summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2010-10-14drbd: fix possible access after freeLars Ellenberg
If we release the page pointed to by md_io_tmpp, we need to zero out the pointer, too, as that may be used later to decide whether we need to allocate a new page again. Impact: a previously freed page may be used and clobbered. Depending on what that particular page is being used for meanwhile, this may result in silent data corruption of completely unrelated things. Only of concern on devices with logical_block_size != 512 byte, if you re-attach after becoming diskless once. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: protocol compatibility for maximum packet sizesLars Ellenberg
Two missing corner cases to the "maximum packet size" handshake. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Track the reasons to suspend IO in dedicated state bitsPhilipp Reisner
There are three ways to get IO suspended: * Loss of any access to data * Fence-peer-handler running * User requested to suspend IO Track those in different bits, so that one condition clearing its state bit does not interfere with the other two conditions. Only when the user resumes IO he overrules all three bits. The fact is hidden from the user, he sees only a single suspend bit. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: DIV_ROUND_UP not needed hereLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Fixed compatibility with protocol versions smaller than 95Philipp Reisner
Forgot to consider the max size for the resync requests. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: fix for spurious full sync (becoming sync target looked like invalidate)Lars Ellenberg
If a synctarget lost connection while being WFSyncUUID, due to "state sanitizing", the attempted state change to SyncTarget looked like an "invalidate" to after_state_ch() later, thus caused a full sync on next handshake (Bug #318). drbd0: PingAck did not arrive in time. drbd0: peer( Primary -> Unknown ) conn( WFSyncUUID -> NetworkFailure ) pdsk( UpToDate -> DUnknown ) from : { cs:NetworkFailure ro:Secondary/Unknown ds:UpToDate/DUnknown r--- } to : { cs:SyncTarget ro:Secondary/Unknown ds:Inconsistent/DUnknown r--- } after sanizising, resulted in state: { cs:NetworkFailure ro:Secondary/Unknown ds:Inconsistent/DUnknown r--- } drbd0: disk( UpToDate -> Inconsistent ) Fix: don't mask state transition errors in "sanitizing", so the requested state change to SyncTarget fails, instead of being implicitly "remaped" to invalidate. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: cosmetic, don't report resync for online-verifyLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: fix spurious protocol errorLars Ellenberg
If we cannot satisfy a request (because our disk just broke), we still need to drain the payload. Or we'll get a protocol error when interpreting the payload as DRBD packet header. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: fix potential kernel BUG (NULL deref)Lars Ellenberg
BUG trace would look like: lc_find drbd_rs_complete_io got_OVResult drbd_asender Could be triggered by explicit, or IO-error policy based, detach during online-verify. We may only dereference mdev->resync, if we first get_ldev(), as the disk may break any time, causing mdev->resync to disappear once all ldev references have been returned. Already in flight online-verify requests or replies may still come in, which we then need to ignore. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: don't count sendpage()d pages only referenced by tcp as in useLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Adding support for BIO/Request flags: REQ_FUA, REQ_FLUSH and REQ_DISCARDPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: drbd_md_sync before calling user space helpersLars Ellenberg
Just in case we have some pending meta data changes to sync, do it before we call our userland helper, as that may take some time, or even cause a hard reboot. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: fix race on meta-data update, addendumLars Ellenberg
addendum to baa33ae4eaa4477b60af7c434c0ddd1d182c1ae7 The race: drbd_md_sync() if (!test_and_clear_bit(MD_DIRTY, &mdev->flags)) return; ==> RACE with drbd_md_mark_dirty() rearming the timer. del_timer(&mdev->md_sync_timer); Fixed by moving the del_timer before the test_and_clear_bit. Additionally only rearm the timer in drbd_md_mark_dirty, if MD_DIRTY was not already set, reduce the grace period from five to one second, and add an ifdef'ed debuging aid to find code paths missing an explicit drbd_md_sync, if any, as those are the only relevant ones for this race. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Removed a race that could cause unexpected execution of ↵Philipp Reisner
w_make_resync_request() The actual race happened int the drbd_start_resync() function. Where drbd_resync_finished() -> __drbd_set_state() set STOP_SYNC_TIMER and armed the timer. If the timer fired before execution reaches the mod_timer statement at the end of drbd_start_resync() the latter would cause an unexpected call to w_make_resync_request(). Removed the STOP_SYNC_TIMER bit, and base it on the connection state. The STOP_SYNC_TIMER bit probably originates probably the time before the state engine. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: implicitly create unconfigured devices on sync-after dependenciesLars Ellenberg
If pacemaker (for example) decided to initialize minor devices not in the exact sync-after dependency order, the configuration partially failed with an error "The sync-after minor number is invalid". (Bugz. #322) We can avoid that by implicitly creating unconfigured minor devices, if others depend on them. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: fix race on meta-data updateLars Ellenberg
The race: drbd_md_mark_dirty() drbd_md_sync() if (!test_and_clear_bit(MD_DIRTY, &mdev->flags)) return; drbd_md_sync_page_io(mdev, mdev->ldev, sector, WRITE) ==> RACE clear_bit(MD_DIRTY, &mdev->flags); <== spurious Fixed by removing the spurious clear_bit. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: fix race between deconfiguring and reconfiguring networkLars Ellenberg
If a drbd_nl_net_conf hits the small window between the state change to C_STANDALONE and the corresponding cleanup in after_state_ch, that cleanup would throw away stuff we now need again, and later trigger BUG_ON()s. Fixed by properly serializing the new config request with any pending cleanup. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Disable activity log updates when the whole device is out of syncPhilipp Reisner
When the complete device is marked as out of sync, we can disable updates of the on disk AL. Currently AL updates are only disabled if one uses the "invalidate-remote" command on an unconnected, primary device, or when at attach time all bits in the bitmap are set. As of now, AL updated do not get disabled when a all bits becomes set due to application writes to an unconnected DRBD device. While this is a missing feature, it is not considered important, and might get added later. BTW, after initializing a "one legged" DRBD device drbdadm create-md resX drbdadm -- --force primary resX AL updates also get disabled, until the first connect. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Actually allow BIOs up to 128k (was 32k).Philipp Reisner
Now we have multiple BIOs per ee, packets with a 32 bit length field, it gets time to use these goodies. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: receiving of big packets, for payloads between 64kByte and 4GBytePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Sending of big packets, for payloads from 64KByte to 4GBytePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Bugfix for regression introduced with f9bc8913c06022ePhilipp Reisner
If we intent to use the block_id member of an epoch entry, we may not use the digest member. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Microfix: Assigning sector once is sufficientPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: new configuration parameter c-min-rateLars Ellenberg
We now track the data rate of locally submitted resync related requests, and can thus detect non-resync activity on the lower level device. If the current sync rate is above c-min-rate, and the lower level device appears to be busy, we throttle the resyncer. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: reduce code duplication when receiving data requestsLars Ellenberg
also canonicalize the return values of read_for_csum and drbd_rs_begin_io to return -ESOMETHING, or 0 for success. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: use rolling marks for resync speed calculationLars Ellenberg
The current resync speed as displayed in /proc/drbd fluctuates a lot. Using an array of rolling marks makes this calculation much more stable. We used to have this (a long time ago with 0.7), but it got lost somehow. If "stalled", do not discard the rest of the information, just add a " (stalled)" tag to the progress line. This patch also shortens a spinlock critical section somewhat, and reduces the number of atomic operations in put_ldev. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: remove outdated comment and dead codeLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: let drbd_free_ee implicitly free any digestLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Replaced some casts by an union. Improved commentsPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Bugfix: rs_in_flight could become wrong if read_for_csum() requested ↵Philipp Reisner
reschedule later Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: The new, smarter resync speed controllerPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: New sync_param packet, that includes the parameters of the new controllerPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: New sync parameters for the smart resync rate controllerPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: fix list corruption (recent regression)Lars Ellenberg
The commit 288f422ec13667de40b278535d2a5fb5c77352c4 drbd: Track all IO requests on the TL, not writes only moved a list_add_tail(req, ) into a region where req may have just been freed due to conflict detection. Fix this by adding a proper cleanup section for that code path. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Initialize all members of sync_conf to their defaults [Bugz 315]Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Make sure tl_restart(, resend) can not get called multiple times for a ↵Philipp Reisner
new connection Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Do not try to free tl_hash in drbd_disconnect() when IO is suspendedPhilipp Reisner
We may not free tl_hash when IO is suspended, since we can not wait until ap_bio_cnt reaches zero. We can do this after susp reched 0, since then tl_clear was called Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Allow attach while IO is suspendedPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Allow tl_restart() to do IO completion while IO is suspendedPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Fixed a deadlock, probably only affected UP machinesPhilipp Reisner
After disconnect (most likely mdev->net_cnt == 0) and we are still in an unstable state (!drbd_state_is_stable()). When we get an IO request in drbd_get_max_buffers() (called from __inc_ap_bio_cond(), called from inc_ap_bio()) we wake up misc_wait. Misc_wait is also used in inc_ap_bio() to sleep until the outcome of __inc_ap_bio_cond() changes. => Busy loop! Solution: Have a dedicated wait queue for get_net_conf() and put_net_conf(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Do not do a hard state change when establishing a connection [bugz 304]Philipp Reisner
Make sure the state engine can deny two primaries to connect Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Ensure that the peer was not rebootet in the meantime before resending TLPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Delayed creation of current-UUIDPhilipp Reisner
When a fencing policy of "resource-and-stonith" is configured, and DRBD looses connection to it's peer, we can delay the creation of a new current-UUID until IO gets thawed. That allows one to deploy fence-peer handlers that actually commit suicide on the machine they get started. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Run the fence-peer helper asynchronouslyPhilipp Reisner
Since we can not thaw the transfer log, the next logical step is to allow reconnects while the fence-peer handler runs. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Reduce the verbosity of some state transitionsPhilipp Reisner
State transitions in the space of non-allowed states used to be very noisy. Reduce that, since that has little value for the majority of the user base. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Removing a by now obsolete clause in the state sanitizingPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Now we need to handle the ed_uuid of an diskless, unconnected primary ↵Philipp Reisner
correctly Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Disabled the crashed_primary detection for re-attach of last data ↵Philipp Reisner
while IO is frozen Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Do not allow a fencing-policy of resource-and-stonith with protocol APhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Finished the "on-no-data-accessible suspend-io;" functionalityPhilipp Reisner
When no data is accessible (no connection to the peer, nor a local disk) allow the user to select to freeze all IO operations instead of getting IO errors. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>