyway. Also, once we enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, we can simply list all files with obj-y, and the linker will drop all unused functions by itself. After the long discussion [1], people there agreed to fix this, but nobody sent a patch after all. I am doing it now. I lifted up CONFIG_SUNXI_CCU to drivers/clk/Makefile because everything in drivers/clk/sunxi-ng/ depends on SUNXI_CCU. [1] https://patchwork.kernel.org/patch/9796521/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-04Merge branches 'clk-qcom-rpmh', 'clk-npcm7xx', 'clk-of-parent-count' and ↵Stephen Boyd
'clk-qcom-rcg-fix' into clk-next * clk-qcom-rpmh: dt-bindings: clock: Introduce QCOM RPMh clock bindings * clk-npcm7xx: clk: npcm7xx: fix return value check in npcm7xx_clk_init() clk: npcm7xx: add clock controller dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX Clock * clk-of-parent-count: pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding ARM: timer-sp: Use of_clk_get_parent_count() instead of open coding clk: Extract OF clock helpers in <linux/of_clk.h> * clk-qcom-rcg-fix: clk: qcom: Base rcg parent rate off plan frequency
2018-06-04Merge branch 'clk-actions' into clk-nextStephen Boyd
* clk-actions: clk: actions: Add S900 SoC clock support clk: actions: Add pll clock support clk: actions: Add composite clock support clk: actions: Add fixed factor clock support clk: actions: Add factor clock support clk: actions: Add divider clock support clk: actions: Add mux clock support clk: actions: Add gate clock support clk: actions: Add common clock driver support dt-bindings: clock: Add Actions S900 clock bindings
2018-04-16clk: npcm7xx: add clock controllerTali Perry
Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which generates and supplies clocks to all modules within the BMC. Signed-off-by: Tali Perry <tali.perry1@gmail.com> [sboyd@kernel.org: Drop clk_get()s, cleanup whitespace, drop unused includes, fix static checker warnings] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ...
2018-04-06clk: actions: Add common clock driver supportManivannan Sadhasivam
Add support for Actions Semi common clock driver with generic structures and interface functions. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06Merge branches 'clk-stratix10', 'clk-imx', 'clk-bcm', 'clk-cs2000' and ↵Stephen Boyd
'clk-imx6sll' into clk-next * clk-stratix10: clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 * clk-imx: clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: imx: pllv2: avoid using uninitialized values clk: imx6ull: Add epdc_podf instead of sim_podf clk: imx: imx7d: correct video pll clock tree clk: imx: imx7d: add the Keypad Port module clock clk: imx7d: add CAAM clock clk: imx: imx7d: add the snvs clock clk: imx: imx6sx: update cko mux options * clk-bcm: clk: bcm2835: De-assert/assert PLL reset signal when appropriate * clk-cs2000: clk: cs2000: set pm_ops in hibernate-compatible way * clk-imx6sll: clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
2018-04-06Merge branches 'clk-davinci', 'clk-si544', 'clk-rockchip', 'clk-uniphier' ↵Stephen Boyd
and 'clk-ti-flag-fix' into clk-next * clk-davinci: clk: davinci: Remove redundant dev_err calls clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks clk: davinci: New driver for TI DA8XX CFGCHIP clocks dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks clk: davinci: Add platform information for TI DM646x PSC clk: davinci: Add platform information for TI DM644x PSC clk: davinci: Add platform information for TI DM365 PSC clk: davinci: Add platform information for TI DM355 PSC clk: davinci: Add platform information for TI DA850 PSC clk: davinci: Add platform information for TI DA830 PSC clk: davinci: New driver for davinci PSC clocks dt-bindings: clock: New bindings for TI Davinci PSC clk: davinci: Add platform information for TI DM646x PLL clk: davinci: Add platform information for TI DM644x PLL clk: davinci: Add platform information for TI DM365 PLL clk: davinci: Add platform information for TI DM355 PLL clk: davinci: Add platform information for TI DA850 PLL clk: davinci: Add platform information for TI DA830 PLL clk: davinci: New driver for davinci PLL clocks dt-bindings: clock: Add new bindings for TI Davinci PLL clocks * clk-si544: clk: Add driver for the si544 clock generator chip * clk-rockchip: clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399 clk: rockchip: Fix error return in phase clock registration clk: rockchip: Correct the behaviour of restoring cached phase clk: rockchip: Fix wrong parents for MMC phase clock for rk3328 clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 clk: rockchip: Add 1.6GHz PLL rate for rk3399 clk: rockchip: Restore the clock phase after the rate was changed clk: rockchip: Prevent calculating mmc phase if clock rate is zero clk: rockchip: Free the memory on the error path clk: rockchip: document hdmi_phy external input for rk3328 clk: rockchip: add flags for rk3328 dclk_lcdc clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks clk: rockchip: protect all remaining rk3328 interconnect clocks clk: rockchip: export sclk_hdmi_sfc on rk3328 clk: rockchip: remove HCLK_VIO from rk3328 dt header clk: rockchip: fix hclk_vio_niu on rk3328 * clk-uniphier: clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: uniphier: add ethernet clock control support for PXs3 clk: uniphier: add Pro4/Pro5/PXs2 audio system clock * clk-ti-flag-fix: clk: ti: fix flag space conflict with clkctrl clocks clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
2018-04-06clk: socfpga: stratix10: add clock driver for Stratix10 platformDinh Nguyen
Add a clock driver for the Stratix10 SoC. The driver is similar to the Cyclone5/Arria10 platforms, with the exception that this driver only uses one single clock binding. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23clk: Add driver for the si544 clock generator chipMike Looijmans
This patch adds the driver and devicetree documentation for the Silicon Labs SI544 clock generator chip. This is an I2C controlled oscillator capable of generating clock signals ranging from 200kHz to 1500MHz. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [sboyd: assign max_freq to 0 in is_valid_frequency() to squelch warning] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20clk: davinci: New driver for davinci PLL clocksDavid Lechner
This adds a new driver for mach-davinci PLL clocks. This is porting the code from arch/arm/mach-davinci/clock.c to the common clock framework. Additionally, it adds device tree support for these clocks. The ifeq ($(CONFIG_COMMON_CLK), y) in the Makefile is needed to prevent compile errors until the clock code in arch/arm/mach-davinci is removed. Note: although there are similar clocks for TI Keystone we are not able to share the code for a few reasons. The keystone clocks are device tree only and use legacy one-node-per-clock bindings. Also the register layouts are a bit different, which would add even more if/else mess to the keystone clocks. And the keystone PLL driver doesn't support setting clock rates. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: stm32: add configuration flags for each of the stm32 driversBenjamin Gaignard
Add two configuration flags to be able to not compile all the time stm32f and stm32h7 drivers when ARCH_STM32 is set. That help to save some space on those small platforms. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-11clk: stm32mp1: Introduce STM32MP1 clock driverGabriel Fernandez
This patch introduces the mechanism to probe stm32mp1 driver. It also defines registers definition. This patch also introduces the generic mechanism to register a clock (a simple gate, divider and fixed factor). All clocks will be defined in one table. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2018-02-28clk: add support for clocks provided by SCMISudeep Holla
On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control. System Control and Management Interface(SCMI) Message Protocol is defined for the communication between the Application Cores(AP) and the SCP. This patch adds support for the clocks provided by SCP using SCMI protocol. Cc: linux-clk@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-01-26Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and ↵Stephen Boyd
'clk-allwinner' into clk-next * clk-aspeed: clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs dt-bindings: clock: Add ASPEED constants * clk-lock-UP: clk: fix reentrancy of clk_enable() on UP systems * clk-mediatek: clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: mediatek: Fix all warnings for missing struct clk_onecell_data clk: mediatek: fixup test-building of MediaTek clock drivers clk: mediatek: group drivers under indpendent menu * clk-allwinner: clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU clk: sunxi-ng: add support for Allwinner H3 DE2 CCU dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3 clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL clk: sunxi-ng: Support fixed post-dividers on NM style clocks clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: Support fixed post-dividers on MP style clocks clk: sunxi: Use PTR_ERR_OR_ZERO()
2018-01-26clk: Add clock driver for ASPEED BMC SoCsJoel Stanley
This adds the stub of a driver for the ASPEED SoCs. The clocks are defined and the static registration is set up. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21clk: mediatek: fixup test-building of MediaTek clock driversSean Wang
Let the build system looking into the directiory where the clock drivers resides for the COMPILE_TEST alternative dependency allows test-building the drivers. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21clk: sprd: Add common infrastructureChunyan Zhang
Added Spreadtrum's clock driver framework together with common structures and interface functions. Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-01clk: mb86s7x: Drop non-building driverAndreas Färber
It fails to build once we introduce the ARCH_MB86S7X Kconfig symbol: drivers/clk/clk-mb86s7x.c:27:10: fatal error: soc/mb86s7x/scb_mhu.h: No such file or directory #include <soc/mb86s7x/scb_mhu.h> ^~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. And when commenting out that line, we get: drivers/clk/clk-mb86s7x.c: In function 'crg_gate_control': drivers/clk/clk-mb86s7x.c:72:8: error: implicit declaration of function 'mb86s7x_send_packet' [-Werror=implicit-function-declaration] ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ, ^~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:72:28: error: 'CMD_PERI_CLOCK_GATE_SET_REQ' undeclared (first use in this function) ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ, ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:72:28: note: each undeclared identifier is reported only once for each function it appears in drivers/clk/clk-mb86s7x.c: In function 'crg_rate_control': drivers/clk/clk-mb86s7x.c:116:10: error: 'CMD_PERI_CLOCK_RATE_SET_REQ' undeclared (first use in this function) code = CMD_PERI_CLOCK_RATE_SET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:121:10: error: 'CMD_PERI_CLOCK_RATE_GET_REQ' undeclared (first use in this function); did you mean 'CMD_PERI_CLOCK_RATE_SET_REQ'? code = CMD_PERI_CLOCK_RATE_GET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~~ CMD_PERI_CLOCK_RATE_SET_REQ drivers/clk/clk-mb86s7x.c: In function 'mhu_cluster_rate': drivers/clk/clk-mb86s7x.c:276:10: error: 'CMD_CPU_CLOCK_RATE_GET_REQ' undeclared (first use in this function) code = CMD_CPU_CLOCK_RATE_GET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:278:10: error: 'CMD_CPU_CLOCK_RATE_SET_REQ' undeclared (first use in this function); did you mean 'CMD_CPU_CLOCK_RATE_GET_REQ'? code = CMD_CPU_CLOCK_RATE_SET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~ CMD_CPU_CLOCK_RATE_GET_REQ cc1: some warnings being treated as errors scripts/Makefile.build:302: recipe for target 'drivers/clk/clk-mb86s7x.o' failed make[2]: *** [drivers/clk/clk-mb86s7x.o] Error 1 Remove the driver for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-31clk: stm32h7: Add stm32h743 clock driverGabriel Fernandez
This patch enables clocks for STM32H743 boards. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> for MFD changes: Acked-by: Lee Jones <lee.jones@linaro.org> for DT-Bindings Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-30ARC: clk: introduce HSDK pll driverEugeniy Paltsev
HSDK board manages its clocks using various PLLs. These PLL have same dividers and corresponding control registers mapped to different addresses. So we add one common driver for such PLLs. Each PLL on HSDK board consists of three dividers: IDIV, FBDIV and ODIV. Output clock value is managed using these dividers. We add pre-defined tables with supported rate values and appropriate configurations of IDIV, FBDIV and ODIV for each value. As of today we add support for PLLs that generate clock for the HSDK arc cpus, system, ddr, AXI tunnel and hdmi. By this patch we add support for several plls (arc cpus pll and others), so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll and regular probing for others plls. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
2017-07-11clk: boston: Add a driver for MIPS Boston board clocksPaul Burton
Add a driver for the clocks provided by the MIPS Boston board from Imagination Technologies. 2 clocks are provided - the system clock & the CPU clock - and each is a simple fixed rate clock whose frequency can be determined by reading a register provided by the board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16483/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-21clk: Add Gemini SoC clock controllerLinus Walleij
The Cortina Systems Gemini (SL3516/CS3516) has an on-chip clock controller that derive all clocks from a single crystal, using some documented and some undocumented PLLs, half dividers, counters and gates. This is a best attempt to construct a clock driver for the clocks so at least we can gate off unused hardware and driver the PCI bus clock. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [sboyd@codeaurora.org: Fix devm_ioremap_resource() return value checking] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-14clk: keystone: Add sci-clk driver supportTero Kristo
In K2G, the clock handling is done through firmware executing on a separate core. Linux kernel needs to communicate to the firmware through TI system control interface to access any power management related resources, including clocks. The keystone sci-clk driver does this, by communicating to the firmware through the TI SCI driver. The driver adds support for registering clocks through DT, and basic required clock operations like prepare/get_rate, etc. Signed-off-by: Tero Kristo <t-kristo@ti.com> [sboyd@codeaurora.org: Make ti_sci_init_clocks() static] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-02Merge branch 'clk-bulk-get' into clk-nextStephen Boyd
* clk-bulk-get: clk: add managed version of clk_bulk_get clk: add clk_bulk_get accessories
2017-06-02clk: add clk_bulk_get accessoriesDong Aisheng
These helper function allows drivers to get several clk consumers in one operation. If any of the clk cannot be acquired then any clks that were got will be put before returning to the caller. This can relieve the driver owners' life who needs to handle many clocks, as well as each clock error reporting. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Anson Huang <anson.huang@nxp.com> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Octavian Purdila <octavian.purdila@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-05-24clk: renesas: Rework Kconfig and Makefile logicGeert Uytterhoeven
The goals are to: - Allow precise control over and automatic selection of which (sub)drivers are used for which SoC (which may change in the future), - Allow adding support for new SoCs easily, - Allow compile-testing of all (sub)drivers, - Keep driver selection logic in the subsystem-specific Kconfig, independent from the architecture-specific Kconfig (i.e. no "select" from arch/arm64/Kconfig.platforms), to avoid dependencies. This is implemented by: - Introducing Kconfig symbols for all drivers and sub-drivers, - Introducing the Kconfig symbol CLK_RENESAS, which is enabled automatically when building for a Renesas ARM platform, and which enables all required drivers without interaction of the user, based on SoC-specific ARCH_* symbols, - Allowing the user to enable any Kconfig symbol manually if COMPILE_TEST is enabled, - Using the new Kconfig symbols instead of the ARCH_* symbols to control compilation in the Makefile, - Always entering drivers/clk/renesas/ during the build. Note that currently not all (sub)drivers are enabled for compile-testing, as they depend on independent fixes in other subsystems. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-21clk: hi6220: Add the hi655x's pmic clockDaniel Lezcano
The hi655x multi function device is a PMIC providing regulators. The PMIC also provides a clock for the WiFi and the Bluetooth, let's implement this clock in order to add it in the hi655x MFD and allow proper wireless initialization. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [sboyd@codeaurora.org: Remove clkdev usage] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26clk: Make x86/ conditional on CONFIG_COMMON_CLKPierre-Louis Bossart
Fix Makefile for x86 support, dependency on CONFIG_COMMON_CLK was not explicit Fixes: 701190fd7419 ('clk: x86: add support for Lynxpoint LPSS clocks') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20clk: vc5: Add support for IDT VersaClock 5P49V5923 and 5P49V5933Marek Vasut
Add driver for IDT VersaClock 5 5P49V5923 and 5P49V5933 chips. These chips have two clock inputs, XTAL or CLK, which are muxed into single PLL/VCO input. In case of 5P49V5923, the XTAL in built into the chip while the 5P49V5923 requires external XTAL. The PLL feeds two fractional dividers. Each fractional divider feeds output mux, which allows selecting between clock from the fractional divider itself or from output mux on output N-1. In case of output mux 0, the output N-1 is instead connected to the output from the mux feeding the PLL. The driver thus far supports only the 5P49V5923 and 5P49V5933, while it should be easily extensible to the whole 5P49V59xx family of chips as they are all pretty similar. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-renesas-soc@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-23clk: Loongson1: Refactor Loongson1 clockKelvin Cheung
Factor out the common functions into loongson1/clk.c to support both Loongson1B and Loongson1C. And, put the rest into loongson1/clk-loongson1b.c. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: uniphier: add core support code for UniPhier clock driverMasahiro Yamada
This includes UniPhier clock driver code, except SoC-specific data arrays. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-15clk: max77686: Combine Maxim max77686 and max77802 driverLaxman Dewangan
The clock IP used on the Maxim PMICs max77686 and max77802 are same. The configuration of clock register is also same except the number of clocks. Part of common code utilisation, there is 3 files for these chips clock driver, one for common and two files for driver registration. Combine both drivers into single file and move common code into same common file reduces the 2 files and make max77686 and max77802 clock driver in single fine. This driver does not depends on the parent driver structure. The regmap handle is acquired through regmap APIs for the register access. This combination of driver helps on adding clock driver for different Maxim PMICs which has similar clock IP like MAX77620 and MAX20024. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-19clk: Makefile: re-sort and clean upMichael Turquette
Sorting is hard. Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-07-08Merge branch 'clk-sunxi-ng' into clk-nextMichael Turquette
2016-07-08clk: sunxi-ng: Add common infrastructureMaxime Ripard
Start our new clock infrastructure by adding the registration code, common structure and common code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-3-maxime.ripard@free-electrons.com
2016-06-22clk: meson: only build selected platformsMichael Turquette
Break the AmLogic clock code up so that only the necessary parts are compiled and linked. The core code is selected by both arm and arm64 builds with COMMON_CLK_AMLOGIC. The individual drivers have their own config options as well. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-05-20Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "It's the usual big pile of driver updates and additions, but we do have a couple core changes in here as well. Core: - CLK_IS_CRITICAL support has been added. This should allow drivers to properly express that a certain clk should stay on even if their prepare/enable count drops to 0 (and in turn the parents of these clks should stay enabled). - A clk registration API has been added, clk_hw_register(), and an OF clk provider API has been added, of_clk_add_hw_provider(). These APIs have been put in place to further split clk providers from clk consumers, with the goal being to have clk providers never deal with struct clk pointers at all. Conversion of provider drivers is on going. clkdev has also gained support for registering clk_hw pointers directly so we can convert drivers that don't use devicetree. New Drivers: - Marvell ap806 and cp110 system controllers (with clks inside!) - Hisilicon Hi3519 clock and reset controller - Axis ARTPEC-6 clock controllers - Oxford Semiconductor OXNAS clock controllers - AXS10X I2S PLL - Rockchip RK3399 clock and reset controller Updates: - MMC2 and UART2 clks on Samsung Exynos 3250, ACLK on Samsung Exynos 542x SoCs, and some more clk ID exporting for bus frequency scaling - Proper BCM2835 PCM clk support and various other clks - i.MX clk updates for i.MX6SX, i.MX7, and VF610 - Renesas updates for R-Car H3 - Tegra210 got updates for DisplayPort and HDMI 2.0 - Rockchip driver refactorings and fixes due to adding RK3399 support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (139 commits) clk: fix critical clock locking clk: qcom: mmcc-8996: Remove clocks that should be controlled by RPM clk: ingenic: Allow divider value to be divided clk: sunxi: Add display and TCON0 clocks driver clk: rockchip: drop old_rate calculation on pll rate changes clk: rockchip: simplify GRF handling in pll clocks clk: rockchip: lookup General Register Files in rockchip_clk_init clk: rockchip: fix the rk3399 sdmmc sample / drv name clk: mvebu: new driver for Armada CP110 system controller dt-bindings: arm: add DT binding for Marvell CP110 system controller clk: mvebu: new driver for Armada AP806 system controller clk: hisilicon: add CRG driver for hi3519 soc clk: hisilicon: export some hisilicon APIs to modules reset: hisilicon: add reset controller driver for hisilicon SOCs clk: bcm/kona: Do not use sizeof on pointer type clk: qcom: msm8916: Fix crypto clock flags clk: nxp: lpc18xx: Initialize clk_init_data::flags to 0 clk/axs10x: Add I2S PLL clock driver clk: imx7d: fix ahb clock mux 1 clk: fix comment of devm_clk_hw_register() ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 03:59:08 +0000