summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2016-05-26Merge tag 'dax-misc-for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull misc DAX updates from Vishal Verma: "DAX error handling for 4.7 - Until now, dax has been disabled if media errors were found on any device. This enables the use of DAX in the presence of these errors by making all sector-aligned zeroing go through the driver. - The driver (already) has the ability to clear errors on writes that are sent through the block layer using 'DSMs' defined in ACPI 6.1. Other misc changes: - When mounting DAX filesystems, check to make sure the partition is page aligned. This is a requirement for DAX, and previously, we allowed such unaligned mounts to succeed, but subsequent reads/writes would fail. - Misc/cleanup fixes from Jan that remove unused code from DAX related to zeroing, writeback, and some size checks" * tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: fix a comment in dax_zero_page_range and dax_truncate_page dax: for truncate/hole-punch, do zeroing through the driver if possible dax: export a low-level __dax_zero_page_range helper dax: use sb_issue_zerout instead of calling dax_clear_sectors dax: enable dax in the presence of known media errors (badblocks) dax: fallback from pmd to pte on error block: Update blkdev_dax_capable() for consistency xfs: Add alignment check for DAX mount ext2: Add alignment check for DAX mount ext4: Add alignment check for DAX mount block: Add bdev_dax_supported() for dax mount checks block: Add vfs_msg() interface dax: Remove redundant inode size checks dax: Remove pointless writeback from dax_do_io() dax: Remove zeroing from dax_io() dax: Remove dead zeroing code from fault handlers ext2: Avoid DAX zeroing to corrupt data ext2: Fix block zeroing in ext2_get_blocks() for DAX dax: Remove complete_unwritten argument DAX: move RADIX_DAX_ definitions to dax.c
2016-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "This changeset has a few main parts: - Ilya has finished a huge refactoring effort to sync up the client-side logic in libceph with the user-space client code, which has evolved significantly over the last couple years, with lots of additional behaviors (e.g., how requests are handled when cluster is full and transitions from full to non-full). This structure of the code is more closely aligned with userspace now such that it will be much easier to maintain going forward when behavior changes take place. There are some locking improvements bundled in as well. - Zheng adds multi-filesystem support (multiple namespaces within the same Ceph cluster) - Zheng has changed the readdir offsets and directory enumeration so that dentry offsets are hash-based and therefore stable across directory fragmentation events on the MDS. - Zheng has a smorgasbord of bug fixes across fs/ceph" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits) ceph: fix wake_up_session_cb() ceph: don't use truncate_pagecache() to invalidate read cache ceph: SetPageError() for writeback pages if writepages fails ceph: handle interrupted ceph_writepage() ceph: make ceph_update_writeable_page() uninterruptible libceph: make ceph_osdc_wait_request() uninterruptible ceph: handle -EAGAIN returned by ceph_update_writeable_page() ceph: make fault/page_mkwrite return VM_FAULT_OOM for -ENOMEM ceph: block non-fatal signals for fault/page_mkwrite ceph: make logical calculation functions return bool ceph: tolerate bad i_size for symlink inode ceph: improve fragtree change detection ceph: keep leaf frag when updating fragtree ceph: fix dir_auth check in ceph_fill_dirfrag() ceph: don't assume frag tree splits in mds reply are sorted ceph: fix inode reference leak ceph: using hash value to compose dentry offset ceph: don't forbid marking directory complete after forward seek ceph: record 'offset' for each entry of readdir result ceph: define 'end/complete' in readdir reply as bit flags ...
2016-05-26libceph: replace ceph_monc_request_next_osdmap()Ilya Dryomov
... with a wrapper around maybe_request_map() - no need for two osdmap-specific functions. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: async MON client generic requestsIlya Dryomov
For map check, we are going to need to send CEPH_MSG_MON_GET_VERSION messages asynchronously and get a callback on completion. Refactor MON client to allow firing off generic requests asynchronously and add an async variant of ceph_monc_get_version(). ceph_monc_do_statfs() is switched over and remains sync. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph, rbd: ceph_osd_linger_request, watch/notify v2Ilya Dryomov
This adds support and switches rbd to a new, more reliable version of watch/notify protocol. As with the OSD client update, this is mostly about getting the right structures linked into the right places so that reconnects are properly sent when needed. watch/notify v2 also requires sending regular pings to the OSDs - send_linger_ping(). A major change from the old watch/notify implementation is the introduction of ceph_osd_linger_request - linger requests no longer piggy back on ceph_osd_request. ceph_osd_event has been merged into ceph_osd_linger_request. All the details are now hidden within libceph, the interface consists of a simple pair of watch/unwatch functions and ceph_osdc_notify_ack(). ceph_osdc_watch() does return ceph_osd_linger_request, but only to keep the lifetime management simple. ceph_osdc_notify_ack() accepts an optional data payload, which is relayed back to the notifier. Portions of this patch are loosely based on work by Douglas Fuller <dfuller@redhat.com> and Mike Christie <michaelc@cs.wisc.edu>. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26rbd: rbd_dev_header_unwatch_sync() variantIlya Dryomov
Introduce __rbd_dev_header_unwatch_sync(), which doesn't flush notify callbacks. This is for the new rados_watcherrcb_t, which would be called from a notify callback. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: drop msg argument from ceph_osdc_callback_tIlya Dryomov
finish_read(), its only user, uses it to get to hdr.data_len, which is what ->r_result is set to on success. This gains us the ability to safely call callbacks from contexts other than reply, e.g. map check. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: switch to calc_target(), part 2Ilya Dryomov
The crux of this is getting rid of ceph_osdc_build_request(), so that MOSDOp can be encoded not before but after calc_target() calculates the actual target. Encoding now happens within ceph_osdc_start_request(). Also nuked is the accompanying bunch of pointers into the encoded buffer that was used to update fields on each send - instead, the entire front is re-encoded. If we want to support target->name_len != base->name_len in the future, there is no other way, because oid is surrounded by other fields in the encoded buffer. Encoding OSD ops and adding data items to the request message were mixed together in osd_req_encode_op(). While we want to re-encode OSD ops, we don't want to add duplicate data items to the message when resending, so all call to ceph_osdc_msg_data_add() are factored out into a new setup_request_data(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26rbd: use header_oid instead of header_nameIlya Dryomov
Switch to ceph_object_id and use ceph_oid_aprintf() instead of a bare const char *. This reduces noise in rbd_dev_header_name(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: variable-sized ceph_object_idIlya Dryomov
Currently ceph_object_id can hold object names of up to 100 (CEPH_MAX_OID_NAME_LEN) characters. This is enough for all use cases, expect one - long rbd image names: - a format 1 header is named "<imgname>.rbd" - an object that points to a format 2 header is named "rbd_id.<imgname>" We operate on these potentially long-named objects during rbd map, and, for format 1 images, during header refresh. (A format 2 header name is a small system-generated string.) Lift this 100 character limit by making ceph_object_id be able to point to an externally-allocated string. Apart from being able to work with almost arbitrarily-long named objects, this allows us to reduce the size of ceph_object_id from >100 bytes to 64 bytes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26libceph: move message allocation out of ceph_osdc_alloc_request()Ilya Dryomov
The size of ->r_request and ->r_reply messages depends on the size of the object name (ceph_object_id), while the size of ceph_osd_request is fixed. Move message allocation into a separate function that would have to be called after ceph_object_id and ceph_object_locator (which is also going to become variable in size with RADOS namespaces) have been filled in: req = ceph_osdc_alloc_request(...); <fill in req->r_base_oid> <fill in req->r_base_oloc> ceph_osdc_alloc_messages(req); Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26rbd: get/put img_request in rbd_img_request_submit()Ilya Dryomov
By the time we get to checking for_each_obj_request_safe(img_request) terminating condition, all obj_requests may be complete and img_request ref, that rbd_img_request_submit() takes away from its caller, may be put. Moving the next_obj_request cursor is then a use-after-free on img_request. It's totally benign, as the value that's read is never used, but I think it's still worth fixing. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-20zram: introduce per-device debug_stat sysfs nodeSergey Senozhatsky
debug_stat sysfs is read-only and represents various debugging data that zram developers may need. This file is not meant to be used by anyone else: its content is not documented and will change any time w/o any notice. Therefore, the output of debug_stat file contains a version string. To avoid any confusion, we will increase the version number every time we modify the output. At the moment this file exports only one value -- the number of re-compressions, IOW, the number of times compression fast path has failed. This stat is temporary any will be useful in case if any per-cpu compression streams regressions will be reported. Link: http://lkml.kernel.org/r/20160513230834.GB26763@bbox Link: http://lkml.kernel.org/r/20160511134553.12655-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20zram: remove max_comp_streams internalsSergey Senozhatsky
Remove the internal part of max_comp_streams interface, since we switched to per-cpu streams. We will keep RW max_comp_streams attr around, because: a) we may (silently) switch back to idle compression streams list and don't want to disturb user space b) max_comp_streams attr must wait for the next 'lay off cycle'; we give user space 2 years to adjust before we remove/downgrade the attr, and there are already several attrs scheduled for removal in 4.11, so it's too late for max_comp_streams. This slightly change a user visible behaviour: - First, reading from max_comp_stream file now will always return the number of online CPUs. - Second, writing to max_comp_stream will not take any effect. Link: http://lkml.kernel.org/r/20160503165546.25201-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20zram: user per-cpu compression streamsSergey Senozhatsky
Remove idle streams list and keep compression streams in per-cpu data. This removes two contented spin_lock()/spin_unlock() calls from write path and also prevent write OP from being preempted while holding the compression stream, which can cause slow downs. For instance, let's assume that we have N cpus and N-2 max_comp_streams.TASK1 owns the last idle stream, TASK2-TASK3 come in with the write requests: TASK1 TASK2 TASK3 zram_bvec_write() spin_lock find stream spin_unlock compress <<preempted>> zram_bvec_write() spin_lock find stream spin_unlock no_stream schedule zram_bvec_write() spin_lock find_stream spin_unlock no_stream schedule spin_lock release stream spin_unlock wake up TASK2 not only TASK2 and TASK3 will not get the stream, TASK1 will be preempted in the middle of its operation; while we would prefer it to finish compression and release the stream. Test environment: x86_64, 4 CPU box, 3G zram, lzo The following fio tests were executed: read, randread, write, randwrite, rw, randrw with the increasing number of jobs from 1 to 10. 4 streams 8 streams per-cpu =========================================================== jobs1 READ: 2520.1MB/s 2566.5MB/s 2491.5MB/s READ: 2102.7MB/s 2104.2MB/s 2091.3MB/s WRITE: 1355.1MB/s 1320.2MB/s 1378.9MB/s WRITE: 1103.5MB/s 1097.2MB/s 1122.5MB/s READ: 434013KB/s 435153KB/s 439961KB/s WRITE: 433969KB/s 435109KB/s 439917KB/s READ: 403166KB/s 405139KB/s 403373KB/s WRITE: 403223KB/s 405197KB/s 403430KB/s jobs2 READ: 7958.6MB/s 8105.6MB/s 8073.7MB/s READ: 6864.9MB/s 6989.8MB/s 7021.8MB/s WRITE: 2438.1MB/s 2346.9MB/s 3400.2MB/s WRITE: 1994.2MB/s 1990.3MB/s 2941.2MB/s READ: 981504KB/s 973906KB/s 1018.8MB/s WRITE: 981659KB/s 974060KB/s 1018.1MB/s READ: 937021KB/s 938976KB/s 987250KB/s WRITE: 934878KB/s 936830KB/s 984993KB/s jobs3 READ: 13280MB/s 13553MB/s 13553MB/s READ: 11534MB/s 11785MB/s 11755MB/s WRITE: 3456.9MB/s 3469.9MB/s 4810.3MB/s WRITE: 3029.6MB/s 3031.6MB/s 4264.8MB/s READ: 1363.8MB/s 1362.6MB/s 1448.9MB/s WRITE: 1361.9MB/s 1360.7MB/s 1446.9MB/s READ: 1309.4MB/s 1310.6MB/s 1397.5MB/s WRITE: 1307.4MB/s 1308.5MB/s 1395.3MB/s jobs4 READ: 20244MB/s 20177MB/s 20344MB/s READ: 17886MB/s 17913MB/s 17835MB/s WRITE: 4071.6MB/s 4046.1MB/s 6370.2MB/s WRITE: 3608.9MB/s 3576.3MB/s 5785.4MB/s READ: 1824.3MB/s 1821.6MB/s 1997.5MB/s WRITE: 1819.8MB/s 1817.4MB/s 1992.5MB/s READ: 1765.7MB/s 1768.3MB/s 1937.3MB/s WRITE: 1767.5MB/s 1769.1MB/s 1939.2MB/s jobs5 READ: 18663MB/s 18986MB/s 18823MB/s READ: 16659MB/s 16605MB/s 16954MB/s WRITE: 3912.4MB/s 3888.7MB/s 6126.9MB/s WRITE: 3506.4MB/s 3442.5MB/s 5519.3MB/s READ: 1798.2MB/s 1746.5MB/s 1935.8MB/s WRITE: 1792.7MB/s 1740.7MB/s 1929.1MB/s READ: 1727.6MB/s 1658.2MB/s 1917.3MB/s WRITE: 1726.5MB/s 1657.2MB/s 1916.6MB/s jobs6 READ: 21017MB/s 20922MB/s 21162MB/s READ: 19022MB/s 19140MB/s 18770MB/s WRITE: 3968.2MB/s 4037.7MB/s 6620.8MB/s WRITE: 3643.5MB/s 3590.2MB/s 6027.5MB/s READ: 1871.8MB/s 1880.5MB/s 2049.9MB/s WRITE: 1867.8MB/s 1877.2MB/s 2046.2MB/s READ: 1755.8MB/s 1710.3MB/s 1964.7MB/s WRITE: 1750.5MB/s 1705.9MB/s 1958.8MB/s jobs7 READ: 21103MB/s 20677MB/s 21482MB/s READ: 18522MB/s 18379MB/s 19443MB/s WRITE: 4022.5MB/s 4067.4MB/s 6755.9MB/s WRITE: 3691.7MB/s 3695.5MB/s 5925.6MB/s READ: 1841.5MB/s 1933.9MB/s 2090.5MB/s WRITE: 1842.7MB/s 1935.3MB/s 2091.9MB/s READ: 1832.4MB/s 1856.4MB/s 1971.5MB/s WRITE: 1822.3MB/s 1846.2MB/s 1960.6MB/s jobs8 READ: 20463MB/s 20194MB/s 20862MB/s READ: 18178MB/s 17978MB/s 18299MB/s WRITE: 4085.9MB/s 4060.2MB/s 7023.8MB/s WRITE: 3776.3MB/s 3737.9MB/s 6278.2MB/s READ: 1957.6MB/s 1944.4MB/s 2109.5MB/s WRITE: 1959.2MB/s 1946.2MB/s 2111.4MB/s READ: 1900.6MB/s 1885.7MB/s 2082.1MB/s WRITE: 1896.2MB/s 1881.4MB/s 2078.3MB/s jobs9 READ: 19692MB/s 19734MB/s 19334MB/s READ: 17678MB/s 18249MB/s 17666MB/s WRITE: 4004.7MB/s 4064.8MB/s 6990.7MB/s WRITE: 3724.7MB/s 3772.1MB/s 6193.6MB/s READ: 1953.7MB/s 1967.3MB/s 2105.6MB/s WRITE: 1953.4MB/s 1966.7MB/s 2104.1MB/s READ: 1860.4MB/s 1897.4MB/s 2068.5MB/s WRITE: 1858.9MB/s 1895.9MB/s 2066.8MB/s jobs10 READ: 19730MB/s 19579MB/s 19492MB/s READ: 18028MB/s 18018MB/s 18221MB/s WRITE: 4027.3MB/s 4090.6MB/s 7020.1MB/s WRITE: 3810.5MB/s 3846.8MB/s 6426.8MB/s READ: 1956.1MB/s 1994.6MB/s 2145.2MB/s WRITE: 1955.9MB/s 1993.5MB/s 2144.8MB/s READ: 1852.8MB/s 1911.6MB/s 2075.8MB/s WRITE: 1855.7MB/s 1914.6MB/s 2078.1MB/s perf stat 4 streams 8 streams per-cpu ==================================================================================================================== jobs1 stalled-cycles-frontend 23,174,811,209 ( 38.21%) 23,220,254,188 ( 38.25%) 23,061,406,918 ( 38.34%) stalled-cycles-backend 11,514,174,638 ( 18.98%) 11,696,722,657 ( 19.27%) 11,370,852,810 ( 18.90%) instructions 73,925,005,782 ( 1.22) 73,903,177,632 ( 1.22) 73,507,201,037 ( 1.22) branches 14,455,124,835 ( 756.063) 14,455,184,779 ( 755.281) 14,378,599,509 ( 758.546) branch-misses 69,801,336 ( 0.48%) 80,225,529 ( 0.55%) 72,044,726 ( 0.50%) jobs2 stalled-cycles-frontend 49,912,741,782 ( 46.11%) 50,101,189,290 ( 45.95%) 32,874,195,633 ( 35.11%) stalled-cycles-backend 27,080,366,230 ( 25.02%) 27,949,970,232 ( 25.63%) 16,461,222,706 ( 17.58%) instructions 122,831,629,690 ( 1.13) 122,919,846,419 ( 1.13) 121,924,786,775 ( 1.30) branches 23,725,889,239 ( 692.663) 23,733,547,140 ( 688.062) 23,553,950,311 ( 794.794) branch-misses 90,733,041 ( 0.38%) 96,320,895 ( 0.41%) 84,561,092 ( 0.36%) jobs3 stalled-cycles-frontend 66,437,834,608 ( 45.58%) 63,534,923,344 ( 43.69%) 42,101,478,505 ( 33.19%) stalled-cycles-backend 34,940,799,661 ( 23.97%) 34,774,043,148 ( 23.91%) 21,163,324,388 ( 16.68%) instructions 171,692,121,862 ( 1.18) 171,775,373,044 ( 1.18) 170,353,542,261 ( 1.34) branches 32,968,962,622 ( 628.723) 32,987,739,894 ( 630.512) 32,729,463,918 ( 717.027) branch-misses 111,522,732 ( 0.34%) 110,472,894 ( 0.33%) 99,791,291 ( 0.30%) jobs4 stalled-cycles-frontend 98,741,701,675 ( 49.72%) 94,797,349,965 ( 47.59%) 54,535,655,381 ( 33.53%) stalled-cycles-backend 54,642,609,615 ( 27.51%) 55,233,554,408 ( 27.73%) 27,882,323,541 ( 17.14%) instructions 220,884,807,851 ( 1.11) 220,930,887,273 ( 1.11) 218,926,845,851 ( 1.35) branches 42,354,518,180 ( 592.105) 42,362,770,587 ( 590.452) 41,955,552,870 ( 716.154) branch-misses 138,093,449 ( 0.33%) 131,295,286 ( 0.31%) 121,794,771 ( 0.29%) jobs5 stalled-cycles-frontend 116,219,747,212 ( 48.14%) 110,310,397,012 ( 46.29%) 66,373,082,723 ( 33.70%) stalled-cycles-backend 66,325,434,776 ( 27.48%) 64,157,087,914 ( 26.92%) 32,999,097,299 ( 16.76%) instructions 270,615,008,466 ( 1.12) 270,546,409,525 ( 1.14) 268,439,910,948 ( 1.36) branches 51,834,046,557 ( 599.108) 51,811,867,722 ( 608.883) 51,412,576,077 ( 729.213) branch-misses 158,197,086 ( 0.31%) 142,639,805 ( 0.28%) 133,425,455 ( 0.26%) jobs6 stalled-cycles-frontend 138,009,414,492 ( 48.23%) 139,063,571,254 ( 48.80%) 75,278,568,278 ( 32.80%) stalled-cycles-backend 79,211,949,650 ( 27.68%) 79,077,241,028 ( 27.75%) 37,735,797,899 ( 16.44%) instructions 319,763,993,731 ( 1.12) 319,937,782,834 ( 1.12) 316,663,600,784 ( 1.38) branches 61,219,433,294 ( 595.056) 61,250,355,540 ( 598.215) 60,523,446,617 ( 733.706) branch-misses 169,257,123 ( 0.28%) 154,898,028 ( 0.25%) 141,180,587 ( 0.23%) jobs7 stalled-cycles-frontend 162,974,812,119 ( 49.20%) 159,290,061,987 ( 48.43%) 88,046,641,169 ( 33.21%) stalled-cycles-backend 92,223,151,661 ( 27.84%) 91,667,904,406 ( 27.87%) 44,068,454,971 ( 16.62%) instructions 369,516,432,430 ( 1.12) 369,361,799,063 ( 1.12) 365,290,380,661 ( 1.38) branches 70,795,673,950 ( 594.220) 70,743,136,124 ( 597.876) 69,803,996,038 ( 732.822) branch-misses 181,708,327 ( 0.26%) 165,767,821 ( 0.23%) 150,109,797 ( 0.22%) jobs8 stalled-cycles-frontend 185,000,017,027 ( 49.30%) 182,334,345,473 ( 48.37%) 99,980,147,041 ( 33.26%) stalled-cycles-backend 105,753,516,186 ( 28.18%) 107,937,830,322 ( 28.63%) 51,404,177,181 ( 17.10%) instructions 418,153,161,055 ( 1.11) 418,308,565,828 ( 1.11) 413,653,475,581 ( 1.38) branches 80,035,882,398 ( 592.296) 80,063,204,510 ( 589.843) 79,024,105,589 ( 730.530) branch-misses 199,764,528 ( 0.25%) 177,936,926 ( 0.22%) 160,525,449 ( 0.20%) jobs9 stalled-cycles-frontend 210,941,799,094 ( 49.63%) 204,714,679,254 ( 48.55%) 114,251,113,756 ( 33.96%) stalled-cycles-backend 122,640,849,067 ( 28.85%) 122,188,553,256 ( 28.98%) 58,360,041,127 ( 17.35%) instructions 468,151,025,415 ( 1.10) 467,354,869,323 ( 1.11) 462,665,165,216 ( 1.38) branches 89,657,067,510 ( 585.628) 89,411,550,407 ( 588.990) 88,360,523,943 ( 730.151) branch-misses 218,292,301 ( 0.24%) 191,701,247 ( 0.21%) 178,535,678 ( 0.20%) jobs10 stalled-cycles-frontend 233,595,958,008 ( 49.81%) 227,540,615,689 ( 49.11%) 160,341,979,938 ( 43.07%) stalled-cycles-backend 136,153,676,021 ( 29.03%) 133,635,240,742 ( 28.84%) 65,909,135,465 ( 17.70%) instructions 517,001,168,497 ( 1.10) 516,210,976,158 ( 1.11) 511,374,038,613 ( 1.37) branches 98,911,641,329 ( 585.796) 98,700,069,712 ( 591.583) 97,646,761,028 ( 728.712) branch-misses 232,341,823 ( 0.23%) 199,256,308 ( 0.20%) 183,135,268 ( 0.19%) per-cpu streams tend to cause significantly less stalled cycles; execute less branches and hit less branch-misses. perf stat reported execution time 4 streams 8 streams per-cpu ==================================================================== jobs1 seconds elapsed 20.909073870 20.875670495 20.817838540 jobs2 seconds elapsed 18.529488399 18.720566469 16.356103108 jobs3 seconds elapsed 18.991159531 18.991340812 16.766216066 jobs4 seconds elapsed 19.560643828 19.551323547 16.246621715 jobs5 seconds elapsed 24.746498464 25.221646740 20.696112444 jobs6 seconds elapsed 28.258181828 28.289765505 22.885688857 jobs7 seconds elapsed 32.632490241 31.909125381 26.272753738 jobs8 seconds elapsed 35.651403851 36.027596308 29.108024711 jobs9 seconds elapsed 40.569362365 40.024227989 32.898204012 jobs10 seconds elapsed 44.673112304 43.874898137 35.632952191 Please see Link: http://marc.info/?l=linux-kernel&m=146166970727530 Link: http://marc.info/?l=linux-kernel&m=146174716719650 for more test results (under low memory conditions). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20zsmalloc: require GFP in zs_malloc()Sergey Senozhatsky
Pass GFP flags to zs_malloc() instead of using a fixed mask supplied to zs_create_pool(), so we can be more flexible, but, more importantly, we need this to switch zram to per-cpu compression streams -- zram will try to allocate handle with preemption disabled in a fast path and switch to a slow path (using different gfp mask) if the fast one has failed. Apart from that, this also align zs_malloc() interface with zspool/zbud. [sergey.senozhatsky@gmail.com: pass GFP flags to zs_malloc() instead of using a fixed mask] Link: http://lkml.kernel.org/r/20160429150942.GA637@swordfish Link: http://lkml.kernel.org/r/20160429150942.GA637@swordfish Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19mm: rename _count, field of the struct page, to _refcountJoonsoo Kim
Many developers already know that field for reference count of the struct page is _count and atomic type. They would try to handle it directly and this could break the purpose of page reference count tracepoint. To prevent direct _count modification, this patch rename it to _refcount and add warning message on the code. After that, developer who need to handle reference count will find that field should not be accessed directly. [akpm@linux-foundation.org: fix comments, per Vlastimil] [akpm@linux-foundation.org: Documentation/vm/transhuge.txt too] [sfr@canb.auug.org.au: sync ethernet driver changes] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Yuval Mintz <yuval.mintz@qlogic.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-18dax: enable dax in the presence of known media errors (badblocks)Dan Williams
1/ If a mapping overlaps a bad sector fail the request. 2/ Do not opportunistically report more dax-capable capacity than is requested when errors present. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> [vishal: fix a conflict with system RAM collision patches] [vishal: add a 'size' parameter to ->direct_access] [vishal: fix a conflict with DAX alignment check patches] Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
2016-05-17Merge branch 'for-4.7/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "On top of the core pull request, this is the drivers pull request for this merge window. This contains: - Switch drivers to the new write back cache API, and kill off the flush flags. From me. - Kill the discard support for the STEC pci-e flash driver. It's trivially broken, and apparently unmaintained, so it's safer to just remove it. From Jeff Moyer. - A set of lightnvm updates from the usual suspects (Matias/Javier, and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei Tao. - A set of updates for NVMe: - Turn the controller state management into a proper state machine. From Christoph. - Shuffling of code in preparation for NVMe-over-fabrics, also from Christoph. - Cleanup of the command prep part from Ming Lin. - Rewrite of the discard support from Ming Lin. - Deadlock fix for namespace removal from Ming Lin. - Use the now exported blk-mq tag helper for IO termination. From Sagi. - Various little fixes from Christoph, Guilherme, Keith, Ming Lin, Wang Sheng-Hui. - Convert mtip32xx to use the now exported blk-mq tag iter function, from Keith" * 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits) lightnvm: reserved space calculation incorrect lightnvm: rename nr_pages to nr_ppas on nvm_rq lightnvm: add is_cached entry to struct ppa_addr lightnvm: expose gennvm_mark_blk to targets lightnvm: remove mgt targets on mgt removal lightnvm: pass dma address to hardware rather than pointer lightnvm: do not assume sequential lun alloc. nvme/lightnvm: Log using the ctrl named device lightnvm: rename dma helper functions lightnvm: enable metadata to be sent to device lightnvm: do not free unused metadata on rrpc lightnvm: fix out of bound ppa lun id on bb tbl lightnvm: refactor set_bb_tbl for accepting ppa list lightnvm: move responsibility for bad blk mgmt to target lightnvm: make nvm_set_rqd_ppalist() aware of vblks lightnvm: remove struct factory_blks lightnvm: refactor device ops->get_bb_tbl() lightnvm: introduce nvm_for_each_lun_ppa() macro lightnvm: refactor dev->online_target to global nvm_targets lightnvm: rename nvm_targets to nvm_tgt_type ...
2016-05-17Merge branch 'for-4.7/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer updates from Jens Axboe: "This is the core block IO changes for this merge window. Nothing earth shattering in here, it's mostly just fixes. In detail: - Fix for a long standing issue where wrong ordering in blk-mq caused order_to_size() to spew a warning. From Bart. - Async discard support from Christoph. Basically just splitting our sync interface into a submit + wait part. - Add a cleaner interface for flagging whether a device has a write back cache or not. We've previously overloaded blk_queue_flush() with this, but let's make it more explicit. Drivers cleaned up and updated in the drivers pull request. From me. - Fix for a double check for whether IO accounting is enabled or not. From Michael Callahan. - Fix for the async discard from Mike Snitzer, reinstating the early EOPNOTSUPP return if the device doesn't support discards. - Also from Mike, export bio_inc_remaining() so dm can drop it's private copy of it. - From Ming Lin, add support for passing in an offset for request payloads. - Tag function export from Sagi, which will be used in NVMe in the drivers pull. - Two blktrace related fixes from Shaohua. - Propagate NOMERGE flag when making a request from a bio, also from Shaohua. - An optimization to not parse cgroup paths in blk-throttle, if we don't need to. From Shaohua" * 'for-4.7/core' of git://git.kernel.dk/linux-block: blk-mq: fix undefined behaviour in order_to_size() blk-throttle: don't parse cgroup path if trace isn't enabled blktrace: add missed mask name blktrace: delete garbage for message trace block: make bio_inc_remaining() interface accessible again block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discard block: Minor blk_account_io_start usage cleanup block: add __blkdev_issue_discard block: remove struct bio_batch block: copy NOMERGE flag from bio to request block: add ability to flag write back caching on a device blk-mq: Export tagset iter function block: add offset in blk_add_request_payload() writeback: Fix performance regression in wb_over_bg_thresh()
2016-05-10block/drbd: align properly u64 in nl messagesNicolas Dichtel
The attribute 0 is never used in drbd, so let's use it as pad attribute in netlink messages. This minimizes the patch. Note that this patch is only compile-tested. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28rbd: report unsupported features to syslogIlya Dryomov
... instead of just returning an error. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-28rbd: fix rbd map vs notify racesIlya Dryomov
A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-25skd: remove broken discard supportJeff Moyer
Simply creating a file system on an skd device, followed by mount and fstrim will result in errors in the logs and then a BUG(). Let's remove discard support from that driver. As far as I can tell, it hasn't worked right since it was merged. This patch also has a side-effect of cleaning up an unintentional shadowed declaration inside of skd_end_request. I tested to ensure that I can still do I/O to the device using xfstests ./check -g quick. I didn't do anything more extensive than that, though. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-15Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes for the current series. This contains: - Two fixes for NVMe: One fixes a reset race that can be triggered by repeated insert/removal of the module. The other fixes an issue on some platforms, where we get probe timeouts since legacy interrupts isn't working. This used not to be a problem since we had the worker thread poll for completions, but since that was killed off, it means those poor souls can't successfully probe their NVMe device. Use a proper IRQ check and probe (msi-x -> msi ->legacy), like most other drivers to work around this. Both from Keith. - A loop corruption issue with offset in iters, from Ming Lei. - A fix for not having the partition stat per cpu ref count initialized before sending out the KOBJ_ADD, which could cause user space to access the counter prior to initialization. Also from Ming Lei. - A fix for using the wrong congestion state, from Kaixu Xia" * 'for-linus' of git://git.kernel.dk/linux-block: block: loop: fix filesystem corruption in case of aio/dio NVMe: Always use MSI/MSI-x interrupts NVMe: Fix reset/remove race writeback: fix the wrong congested state variable definition block: partition: initialize percpuref before sending out KOBJ_ADD
2016-04-15block: loop: fix filesystem corruption in case of aio/dioMing Lei
Starting from commit e36f620428(block: split bios to max possible length), block core starts to split bio in the middle of bvec. Unfortunately loop dio/aio doesn't consider this situation, and always treat 'iter.iov_offset' as zero. Then filesystem corruption is observed. This patch figures out the offset of the base bvevc via 'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset to iov iterator. Fixes: e36f6204288088f (block: split bios to max possible length) Cc: Keith Busch <keith.busch@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org (4.5) Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-13block: kill off q->flush_flagsJens Axboe
Now that we converted everything to the newer block write cache interface, kill off the queue flush_flags and queueable flush entries. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12xen-blkfront: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12virtio_blk: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12ps3disk: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12skd_main: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12osdblk: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12nbd: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12mtip32xx: remove call to blk_queue_flush()Jens Axboe
The driver calls it with 0 for flags, since it doesn't have a writeback cache. Just remove the call, as it's a no-op right now. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12loop: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12drbd: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12mtip32xx: Convert to use blk_mq_tagset_busy_iterKeith Busch
Only a single tags array anyway. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12block: add offset in blk_add_request_payload()Ming Lin
We could kmalloc() the payload, so need the offset in page. Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fix from Sage Weil: "This just fixes a few remaining memory allocations in RBD to use GFP_NOIO instead of GFP_ATOMIC" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use GFP_NOIO consistently for request allocations
2016-04-05rbd: use GFP_NOIO consistently for request allocationsDavid Disseldorp
As of 5a60e87603c4c533492c515b7f62578189b03c9c, RBD object request allocations are made via rbd_obj_request_create() with GFP_NOIO. However, subsequent OSD request allocations in rbd_osd_req_create*() use GFP_ATOMIC. With heavy page cache usage (e.g. OSDs running on same host as krbd client), rbd_osd_req_create() order-1 GFP_ATOMIC allocations have been observed to fail, where direct reclaim would have allowed GFP_NOIO allocations to succeed. Cc: stable@vger.kernel.org # 3.18+ Suggested-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Neil Brown <neilb@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "There is quite a bit here, including some overdue refactoring and cleanup on the mon_client and osd_client code from Ilya, scattered writeback support for CephFS and a pile of bug fixes from Zheng, and a few random cleanups and fixes from others" [ I already decided not to pull this because of it having been rebased recently, but ended up changing my mind after all. Next time I'll really hold people to it. Oh well. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits) libceph: use KMEM_CACHE macro ceph: use kmem_cache_zalloc rbd: use KMEM_CACHE macro ceph: use lookup request to revalidate dentry ceph: kill ceph_get_dentry_parent_inode() ceph: fix security xattr deadlock ceph: don't request vxattrs from MDS ceph: fix mounting same fs multiple times ceph: remove unnecessary NULL check ceph: avoid updating directory inode's i_size accidentally ceph: fix race during filling readdir cache libceph: use sizeof_footer() more ceph: kill ceph_empty_snapc ceph: fix a wrong comparison ceph: replace CURRENT_TIME by current_fs_time() ceph: scattered page writeback libceph: add helper that duplicates last extent operation libceph: enable large, variable-sized OSD requests libceph: osdc->req_mempool should be backed by a slab pool libceph: make r_request msg_size calculation clearer ...
2016-03-25rbd: use KMEM_CACHE macroGeliang Tang
Use KMEM_CACHE() instead of kmem_cache_create() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: enable large, variable-sized OSD requestsIlya Dryomov
Turn r_ops into a flexible array member to enable large, consisting of up to 16 ops, OSD requests. The use case is scattered writeback in cephfs and, as far as the kernel client is concerned, 16 is just a made up number. r_ops had size 3 for copyup+hint+write, but copyup is really a special case - it can only happen once. ceph_osd_request_cache is therefore stuffed with num_ops=2 requests, anything bigger than that is allocated with kmalloc(). req_mempool is backed by ceph_osd_request_cache, which means either num_ops=1 or num_ops=2 for use_mempool=true - all existing users (ceph_writepages_start(), ceph_osdc_writepages()) are fine with that. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25libceph: move r_reply_op_{len,result} into struct ceph_osd_req_opYan, Zheng
This avoids defining large array of r_reply_op_{len,result} in in struct ceph_osd_request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-24Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Final round of fixes for this merge window - some of this has come up after the initial pull request, and some of it was put in a post-merge branch before the merge window. This contains: - Fix for a bad check for an error on dma mapping in the mtip32xx driver, from Alexey Khoroshilov. - A set of fixes for lightnvm, from Javier, Matias, and Wenwei. - An NVMe completion record corruption fix from Marta, ensuring that we read things in the right order. - Two writeback fixes from Tejun, marked for stable@ as well. - A blk-mq sw queue iterator fix from Thomas, fixing an oops for sparse CPU maps. They hit this in the hot plug/unplug rework" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: avoid cqe corruption when update at the same time as read writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list() blk-mq: Use proper cpumask iterator mtip32xx: fix checks for dma mapping errors lightnvm: do not load L2P table if not supported lightnvm: do not reserve lun on l2p loading nvme: lightnvm: return ppa completion status lightnvm: add a bitmap of luns lightnvm: specify target's logical address area null_blk: add lightnvm null_blk device to the nullb_list
2016-03-20Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost updates from Michael Tsirkin: "New features, performance improvements, cleanups: - basic polling support for vhost - rework virtio to optionally use DMA API, fixing it on Xen - balloon stats gained a new entry - using the new napi_alloc_skb speeds up virtio net - virtio blk stats can now be read while another VCPU is busy inflating or deflating the balloon plus misc cleanups in various places" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_net: replace netdev_alloc_skb_ip_align() with napi_alloc_skb() vhost_net: basic polling support vhost: introduce vhost_vq_avail_empty() vhost: introduce vhost_has_work() virtio_balloon: Allow to resize and update the balloon stats in parallel virtio_balloon: Use a workqueue instead of "vballoon" kthread virtio/s390: size of SET_IND payload virtio/s390: use dev_to_virtio vhost: rename vhost_init_used() vhost: rename cross-endian helpers virtio_blk: VIRTIO_BLK_F_WCE->VIRTIO_BLK_F_FLUSH vring: Use the DMA API on Xen virtio_pci: Use the DMA API if enabled virtio_mmio: Use the DMA API if enabled virtio: Add improved queue allocation API virtio_ring: Support DMA APIs vring: Introduce vring_use_dma_api() s390/dma: Allow per device dma ops alpha/dma: use common noop dma ops dma: Provide simple noop dma ops
2016-03-18Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - a couple of hotfixes - the rest of MM - a new timer slack control in procfs - a couple of procfs fixes - a few misc things - some printk tweaks - lib/ updates, notably to radix-tree. - add my and Nick Piggin's old userspace radix-tree test harness to tools/testing/radix-tree/. Matthew said it was a godsend during the radix-tree work he did. - a few code-size improvements, switching to __always_inline where gcc screwed up. - partially implement character sets in sscanf * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) sscanf: implement basic character sets lib/bug.c: use common WARN helper param: convert some "on"/"off" users to strtobool lib: add "on"/"off" support to kstrtobool lib: update single-char callers of strtobool() lib: move strtobool() to kstrtobool() include/linux/unaligned: force inlining of byteswap operations include/uapi/linux/byteorder, swab: force inlining of some byteswap operations include/asm-generic/atomic-long.h: force inlining of some atomic_long operations usb: common: convert to use match_string() helper ide: hpt366: convert to use match_string() helper ata: hpt366: convert to use match_string() helper power: ab8500: convert to use match_string() helper power: charger_manager: convert to use match_string() helper drm/edid: convert to use match_string() helper pinctrl: convert to use match_string() helper device property: convert to use match_string() helper lib/string: introduce match_string() helper radix-tree tests: add test for radix_tree_iter_next radix-tree tests: add regression3 test ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 17:50:17 +0000