| Age | Commit message (Collapse) | Author |
|---|
|
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull splice updates from Al Viro:
"Christoph's assorted splice cleanups"
* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: rename pipe_buf ->steal to ->try_steal
fs: make the pipe_buf_operations ->confirm operation optional
fs: make the pipe_buf_operations ->steal operation optional
trace: remove tracing_pipe_buf_ops
pipe: merge anon_pipe_buf*_ops
fs: simplify do_splice_from
fs: simplify do_splice_to
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Core DRM had a lot of refactoring around managed drm resources to
make drivers simpler.
- Intel Tigerlake support is on by default
- amdgpu now support p2p PCI buffer sharing and encrypted GPU memory
Details:
core:
- uapi: error out EBUSY when existing master
- uapi: rework SET/DROP MASTER permission handling
- remove drm_pci.h
- drm_pci* are now legacy
- introduced managed DRM resources
- subclassing support for drm_framebuffer
- simple encoder helper
- edid improvements
- vblank + writeback documentation improved
- drm/mm - optimise tree searches
- port drivers to use devm_drm_dev_alloc
dma-buf:
- add flag for p2p buffer support
mst:
- ACT timeout improvements
- remove drm_dp_mst_has_audio
- don't use 2nd TX slot - spec recommends against it
bridge:
- dw-hdmi various improvements
- chrontel ch7033 support
- fix stack issues with old gcc
hdmi:
- add unpack function for drm infoframe
fbdev:
- misc fbdev driver fixes
i915:
- uapi: global sseu pinning
- uapi: OA buffer polling
- uapi: remove generated perf code
- uapi: per-engine default property values in sysfs
- Tigerlake GEN12 enabled.
- Lots of gem refactoring
- Tigerlake enablement patches
- move to drm_device logging
- Icelake gamma HW readout
- push MST link retrain to hotplug work
- bandwidth atomic helpers
- ICL fixes
- RPS/GT refactoring
- Cherryview full-ppgtt support
- i915 locking guidelines documented
- require linear fb stride to be 512 multiple on gen9
- Tigerlake SAGV support
amdgpu:
- uapi: encrypted GPU memory handling
- uapi: add MEM_SYNC IB flag
- p2p dma-buf support
- export VRAM dma-bufs
- FRU chip access support
- RAS/SR-IOV updates
- Powerplay locking fixes
- VCN DPG (powergating) enablement
- GFX10 clockgating fixes
- DC fixes
- GPU reset fixes
- navi SDMA fix
- expose FP16 for modesetting
- DP 1.4 compliance fixes
- gfx10 soft recovery
- Improved Critical Thermal Faults handling
- resizable BAR on gmc10
amdkfd:
- uapi: GWS resource management
- track GPU memory per process
- report PCI domain in topology
radeon:
- safe reg list generator fixes
nouveau:
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
adv7511:
- HDMI SPDIF support
ast:
- allocate crtc state size
- fix double assignment
- fix suspend
bochs:
- drop connector register
cirrus:
- move to tiny drivers.
exynos:
- fix imported dma-buf mapping
- enable runtime PM
- fixes and cleanups
mediatek:
- DPI pin mode swap
- config mipi_tx current/impedance
lima:
- devfreq + cooling device support
- task handling improvements
- runtime PM support
pl111:
- vexpress init improvements
- fix module auto-load
rcar-du:
- DT bindings conversion to YAML
- Planes zpos sanity check and fix
- MAINTAINERS entry for LVDS panel driver
mcde:
- fix return value
mgag200:
- use managed config init
stm:
- read endpoints from DT
vboxvideo:
- use PCI managed functions
- drop WC mtrr
vkms:
- enable cursor by default
rockchip:
- afbc support
virtio:
- various cleanups
qxl:
- fix cursor notify port
hisilicon:
- 128-byte stride alignment fix
sun4i:
- improved format handling"
* tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits)
drm/amd/display: Fix potential integer wraparound resulting in a hang
drm/amd/display: drop cursor position check in atomic test
drm/amdgpu: fix device attribute node create failed with multi gpu
drm/nouveau: use correct conflicting framebuffer API
drm/vblank: Fix -Wformat compile warnings on some arches
drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode
drm/amd/display: Handle GPU reset for DC block
drm/amdgpu: add apu flags (v2)
drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven
drm/amdgpu: fix pm sysfs node handling (v2)
drm/amdgpu: move gpu_info parsing after common early init
drm/amdgpu: move discovery gfx config fetching
drm/nouveau/dispnv50: fix runtime pm imbalance on error
drm/nouveau: fix runtime pm imbalance on error
drm/nouveau: fix runtime pm imbalance on error
drm/nouveau/debugfs: fix runtime pm imbalance on error
drm/nouveau/nouveau/hmm: fix migrate zero page to GPU
drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations
drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess/access_ok updates from Al Viro:
"Removals of trivially pointless access_ok() calls.
Note: the fiemap stuff was removed from the series, since they are
duplicates with part of ext4 series carried in Ted's tree"
* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci_host: get rid of pointless access_ok()
hfi1: get rid of pointless access_ok()
usb: get rid of pointless access_ok() calls
lpfc_debugfs: get rid of pointless access_ok()
efi_test: get rid of pointless access_ok()
drm_read(): get rid of pointless access_ok()
via-pmu: don't bother with access_ok()
drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
omapfb: get rid of pointless access_ok() calls
amifb: get rid of pointless access_ok() calls
drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
nvram: drop useless access_ok()
n_hdlc_tty_read(): remove pointless access_ok()
tomoyo_write_control(): get rid of pointless access_ok()
btrfs_ioctl_send(): don't bother with access_ok()
fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
dlmfs_file_write(): get rid of pointless access_ok()
|
|
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
|
|
copy_to_user()/copy_from_user() for everything
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
we are using copy_to_user()/memdup_user() anyway
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
Also, the following issue shows up due to the flexible-array member
having incomplete type[4]:
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_bios_measurements_start’:
drivers/char/tpm/eventlog/tpm2.c:54:46: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
54 | size = sizeof(struct tcg_pcr_event) - sizeof(event_header->event)
| ^
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_bios_measurements_next’:
drivers/char/tpm/eventlog/tpm2.c:102:10: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
102 | sizeof(event_header->event) + event_header->event_size;
| ^
drivers/char/tpm/eventlog/tpm2.c: In function ‘tpm2_binary_bios_measurements_show’:
drivers/char/tpm/eventlog/tpm2.c:140:10: error: invalid application of ‘sizeof’ to incomplete type ‘u8[]’ {aka ‘unsigned char[]’}
140 | sizeof(event_header->event) + event_header->event_size;
| ^
scripts/Makefile.build:266: recipe for target 'drivers/char/tpm/eventlog/tpm2.o' failed
make[3]: *** [drivers/char/tpm/eventlog/tpm2.o] Error 1
As mentioned above: "Flexible array members have incomplete type, and
so the sizeof operator may not be applied. As a quirk of the original
implementation of zero-length arrays, sizeof evaluates to zero."[1] As
in "sizeof(event_header->event) always evaluated to 0, so removing it
has no effect".
Lastly, make use of the struct_size() helper to deal with the
flexible array member and its host structure.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
[4] https://github.com/KSPP/linux/issues/43
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
There is export_uuid() function which exports uuid_t to the u8 array.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
And replace the arcane return value convention with a simple bool
where true means success and false means failure.
[AV: braino fix folded in]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull IPMI update from Corey Minyard:
"Convert i2c_new_device() to i2c_new_client_device()
Wolfram Sang has asked to have this included in 5.7 so the deprecated
API can be removed next release. There should be no functional
difference.
I think that entire this section of code can be removed; it is
leftover from other things that have since changed, but this is the
safer thing to do for now. The full removal can happen next release"
* tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi:
char: ipmi: convert to use i2c_new_client_device()
|
|
As this file got moved, fix references for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/b6c1ded590f27198de15b16237509128e55fa810.1588345503.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Move away from the deprecated API.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20200326210958.13051-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1). This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.
Remove this header and fold it into <crypto/sha.h> which already
contains constants and functions for SHA-1 (along with SHA-2).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The library implementation of the SHA-1 compression function is
confusingly called just "sha_transform()". Alongside it are some "SHA_"
constants and "sha_init()". Presumably these are left over from a time
when SHA just meant SHA-1. But now there are also SHA-2 and SHA-3, and
moreover SHA-1 is now considered insecure and thus shouldn't be used.
Therefore, rename these functions and constants to make it very clear
that they are for SHA-1. Also add a comment to make it clear that these
shouldn't be used.
For the extra-misleadingly named "SHA_MESSAGE_BYTES", rename it to
SHA1_BLOCK_SIZE and define it to just '64' rather than '(512/8)' so that
it matches the same definition in <crypto/sha.h>. This prepares for
merging <linux/cryptohash.h> into <crypto/sha.h>.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Improved the HW_RANDOM_CCTRNG help description.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For many users, the Arm CryptoCell HW is not available, so the default for
HW_RANDOM_CCTRNG should to n.
Remove the line to follow the convention - 'n' is the default anyway so no
need to state it explicitly.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cctrng is unusable on non-DT systems so we should depend
on it.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the following sparse warnings:
drivers/char/hw_random/cctrng.c:316:6: warning: symbol
'cc_trng_compwork_handler' was not declared. Should it be static?
drivers/char/hw_random/cctrng.c:451:6: warning: symbol
'cc_trng_startwork_handler' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Acked-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is export_uuid() function which exports uuid_t to the u8 array.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch removes the unnecessary FIPS ifdef in cctrng.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler
methods to take kernel pointers instead. It gets rid of the set_fs address
space overrides used by BPF. As per discussion, pull in the feature branch
into bpf-next as it relates to BPF sysctl progs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
|
|
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The cctrng doesn't compile without HAS_IOMEM so we should depend
on it.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: a583ed310bb6 ("hwrng: cctrng - introduce Arm CryptoCell driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull virtio fixes and cleanups from Michael Tsirkin:
- Some bug fixes
- Cleanup a couple of issues that surfaced meanwhile
- Disable vhost on ARM with OABI for now - to be fixed fully later in
the cycle or in the next release.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits)
vhost: disable for OABI
virtio: drop vringh.h dependency
virtio_blk: add a missing include
virtio-balloon: Avoid using the word 'report' when referring to free page hinting
virtio-balloon: make virtballoon_free_page_report() static
vdpa: fix comment of vdpa_register_device()
vdpa: make vhost, virtio depend on menu
vdpa: allow a 32 bit vq alignment
drm/virtio: fix up for include file changes
remoteproc: pull in slab.h
rpmsg: pull in slab.h
virtio_input: pull in slab.h
remoteproc: pull in slab.h
virtio-rng: pull in slab.h
virtgpu: pull in uaccess.h
tools/virtio: make asm/barrier.h self contained
tools/virtio: define aligned attribute
virtio/test: fix up after IOTLB changes
vhost: Create accessors for virtqueues private_data
vdpasim: Return status in vdpasim_get_status
...
|
|
Call disable_interrupts() if we have to revert to polling in order not to
unnecessarily reserve the IRQ for the life-cycle of the driver.
Cc: stable@vger.kernel.org # 4.5.x
Reported-by: Hans de Goede <hdegoede@redhat.com>
Fixes: e3837e74a06d ("tpm_tis: Refactor the interrupt setup")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
For the algorithm that does not match the bank, a positive
value EINVAL is returned here. I think this is a typo error.
It is necessary to return an error value.
Cc: stable@vger.kernel.org # 5.4.x
Fixes: 9f75c8224631 ("KEYS: trusted: correctly initialize digests and fix locking issue")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume
with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The
"partner partition suspended" transport event disables the associated CRQ
such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed
until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.'
This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from
ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and
retries the ibmvtpm_send_crq() once.
Cc: stable@vger.kernel.org # 3.7.x
Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Reported-by: Linh Pham <phaml@us.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: George Wilson <gcwilson@linux.ibm.com>
Tested-by: Linh Pham <phaml@us.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
This patch fixes the following problem when the ibmvtpm driver
is built as a module:
ERROR: modpost: "tpm2_get_cc_attrs_tbl" [drivers/char/tpm/tpm_ibmvtpm.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:94: __modpost] Error 1
make: *** [Makefile:1298: modules] Error 2
Fixes: 18b3670d79ae ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
This fixes build failure when CONFIG_CRYPTO_FIPS is defined.
Fixes: a583ed310bb6 ("hwrng: cctrng - introduce Arm CryptoCell driver")
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
DMA_MASK bit values are different for different generations.
This will become more difficult to manage over time with the open
coded usage of different versions of the device.
Fix by:
disallow setting of dma mask in AGP path (< GEN(5) for i915,
add dma_mask_size to the device info configuration,
updating open code call sequence to the latest interface,
refactoring into a common function for setting the dma segment
and mask info
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
cc: Brian Welty <brian.welty@intel.com>
cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417195107.68732-1-michael.j.ruhl@intel.com
|
|
In preparation to virtio header changes, include slab.h directly as
this module is using it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Backmerging in order to pull "topic/phy-compliance".
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Introduce low level Arm CryptoCell TRNG HW support.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
|
|
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull IPMI updates from Corey Minyard:
"Bug fixes for main IPMI driver, kcs updates
A couple of bug fixes for the main IPMI driver, one functional and two
annotations.
The kcs driver has some significant updates that have been pending for
a while, but I forgot to include in next until a week ago. But this
code is only used by the people who are sending it to me, really, so
it's not a big deal. I did want it to sit in next for at least a week,
and it did result in a fix"
* tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs: Fix aspeed_kcs_probe_of_v1()
ipmi: Add missing annotation for ipmi_ssif_lock_cond() and ipmi_ssif_unlock_cond()
ipmi: kcs: aspeed: Implement v2 bindings
ipmi: kcs: Finish configuring ASPEED KCS device before enable
dt-bindings: ipmi: aspeed: Introduce a v2 binding for KCS
ipmi: fix hung processes in __get_guid()
drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists
|
|
After changing the timing between GTT updates and execution on the GPU,
we started seeing sporadic failures on Ironlake. These were narrowed
down to being an insufficiently strong enough barrier/delay after
updating the GTT and scheduling execution on the GPU. By forcing the
uncached read, and adding the missing barrier for the singular
insert_page (relocation paths), the sporadic failures go away.
Fixes: 983d308cb8f6 ("agp/intel: Serialise after GTT updates")
Fixes: 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Cc: stable@vger.kernel.org # v4.0+
Link: https://patchwork.freedesktop.org/patch/msgid/20200410083535.25464-1-chris@chris-wilson.co.uk
|
|
This needs to return the newly allocated struct but instead it returns
zero which leads to an immediate Oops in the caller.
Fixes: 09f5f680707e ("ipmi: kcs: aspeed: Implement v2 bindings")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20200407122149.GA100026@mwanda>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Commit 9255782f7061 ("sysfs: Wrap __compat_only_sysfs_link_entry_to_kobj
function to change the symlink name") made this function a wrapper
around a new non-underscored function, which is a bit odd. The normal
naming convention is the other way around: the underscored function is
the wrappee, and the non-underscored function is the wrapper.
There's only one single user (well, two call-sites in that user) of the
more limited double underscore version of this function, so just remove
the oddly named wrapper entirely and just add the extra NULL argument to
the user.
I considered just doing that in the merge, but that tends to make
history really hard to read.
Link: https://lore.kernel.org/lkml/CAHk-=wgkkmNV5tMzQDmPAQuNJBuMcry--Jb+h8H1o4RA3kF7QQ@mail.gmail.com/
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull /dev/random updates from Ted Ts'o:
- Improve getrandom and /dev/random's support for those arm64
architecture variants that have RNG instructions.
- Use batched output from CRNG instead of CPU's RNG instructions for
better performance.
- Miscellaneous bug fixes.
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: avoid warnings for !CONFIG_NUMA builds
random: fix data races at timer_rand_state
random: always use batched entropy for get_random_u{32,64}
random: Make RANDOM_TRUST_CPU depend on ARCH_RANDOM
arm64: add credited/trusted RNG support
random: add arch_get_random_*long_early()
random: split primary/secondary crng init paths
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
|
|
ipmi_ssif_unlock_cond()
Sparse reports a warning at ipmi_ssif_unlock_cond()
and ipmi_ssif_lock_cond()
warning: context imbalance in ipmi_ssif_lock_cond()
- wrong count at exit
warning: context imbalance in ipmi_ssif_unlock_cond()
- unexpected unlock
The root cause is the missing annotation at ipmi_ssif_unlock_cond()
and ipmi_ssif_lock_cond()
Add the missing __acquires(&ata_scsi_rbuf_lock)
Add the missing __releases(&ata_scsi_rbuf_lock)
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Message-Id: <20200403160505.2832-6-jbi.octave@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
The v2 bindings allow us to extract the resources from the devicetree.
The table in the driver is retained to derive the channel index, which
removes the need for kcs_chan property from the v1 bindings. The v2
bindings allow us to reduce the number of warnings generated by the
existing devicetree nodes.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Message-Id: <01ef3787e9ddaa9d87cfd55a2ac793053b5a69de.1576462051.git-series.andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
The interrupts were configured after the channel was enabled. Configure
them beforehand so they will work.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Message-Id: <c0aba2c9dfe2d0525e9cefd37995983ead0ec242.1576462051.git-series.andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
The wait_event() function is used to detect command completion.
When send_guid_cmd() returns an error, smi_send() has not been
called to send data. Therefore, wait_event() should not be used
on the error path, otherwise it will cause the following warning:
[ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004
[ 1361.588813] ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40
[ 1361.677952] ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010
[ 1361.767077] 00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000
[ 1361.856199] Call Trace:
[ 1361.885578] [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780
[ 1361.951406] [<ffffffff8173cfb6>] schedule+0x36/0x80
[ 1362.010979] [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler]
[ 1362.091281] [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100
[ 1362.168533] [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler]
[ 1362.258337] [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si]
[ 1362.334521] [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si]
[ 1362.411701] [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si]
[ 1362.487917] [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si]
[ 1362.568219] [<ffffffff810021a0>] do_one_initcall+0x50/0x180
[ 1362.636109] [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190
[ 1362.714330] [<ffffffff811b2ae1>] do_init_module+0x5f/0x200
[ 1362.781208] [<ffffffff81123ca8>] load_module+0x1898/0x1de0
[ 1362.848069] [<ffffffff811202e0>] ? __symbol_put+0x60/0x60
[ 1362.913886] [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80
[ 1362.998514] [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120
[ 1363.068463] [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120
[ 1363.140513] [<ffffffff811244be>] SyS_finit_module+0xe/0x10
[ 1363.207364] [<ffffffff81003c04>] do_syscall_64+0x74/0x180
Fixes: 50c812b2b951 ("[PATCH] ipmi: add full sysfs support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.17-
Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
