summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
AgeCommit message (Collapse)Author
2018-12-19Bluetooth: hci_bcm: Handle specific unknown packets after firmware loadingJonathan Bakker
The Broadcom controller on aries S5PV210 boards sends out a couple of unknown packets after the firmware is loaded. This will cause logging of errors such as: Bluetooth: hci0: Frame reassembly failed (-84) This is probably also the case with other boards, as there are related Android userspace patches for custom ROMs such as https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/ Since this appears to be intended behaviour, treated them as diagnostic packets. Note that this is another variant of commit 01d5e44ace8a ("Bluetooth: hci_bcm: Handle empty packet after firmware loading") Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: btbcm: Add entry for BCM4329B1 UART bluetoothPaweł Chmiel
This patch adds the device ID for the BCM 4329 combo module used in the Samsung Aries based phones (Galaxy S and it's variants). ``` [ 11.508980] Bluetooth: hci0: BCM: chip id 41 [ 11.518975] Bluetooth: hci0: BCM: features 0x04 [ 11.550132] Bluetooth: hci0: BCM4329B1 [ 11.557046] Bluetooth: hci0: BCM4329B1 (002.002.023) build 0000 [ 13.737071] Bluetooth: hci0: BCM4329B1 (002.002.023) build 0744 ``` Output from hciconfig ``` hci0: Type: Primary Bus: UART BD Address: 43:29:B1:55:00:00 ACL MTU: 1021:6 SCO MTU: 64:1 UP RUNNING RX bytes:1675 acl:0 sco:0 events:145 errors:0 TX bytes:20426 acl:0 sco:0 commands:146 errors:0 Features: 0xbf 0xfe 0x8f 0xfe 0x9b 0xff 0x79 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'aries' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Version: 2.1 (0x4) Revision: 0x2e8 LMP Version: 2.1 (0x4) Subversion: 0x4217 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: btusb: Add support for Intel bluetooth device 8087:0029Raghuram Hegde
Include the new USB product ID for Intel Bluetooth device 22260 family(CcPeak) The /sys/kernel/debug/usb/devices portion for this device is: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0029 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resumeHans de Goede
On many devices the RTL8723BS device gets reset during suspend/resume, causing it to lose its firmware and all state. Testing has shown it drops back to communicating at 115200 bps and sends sync-request packages, indicating it has been fully reset. This commit fixes this by queueing a reprobe on resume. This mirrors how USB RTL BT devices, which have the same problem, are handled in the btusb driver, there we set the USB_QUIRK_RESET_RESUME for all RTL devices, which also causes a reprobe on resume. The only difference is that here we need to do the reprobe ourselves. Since we are doing a full reprobe on resume now, we can also turn off the device on suspend to save power while suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_h5: Add suspend / resume opsHans de Goede
Add support for vendor specific suspend / resume callbacks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_intel: clean an indentation issue, remove extraneous spacesColin Ian King
Trivial fix to clean up an indentation issue, remove spaces Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_serdev: Remove setting of HCI_QUIRK_RESET_ON_CLOSE.Balakrishna Godavarthi
HCI_QUIRK_RESET_ON_CLOSE quirk is required for BT v1.0 based devices, to send a reset command to the chip during hci device close. Serdev architecture is used for the latest BT chips, which doesn't require to send the reset command during close. If still chips required reset command during close, it would be better enabling it in the vendor probes or in proto setup. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: Remove unnecessary smp_mb__after_atomic() barriersAndrea Parri
The barriers are redundant because atomic_test_and_clear_bit() already provides the required full ordering for the cases in question (that is, when the bit is cleared). Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: btbcm: Add default address for BCM43430A0Chen-Yu Tsai
The BCM43430A0 has the default MAC address 43:43:A0:12:1F:AC if none is given. This address was found when enabling Bluetooth on a bunch of boards with the AMPAK AP6210 module, all sharing the same address. It also contains the sequence 4343A0, which is suspicious as that is also the name the chip identifies itself as. Add this to the list of default MAC addresses and leave it to the user to configure a valid one. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_bcm: Add compatible string for BCM4330Chen-Yu Tsai
The BCM4330 chip is a 802.11 a/b/g/n + Bluetooth 4.0 + HS controller. This patch adds a compatible string match to the serdev driver for the Bluetooth part of the chip. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_bcm: Add BCM20702A1 variantMaxime Ripard
The BCM20702A1 chip is a single-chip Bluetooth 4.0 controller and transceiver. It is found in the AMPAK AP6210 WiFi+BT package. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_bcm: Wait for device to come out of reset after power onChen-Yu Tsai
The datasheets for BCM20702 and BCM43438 both have power up time sequence graphs, however they are slightly different. Both chips also have an internal power-on-reset, which holds the chip in reset for a short time after the regulators are enabled. For the BCM20702, the time period from when the regulators are enabled, until the chip settles and comes out of sleep state, is 6564 ~ 8171 us. For the BCM43438, the graph only shows the time period from when the regulators are enabled until the chip responds by driving the host's CTS line low, assuming the host has already driven its RTS line low. This is shown to be 6.5 sleep cycles, with the sleep clock at 32.768 kHz. This is around 2 ms. Wait a full 10 ms after the regulators are enabled to account for signal rising times. Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_bcm: Add support for regulator suppliesChen-Yu Tsai
The Broadcom Bluetooth chips have two power inputs, VBAT and VDDIO. The former provides overall power for the chip, while the latter powers the I/O pins and buffers. Model these two as regulator supplies, and let the driver manage them in the same way as it does the clock supply. Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_bcm: Add support for LPO clockChen-Yu Tsai
The Broadcom Bluetooth controllers support a secondary LPO clock at 32.768 kHz. This external clock provides low power timing, and also a way to detect the frequency of the main reference clock. On many designs without NVRAM and a non-default reference clock, this must be used or the controller will not function correctly. Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_bcm: Use "txco" and "extclk" to get clock referenceChen-Yu Tsai
Originally the device tree binding only specified one clock reference, with the name "extclk". The driver simply retrieves the clock without bothering to specify a name. Since we added a second clock to the binding, we need to fetch the clocks by name now. First we try the new name "txco", then fall back to the old name "extclk", and finally try retrieving a clock without using any name, to cover any instances where a bad device tree or firmware worked by accident. In the last case, we should take care that we don't get the same clock twice when we add support for the "lpo" clock. Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_bcm: Simplify clk_get error handlingChen-Yu Tsai
The driver currently checks the clk pointer for an error condition, as returned by clk_get, before every invocation of the clk consumer API. This is redundant if the goal is simply to ignore the errors, thereby making the clk optional. The clk consumer API already checks if the pointer is NULL or not. Simplify the code a bit by assigning NULL to the clk pointer if the error condition is one we want to ignore, which is every error except deferred probing. Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19Bluetooth: hci_bcm: Handle deferred probing for the clock supplyChen-Yu Tsai
On some systems that actually have the bluetooth controller wired up with an extra clock signal, it's possible the bluetooth controller probes before the clock provider. clk_get would return a defer probe error, which was not handled by this driver. Handle this properly, so that these systems can work reliably. Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-10-24Merge branch 'work.tty-ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull tty ioctl updates from Al Viro: "This is the compat_ioctl work related to tty ioctls. Quite a bit of dead code taken out, all tty-related stuff gone from fs/compat_ioctl.c. A bunch of compat bugs fixed - some still remain, but all more or less generic tty-related ioctls should be covered (remaining issues are in things like driver-private ioctls in a pcmcia serial card driver not getting properly handled in 32bit processes on 64bit host, etc)" * 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (53 commits) kill TIOCSERGSTRUCT change semantics of ldisc ->compat_ioctl() kill TIOCSER[SG]WILD synclink_gt(): fix compat_ioctl() pty: fix compat ioctls compat_ioctl - kill keyboard ioctl handling gigaset: add ->compat_ioctl() vt_compat_ioctl(): clean up, use compat_ptr() properly gigaset: don't try to printk userland buffer contents dgnc: don't bother with (empty) stub for TCXONC dgnc: leave TIOC[GS]SOFTCAR to ldisc remove fallback to drivers for TIOCGICOUNT dgnc: break-related ioctls won't reach ->ioctl() kill the rest of tty COMPAT_IOCTL() entries dgnc: TIOCM... won't reach ->ioctl() isdn_tty: TCSBRK{,P} won't reach ->ioctl() kill capinc_tty_ioctl() take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl() synclink: reduce pointless checks in ->ioctl() complete ->[sg]et_serial() switchover ...
2018-10-18Bluetooth: hci_qca: Add support for controller debug logs.Balakrishna Godavarthi
This patch will prevent error messages splashing on console. [ 78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804 [ 78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804 [ 78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804 [ 78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804 QCA wcn3990 will send the debug logs in the form of ACL packets. While decoding packet in qca_recv(), marking the received debug log packet as diagnostic packet. Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-10-18Bluetooth: btusb: Add support for 0cf3:535b QCA_ROME deviceOwen Lin
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=535b Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms Signed-off-by: Owen Lin <olin@rivetnetworks.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-10-14Bluetooth: btsdio: Do not bind to non-removable BCM43430Cho, Yu-Chen
BCM43430 devices soldered onto the PCB (non-removable) use an UART connection for bluetooth. But also advertise btsdio support on their 3th sdio function. Signed-off-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-10-13change semantics of ldisc ->compat_ioctl()Al Viro
First of all, make it return int. Returning long when native method had never allowed that is ridiculous and inconvenient. More importantly, change the caller; if ldisc ->compat_ioctl() is NULL or returns -ENOIOCTLCMD, tty_compat_ioctl() will try to feed cmd and compat_ptr(arg) to ldisc's native ->ioctl(). That simplifies ->compat_ioctl() instances quite a bit - they only need to deal with ioctls that are neither generic tty ones (those would get shunted off to tty_ioctl()) nor simple compat pointer ones. Note that something like TCFLSH won't reach ->compat_ioctl(), even if ldisc ->ioctl() does handle it - it will be recognized earlier and passed to tty_ioctl() (and ultimately - ldisc ->ioctl()). For many ldiscs it means that NULL ->compat_ioctl() does the right thing. Those where it won't serve (see e.g. n_r3964.c) are also easily dealt with - we need to handle the numeric-argument ioctls (calling the native instance) and, if such would exist, the ioctls that need layout conversion, etc. All in-tree ldiscs dealt with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11Merge tag 'alloc-args-v4.19-rc8' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Kees writes: "Fix open-coded multiplication arguments to allocators - Fixes several new open-coded multiplications added in the 4.19 merge window." * tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Replace more open-coded allocation size multiplications
2018-10-05treewide: Replace more open-coded allocation size multiplicationsKees Cook
As done treewide earlier, this catches several more open-coded allocation size calculations that were added to the kernel during the merge window. This performs the following mechanical transformations using Coccinelle: kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...) kvzalloc(a * b, ...) -> kvcalloc(a, b, ...) devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-09-28Bluetooth: ath3k: add more information to error messageLuiz Carlos Ramos
When there is an error in either ath3k_load_firmware() or ath3k_load_fwfile(), the inlined function ath3k_log_failed_loading() is called receiving the error returned and both the block size requested to load and the size actually loaded. These values are printed in an error message using the macro BT_ERR. This patch changes that function in order to print the variable "count" as well, to show more information when a failing firmware loading operation happens. The calls to the older function were changed to the new one. This event is being monitored in a laptop with an adapter which identifies itself as 0cf3:0036, where sometimes there are errors in the firmware loading process. Signed-off-by: Luiz Carlos Ramos <lramos.prof@yahoo.com.br> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: bt3c_cs: Fix obsolete functionDing Xiang
simple_strtol and simple_strtoul are obsolete, both place use kstrtouint instead. V2: fix error tmp += tn V3: fix compile error Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btrsi: fix bt tx timeout issueSanjay Kumar Konduri
observed sometimes data is coming with unaligned address from kernel BT stack. If unaligned address is passed, some data in payload is stripped when packet is loading to firmware and this results, BT connection timeout is happening. sh# hciconfig hci0 up Can't init device hci0: hci0 command 0x0c03 tx timeout Fixed this by moving the data to aligned address. Signed-off-by: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetoothChristian Hewitt
This patch adds the device ID for the AMPAK AP6335 combo module used in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI chip identifies itself as BCM4339, while Bluetooth identifies itself as BCM4335 (rev C0): ``` [ 4.864248] Bluetooth: hci0: BCM: chip id 86 [ 4.866388] Bluetooth: hci0: BCM: features 0x2f [ 4.889317] Bluetooth: hci0: BCM4335C0 [ 4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000 [ 9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268 ``` Output from hciconfig: ``` hci0: Type: Primary Bus: UART BD Address: 43:39:00:00:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:7567 acl:234 sco:0 events:386 errors:0 TX bytes:53844 acl:77 sco:0 commands:304 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'HUB' Class: 0x0c0000 Service Classes: Rendering, Capturing Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x10c LMP Version: 4.0 (0x6) Subversion: 0x6109 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btrtl: Add support for RTL8822C with USB interfaceAlex Lu
This device is included in the RTL8822CU combination wifi and BT part, as well as the BT part of the RTL8822CE. The necessary firmware has been submitted to the linux-firmware project. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_serdev: Fixed error space required before open paranethesisJagdish Tirumala
Fixed error in space required before paranthesis in drivers/bluetooth/hci_serdev.c Signed-off-by: Jagdish Tirumala <t.jag587@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990Balakrishna Godavarthi
This patch enables power off support for hci down and power on support for hci up. As wcn3990 power sources are ignited by regulators, we will turn off them during hci down, i.e. an complete power off of wcn3990. So while hci up, will call vendor setup which will turn on the regulators, requests BT chip version and download the firmware. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btusb: Add quirk for BTUSB_INTEL_NEWJustin TerAvest
Intel "new" controllers can do both LE scan and BR/EDR inquiry at once. Signed-off-by: Justin TerAvest <teravest@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: btrtl: Make array extension_sig static, shrinks object sizeColin Ian King
Don't populate the array extension_sig on the stack but instead make it static. Makes the object code smaller by 75 bytes: Before: text data bss dec hex filename 14325 4920 0 19245 4b2d drivers/bluetooth/btrtl.o After: text data bss dec hex filename 14186 4984 0 19170 4ae2 drivers/bluetooth/btrtl.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_serdev: Add protocol check in hci_uart_dequeue().Balakrishna Godavarthi
This will help to check the status of protocol while dequeuing an skb packet. In some instaces we will end up kernel crash, where proto close is called and we trying to dequeue an packet. [ 500.142902] [<ffffff80080f9ce4>] do_raw_spin_lock+0x1c/0xe0 [ 500.148643] [<ffffff80088f1c7c>] _raw_spin_lock_irqsave+0x38/0x48 [ 500.154917] [<ffffff8008780ce8>] skb_dequeue+0x28/0x84 [ 500.160209] [<ffffff8000ad6f48>] 0xffffff8000ad6f48 [ 500.165230] [<ffffff8000ad6610>] 0xffffff8000ad6610 [ 500.170257] [<ffffff80080c7ce8>] process_one_work+0x238/0x3e4 [ 500.176174] [<ffffff80080c8330>] worker_thread+0x2bc/0x3d4 [ 500.181821] [<ffffff80080cdabc>] kthread+0x138/0x140 [ 500.186945] [<ffffff80080844e0>] ret_from_fork+0x10/0x18 Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto racesBalakrishna Godavarthi
Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers before running the proto close function pointer. There is chance of kernel crash, due to usage of non proto close function pointers after proto close. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_qca: Remove hdev dereference in qca_close().Balakrishna Godavarthi
When flag KASAN is set, we are seeing an following crash while removing hci_uart module. [ 50.589909] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b73 [ 50.597902] Mem abort info: [ 50.600846] Exception class = DABT (current EL), IL = 32 bits [ 50.606959] SET = 0, FnV = 0 [ 50.610142] EA = 0, S1PTW = 0 [ 50.613396] Data abort info: [ 50.616401] ISV = 0, ISS = 0x00000004 [ 50.620373] CM = 0, WnR = 0 [ 50.623466] [006b6b6b6b6b6b73] address between user and kernel address ranges [ 50.630818] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 50.671670] PC is at qca_power_shutdown+0x28/0x100 [hci_uart] [ 50.677593] LR is at qca_close+0x74/0xb0 [hci_uart] [ 50.775689] Process rmmod (pid: 2144, stack limit = 0xffffff801ba90000) [ 50.782493] Call trace: [ 50.872150] [<ffffff8000c3c81c>] qca_power_shutdown+0x28/0x100 [hci_uart] [ 50.879138] [<ffffff8000c3c968>] qca_close+0x74/0xb0 [hci_uart] [ 50.885238] [<ffffff8000c3a71c>] hci_uart_unregister_device+0x44/0x50 [hci_uart] [ 50.892846] [<ffffff8000c3c9f4>] qca_serdev_remove+0x50/0x5c [hci_uart] [ 50.899654] [<ffffff800844f630>] serdev_drv_remove+0x28/0x38 [ 50.905489] [<ffffff800850fc44>] device_release_driver_internal+0x140/0x1e4 [ 50.912653] [<ffffff800850fd94>] driver_detach+0x78/0x84 [ 50.918121] [<ffffff800850edac>] bus_remove_driver+0x80/0xa8 [ 50.923942] [<ffffff80085107dc>] driver_unregister+0x4c/0x58 [ 50.929768] [<ffffff8000c3ca8c>] qca_deinit+0x24/0x598 [hci_uart] [ 50.936045] [<ffffff8000c3ca10>] hci_uart_exit+0x10/0x48 [hci_uart] [ 50.942495] [<ffffff8008136630>] SyS_delete_module+0x17c/0x224 This crash is due to dereference of hdev, after freeing it. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-27Bluetooth: hci_qca: Remove serdev_device_open/close function callsBalakrishna Godavarthi
Removed serdev_device_open/close functions from qca_open/close as they are called in hci_uart_register_device() and hci_uart_unregister_device() functions. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-11Bluetooth: hci_ldisc: Free rw_semaphore on closeHermes Zhang
The percpu_rw_semaphore is not currently freed, and this leads to a crash when the stale rcu callback is invoked. DEBUG_OBJECTS detects this. ODEBUG: free active (active state 1) object type: rcu_head hint: (null) ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2024 at debug_print_object+0xac/0xc8 PC is at debug_print_object+0xac/0xc8 LR is at debug_print_object+0xac/0xc8 Call trace: [<ffffff80082e2c2c>] debug_print_object+0xac/0xc8 [<ffffff80082e40b0>] debug_check_no_obj_freed+0x1e8/0x228 [<ffffff8008191254>] kfree+0x1cc/0x250 [<ffffff80083cc03c>] hci_uart_tty_close+0x54/0x108 [<ffffff800832e118>] tty_ldisc_close.isra.1+0x40/0x58 [<ffffff800832e14c>] tty_ldisc_kill+0x1c/0x40 [<ffffff800832e3dc>] tty_ldisc_release+0x94/0x170 [<ffffff8008325554>] tty_release_struct+0x1c/0x58 [<ffffff8008326400>] tty_release+0x3b0/0x490 [<ffffff80081a3fe8>] __fput+0x88/0x1d0 [<ffffff80081a418c>] ____fput+0xc/0x18 [<ffffff80080c0624>] task_work_run+0x9c/0xc0 [<ffffff80080a9e24>] do_exit+0x24c/0x8a0 [<ffffff80080aa4e0>] do_group_exit+0x38/0xa0 [<ffffff80080aa558>] __wake_up_parent+0x0/0x28 [<ffffff8008082c00>] el0_svc_naked+0x34/0x38 ---[ end trace bfe08cbd89098cdf ]--- Signed-off-by: Hermes Zhang <chenhuiz@axis.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-21Bluetooth: mediatek: Fix memory leakGustavo A. R. Silva
In case memory resources for *fw* were allocated, release them before return. Addresses-Coverity-ID: 1472611 ("Resource leak") Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-21Bluetooth: Make BT_HCIUART_RTL configuration option depend on ACPIHans de Goede
At the moment we only support ACPI enumeration for serial port attached RTL bluetooth controllers. This commit adds a dependency on ACPI to the BT_HCIUART_RTL configuration option, fixing the following warning when ACPI is not enabled: drivers/bluetooth/hci_h5.c:920:22: warning: 'rtl_vnd' defined but not used Cc: Arnd Bergmann <arnd@arndb.de> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-13Bluetooth: mediatek: pass correct size to h4_recv_buf()Dan Carpenter
We're supposed to pass the number of elements in the mtk_recv_pkts, not the number of bytes. Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-09Bluetooth: Introduce BT_HCIUART_RTL configuration optionMarcel Holtmann
Like all the other UART protocols, introduce a configuration option for Realtek based serial devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-08-07Bluetooth: mediatek: Add protocol support for MediaTek serial devicesSean Wang
This adds a driver based on serdev driver for the MediaTek serial protocol based on running H:4, which can enable the built-in Bluetooth device inside MT7622 SoC. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-06Bluetooth: btqca: Introduce HCI_EV_VENDOR and use itMarcel Holtmann
Using HCI_VENDOR_PKT for vendor specific events does work since it has also the value 0xff, but it is actually the packet type indicator constant and not the event constant. So introduce HCI_EV_VENDOR and use it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-08-04Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEVJohan Hedberg
This driver was recently updated to use serdev, so add the appropriate dependency. Without this one can get compiler warnings like this if CONFIG_SERIAL_DEV_BUS is not enabled: CC [M] drivers/bluetooth/hci_h5.o drivers/bluetooth/hci_h5.c:934:36: warning: ‘h5_serdev_driver’ defined but not used [-Wunused-variable] static struct serdev_device_driver h5_serdev_driver = { ^~~~~~~~~~~~~~~~ Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990Balakrishna Godavarthi
Add support to set voltage/current of various regulators to power up/down Bluetooth chip wcn3990. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: btqca: Add wcn3990 firmware download support.Balakrishna Godavarthi
This patch enables the RAM and NV patch download for wcn3990. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Enable 3.2 Mbps operating speed.Balakrishna Godavarthi
Enable Qualcomm chips to operate at 3.2Mbps. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-08-03Bluetooth: hci_qca: Add wrapper functions for setting UART speedBalakrishna Godavarthi
In function qca_setup, we set initial and operating speeds for Qualcomm Bluetooth SoC's. This block of code is common across different Qualcomm Bluetooth SoC's. Instead of duplicating the code, created a wrapper function to set the speeds. So that future coming SoC's can use these wrapper functions to set speeds. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 10:38:10 +0000