summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-10Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-08xen-blkfront: fix missing out labelJens Axboe
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07drbd: revert "delay probes", feature is being re-implemented differentlyLars Ellenberg
It was a now abandoned attempt to throttle resync bandwidth based on the delay it causes on the bulk data socket. It has no userbase yet, and has been disabled by 9173465ccb51c09cc3102a10af93e9f469a0af6f already. This removes the now unused code. The basic feature, namely using up "idle" bandwith of network and disk IO subsystem, with minimal impact to application IO, is being reimplemented differently. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07drbd: Initialize all members of sync_conf to their defaults [Bugz 315]Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07drbd: Disable delay probes for the upcomming releasePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cpqarray: check put_user() resultKulikov Vasiliy
put_user() may fail, if so return -EFAULT. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07xen/blkfront: Use QUEUE_ORDERED_DRAIN for old backendsJeremy Fitzhardinge
If there's no feature-barrier key in xenstore, then it means its a fairly old backend which does uncached in-order writes, which means ORDERED_DRAIN is appropriate. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07xen/blkfront: use tagged queuing for barriersJeremy Fitzhardinge
When barriers are supported, then use QUEUE_ORDERED_TAG to tell the block subsystem that it doesn't need to do anything else with the barriers. Previously we used ORDERED_DRAIN which caused the block subsystem to drain all pending IO before submitting the barrier, which would be very expensive. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07floppy: make controller constStephen Hemminger
The struct cont_t is just a set of virtual function pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07drivers/block: use memdup_userJulia Lawall
Use memdup_user when user data is immediately copied into the allocated region. Some checkpatch cleanups in nearby code. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Chirag Kantharia <chirag.kantharia@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: cleanup interrupt_not_for_usStephen M. Cameron
cciss: cleanup interrupt_not_for_us In the case of MSI/MSIX interrutps, we don't need to check if the interrupt is for us, and in the case of the intx interrupt handler, when checking if the interrupt is for us, we don't need to check if we're using MSI/MSIX, we know we're not. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: change printks to dev_warn, etc.Stephen M. Cameron
cciss: change printks to dev_warn, etc. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: separate cmd_alloc() and cmd_special_alloc()Stephen M. Cameron
cciss: separate cmd_alloc() and cmd_special_alloc() cmd_alloc() took a parameter which caused it to either allocate from a pre-allocated pool, or allocate using pci_alloc_consistent. This parameter is always known at compile time, so this would be better handled by breaking the function into two functions and differentiating the cases by function names. Same goes for cmd_free(). Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: use consistent variable namesStephen M. Cameron
cciss: use consistent variable names "h", for the hba structure and "c" for the command structures. and get rid of trivial CCISS_LOCK macro. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: forbid hard reset of 640x boardsStephen M. Cameron
cciss: forbid hard reset of 640x boards The 6402/6404 are two PCI devices -- two Smart Array controllers -- that fit into one slot. It is possible to reset them independently, however, they share a battery backed cache module. One of the pair controls the cache and the 2nd one access the cache through the first one. If you reset the one controlling the cache, the other one will not be a happy camper. So we just forbid resetting this conjoined mess. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: sanitize max commandsStephen M. Cameron
cciss: sanitize max commands Some controllers might try to tell us they support 0 commands in performant mode. This is a lie told by buggy firmware. We have to be wary of this lest we try to allocate a negative number of command blocks, which will be treated as unsigned, and get an out of memory condition. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: fix hard reset code.Stephen M. Cameron
cciss: Fix hard reset code. Smart Array controllers newer than the P600 do not honor the PCI power state method of resetting the controllers. Instead, in these cases we can get them to reset via the "doorbell" register. This escaped notice until we began using "performant" mode because the fact that the controllers did not reset did not normally impede subsequent operation, and so things generally appeared to "work". Once the performant mode code was added, if the controller does not reset, it remains in performant mode. The code immediately after the reset presumes the controller is in "simple" mode (which previously, it had remained in simple mode the whole time). If the controller remains in performant mode any code which presumes it is in simple mode will not work. So the reset needs to be fixed. Unfortunately there are some controllers which cannot be reset by either method. (eg. p800). We detect these cases by noticing that the controller seems to remain in performant mode even after a reset has been attempted. In those cases we ignore the controller, as any commands outstanding on it will result in stale completions. To sum up, we try to do a better job of resetting the controller if "reset_devices" is set, and if it doesn't work, we ignore that controller. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_reset_devices()Stephen M. Cameron
cciss: factor out cciss_reset_devices() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_find_cfg_addrs.Stephen M. Cameron
Rationale for this is that I will also need to use this code in fixing kdump host reset code prior to having the hba structure. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_enter_performant_modeStephen M. Cameron
cciss: factor out cciss_enter_performant_mode Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_wait_for_mode_change_ack()Stephen M. Cameron
cciss: factor out cciss_wait_for_mode_change_ack() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: make cciss_put_controller_into_performant_mode as __devinitStephen M. Cameron
cciss: make cciss_put_controller_into_performant_mode as __devinit Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: cleanup some debug ifdefsStephen M. Cameron
cciss: cleanup some debug ifdefs Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_p600_dma_prefetch_quirk()Stephen M. Cameron
cciss: factor out cciss_p600_dma_prefetch_quirk() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_enable_scsi_prefetch()Stephen M. Cameron
cciss: factor out cciss_enable_scsi_prefetch() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out CISS_signature_present()Stephen M. Cameron
cciss: factor out CISS_signature_present() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_find_board_paramsStephen M. Cameron
cciss: factor out cciss_find_board_params Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: fix leak of ioremapped memoryStephen M. Cameron
cciss: fix leak of ioremapped memory in cciss_pci_init error path. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_find_cfgtablesStephen M. Cameron
cciss: factor out cciss_find_cfgtables Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_wait_for_board_ready()Stephen M. Cameron
cciss: factor out cciss_wait_for_board_ready() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_find_memory_BAR()Stephen M. Cameron
cciss: factor out cciss_find_memory_BAR() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: remove board_id parameter from cciss_interrupt_mode()Stephen M. Cameron
cciss: remove board_id parameter from cciss_interrupt_mode() Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_board_disabledStephen M. Cameron
cciss: factor out cciss_board_disabled Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: factor out cciss_lookup_board_idStephen M. Cameron
cciss: factor out cciss_lookup_board_id Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: save pdev pointer in per hba structure early to avoid passing it ↵Stephen M. Cameron
around so much. cciss: save pdev pointer in per hba structure early to avoid passing it around so much. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07cciss: Set the performant mode bit in the scsi half of the driverStephen M. Cameron
cciss: Set the performant mode bit in the scsi half of the driver In a couple of places, the performant mode bit wasn't being set in the scsi half of the driver, causing commands to seem to hang. Use enqueue_cmd_and_start_io() where appropriate. This fixes a bug that echo engage scsi > /proc/driver/cciss/cciss0 would hang. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07blkfront: Klog the unclean release pathDaniel Stodden
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07blkfront: Remove obsolete info->usersDaniel Stodden
This is just bd_openers, protected by the bd_mutex. Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07blkfront: Remove obsolete info->usersDaniel Stodden
This is just bd_openers, protected by the bd_mutex. Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07blkfront: Lock blockfront_info during xbdev removalDaniel Stodden
Same approach as blkfront_closing: * Grab the bdev safely, holding the info mutex. * Zap xbdev safely, holding the info mutex. * Try bdev removal safely, holding bd_mutex. Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07blkfront: Fix blkfront backend switch race (bdev release)Daniel Stodden
We cannot read backend state within bdev operations, because it risks grabbing the state change before xenbus gets to do it. Fixed by tracking deferral with a frontend switch to Closing. State exposure isn't strictly necessary, but the backends won't mind. For a 'clean' deferral this seems actually a more decent protocol than raising errors. Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07blkfront: Fix blkfront backend switch race (bdev open)Daniel Stodden
We need not mind if users grab a late handle on a closing disk. We probably even should not. But we have to make sure it's not a dead one already Let the bdev deal with a gendisk deleted under its feet. Takes the info mutex to decide a race against backend closing. Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07blkfront: Lock blkfront_info when closingDaniel Stodden
The bdev .open/.release fops race against backend switches to Closing, handled by the XenBus thread. The original code attempted to serialize block device holders and xenbus only via bd_mutex. This is insufficient, the info->bd pointer may already be stale (or null) while xenbus tries to bump up the refcount. Protect blkfront_info with a dedicated mutex. Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07blkfront: Clean up vbd releaseDaniel Stodden
* Current blkfront_closing is rather a xlvbd_release_gendisk. Renamed in preparation of later patches (need the name again). * Removed the misleading comment -- this only applied to the backend switch handler, and the queue is already flushed btw. * Break out the xenbus call, callers know better when to switch frontend state. Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07blkfront: Fix gendisk leakDaniel Stodden
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07blkfront: Fix backtrace in del_gendiskDaniel Stodden
The call to del_gendisk follows an non-refcounted gd->queue pointer. We release the last ref in blk_cleanup_queue. Fixed by reordering releases accordingly. Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07xen/blkfront: revalidate after setting capacityK. Y. Srinivasan
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07xen/blkfront: avoid compiler warning from missing casesJeremy Fitzhardinge
Fix: drivers/block/xen-blkfront.c: In function ‘blkfront_connect’: drivers/block/xen-blkfront.c:933: warning: enumeration value ‘BLKIF_STATE_DISCONNECTED’ not handled in switch Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07xen/front: Propagate changed size of VBDsK. Y. Srinivasan
Support dynamic resizing of virtual block devices. This patch supports both file backed block devices as well as physical devices that can be dynamically resized on the host side. Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 20:21:58 +0000