summaryrefslogtreecommitdiff
path: root/drivers/char/ipmi/ipmi_ssif.c
AgeCommit message (Collapse)Author
2019-02-09ipmi:ssif: Change some pr_xxx to dev_xxx callsCorey Minyard
Trying to make things more consistent and compliant with what should be in drivers. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-09ipmi: clean an indentation issue, remove extraneous spaceColin Ian King
Trivial fix to clean up an indentation issue, remove space Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-09ipmi: Make the smi watcher be disabled immediately when not neededCorey Minyard
The code to tell the lower layer to enable or disable watching for certain things was lazy in disabling, it waited until a timer tick to see if a disable was necessary. Not a really big deal, but it could be improved. Modify the code to enable and disable watching immediately and don't do it from the background timer any more. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
2019-02-09ipmi: Fix how the lower layers are told to watch for messagesCorey Minyard
The IPMI driver has a mechanism to tell the lower layers it needs to watch for messages, commands, and watchdogs (so it doesn't needlessly poll). However, it needed some extensions, it needed a way to tell what is being waited for so it could set the timeout appropriately. The update to the lower layer was also being done once a second at best because it was done in the main timeout handler. However, if a command is sent and a response message is coming back, it needed to be started immediately. So modify the code to update immediately if it needs to be enabled. Disable is still lazy. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
2019-02-09ipmi: Fix SSIF flag requestsCorey Minyard
Commit 89986496de141 ("ipmi: Turn off all activity on an idle ipmi interface") modified the IPMI code to only request events when the driver had somethine waiting for events. The SSIF code, however, was using the event fetch request to also fetch the flags. Add a timer and the proper handling for the upper layer telling whether flags fetches are required. Reported-by: Kamlakant Patel <Kamlakant.Patel@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Kamlakant Patel <kamlakant.patel@cavium.com>
2019-01-23ipmi:ssif: Fix handling of multi-part return messagesCorey Minyard
The block number was not being compared right, it was off by one when checking the response. Some statistics wouldn't be incremented properly in some cases. Check to see if that middle-part messages always have 31 bytes of data. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 4.4
2018-10-11ipmi: Fix timer race with module unloadJan Glauber
Please note that below oops is from an older kernel, but the same race seems to be present in the upstream kernel too. ---8<--- The following panic was encountered during removing the ipmi_ssif module: [ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090 [ 526.360464] Mem abort info: [ 526.363257] ESR = 0x86000007 [ 526.366304] Exception class = IABT (current EL), IL = 32 bits [ 526.372221] SET = 0, FnV = 0 [ 526.375269] EA = 0, S1PTW = 0 [ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416 [ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000 [ 526.396141] Internal error: Oops: 86000007 [#1] SMP [ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif] [ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1 [ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018 [ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO) [ 526.489713] pc : 0xffff000006923090 [ 526.493198] lr : call_timer_fn+0x34/0x178 [ 526.497194] sp : ffff000009b0bdd0 [ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082 [ 526.505796] x27: 0000000000000002 x26: ffff000009515188 [ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018 [ 526.516396] x23: ffff000009519660 x22: dead000000000200 [ 526.521696] x21: ffff000006923090 x20: 0000000000000100 [ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000 [ 526.532295] x17: 000000000000000e x16: 0000000000000007 [ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c [ 526.542894] x13: 0000000000000000 x12: 0000000000000000 [ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88 [ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005 [ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020 [ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20 [ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40 [ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40 [ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc) [ 526.586854] Call trace: [ 526.589289] 0xffff000006923090 [ 526.592419] expire_timers+0xc8/0x130 [ 526.596070] run_timer_softirq+0xec/0x1b0 [ 526.600070] __do_softirq+0x134/0x328 [ 526.603726] irq_exit+0xc8/0xe0 [ 526.606857] __handle_domain_irq+0x6c/0xc0 [ 526.610941] gic_handle_irq+0x84/0x188 [ 526.614679] el1_irq+0xe8/0x180 [ 526.617822] cpuidle_enter_state+0xa0/0x328 [ 526.621993] cpuidle_enter+0x34/0x48 [ 526.625564] call_cpuidle+0x44/0x70 [ 526.629040] do_idle+0x1b8/0x1f0 [ 526.632256] cpu_startup_entry+0x2c/0x30 [ 526.636174] secondary_start_kernel+0x11c/0x130 [ 526.640694] Code: bad PC value [ 526.643800] ---[ end trace d020b0b8417c2498 ]--- [ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt [ 526.654778] SMP: stopping secondary CPUs [ 526.658734] Kernel Offset: disabled [ 526.662211] CPU features: 0x5800c38 [ 526.665688] Memory Limit: none [ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Prevent mod_timer from arming a timer that was already removed by del_timer during module unload. Signed-off-by: Jan Glauber <jglauber@cavium.com> Cc: <stable@vger.kernel.org> # 3.19 Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi:ssif: Add support for multi-part transmit messages > 2 partsCorey Minyard
The spec was fairly confusing about how multi-part transmit messages worked, so the original implementation only added support for two part messages. But after talking about it with others and finding something I missed, I think it makes more sense. The spec mentions smbus command 8 in a table at the end of the section on SSIF support as the end transaction. If that works, then all is good and as it should be. However, some implementations seem to use a middle transaction <32 bytes tomark the end because of the confusion in the spec, even though that is an SMBus violation if the number of bytes is zero. So this change adds some tests, if command=8 works, it uses that, otherwise if an empty end transaction works, it uses a middle transaction <32 bytes to mark the end. If neither works, then it limits the size to 63 bytes as it is now. Cc: Harri Hakkarainen <harri@cavium.com> Cc: Bazhenov, Dmitry <dmitry.bazhenov@auriga.com> Cc: Mach, Dat <Dat.Mach@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Remove platform driver overrides and use the id_tableCorey Minyard
The IPMI DMI code was adding platform overrides, which is not really an ideal solution. Switch to using the id_table in the drivers to identify the devices. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Free the address list on module cleanupCorey Minyard
Otherwise the memory is leaked. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Don't leave holes in the I2C address list in the ssif driverCorey Minyard
The algorithm to populate the I2C address list would leave holes in the list on duplicates. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18ipmi: Use more common logging stylesJoe Perches
Add and use #define pr_fmt/dev_fmt, and remove #define PFX This also prefixes some messages that were not previously prefixed. Miscellanea: o Convert printk(KERN_<level> to pr_<level>( o Use %s, __func__ where appropriate Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-08-31ipmi: Fix NULL pointer dereference in ssif_probeGustavo A. R. Silva
There is a potential execution path in which function ssif_info_find() returns NULL, hence there is a NULL pointer dereference when accessing pointer *addr_info* Fix this by null checking *addr_info* before dereferencing it. Addresses-Coverity-ID: 1473145 ("Explicit null dereferenced") Fixes: e333054a91d1 ("ipmi: Fix I2C client removal in the SSIF driver") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-08-31ipmi: Fix I2C client removal in the SSIF driverCorey Minyard
The SSIF driver was removing any client that came in through the platform interface, but it should only remove clients that it added. On a failure in the probe function, this could result in the following oops when the driver is removed and the client gets unregistered twice: CPU: 107 PID: 30266 Comm: rmmod Not tainted 4.18.0+ #80 Hardware name: Cavium Inc. Saber/Saber, BIOS Cavium reference firmware version 7.0 08/04/2018 pstate: 60400009 (nZCv daif +PAN -UAO) pc : kernfs_find_ns+0x28/0x120 lr : kernfs_find_and_get_ns+0x40/0x60 sp : ffff00002310fb50 x29: ffff00002310fb50 x28: ffff800a8240f800 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000056000000 x24: ffff000009073000 x23: ffff000008998b38 x22: 0000000000000000 x21: ffff800ed86de820 x20: 0000000000000000 x19: ffff00000913a1d8 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 5300737265766972 x13: 643d4d4554535953 x12: 0000000000000030 x11: 0000000000000030 x10: 0101010101010101 x9 : ffff800ea06cc3f9 x8 : 0000000000000000 x7 : 0000000000000141 x6 : ffff000009073000 x5 : ffff800adb706b00 x4 : 0000000000000000 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : ffff000008998b38 x0 : ffff000008356760 Process rmmod (pid: 30266, stack limit = 0x00000000e218418d) Call trace: kernfs_find_ns+0x28/0x120 kernfs_find_and_get_ns+0x40/0x60 sysfs_unmerge_group+0x2c/0x6c dpm_sysfs_remove+0x34/0x70 device_del+0x58/0x30c device_unregister+0x30/0x7c i2c_unregister_device+0x84/0x90 [i2c_core] ssif_platform_remove+0x38/0x98 [ipmi_ssif] platform_drv_remove+0x2c/0x6c device_release_driver_internal+0x168/0x1f8 driver_detach+0x50/0xbc bus_remove_driver+0x74/0xe8 driver_unregister+0x34/0x5c platform_driver_unregister+0x20/0x2c cleanup_ipmi_ssif+0x50/0xd82c [ipmi_ssif] __arm64_sys_delete_module+0x1b4/0x220 el0_svc_handler+0x104/0x160 el0_svc+0x8/0xc Code: aa1e03e0 aa0203f6 aa0103f7 d503201f (7940e280) ---[ end trace 09f0e34cce8e2d8c ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x23800c38 So track the clients that the SSIF driver adds and only remove those. Reported-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: George Cherian <george.cherian@cavium.com> Cc: <stable@vger.kernel.org> # 4.14.x
2018-08-31ipmi: Rework SMI registration failureCorey Minyard
There were certain situations where ipmi_register_smi() would return a failure, but the interface would still be registered and would need to be unregistered. This is obviously a bad design and resulted in an oops in certain failure cases. If the interface is started up in ipmi_register_smi(), then an error occurs, shut down the interface there so the cleanup can be done properly. Fix the various smi users, too. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reported-by: Justin Ernst <justin.ernst@hpe.com> Tested-by: Justin Ernst <justin.ernst@hpe.com> Cc: Andrew Banman <abanman@hpe.com> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: <stable@vger.kernel.org> # 4.18.x
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-09ipmi: Remove the proc interfaceCorey Minyard
It has been deprecated long enough, get rid of it. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-19ipmi_ssif: Fix uninitialized variable issueGustavo A. R. Silva
Currently, function ssif_remove returns _rv_, which is a variable that is never initialized. Fix this by removing variable _rv_ and return 0 instead. Addresses-Coverity-ID: 1467999 ("Uninitialized scalar variable") Fixes: 6a0d23ed338e ("ipmi: ipmi_unregister_smi() cannot fail, have it return void") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Remove smi->intf checksCorey Minyard
Due to changes in the way shutdown is done, it is no longer required to check that the interface is set. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_ssif: Get rid of unused intf_numCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: ipmi_unregister_smi() cannot fail, have it return voidCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_ssif: Remove usecount handlingCorey Minyard
Now that we can handle hot remove there is no need for usecounts for interfaces. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_ssif: Convert over to a shutdown handlerCorey Minyard
Move the shutdown handling to a shutdown function called from the IPMI core code. That makes for a cleaner shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Change ipmi_smi_t to struct ipmi_smi *Corey Minyard
Get rid of this coding style violation in the user files. Include files will come later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-03-13ipmi_ssif: Fix kernel panic at msg_done_handlerKamlakant Patel
This happens when BMC doesn't return any data and the code is trying to print the value of data[2]. Getting following crash: [ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002 [ 484.736496] pgd = ffff0000094a2000 [ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000 [ 484.748158] Internal error: Oops: 96000005 [#1] SMP [...] [ 485.101451] Call trace: [...] [ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif] [ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif] [ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138 [ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30 [ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3) Adding a check to validate the data len before printing data[2] to fix this issue. Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-03-12ipmi: Remove ACPI SPMI probing from the SSIF (I2C) driverCorey Minyard
The IPMI spec states: The purpose of the SPMI Table is to provide a mechanism that can be used by the OSPM (an ACPI term for “OS Operating System-directed configuration and Power Management” essentially meaning an ACPI-aware OS or OS loader) very early in the boot process, e.g., before the ability to execute ACPI control methods in the OS is available. When we are probing IPMI in Linux, ACPI control methods are available, so we shouldn't be probing using SPMI. It could cause some confusion during the probing process. Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Jiandi An <anjiandi@codeaurora.org>
2018-02-27ipmi: Add or fix SPDX-License-Identifier in all filesCorey Minyard
And get rid of the license text that is no longer necessary. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alistair Popple <alistair@popple.id.au> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Rocky Craig <rocky.craig@hp.com>
2018-01-22ipmi_ssif: Remove duplicate NULL checkAndy Shevchenko
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-28ipmi: Make the DMI probe into a generic platform probeCorey Minyard
Rework the DMI probe function to be a generic platform probe, and then rework the DMI code (and a few other things) to use the more generic information. This is so other things can declare platform IPMI devices. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi: Make the IPMI proc interface configurableCorey Minyard
So we can remove it later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28ipmi_ssif: Add device attrs for the things in procCorey Minyard
Create a device attribute for everything we show in proc, getting ready for removing the proc stuff. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Remove the device id from ipmi_register_smi()Corey Minyard
It's no longer used, dynamic device id handling is in place now. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27ipmi: Make ipmi_demangle_device_id more genericJeremy Kerr
Currently, ipmi_demagle_device_id requires a full response buffer in its data argument. This means we can't use it to parse a response in a struct ipmi_recv_msg, which has the netfn and cmd as separate bytes. This change alters the definition and users of ipmi_demangle_device_id to use a split netfn, cmd and data buffer, so it can be used with non-sequential responses. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Fixed the ipmi_ssif.c and ipmi_si_intf.c changes to use data from the response, not the data from the message, when passing info to the ipmi_demangle_device_id() function. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-06-30ipmi:ssif: Add missing unlock in error branchCorey Minyard
When getting flags, a response to a different message would result in a deadlock because of a missing unlock. Add that unlock and a comment. Found by static analysis. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org # 3.19 Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-06-28ipmi:ssif: Check dev before setting drvdataCorey Minyard
dev can be NULL. Reported-by: Austin Christ <austinwc@codeaurora.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-06-19ipmi: Convert DMI handling over to a platform deviceCorey Minyard
Now that the IPMI DMI code creates a platform device for IPMI devices in the firmware, use that instead of handling all the DMI work in the IPMI drivers themselves. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Andy Lutomirski <luto@kernel.org>
2017-06-16ipmi:ssif: Use i2c_adapter_id instead of adapter->nrCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-05-17ipmi_ssif: remove redundant null check on array client->adapter->nameColin Ian King
The null check on client->adapter->name is redundant as name is an array of I2C_NAME_SIZE chars and hence can never be null. We may as well remove this redundant check. Detected by CoverityScan, CID#1375918 ("Array compared against 0") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-05-08ipmi_ssif: unlock on allocation failureDan Carpenter
We should unlock and re-enable IRQs if this allocation fails. Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF) ") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-04-07ipmi_ssif: use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-04-07ipmi: Fix kernel panic at ipmi_ssif_thread()Joeseph Chang
msg_written_handler() may set ssif_info->multi_data to NULL when using ipmitool to write fru. Before setting ssif_info->multi_data to NULL, add new local pointer "data_to_send" and store correct i2c data pointer to it to fix NULL pointer kernel panic and incorrect ssif_info->multi_pos. Signed-off-by: Joeseph Chang <joechang@codeaurora.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org # 3.19-
2016-11-24ipmi: Pick up slave address from SMBIOS on an ACPI deviceCorey Minyard
When added by ACPI, the information does not contain the slave address of the BMC. However, that information is available from SMBIOS. So if we add a device that doesn't have a slave address, look at the other devices that are duplicate interfaces and see if they have a slave address. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2016-11-07ipmi_ssif: Remove an unused module parameterCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2016-06-17i2c: add a protocol parameter to the alert callbackBenjamin Tissoires
.alert() is meant to be generic, but there is currently no way for the device driver to know which protocol generated the alert. Add a parameter in .alert() to help the device driver to understand what is given in data. This patch is required to have the support of SMBus Host Notify protocol through .alert(). Tested-by: Andrew Duggan <aduggan@synaptics.com> For hwmon: Acked-by: Guenter Roeck <linux@roeck-us.net> For IPMI: Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-05-16ipmi: Fix the I2C address extraction from SPMI tablesCorey Minyard
Unlike everywhere else in the IPMI specification, the I2C address specified in the SPMI table is not shifted to the left one bit with the LSB zero. Instead it is not shifted with the MSB zero. Reported-by: Sanjeev <singhsan@codeaurora.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2016-03-18ipmi_ssif: Fix logic around alert handlingCorey Minyard
There was a mistake in the logic, if an alert came in very quickly it would hang the driver. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2016-01-12char: ipmi: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-10-24char: ipmi: ipmi_ssif: Replace timeval with timespec64Amitoj Kaur Chawla
This patch replaces timeval with timespec64 as 32 bit 'struct timeval' will not give current time beyond 2038. The patch changes the code to use ktime_get_real_ts64() which returns a 'struct timespec64' instead of do_gettimeofday() which returns a 'struct timeval' This patch also alters the format string in pr_info() for now.tv_sec to incorporate 'long long' on 32 bit architectures. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-03ipmi:ssif: Add a module parm to specify that SMBus alerts don't workCorey Minyard
They are broken on some platforms, this gives people a chance to work around it until the firmware is fixed. Signed-off-by: Corey Minyard <cminyard@mvista.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 18:39:59 +0000