summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2021-02-02amba: Make the remove callback return voidUwe Kleine-König
All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2020-12-18Merge tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm updates from Daniel Vetter: "UAPI Changes: - Only enable char/agp uapi when CONFIG_DRM_LEGACY is set Cross-subsystem Changes: - vma_set_file helper to make vma->vm_file changing less brittle, acked by Andrew Core Changes: - dma-buf heaps improvements - pass full atomic modeset state to driver callbacks - shmem helpers: cached bo by default - cleanups for fbdev, fb-helpers - better docs for drm modes and SCALING_FITLER uapi - ttm: fix dma32 page pool regression Driver Changes: - multi-hop regression fixes for amdgpu, radeon, nouveau - lots of small amdgpu hw enabling fixes (display, pm, ...) - fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all fairly minor - some cleanups for legacy drm/fbdev drivers" * tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits) drm/qxl: don't allocate a dma_address array drm/nouveau: fix multihop when move doesn't work. drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping drm/i915: Fix mismatch between misplaced vma check and vma insert drm/i915/perf: also include Gen11 in OATAILPTR workaround Revert "drm/i915: re-order if/else ladder for hpd_irq_setup" drm/amdgpu/disply: fix documentation warnings in display manager drm/amdgpu: print mmhub client name for dimgrey_cavefish drm/amdgpu: set mode1 reset as default for dimgrey_cavefish drm/amd/display: Add get_dig_frontend implementation for DCEx drm/radeon: remove h from printk format specifier drm/amdgpu: remove h from printk format specifier drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous" drm/amdgpu: fix regression in vbios reservation handling on headless drm/amdgpu/SRIOV: Extend VF reset request wait period drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log. drm/amd/display: Adding prototype for dccg21_update_dpp_dto() drm/amdgpu: print what method we are using for runtime pm drm/amdgpu: simplify logic in atpx resume handling drm/amdgpu: no need to call pci_ignore_hotplug for _PR3 ...
2020-12-17Merge tag 'for-linus-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - IRQ handling cleanups - Support for suspend - Various fixes for UML specific drivers: ubd, vector, xterm * tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (32 commits) um: Fix build w/o CONFIG_PM_SLEEP um: time-travel: Correct time event IRQ delivery um: irq/sigio: Support suspend/resume handling of workaround IRQs um: time-travel: Actually apply "free-until" optimisation um: chan_xterm: Fix fd leak um: tty: Fix handling of close in tty lines um: Monitor error events in IRQ controller um: allocate a guard page to helper threads um: support some of ARCH_HAS_SET_MEMORY um: time-travel: avoid multiple identical propagations um: Fetch registers only for signals which need them um: Support suspend to RAM um: Allow PM with suspend-to-idle um: time: Fix read_persistent_clock64() in time-travel um: Simplify os_idle_sleep() and sleep longer um: Simplify IRQ handling code um: Remove IRQ_NONE type um: irq: Reduce irq_reg allocation um: irq: Clean up and rename struct irq_fd um: Clean up alarm IRQ chip name ...
2020-12-17Merge tag 'powerpc-5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Switch to the generic C VDSO, as well as some cleanups of our VDSO setup/handling code. - Support for KUAP (Kernel User Access Prevention) on systems using the hashed page table MMU, using memory protection keys. - Better handling of PowerVM SMT8 systems where all threads of a core do not share an L2, allowing the scheduler to make better scheduling decisions. - Further improvements to our machine check handling. - Show registers when unwinding interrupt frames during stack traces. - Improvements to our pseries (PowerVM) partition migration code. - Several series from Christophe refactoring and cleaning up various parts of the 32-bit code. - Other smaller features, fixes & cleanups. Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu. * tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits) powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug powerpc: Add config fragment for disabling -Werror powerpc/configs: Add ppc64le_allnoconfig target powerpc/powernv: Rate limit opal-elog read failure message powerpc/pseries/memhotplug: Quieten some DLPAR operations powerpc/ps3: use dma_mapping_error() powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10 powerpc/perf: Fix Threshold Event Counter Multiplier width for P10 powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range() KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp KVM: PPC: fix comparison to bool warning KVM: PPC: Book3S: Assign boolean values to a bool variable powerpc: Inline setup_kup() powerpc/64s: Mark the kuap/kuep functions non __init KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering powerpc/xive: Improve error reporting of OPAL calls powerpc/xive: Simplify xive_do_source_eoi() powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG ...
2020-12-16Merge tag 'for-linus-5.11-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "Some very minor changes. Nothing functional, just little syntax cleanups and a RCU warning suppression" * tag 'for-linus-5.11-1' of git://github.com/cminyard/linux-ipmi: char: ipmi: convert comma to semicolon ipmi: msghandler: Suppress suspicious RCU usage warning ipmi/watchdog: replace atomic_add() and atomic_sub() char: ipmi: remove unneeded break
2020-12-16char: ipmi: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Message-Id: <20201216132615.15529-1-zhengyongjun3@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-12-15Merge tag 'char-misc-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
2020-12-15Merge tag 'drm-misc-next-2020-11-27-1' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.11: UAPI Changes: Cross-subsystem Changes: * char/agp: Disable frontend without CONFIG_DRM_LEGACY * mm: Fix fput in mmap error path; Introduce vma_set_file() to change vma->vm_file Core Changes: * dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code; Skip sync for unmapped buffers; Alloc higher order pages is available; Respect num_fences when initializing shared fence list * doc: Improvements around DRM modes and SCALING_FILTER * Pass full state to connector atomic functions + callee updates * Cleanups * shmem: Map pages with caching by default; Cleanups * ttm: Fix DMA32 for global page pool * fbdev: Cleanups * fb-helper: Update framebuffer after userspace writes; Unmap console buffer during shutdown; Rework damage handling of shadow framebuffer Driver Changes: * amdgpu: Multi-hop fixes, Clenaups * imx: Fix rotation for Vivante tiled formats; Support nearest-neighour skaling; Cleanups * mcde: Fix RGB formats; Support DPI output; Cleanups * meson: HDMI clock fixes * panel: Add driver and bindings for Innolux N125HCE-GN1 * panel/s6e63m0: More backlight levels; Fix init; Cleanups * via: Clenunps * virtio: Use fence ID for handling fences; Cleanups Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g
2020-12-14Merge tag 's390-5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for the hugetlb_cma command line option to allocate gigantic hugepages using CMA - Add arch_get_random_long() support. - Add ap bus userspace notifications. - Increase default size of vmalloc area to 512GB and otherwise let it increase dynamically by the size of physical memory. This should fix all occurrences where the vmalloc area was not large enough. - Completely get rid of set_fs() (aka select SET_FS) and rework address space handling while doing that; making address space handling much more simple. - Reimplement getcpu vdso syscall in C. - Add support for extended SCLP responses (> 4k). This allows e.g. to handle also potential large system configurations. - Simplify KASAN by removing 3-level page table support and only supporting 4-levels from now on. - Improve debug-ability of the kernel decompressor code, which now prints also stack traces and symbols in case of problems to the console. - Remove more power management leftovers. - Other various fixes and improvements all over the place. * tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits) s390/mm: add support to allocate gigantic hugepages using CMA s390/crypto: add arch_get_random_long() support s390/smp: perform initial CPU reset also for SMT siblings s390/mm: use invalid asce for user space when switching to init_mm s390/idle: fix accounting with machine checks s390/idle: add missing mt_cycles calculation s390/boot: add build-id to decompressor s390/kexec_file: fix diag308 subcode when loading crash kernel s390/cio: fix use-after-free in ccw_device_destroy_console s390/cio: remove pm support from ccw bus driver s390/cio: remove pm support from css-bus driver s390/cio: remove pm support from IO subchannel drivers s390/cio: remove pm support from chsc subchannel driver s390/vmur: remove unused pm related functions s390/tape: remove unsupported PM functions s390/cio: remove pm support from eadm-sch drivers s390: remove pm support from console drivers s390/dasd: remove unused pm related functions s390/zfcp: remove pm support from zfcp driver s390/ap: let bus_register() add the AP bus sysfs attributes ...
2020-12-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add speed testing on 1420-byte blocks for networking Algorithms: - Improve performance of chacha on ARM for network packets - Improve performance of aegis128 on ARM for network packets Drivers: - Add support for Keem Bay OCS AES/SM4 - Add support for QAT 4xxx devices - Enable crypto-engine retry mechanism in caam - Enable support for crypto engine on sdm845 in qce - Add HiSilicon PRNG driver support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits) crypto: qat - add capability detection logic in qat_4xxx crypto: qat - add AES-XTS support for QAT GEN4 devices crypto: qat - add AES-CTR support for QAT GEN4 devices crypto: atmel-i2c - select CONFIG_BITREVERSE crypto: hisilicon/trng - replace atomic_add_return() crypto: keembay - Add support for Keem Bay OCS AES/SM4 dt-bindings: Add Keem Bay OCS AES bindings crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd crypto: seed - remove trailing semicolon in macro definition crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg crypto: cpt - Fix sparse warnings in cptpf hwrng: ks-sa - Add dependency on IOMEM and OF crypto: lib/blake2s - Move selftest prototype into header file crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata crypto: ecdh - avoid unaligned accesses in ecdh_set_secret() crypto: ccree - rework cache parameters handling crypto: cavium - Use dma_set_mask_and_coherent to simplify code crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code ...
2020-12-13um: random: Register random as hwrng-core deviceChristopher Obbard
The UML random driver creates a dummy device under the guest, /dev/hw_random. When this file is read from the guest, the driver reads from the host machine's /dev/random, in-turn reading from the host kernel's entropy pool. This entropy pool could have been filled by a hardware random number generator or just the host kernel's internal software entropy generator. Currently the driver does not fill the guests kernel entropy pool, this requires a userspace tool running inside the guest (like rng-tools) to read from the dummy device provided by this driver, which then would fill the guest's internal entropy pool. This all seems quite pointless when we are already reading from an entropy pool, so this patch aims to register the device as a hwrng device using the hwrng-core framework. This not only improves and cleans up the driver, but also fills the guest's entropy pool without having to resort to using extra userspace tools in the guest. This is typically a nuisance when booting a guest: the random pool takes a long time (~200s) to build up enough entropy since the dummy hwrng is not used to fill the guest's pool. This port was originally attempted by Alexander Neville "dark" (in CC, discussion in Link), but the conversation there stalled since the handling of -EAGAIN errors were no removed and longer handled by the driver. This patch attempts to use the existing method of error handling but utilises the new hwrng core. The issue can be noticed when booting a UML guest: [ 2.560000] random: fast init done [ 214.000000] random: crng init done With the patch applied, filling the pool becomes a lot quicker: [ 2.560000] random: fast init done [ 12.000000] random: crng init done Cc: Alexander Neville <dark@volatile.bz> Link: https://lore.kernel.org/lkml/20190828204609.02a7ff70@TheDarkness/ Link: https://lore.kernel.org/lkml/20190829135001.6a5ff940@TheDarkness.local/ Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-04hwrng: ks-sa - Add dependency on IOMEM and OFHerbert Xu
This patch adds a dependency for KEYSTONE on HAS_IOMEM and OF to prevent COMPILE_TEST build failures. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-04powerpc/ps3: make system bus's remove and shutdown callbacks return voidUwe Kleine-König
The driver core ignores the return value of struct device_driver::remove because there is only little that can be done. For the shutdown callback it's ps3_system_bus_shutdown() which ignores the return value. To simplify the quest to make struct device_driver::remove return void, let struct ps3_system_bus_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201126165950.2554997-2-u.kleine-koenig@pengutronix.de
2020-11-27hwrng: hisi - remove HiSilicon TRNG driverWeili Qian
Driver of HiSilicon true random number generator(TRNG) is removed from 'drivers/char/hw_random'. Both 'Kunpeng 920' and 'Kunpeng 930' chips have TRNG, however, PRNG is only supported by 'Kunpeng 930'. So, this driver is moved to 'drivers/crypto/hisilicon/trng/' in the next to enable the two's TRNG better. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-19ipmi: msghandler: Suppress suspicious RCU usage warningQinglang Miao
while running ipmi, ipmi_smi_watcher_register() caused a suspicious RCU usage warning. ----- ============================= WARNING: suspicious RCU usage 5.10.0-rc3+ #1 Not tainted ----------------------------- drivers/char/ipmi/ipmi_msghandler.c:750 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.0/4254: stack backtrace: CPU: 0 PID: 4254 Comm: syz-executor.0 Not tainted 5.10.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/ 01/2014 Call Trace: dump_stack+0x19d/0x200 ipmi_smi_watcher_register+0x2d3/0x340 [ipmi_msghandler] acpi_ipmi_init+0xb1/0x1000 [acpi_ipmi] do_one_initcall+0x149/0x7e0 do_init_module+0x1ef/0x700 load_module+0x3467/0x4140 __do_sys_finit_module+0x10d/0x1a0 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x468ded ----- It is safe because smi_watchers_mutex is locked and srcu_read_lock has been used, so simply pass lockdep_is_held() to the list_for_each_entry_rcu() to suppress this warning. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Message-Id: <20201119070839.381-1-miaoqinglang@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-11-18char/agp: Disable frontend without CONFIG_DRM_LEGACYDaniel Vetter
It's probably full of bugs ready for exploiting by userspace. And there's not going to be any userspace for this without any of the drm legacy drivers enabled too. So just couple it together. Note that the frontend is only the /dev/agp ioctl interface, which per Adam is only used by the i810 userspace drivers. All other drivers go through the drm bufmap agp handling abstraction apparently. v2: Augment commit message a bit from m-l feedback. Acked-by: Adam Jackson <ajax@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Adam Jackson <ajax@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201117214029.591896-1-daniel.vetter@ffwll.ch
2020-11-17ipmi/watchdog: replace atomic_add() and atomic_sub()Yejune Deng
atomic_inc() and atomic_dec() looks better Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Message-Id: <1605511807-7135-1-git-send-email-yejune.deng@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-11-16Merge 5.10-rc4 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-15Merge tag 'char-misc-5.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc/whatever driver fixes for 5.10-rc4. Nothing huge, lots of small fixes for reported issues: - habanalabs driver fixes - speakup driver fixes - uio driver fixes - virtio driver fix - other tiny driver fixes Full details are in the shortlog. All of these have been in linux-next for a full week with no reported issues" * tag 'char-misc-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: uio: Fix use-after-free in uio_unregister_device() firmware: xilinx: fix out-of-bounds access nitro_enclaves: Fixup type and simplify logic of the poll mask setup speakup ttyio: Do not schedule() in ttyio_in_nowait speakup: Fix clearing selection in safe context speakup: Fix var_id_t values and thus keymap virtio: virtio_console: fix DMA memory allocation for rproc serial habanalabs/gaudi: mask WDT error in QMAN habanalabs/gaudi: move coresight mmu config habanalabs: fix kernel pointer type mei: protect mei_cl_mtu from null dereference
2020-11-09virtio: virtio_console: fix DMA memory allocation for rproc serialAlexander Lobakin
Since commit 086d08725d34 ("remoteproc: create vdev subdevice with specific dma memory pool"), every remoteproc has a DMA subdevice ("remoteprocX#vdevYbuffer") for each virtio device, which inherits DMA capabilities from the corresponding platform device. This allowed to associate different DMA pools with each vdev, and required from virtio drivers to perform DMA operations with the parent device (vdev->dev.parent) instead of grandparent (vdev->dev.parent->parent). virtio_rpmsg_bus was already changed in the same merge cycle with commit d999b622fcfb ("rpmsg: virtio: allocate buffer from parent"), but virtio_console did not. In fact, operations using the grandparent worked fine while the grandparent was the platform device, but since commit c774ad010873 ("remoteproc: Fix and restore the parenting hierarchy for vdev") this was changed, and now the grandparent device is the remoteproc device without any DMA capabilities. So, starting v5.8-rc1 the following warning is observed: [ 2.483925] ------------[ cut here ]------------ [ 2.489148] WARNING: CPU: 3 PID: 101 at kernel/dma/mapping.c:427 0x80e7eee8 [ 2.489152] Modules linked in: virtio_console(+) [ 2.503737] virtio_rpmsg_bus rpmsg_core [ 2.508903] [ 2.528898] <Other modules, stack and call trace here> [ 2.913043] [ 2.914907] ---[ end trace 93ac8746beab612c ]--- [ 2.920102] virtio-ports vport1p0: Error allocating inbufs kernel/dma/mapping.c:427 is: WARN_ON_ONCE(!dev->coherent_dma_mask); obviously because the grandparent now is remoteproc dev without any DMA caps: [ 3.104943] Parent: remoteproc0#vdev1buffer, grandparent: remoteproc0 Fix this the same way as it was for virtio_rpmsg_bus, using just the parent device (vdev->dev.parent, "remoteprocX#vdevYbuffer") for DMA operations. This also allows now to reserve DMA pools/buffers for rproc serial via Device Tree. Fixes: c774ad010873 ("remoteproc: Fix and restore the parenting hierarchy for vdev") Cc: stable@vger.kernel.org # 5.1+ Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Date: Thu, 5 Nov 2020 11:10:24 +0800 Link: https://lore.kernel.org/r/AOKowLclCbOCKxyiJ71WeNyuAAj2q8EUtxrXbyky5E@cp7-web-042.plabs.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-09char: mwave: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201019194503.14426-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-09char: lp: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201019194628.14731-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-09s390/trng: set quality to 1024Christian Borntraeger
The s390-trng does provide 100% entropy. The quality value is supported to be between 1 and 1024 and not 1..1000. Use 1024 to make this driver the preferred one. If we ever have a better driver that has the same quality but is faster we can change this again when merging the new driver. No need to be conservative. This makes sure that the hw variant is preferred over things like virtio-rng, where the hypervisor has a potential to be misconfigured and thus should have a slightly lower confidence. Cc: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-06tpm: efi: Don't create binary_bios_measurements file for an empty logTyler Hicks
Mimic the pre-existing ACPI and Device Tree event log behavior by not creating the binary_bios_measurements file when the EFI TPM event log is empty. This fixes the following NULL pointer dereference that can occur when reading /sys/kernel/security/tpm0/binary_bios_measurements after the kernel received an empty event log from the firmware: BUG: kernel NULL pointer dereference, address: 000000000000002c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17 Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019 RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550 Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49 RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010 RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258 RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300 R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280 R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258 FS: 00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __kmalloc_node+0x113/0x320 ? kvmalloc_node+0x31/0x80 seq_read+0x94/0x420 vfs_read+0xa7/0x190 ksys_read+0xa7/0xe0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 In this situation, the bios_event_log pointer in the tpm_bios_log struct was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was due to the following kmemdup() in tpm_read_log_efi(): int tpm_read_log_efi(struct tpm_chip *chip) { ... /* malloc EventLog space */ log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL); if (!log->bios_event_log) { ret = -ENOMEM; goto out; } ... } When log_size is zero, due to an empty event log from firmware, ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the binary_bios_measurements file, the tpm2_bios_measurements_start() function does not perform a ZERO_OR_NULL_PTR() check on the bios_event_log pointer before dereferencing it. Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of the bios_event_log pointer, simply avoid creating the binary_bios_measurements_file as is done in other event log retrieval backends. Explicitly ignore all of the events in the final event log when the main event log is empty. The list of events in the final event log cannot be accurately parsed without referring to the first event in the main event log (the event log header) so the final event log is useless in such a situation. Fixes: 58cc1e4faf10 ("tpm: parse TPM event logs based on EFI table") Link: https://lore.kernel.org/linux-integrity/E1FDCCCB-CA51-4AEE-AC83-9CDE995EAE52@canonical.com/ Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: Kenneth R. Crudup <kenny@panix.com> Reported-by: Mimi Zohar <zohar@linux.ibm.com> Cc: Thiébaud Weksteen <tweek@google.com> Cc: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2020-11-06tpm_tis: Disable interrupts on ThinkPad T490sJerry Snitselaar
There is a misconfiguration in the bios of the gpio pin used for the interrupt in the T490s. When interrupts are enabled in the tpm_tis driver code this results in an interrupt storm. This was initially reported when we attempted to enable the interrupt code in the tpm_tis driver, which previously wasn't setting a flag to enable it. Due to the reports of the interrupt storm that code was reverted and we went back to polling instead of using interrupts. Now that we know the T490s problem is a firmware issue, add code to check if the system is a T490s and disable interrupts if that is the case. This will allow us to enable interrupts for everyone else. If the user has a fixed bios they can force the enabling of interrupts with tpm_tis.interrupts=1 on the kernel command line. Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2020-11-06hwrng: imx-rngc - irq already prints an errorNigel Christian
Clean up the check for irq. dev_err() is superfluous as platform_get_irq() already prints an error. Check for zero would indicate a bug. Remove curly braces to conform to styling requirements. Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-03char: misc: increase DYNAMIC_MINORS valueSangmoon Kim
DYNAMIC_MINORS value has been set to 64. Due to this reason, we are facing a module loading fail problem of device driver like below. [ 45.712771] pdic_misc_init - return error : -16 We need to increase this value for registering more misc devices. Signed-off-by: Sangmoon Kim <sangmoon.kim@samsung.com> Link: https://lore.kernel.org/r/20201029062855.19757-1-sangmoon.kim@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27char: ipmi: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return Signed-off-by: Tom Rix <trix@redhat.com> Message-Id: <20201019194805.14996-1-trix@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-10-24random32: make prandom_u32() output unpredictableGeorge Spelvin
Non-cryptographic PRNGs may have great statistical properties, but are usually trivially predictable to someone who knows the algorithm, given a small sample of their output. An LFSR like prandom_u32() is particularly simple, even if the sample is widely scattered bits. It turns out the network stack uses prandom_u32() for some things like random port numbers which it would prefer are *not* trivially predictable. Predictability led to a practical DNS spoofing attack. Oops. This patch replaces the LFSR with a homebrew cryptographic PRNG based on the SipHash round function, which is in turn seeded with 128 bits of strong random key. (The authors of SipHash have *not* been consulted about this abuse of their algorithm.) Speed is prioritized over security; attacks are rare, while performance is always wanted. Replacing all callers of prandom_u32() is the quick fix. Whether to reinstate a weaker PRNG for uses which can tolerate it is an open question. Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") was an earlier attempt at a solution. This patch replaces it. Reported-by: Amit Klein <aksecurity@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ [ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions to prandom.h for later use; merged George's prandom_seed() proposal; inlined siprand_u32(); replaced the net_rand_state[] array with 4 members to fix a build issue; cosmetic cleanups to make checkpatch happy; fixed RANDOM32_SELFTEST build ] Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-10-15Merge tag 'char-misc-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ...
2020-10-14Merge tag 'for-linus-5.10-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "Some minor bug fixes, return values, cleanups of prints, conversion of tasklets to the new API. The biggest change is retrying the initial information fetch from the management controller. If that fails, the iterface is not operational, and one group was having trouble with the management controller not being ready when the OS started up. So a retry was added" * tag 'for-linus-5.10-1' of git://github.com/cminyard/linux-ipmi: ipmi_si: Fix wrong return value in try_smi_init() ipmi: msghandler: Fix a signedness bug ipmi: add retry in try_get_dev_id() ipmi: Clean up some printks ipmi:msghandler: retry to get device id on an error ipmi:sm: Print current state when the state is invalid ipmi: Reset response handler when failing to send the command ipmi: add a newline when printing parameter 'panic_op' by sysfs char: ipmi: convert tasklets to use new tasklet_setup() API
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-13Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Allow DRBG testing through user-space af_alg - Add tcrypt speed testing support for keyed hashes - Add type-safe init/exit hooks for ahash Algorithms: - Mark arc4 as obsolete and pending for future removal - Mark anubis, khazad, sead and tea as obsolete - Improve boot-time xor benchmark - Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity Drivers: - Fixes and enhancement for XTS in caam - Add support for XIP8001B hwrng in xiphera-trng - Add RNG and hash support in sun8i-ce/sun8i-ss - Allow imx-rngc to be used by kernel entropy pool - Use crypto engine in omap-sham - Add support for Ingenic X1830 with ingenic" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits) X.509: Fix modular build of public_key_sm2 crypto: xor - Remove unused variable count in do_xor_speed X.509: fix error return value on the failed path crypto: bcm - Verify GCM/CCM key length in setkey crypto: qat - drop input parameter from adf_enable_aer() crypto: qat - fix function parameters descriptions crypto: atmel-tdes - use semicolons rather than commas to separate statements crypto: drivers - use semicolons rather than commas to separate statements hwrng: mxc-rnga - use semicolons rather than commas to separate statements hwrng: iproc-rng200 - use semicolons rather than commas to separate statements hwrng: stm32 - use semicolons rather than commas to separate statements crypto: xor - use ktime for template benchmarking crypto: xor - defer load time benchmark to a later time crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num' crypto: hisilicon/zip - fix the return value when device is busy crypto: hisilicon/zip - fix zero length input in GZIP decompress crypto: hisilicon/zip - fix the uncleared debug registers lib/mpi: Fix unused variable warnings crypto: x86/poly1305 - Remove assignments with no effect hwrng: npcm - modify readl to readb ...
2020-10-05ipmi_si: Fix wrong return value in try_smi_init()Tianjia Zhang
On an error exit path, a negative error code should be returned instead of a positive return value. Fixes: 90b2d4f15ff7 ("ipmi_si: Remove hacks for adding a dummy platform devices") Cc: Corey Minyard <cminyard@mvista.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Message-Id: <20201005145212.84435-1-tianjia.zhang@linux.alibaba.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-10-02hwrng: mxc-rnga - use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02hwrng: iproc-rng200 - use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02hwrng: stm32 - use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02hwrng: npcm - modify readl to readbTomer Maimon
Modify the read size to the correct HW random registers size, 8bit. The incorrect read size caused and faulty HW random value. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02tpm_tis: Add a check for invalid statusJames Bottomley
Some TIS based TPMs can return 0xff to status reads if the locality hasn't been properly requested. Detect this condition by checking the bits that the TIS spec specifies must return zero are clear and return zero in that case. Also drop a warning so the problem can be identified in the calling path and fixed (usually a missing try_get_ops()). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-10-02tpm: use %*ph to print small bufferAndy Shevchenko
Use %*ph format to print small buffer as hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-10-02tpm: tis: add support for MMIO TPM on SynQuacerMasahisa Kojima
When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO window that is backed by the SPI command sequencer in the SPI bus controller. This arrangement has the limitation that only byte size accesses are supported, and so we'll need to provide a separate module that take this into account. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-09-28agp: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-09-25hwrng: ingenic - Add hardware TRNG for Ingenic X1830周琰杰 (Zhou Yanjie)
Add X1830 SoC digital true random number generator driver. Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-23raw: don't keep unopened block device aroundChristoph Hellwig
Turn binding into a normal dev_t as the struct block device doesn't buy us anything and use blkdev_open_by_dev to actually open it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-18ipmi: msghandler: Fix a signedness bugDan Carpenter
The type for the completion codes should be unsigned char instead of char. If it is declared as a normal char then the conditions in __get_device_id() are impossible because the IPMI_DEVICE_IN_FW_UPDATE_ERR error codes are higher than 127. drivers/char/ipmi/ipmi_msghandler.c:2449 __get_device_id() warn: impossible condition '(bmc->cc == 209) => ((-128)-127 == 209)' Fixes: f8910ffa81b0 ("ipmi:msghandler: retry to get device id on an error") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20200918142756.GB909725@mwanda> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-09-16ipmi: add retry in try_get_dev_id()Xianting Tian
Use a retry machanism to give the BMC more opportunities to correctly respond when we receive specific completion codes. This is similar to what is done in __get_device_id(). Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Message-Id: <20200916062129.26129-1-tian.xianting@h3c.com> [Moved GET_DEVICE_ID_MAX_RETRY to include/linux/ipmi.h, reworded some text.] Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-09-15ipmi: Clean up some printksCorey Minyard
Convert to dev_xxx() and fix some verbage. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-09-15ipmi:msghandler: retry to get device id on an errorXianting Tian
We fail to get the BMCS's device id with low probability when loading the ipmi driver and it causes BMC device registration failed. When this issue occurs we got below kernel prints: [Wed Sep 9 19:52:03 2020] ipmi_si IPI0001:00: IPMI message handler: device id demangle failed: -22 [Wed Sep 9 19:52:03 2020] IPMI BT: using default values [Wed Sep 9 19:52:03 2020] IPMI BT: req2rsp=5 secs retries=2 [Wed Sep 9 19:52:03 2020] ipmi_si IPI0001:00: Unable to get the device id: -5 [Wed Sep 9 19:52:04 2020] ipmi_si IPI0001:00: Unable to register device: error -5 When this issue happens, we want to manually unload the driver and try to load it again, but it can't be unloaded by 'rmmod' as it is already 'in use'. We add a print in handle_one_recv_msg(), when this issue happens, the msg we received is "Recv: 1c 01 d5", which means the data_len is 1, data[0] is 0xd5 (completion code), which means "bmc cannot execute command. Command, or request parameter(s), not supported in present state". Debug code: static int handle_one_recv_msg(struct ipmi_smi *intf, struct ipmi_smi_msg *msg) { printk("Recv: %*ph\n", msg->rsp_size, msg->rsp); ... ... } Then in ipmi_demangle_device_id(), it returned '-EINVAL' as 'data_len < 7' and 'data[0] != 0'. We created this patch to retry the get device id when this error happens. We reproduced this issue again and the retry succeed on the first retry, we finally got the correct msg and then all is ok: Recv: 1c 01 00 01 81 05 84 02 af db 07 00 01 00 b9 00 10 00 So use a retry machanism in this patch to give bmc more opportunity to correctly response kernel when we received specific completion codes. Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Message-Id: <20200915071817.4484-1-tian.xianting@h3c.com> [Cleaned up the verbage a bit in the header and prints.] Signed-off-by: Corey Minyard <cminyard@mvista.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 00:40:17 +0000