summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2015-11-12Merge tag 'tpmdd-next-20151110' of https://github.com/jsakkine/linux-tpmdd ↵James Morris
into for-linus
2015-11-09tpm: fix compat 'ppi' link handling in tpm_chip_register()Jarkko Sakkinen
__compat_only_sysfs_link_entry_to_kobj() was unconditionally called for TPM1 chips, which caused crash on Acer C720 laptop where DSM for the ACPI object did not exist. There are two reasons for unwanted behavior: * The code did not check whether __compat_only_sysfs_link_entry_to_kobj() returned -ENOENT. This is OK. It just meanst that ppi is not available. * The code did not clean up properly. Compat link should added only after all other init is done. This patch sorts out these issues. Fixes: 9b774d5cf2db Reported-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jeremiah Mahler <jmmahler@gmail.com> Acked-by: Peter Huewe <PeterHuewe@gmx.de>
2015-11-09tpm: fix missing migratable flag in sealing functionality for TPM2Jarkko Sakkinen
The 'migratable' flag was not added to the key payload. This patch fixes the problem. Fixes: 0fe5480303a1 ("keys, trusted: seal/unseal with TPM 2.0 chips") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Peter Huewe <PeterHuewe@gmx.de>
2015-11-09TPM: revert the list handling logic fixed in 398a1e7Jarkko Sakkinen
Mimi reported that afb5abc reverts the fix in 398a1e7. This patch reverts it back. Fixes: afb5abc262e9 ("tpm: two-phase chip management functions") Reported-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Peter Huewe <PeterHuewe@gmx.de>
2015-11-09TPM: Avoid reference to potentially freed memoryChristophe JAILLET
Reference to the 'np' node is dropped before dereferencing the 'sizep' and 'basep' pointers, which could by then point to junk if the node has been freed. Refactor code to call 'of_node_put' later. Fixes: c5df39262dd5 ("drivers/char/tpm: Add securityfs support for event log") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Peter Huewe <PeterHuewe@gmx.de>
2015-11-09tpm_tis: restore IRQ vector in IO memory after failed probingMartin Wilck
If the probing finishes without success, it will leave the value 15 in the TPM_IRQ_VECTOR register. If the driver is unloaded and reloaded, it will "think" that the hardware had been programmed with IRQ 15, and will not probe again. This patch restores the original value in the IO memory if no IRQ is probed. Signed-off-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Peter Huewe <PeterHuewe@gmx.de>
2015-11-09tpm_tis: free irq after probingMartin Wilck
Release IRQs used for probing only. Otherwise the TPM will end up with all IRQs 3-15 assigned. Fixes: afb5abc262e9 ("tpm: two-phase chip management functions") Signed-off-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Peter Huewe <PeterHuewe@gmx.de>
2015-11-05Merge tag 'powerpc-4.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Kconfig: remove BE-only platforms from LE kernel build from Boqun Feng - Refresh ps3_defconfig from Geoff Levand - Emit GNU & SysV hashes for the vdso from Michael Ellerman - Define an enum for the bolted SLB indexes from Anshuman Khandual - Use a local to avoid multiple calls to get_slb_shadow() from Michael Ellerman - Add gettimeofday() benchmark from Michael Neuling - Avoid link stack corruption in __get_datapage() from Michael Neuling - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar K.V - Add ppc64le_defconfig from Michael Ellerman - pseries: extract of_helpers module from Andy Shevchenko - Correct string length in pseries_of_derive_parent() from Nathan Fontenot - Free the MSI bitmap if it was slab allocated from Denis Kirjanov - Shorten irq_chip name for the SIU from Christophe Leroy - Wait 1s for secondaries to enter OPAL during kexec from Samuel Mendoza-Jonas - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from Colin Ian King - Disable hugepd for 64K page size, from Aneesh Kumar K.V - Differentiate between hugetlb and THP during page walk from Aneesh Kumar K.V - Make PCI non-optional for pseries from Michael Ellerman - Individual System V IPC system calls from Sam bobroff - Add selftest of unmuxed IPC calls from Michael Ellerman - discard .exit.data at runtime from Stephen Rothwell - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul Gortmaker - Use of_get_next_parent to simplify code from Christophe Jaillet - Paginate some xmon output from Sam bobroff - Add some more elements to the xmon PACA dump from Michael Ellerman - Allow the tm-syscall selftest to build with old headers from Michael Ellerman - Run EBB selftests only on POWER8 from Denis Kirjanov - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael Ellerman - Avoid reference to potentially freed memory in prom.c from Christophe Jaillet - Quieten boot wrapper output with run_cmd from Geoff Levand - EEH fixes and cleanups from Gavin Shan - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael Ellerman - Fix section mismatch warning in msi_bitmap_alloc() from Denis Kirjanov - Fix ps3-lpm white space from Rudhresh Kumar J - Fix ps3-vuart null dereference from Colin King - nvram: Add missing kfree in error path from Christophe Jaillet - nvram: Fix function name in some errors messages, from Christophe Jaillet - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro Koskinen - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov - cxl: Free virtual PHB when removing from Andrew Donnellan - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from Michael Ellerman - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O= from Michael Ellerman - Freescale updates from Scott: Highlights include 64-bit book3e kexec/kdump support, a rework of the qoriq clock driver, device tree changes including qoriq fman nodes, support for a new 85xx board, and some fixes. - MPC5xxx updates from Anatolij: Highlights include a driver for MPC512x LocalPlus Bus FIFO with its device tree binding documentation, mpc512x device tree updates and some minor fixes. * tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits) powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc() powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id() powerpc/pseries: Correct string length in pseries_of_derive_parent() powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s) powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes powerpc: handle error case in cpm_muram_alloc() powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake powerpc/book3e-64: Enable kexec powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32 powerpc/book3e-64/kexec: Enable SMP release powerpc/book3e-64/kexec: create an identity TLB mapping powerpc/book3e-64: Don't limit paca to 256 MiB powerpc/book3e/kdump: Enable crash_kexec_wait_realmode powerpc/book3e: support CONFIG_RELOCATABLE powerpc/booke64: Fix args to copy_and_flush powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts powerpc/e6500: kexec: Handle hardware threads ...
2015-11-05Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem update from James Morris: "This is mostly maintenance updates across the subsystem, with a notable update for TPM 2.0, and addition of Jarkko Sakkinen as a maintainer of that" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (40 commits) apparmor: clarify CRYPTO dependency selinux: Use a kmem_cache for allocation struct file_security_struct selinux: ioctl_has_perm should be static selinux: use sprintf return value selinux: use kstrdup() in security_get_bools() selinux: use kmemdup in security_sid_to_context_core() selinux: remove pointless cast in selinux_inode_setsecurity() selinux: introduce security_context_str_to_sid selinux: do not check open perm on ftruncate call selinux: change CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default KEYS: Merge the type-specific data with the payload data KEYS: Provide a script to extract a module signature KEYS: Provide a script to extract the sys cert list from a vmlinux file keys: Be more consistent in selection of union members used certs: add .gitignore to stop git nagging about x509_certificate_list KEYS: use kvfree() in add_key Smack: limited capability for changing process label TPM: remove unnecessary little endian conversion vTPM: support little endian guests char: Drop owner assignment from i2c_driver ...
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-04Merge tag 'char-misc-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...
2015-11-04Merge tag 'tty-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver update for 4.4-rc1. Lots of serial driver updates and a few small tty core changes. Full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (148 commits) tty: Use unbound workqueue for all input workers tty: Abstract tty buffer work tty: Prevent tty teardown during tty_write_message() tty: core: Use correct spinlock flavor in tiocspgrp() tty: Combine SIGTTOU/SIGTTIN handling serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty() ttyFDC: Fix build problems due to use of module_{init,exit} tty: remove unneeded return statement serial: 8250_mid: add support for DMA engine handling from UART MMIO dmaengine: hsu: remove platform data dmaengine: hsu: introduce stubs for the exported functions dmaengine: hsu: make the UART driver in control of selecting this driver serial: fix mctrl helper functions serial: 8250_pci: Intel MID UART support to its own driver serial: fsl_lpuart: add earlycon support tty: disable unbind for old 74xx based serial/mpsc console port serial: pl011: Spelling s/clocks-names/clock-names/ n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars tty: synclink, fix indentation serial: at91, fix rs485 properties ...
2015-11-04Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for cipher output IVs in testmgr - Add missing crypto_ahash_blocksize helper - Mark authenc and des ciphers as not allowed under FIPS. Algorithms: - Add CRC support to 842 compression - Add keywrap algorithm - A number of changes to the akcipher interface: + Separate functions for setting public/private keys. + Use SG lists. Drivers: - Add Intel SHA Extension optimised SHA1 and SHA256 - Use dma_map_sg instead of custom functions in crypto drivers - Add support for STM32 RNG - Add support for ST RNG - Add Device Tree support to exynos RNG driver - Add support for mxs-dcp crypto device on MX6SL - Add xts(aes) support to caam - Add ctr(aes) and xts(aes) support to qat - A large set of fixes from Russell King for the marvell/cesa driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits) crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params() crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used hwrng: exynos - Add Device Tree support hwrng: exynos - Fix missing configuration after suspend to RAM hwrng: exynos - Add timeout for waiting on init done dt-bindings: rng: Describe Exynos4 PRNG bindings crypto: marvell/cesa - use __le32 for hardware descriptors crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op() crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio() crypto: marvell/cesa - use gfp_t for gfp flags crypto: marvell/cesa - use dma_addr_t for cur_dma crypto: marvell/cesa - use readl_relaxed()/writel_relaxed() crypto: caam - fix indentation of close braces crypto: caam - only export the state we really need to export crypto: caam - fix non-block aligned hash calculation crypto: caam - avoid needlessly saving and restoring caam_hash_ctx crypto: caam - print errno code when hash registration fails crypto: marvell/cesa - fix memory leak crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req() crypto: marvell/cesa - rearrange handling for sw padded hashes ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24char: ipmi: ipmi_ssif: Replace timeval with timespec64Amitoj Kaur Chawla
This patch replaces timeval with timespec64 as 32 bit 'struct timeval' will not give current time beyond 2038. The patch changes the code to use ktime_get_real_ts64() which returns a 'struct timespec64' instead of do_gettimeofday() which returns a 'struct timeval' This patch also alters the format string in pr_info() for now.tv_sec to incorporate 'long long' on 32 bit architectures. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-20hwrng: exynos - Add Device Tree supportKrzysztof Kozlowski
Add Device Tree support for the driver. The Pseudo Random Number Generator module is the same in almost all of Exynos SoCs, since Exynos4210 (however the tests were done only on Trats2 board with Exynos4412). There are some differences on newer Exynos Octa (Exynos542x) SoCs. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-20hwrng: exynos - Fix missing configuration after suspend to RAMKrzysztof Kozlowski
After suspend to RAM the device stopped to work with ETIMEDOUT error: $ dd if=/dev/hwrng of=/dev/null bs=1 count=16 dd: reading `/dev/hwrng': Connection timed out In the STATUS register the bits #5 (PRNG_DONE) and #1 (SEED_SETTING_DONE) were not set. Instead PRNG_ERROR (seventh bit) was high. After each system suspend initialize the seed to fix the error. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-20hwrng: exynos - Add timeout for waiting on init doneKrzysztof Kozlowski
Driver may hang waiting indefinitely for PRNG to finish its initialization stage. Instead of stalling return -ETIMEDOUT error. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-20hwrng: exynos - Fix unbalanced PM runtime get/putsDaniel Thompson
Currently this driver calls pm_runtime_get_sync() rampantly but never puts anything back. This makes it impossible for the device to autosuspend properly; it will remain fully active after the first use. Fix in the obvious way. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-19TPM: remove unnecessary little endian conversionHon Ching \(Vicky\) Lo
The base pointer for the event log is allocated in the local kernel (in prom_instantiate_sml()), therefore it is already in the host's endian byte order and requires no conversion. The content of the 'basep' pointer in read_log() stores the base address of the log. This patch ensures that it is correctly implemented. Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <ashley@ahsleylai.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19vTPM: support little endian guestsHon Ching \(Vicky\) Lo
This patch makes the code endianness independent. We defined a macro do_endian_conversion to apply endianness to raw integers in the event entries so that they will be displayed properly. tpm_binary_bios_measurements_show() is modified for the display. Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <ashley@ahsleylai.com> Reviewed-by: Ashley Lai <ashley@ahsleylai.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19char: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19vTPM: fix searching for the right vTPM node in device treeHon Ching \(Vicky\) Lo
Replace all occurrences of '/ibm,vtpm' with '/vdevice/vtpm', as only the latter is guanranteed to be available for the client OS. The '/ibm,vtpm' node should only be used by Open Firmware, which is susceptible to changes. Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19tpm: seal/unseal for TPM 2.0Jarkko Sakkinen
Added tpm_trusted_seal() and tpm_trusted_unseal() API for sealing trusted keys. This patch implements basic sealing and unsealing functionality for TPM 2.0: * Seal with a parent key using a 20 byte auth value. * Unseal with a parent key using a 20 byte auth value. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19tpm: introduce tpm_bufJarkko Sakkinen
This patch introduces struct tpm_buf that provides a string buffer for constructing TPM commands. This allows to construct variable sized TPM commands. For the buffer a page is allocated and mapped, which limits maximum size to PAGE_SIZE. Variable sized TPM commands are needed in order to add algorithmic agility. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19tpm: move the PPI attributes to character device directory.Jarkko Sakkinen
Moved PPI attributes to the character device directory. This aligns with the sysfs guidelines and makes them race free because they are created atomically with the character device as part of device_register().The character device and the sysfs attributes appear at the same time to the user space. As part of this change we enable PPI attributes also for TPM 2.0 devices. In order to retain backwards compatibility with TPM 1.x devices, a symlink is created to the platform device directory. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com> Tested-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (on TPM 1.2) Tested-by: Chris J Arges <chris.j.arges@canonical.com> Tested-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19tpm, tpm_tis: fix tpm_tis ACPI detection issue with TPM 2.0Jarkko Sakkinen
Both for FIFO and CRB interface TCG has decided to use the same HID MSFT0101. They can be differentiated by looking at the start method from TPM2 ACPI table. This patches makes necessary fixes to tpm_tis and tpm_crb modules in order to correctly detect, which module should be used. For MSFT0101 we must use struct acpi_driver because struct pnp_driver has a 7 character limitation. It turned out that the root cause in b371616b8 was not correct for https://bugzilla.kernel.org/show_bug.cgi?id=98181. v2: * One fixup was missing from v1: is_tpm2_fifo -> is_fifo v3: * Use pnp_driver for existing HIDs and acpi_driver only for MSFT0101 in order ensure backwards compatibility. v4: * Check for FIFO before doing *anything* in crb_acpi_add(). * There was return immediately after acpi_bus_unregister_driver() in cleanup_tis(). This caused pnp_unregister_driver() not to be called. Cc: stable@kernel.org Reported-by: Michael Saunders <mick.saunders@gmail.com> Reported-by: Michael Marley <michael@michaelmarley.com> Reported-by: Jethro Beekman <kernel@jbeekman.nl> Reported-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Michael Marley <michael@michaelmarley.com> Tested-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (on TPM 1.2) Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19tpm, tpm_crb: fix unaligned read of the command buffer addressJarkko Sakkinen
The command buffer address must be read with exactly two 32-bit reads. Otherwise, on some HW platforms, it seems that HW will abort the read operation, which causes CPU to fill the read bytes with 1's. Therefore, we cannot rely on memcpy_fromio() but must call ioread32() two times instead. Also, this matches the PC Client Platform TPM Profile specification, which defines command buffer address with two 32-bit fields. Cc: stable@kernel.org Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19vTPM: fix memory allocation flag for rtce buffer at kernel bootHon Ching \(Vicky\) Lo
At ibm vtpm initialzation, tpm_ibmvtpm_probe() registers its interrupt handler, ibmvtpm_interrupt, which calls ibmvtpm_crq_process to allocate memory for rtce buffer. The current code uses 'GFP_KERNEL' as the type of kernel memory allocation, which resulted a warning at kernel/lockdep.c. This patch uses 'GFP_ATOMIC' instead so that the allocation is high-priority and does not sleep. Cc: stable@kernel.org Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-19tpm: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-10-17tty: Remove ASYNC_CLOSING checks in open()/hangup() methodsPeter Hurley
Since at least before 2.6.30, tty drivers that do not drop the tty lock while closing cannot observe ASYNC_CLOSING set while holding the tty lock; this includes the tty driver's open() and hangup() methods, since the tty core calls these methods holding the tty lock. For these drivers, waiting for ASYNC_CLOSING to clear while opening is not required, since this condition cannot occur. Similarly, even when the open() method drops and reacquires the tty lock after blocking, ASYNC_CLOSING cannot be set (again, for drivers that do not drop the tty lock while closing). Now that tty port drivers no longer drop the tty lock while closing (since 'tty: Remove tty_wait_until_sent_from_close()'), the same conditions apply: waiting for ASYNC_CLOSING to clear while opening is not required, nor is re-checking ASYNC_CLOSING after dropping and reacquiring the tty lock while blocking (eg., in *_block_til_ready()). Note: The ASYNC_CLOSING flag state is still maintained since several bitrotting drivers use it for (dubious) other purposes. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-15hwrng: stm32 - Fix build with CONFIG_PMDaniel Thompson
Commit c6a97c42e399 ("hwrng: stm32 - add support for STM32 HW RNG") was inadequately tested (actually it was tested quite hard so incompetent would be a better description that inadequate) and does not compile on platforms with CONFIG_PM set. Fix this. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-14hwrng: stm32 - add support for STM32 HW RNGDaniel Thompson
Add support for STMicroelectronics STM32 random number generator. The config value defaults to N, reflecting the fact that STM32 is a very low resource microcontroller platform and unlikely to be targeted by any "grown up" defconfigs. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-08hwrng: st - Improve FIFO size/depth descriptionLee Jones
The original representation of FIFO size in the driver coupled with the ambiguity in the documentation meant that it was easy to confuse readers. This lead to a false positive BUG-find and subsequently time wastage debugging this phantom issue. Hopefully this patch can prevent future readers from falling into the same trap. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-08hwrng: st - Use real-world device timings for timeoutLee Jones
Samples are documented to be available every 0.667us, so in theory the 8 sample deep FIFO should take 5.336us to fill. However, during thorough testing, it became apparent that filling the FIFO actually takes closer to 12us. Also take into consideration that udelay() can behave oddly i.e. not delay for as long as requested. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>: "IIRC, Linus recommends a x2 factor on delays, especially timeouts generated by these functions. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-02agp/uninorth: fix a memleak in create_gatt_tableDenis Kirjanov
Fix the memory leak in create_gatt_table: we've lost a kfree on the exit path for the pages array allocated in uninorth_create_gatt_table Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-27Merge 4.3-rc3 into char-misc-nextGreg Kroah-Hartman
We want those fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - check the return value of platform_get_irq as signed int in xgene. - skip adf_dev_restore on virtual functions in qat. - fix double-free with backlogged requests in marvell_cesa" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: xgene - fix handling platform_get_irq crypto: qat - VF should never trigger SBR on PH crypto: marvell - properly handle CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests
2015-09-21hwrng: xgene - fix handling platform_get_irqAndrzej Hajda
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: st - Add support for ST's HW Random Number GeneratorLee Jones
Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Kieran Bingham <kieranbingham@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: core - Simplify RNG switching from sysfsLee Jones
If we attempt to use sysfs to change the current RNG in the usual way i.e. issuing something like: `echo 8a8a000.rng > /sys/devices/virtual/misc/hw_random/rng_current` ... it will fail because the code doesn't currently take the '\n' into consideration. Well, now it does. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: Kconfig - Fix device node name reference /dev/hw_random => /dev/hwrngLee Jones
In April 2009, commit d405640 ("Driver Core: misc: add node name support for misc devices.") inadvertently changed the device node name from /dev/hw_random to /dev/hwrng. Since 6 years has passed since the change it seems unpractical to change it back, as this node name is probably considered ABI by now. So instead, we'll just change the Kconfig help to match the current situation. NB: It looks like rng-tools have already been updated. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Kieran Bingham <kieranbingham@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: Fix module autoload for OF platform driversLuis de Bethencourt
This platform drivers have a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: mxc-rnga - Use the preferred format for kzallocFabio Estevam
According to Documentation/CodingStyle: "The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...);" ,so do as suggested. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: mxc-rnga - Remove unnecessary dev_info messageFabio Estevam
There is no need to print a message simply saying that a kernel driver has been registered, so remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: mxc-rnga - Remove uneeded initializationFabio Estevam
There is no need to pre-initialize variable 'err' as this initial value will be overwritten later on. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: mxc-rnga - Remove unneeded goto labelFabio Estevam
We can simplify the code by returning the error code immediately instead of jumping to a goto label. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-21hwrng: octeon - Use devm_hwrng_registerVaishali Thakkar
Use resource managed function devm_hwrng_register instead of hwrng_register to make the error-path simpler. Also, remove octeon_rng_remove as it is now redundant. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-20drivers/char: make efirtc.c driver explicitly non-modularPaul Gortmaker
The Kconfig for this driver is currently: config EFI_RTC bool "EFI Real Time Clock Services" ...meaning that it currently is not being built as a module by anyone. Lets remove all modular references, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We leave some tags like MODULE_LICENSE for documentation purposes. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>