summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2020-06-04zcomp: Use ARRAY_SIZE() for backends listAndy Shevchenko
Instead of keeping NULL terminated array switch to use ARRAY_SIZE() which helps to further clean up. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: http://lkml.kernel.org/r/20200508100758.51644-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-02Merge tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull DAX updates part one from Darrick Wong: "After many years of LKML-wrangling about how to enable programs to query and influence the file data access mode (DAX) when a filesystem resides on storage devices such as persistent memory, Ira Weiny has emerged with a proposed set of standard behaviors that has not been shot down by anyone! We're more or less standardizing on the current XFS behavior and adapting ext4 to do the same. This is the first of a handful pull requests that will make ext4 and XFS present a consistent interface for user programs that care about DAX. We add a statx attribute that programs can check to see if DAX is enabled on a particular file. Then, we update the DAX documentation to spell out the user-visible behaviors that filesystems will guarantee (until the next storage industry shakeup). The on-disk inode flag has been in XFS for a few years now. Summary: - Clean up io_is_direct. - Add a new statx flag to indicate when file data access is being done via DAX (as opposed to the page cache). - Update the documentation for how system administrators and application programmers can take advantage of the (still experimental DAX) feature" Link: https://lore.kernel.org/lkml/20200505002016.1085071-1-ira.weiny@intel.com/ * tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: Documentation/dax: Update Usage section fs/stat: Define DAX statx attribute fs: Remove unneeded IS_DAX() check in io_is_direct()
2020-06-02Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "On top of the core changes, here are the block driver changes for this merge window: - NVMe changes: - NVMe over Fibre Channel protocol updates, which also reach over to drivers/scsi/lpfc (James Smart) - namespace revalidation support on the target (Anthony Iliopoulos) - gcc zero length array fix (Arnd Bergmann) - nvmet cleanups (Chaitanya Kulkarni) - misc cleanups and fixes (me, Keith Busch, Sagi Grimberg) - use a SRQ per completion vector (Max Gurtovoy) - fix handling of runtime changes to the queue count (Weiping Zhang) - t10 protection information support for nvme-rdma and nvmet-rdma (Israel Rukshin and Max Gurtovoy) - target side AEN improvements (Chaitanya Kulkarni) - various fixes and minor improvements all over, icluding the nvme part of the lpfc driver" - Floppy code cleanup series (Willy, Denis) - Floppy contention fix (Jiri) - Loop CONFIGURE support (Martijn) - bcache fixes/improvements (Coly, Joe, Colin) - q->queuedata cleanups (Christoph) - Get rid of ioctl_by_bdev (Christoph, Stefan) - md/raid5 allocation fixes (Coly) - zero length array fixes (Gustavo) - swim3 task state fix (Xu)" * tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits) bcache: configure the asynchronous registertion to be experimental bcache: asynchronous devices registration bcache: fix refcount underflow in bcache_device_free() bcache: Convert pr_<level> uses to a more typical style bcache: remove redundant variables i and n lpfc: Fix return value in __lpfc_nvme_ls_abort lpfc: fix axchg pointer reference after free and double frees lpfc: Fix pointer checks and comments in LS receive refactoring nvme: set dma alignment to qword nvmet: cleanups the loop in nvmet_async_events_process nvmet: fix memory leak when removing namespaces and controllers concurrently nvmet-rdma: add metadata/T10-PI support nvmet: add metadata support for block devices nvmet: add metadata/T10-PI support nvme: add Metadata Capabilities enumerations nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len nvmet: rename nvmet_rw_len to nvmet_rw_data_len nvmet: add metadata characteristics for a namespace nvme-rdma: add metadata/T10-PI support nvme-rdma: introduce nvme_rdma_sgl structure ...
2020-06-02Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
2020-06-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: "A few little subsystems and a start of a lot of MM patches. Subsystems affected by this patch series: squashfs, ocfs2, parisc, vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup, swap, memcg, pagemap, memory-failure, vmalloc, kasan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) kasan: move kasan_report() into report.c mm/mm_init.c: report kasan-tag information stored in page->flags ubsan: entirely disable alignment checks under UBSAN_TRAP kasan: fix clang compilation warning due to stack protector x86/mm: remove vmalloc faulting mm: remove vmalloc_sync_(un)mappings() x86/mm/32: implement arch_sync_kernel_mappings() x86/mm/64: implement arch_sync_kernel_mappings() mm/ioremap: track which page-table levels were modified mm/vmalloc: track which page-table levels were modified mm: add functions to track page directory modifications s390: use __vmalloc_node in stack_alloc powerpc: use __vmalloc_node in alloc_vm_stack arm64: use __vmalloc_node in arch_alloc_vmap_stack mm: remove vmalloc_user_node_flags mm: switch the test_vmalloc module to use __vmalloc_node mm: remove __vmalloc_node_flags_caller mm: remove both instances of __vmalloc_node_flags mm: remove the prot argument to __vmalloc_node mm: remove the pgprot argument to __vmalloc ...
2020-06-02mm: remove the pgprot argument to __vmallocChristoph Hellwig
The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [hyperv] Acked-by: Gao Xiang <xiang@kernel.org> [erofs] Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Wei Liu <wei.liu@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02mm/writeback: replace PF_LESS_THROTTLE with PF_LOCAL_THROTTLENeilBrown
PF_LESS_THROTTLE exists for loop-back nfsd (and a similar need in the loop block driver and callers of prctl(PR_SET_IO_FLUSHER)), where a daemon needs to write to one bdi (the final bdi) in order to free up writes queued to another bdi (the client bdi). The daemon sets PF_LESS_THROTTLE and gets a larger allowance of dirty pages, so that it can still dirty pages after other processses have been throttled. The purpose of this is to avoid deadlock that happen when the PF_LESS_THROTTLE process must write for any dirty pages to be freed, but it is being thottled and cannot write. This approach was designed when all threads were blocked equally, independently on which device they were writing to, or how fast it was. Since that time the writeback algorithm has changed substantially with different threads getting different allowances based on non-trivial heuristics. This means the simple "add 25%" heuristic is no longer reliable. The important issue is not that the daemon needs a *larger* dirty page allowance, but that it needs a *private* dirty page allowance, so that dirty pages for the "client" bdi that it is helping to clear (the bdi for an NFS filesystem or loop block device etc) do not affect the throttling of the daemon writing to the "final" bdi. This patch changes the heuristic so that the task is not throttled when the bdi it is writing to has a dirty page count below below (or equal to) the free-run threshold for that bdi. This ensures it will always be able to have some pages in flight, and so will not deadlock. In a steady-state, it is expected that PF_LOCAL_THROTTLE tasks might still be throttled by global threshold, but that is acceptable as it is only the deadlock state that is interesting for this flag. This approach of "only throttle when target bdi is busy" is consistent with the other use of PF_LESS_THROTTLE in current_may_throttle(), were it causes attention to be focussed only on the target bdi. So this patch - renames PF_LESS_THROTTLE to PF_LOCAL_THROTTLE, - removes the 25% bonus that that flag gives, and - If PF_LOCAL_THROTTLE is set, don't delay at all unless the global and the local free-run thresholds are exceeded. Note that previously realtime threads were treated the same as PF_LESS_THROTTLE threads. This patch does *not* change the behvaiour for real-time threads, so it is now different from the behaviour of nfsd and loop tasks. I don't know what is wanted for realtime. [akpm@linux-foundation.org: coding style fixes] Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Chuck Lever <chuck.lever@oracle.com> [nfsd] Cc: Christoph Hellwig <hch@lst.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Link: http://lkml.kernel.org/r/87ftbf7gs3.fsf@notabene.neil.brown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-29null_blk: force complete for timeout requestDongli Zhang
The commit 7b11eab041da ("blk-mq: blk-mq: provide forced completion method") exports new API to force a request to complete without error injection. There should be no error injection when completing a request by timeout handler. Otherwise, the below would hang because timeout handler is failed. echo 100 > /sys/kernel/debug/fail_io_timeout/probability echo 1000 > /sys/kernel/debug/fail_io_timeout/times echo 1 > /sys/block/nullb0/io-timeout-fail dd if=/dev/zero of=/dev/nullb0 bs=512 count=1 oflag=direct With this patch, the timeout handler is able to complete the IO. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: drain I/O when all CPUs in a hctx are offlineMing Lei
Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup up queue mapping. Thomas mentioned the following point[1]: "That was the constraint of managed interrupts from the very beginning: The driver/subsystem has to quiesce the interrupt line and the associated queue _before_ it gets shutdown in CPU unplug and not fiddle with it until it's restarted by the core when the CPU is plugged in again." However, current blk-mq implementation doesn't quiesce hw queue before the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is a cpuhp state handled after the CPU is down, so there isn't any chance to quiesce the hctx before shutting down the CPU. Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs where the last CPU goes away, and wait for completion of in-flight requests. This guarantees that there is no inflight I/O before shutting down the managed IRQ. Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need to wait for completion of in-flight requests from these drivers to avoid a potential dead-lock. It is safe to do this for stacking drivers as those do not use interrupts at all and their I/O completions are triggered by underlying devices I/O completion. [1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/ [hch: different retry mechanism, merged two patches, minor cleanups] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-28tcp: add tcp_sock_set_quickackChristoph Hellwig
Add a helper to directly set the TCP_QUICKACK sockopt from kernel space without going through a fake uaccess. Cleanup the callers to avoid pointless wrappers now that this is a simple function call. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: add tcp_sock_set_nodelayChristoph Hellwig
Add a helper to directly set the TCP_NODELAY sockopt from kernel space without going through a fake uaccess. Cleanup the callers to avoid pointless wrappers now that this is a simple function call. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28tcp: add tcp_sock_set_corkChristoph Hellwig
Add a helper to directly set the TCP_CORK sockopt from kernel space without going through a fake uaccess. Cleanup the callers to avoid pointless wrappers now that this is a simple function call. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28zram: Use local lock to protect per-CPU dataMike Galbraith
The zcomp driver uses per-CPU compression. The per-CPU data pointer is acquired with get_cpu_ptr() which implicitly disables preemption. It allocates memory inside the preempt disabled region which conflicts with the PREEMPT_RT semantics. Replace the implicit preemption control with an explicit local lock. This allows RT kernels to substitute it with a real per CPU lock, which serializes the access but keeps the code section preemptible. On non RT kernels this maps to preempt_disable() as before, i.e. no functional change. [bigeasy: Use local_lock(), description, drop reordering] Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-8-bigeasy@linutronix.de
2020-05-28zram: Allocate struct zcomp_strm as per-CPU memorySebastian Andrzej Siewior
zcomp::stream is a per-CPU pointer, pointing to struct zcomp_strm which contains two pointers. Having struct zcomp_strm allocated directly as per-CPU memory would avoid one additional memory allocation and a pointer dereference. This also simplifies the addition of a local_lock to struct zcomp_strm. Allocate zcomp::stream directly as per-CPU memory. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200527201119.1692513-7-bigeasy@linutronix.de
2020-05-27zram: nvdimm: use bio_{start,end}_io_acct and disk_{start,end}_io_acctChristoph Hellwig
Switch zram to use the nicer bio accounting helpers, and as part of that ensure each bio is counted as a single I/O request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27rsxx: use bio_{start,end}_io_acctChristoph Hellwig
Switch rsxx to use the nicer bio accounting helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27drbd: use bio_{start,end}_io_acctChristoph Hellwig
Switch drbd to use the nicer bio accounting helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-26block/floppy: fix contended case in floppy_queue_rq()Jiri Kosina
Since the switch of floppy driver to blk-mq, the contended (fdc_busy) case in floppy_queue_rq() is not handled correctly. In case we reach floppy_queue_rq() with fdc_busy set (i.e. with the floppy locked due to another request still being in-flight), we put the request on the list of requests and return BLK_STS_OK to the block core, without actually scheduling delayed work / doing further processing of the request. This means that processing of this request is postponed until another request comes and passess uncontended. Which in some cases might actually never happen and we keep waiting indefinitely. The simple testcase is for i in `seq 1 2000`; do echo -en $i '\r'; blkid --info /dev/fd0 2> /dev/null; done run in quemu. That reliably causes blkid eventually indefinitely hanging in __floppy_read_block_0() waiting for completion, as the BIO callback never happens, and no further IO is ever submitted on the (non-existent) floppy device. This was observed reliably on qemu-emulated device. Fix that by not queuing the request in the contended case, and return BLK_STS_RESOURCE instead, so that blk core handles the request rescheduling and let it pass properly non-contended later. Fixes: a9f38e1dec107a ("floppy: convert to blk-mq") Cc: stable@vger.kernel.org Tested-by: Libor Pechacek <lpechacek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-24loop: remove redundant assignment to variable errorColin Ian King
The variable error is being assigned a value that is never read so the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-22Merge tag 'block-5.7-2020-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Two fixes for null_blk zone mode" * tag 'block-5.7-2020-05-22' of git://git.kernel.dk/linux-block: null_blk: don't allow discard for zoned mode null_blk: return error for invalid zone size
2020-05-21null_blk: don't allow discard for zoned modeChaitanya Kulkarni
Zoned block device specification do not define the behavior of discard/trim command as this command is generally replaced by the reset write pointer (zone reset) command. Emulate this in null_blk by making zoned and discard options mutually exclusive. Suggested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21null_blk: return error for invalid zone sizeChaitanya Kulkarni
In null_init_zone_dev() check if the zone size is larger than device capacity, return error if needed. This also fixes the following oops :- null_blk: changed the number of conventional zones to 4294967295 BUG: kernel NULL pointer dereference, address: 0000000000000010 PGD 7d76c5067 P4D 7d76c5067 PUD 7d240c067 PMD 0 Oops: 0002 [#1] SMP NOPTI CPU: 4 PID: 5508 Comm: nullbtests.sh Tainted: G OE 5.7.0-rc4lblk-fnext0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e4 RIP: 0010:null_init_zoned_dev+0x17a/0x27f [null_blk] RSP: 0018:ffffc90007007e00 EFLAGS: 00010246 RAX: 0000000000000020 RBX: ffff8887fb3f3c00 RCX: 0000000000000007 RDX: 0000000000000000 RSI: ffff8887ca09d688 RDI: ffff888810fea510 RBP: 0000000000000010 R08: ffff8887ca09d688 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8887c26e8000 R13: ffffffffa05e9390 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fcb5256f740(0000) GS:ffff888810e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000081e8fe000 CR4: 00000000003406e0 Call Trace: null_add_dev+0x534/0x71b [null_blk] nullb_device_power_store.cold.41+0x8/0x2e [null_blk] configfs_write_file+0xe6/0x150 vfs_write+0xba/0x1e0 ksys_write+0x5f/0xe0 do_syscall_64+0x60/0x250 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fcb51c71840 Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Add LOOP_CONFIGURE ioctlMartijn Coenen
This allows userspace to completely setup a loop device with a single ioctl, removing the in-between state where the device can be partially configured - eg the loop device has a backing file associated with it, but is reading from the wrong offset. Besides removing the intermediate state, another big benefit of this ioctl is that LOOP_SET_STATUS can be slow; the main reason for this slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to freeze the associated queue; this requires waiting for RCU synchronization, which I've measured can take about 15-20ms on this device on average. In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can also be used to: - Set the correct block size immediately by setting loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE) - Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO) - Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY in loop_config.info.lo_flags Here's setting up ~70 regular loop devices with an offset on an x86 Android device, using LOOP_SET_FD and LOOP_SET_STATUS: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m03.40s real 0m00.02s user 0m00.03s system Here's configuring ~70 devices in the same way, but using a modified losetup that uses the new LOOP_CONFIGURE ioctl: vsoc_x86:/system/apex # time for i in `seq 30 100`; do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done 0m01.94s real 0m00.01s user 0m00.01s system Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Clean up LOOP_SET_STATUS lo_flags handlingMartijn Coenen
LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this explicit by updating the UAPI to include the flags that can be set/cleared using this ioctl. The implementation can then blindly take over the passed in flags, and use the previous flags for those flags that can't be set / cleared using LOOP_SET_STATUS. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Rework lo_ioctl() __user argument castingMartijn Coenen
In preparation for a new ioctl that needs to copy_from_user(); makes the code easier to read as well. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Move loop_set_status_from_info() and friends upMartijn Coenen
So we can use it without forward declaration. This is a separate commit to make it easier to verify that this is just a move, without functional modifications. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Factor out configuring loop from statusMartijn Coenen
Factor out this code into a separate function, so it can be reused by other code more easily. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Remove figure_loop_size()Martijn Coenen
This function was now only used by loop_set_capacity(). Just open code the remaining code in the caller instead. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Refactor loop_set_status() size calculationMartijn Coenen
figure_loop_size() calculates the loop size based on the passed in parameters, but at the same time it updates the offset and sizelimit parameters in the loop device configuration. That is a somewhat unexpected side effect of a function with this name, and it is only only needed by one of the two callers of this function - loop_set_status(). Move the lo_offset and lo_sizelimit assignment back into loop_set_status(), and use the newly factored out functions to validate and apply the newly calculated size. This allows us to get rid of figure_loop_size() in a follow-up commit. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Switch to set_capacity_revalidate_and_notify()Martijn Coenen
This was recently added to block/genhd.c, and takes care of both updating the capacity and notifying userspace of the new size. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Factor out setting loop device sizeMartijn Coenen
This code is used repeatedly. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Remove sector_t truncation checksMartijn Coenen
sector_t is now always u64, so we don't need to check for truncation. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-21loop: Call loop_config_discard() only after new config is appliedMartijn Coenen
loop_set_status() calls loop_config_discard() to configure discard for the loop device; however, the discard configuration depends on whether the loop device uses encryption, and when we call it the encryption configuration has not been updated yet. Move the call down so we apply the correct discard configuration based on the new configuration. Signed-off-by: Martijn Coenen <maco@android.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19null_blk: Zero-initialize read buffers in non-memory-backed modeBart Van Assche
This patch suppresses an uninteresting KMSAN complaint without affecting performance of the null_blk driver if CONFIG_KMSAN is disabled. Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Alexander Potapenko <glider@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-16block/swim3: use set_current_state macroXu Wang
Use set_current_state macro instead of current->state = TASK_RUNNING. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12null_blk: Support REQ_OP_ZONE_APPENDDamien Le Moal
Support REQ_OP_ZONE_APPEND requests for null_blk devices with zoned mode enabled. Use the internally tracked zone write pointer position as the actual write position and return it using the command request __sector field in the case of an mq device and using the command BIO sector in the case of a BIO device. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12block: Modify revalidate zonesDamien Le Moal
Modify the interface of blk_revalidate_disk_zones() to add an optional driver callback function that a driver can use to extend processing done during zone revalidation. The callback, if defined, is executed with the device request queue frozen, after all zones have been inspected. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-12floppy: suppress UBSAN warning in setup_rw_floppy()Denis Efremov
UBSAN: array-index-out-of-bounds in drivers/block/floppy.c:1521:45 index 16 is out of range for type 'unsigned char [16]' Call Trace: ... setup_rw_floppy+0x5c3/0x7f0 floppy_ready+0x2be/0x13b0 process_one_work+0x2c1/0x5d0 worker_thread+0x56/0x5e0 kthread+0x122/0x170 ret_from_fork+0x35/0x40 From include/uapi/linux/fd.h: struct floppy_raw_cmd { ... unsigned char cmd_count; unsigned char cmd[16]; unsigned char reply_count; unsigned char reply[16]; ... } This out-of-bounds access is intentional. The command in struct floppy_raw_cmd may take up the space initially intended for the reply and the reply count. It is needed for long 82078 commands such as RESTORE, which takes 17 command bytes. Initial cmd size is not enough and since struct setup_rw_floppy is a part of uapi we check that cmd_count is in [0:16+1+16] in raw_cmd_copyin(). The patch adds union with original cmd,reply_count,reply fields and fullcmd field of equivalent size. The cmd accesses are turned to fullcmd where appropriate to suppress UBSAN warning. Link: https://lore.kernel.org/r/20200501134416.72248-5-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: add defines for sizes of cmd & reply buffers of floppy_raw_cmdDenis Efremov
Use FD_RAW_CMD_SIZE, FD_RAW_REPLY_SIZE defines instead of magic numbers for cmd & reply buffers of struct floppy_raw_cmd. Remove local to floppy.c MAX_REPLIES define, as it is now FD_RAW_REPLY_SIZE. FD_RAW_CMD_FULLSIZE added as we allow command to also fill reply_count and reply fields. Link: https://lore.kernel.org/r/20200501134416.72248-4-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: add FD_AUTODETECT_SIZE define for struct floppy_drive_paramsDenis Efremov
Use FD_AUTODETECT_SIZE for autodetect buffer size in struct floppy_drive_params instead of a magic number. Link: https://lore.kernel.org/r/20200501134416.72248-3-efremov@linux.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: use print_hex_dump() in setup_DMA()Denis Efremov
Remove pr_cont() and use print_hex_dump() in setup_DMA() to print the contents of the cmd buffer. Link: https://lore.kernel.org/r/20200501134416.72248-2-efremov@linux.com Suggested-by: Joe Perches <joe@perches.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make set_fdc() always set current_drive and current_fdWilly Tarreau
When called with a negative drive value, set_fdc() would stick to the current fdc (which was assumed to reflect the current_drive's FDC). We do not need this anymore as the last call place with a negative value was just addressed. Let's make this function always set both current_fdc and current_drive so that there's no more ambiguity. A few comments stating this were added to a few non-obvious places. Link: https://lore.kernel.org/r/20200410101904.14652-3-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: get rid of current_reqD in favor of current_driveWilly Tarreau
This macro equals -1 and is used as an alternative for current_drive when calling reschedule_timeout(), which in turn needs to remap it. This only adds obfuscation, let's simply use current_drive. Link: https://lore.kernel.org/r/20200410101904.14652-2-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: make sure to reset all FDCs upon resume()Willy Tarreau
In floppy_resume() we don't properly reinitialize all FDCs, instead we reinitialize the current FDC once per available FDC because value -1 is passed to user_reset_fdc(). Let's simply save the current drive and properly reinitialize each FDC. Link: https://lore.kernel.org/r/20200410101904.14652-1-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: do not iterate on current_fdc in do_floppy_init()Willy Tarreau
There's no need to iterate on current_fdc in do_floppy_init() anymore, in the first case it's only used as an array index to access fdc_state[], so let's get rid of this confusing assignment. The second case is a bit trickier because user_reset_fdc() needs to already know current_fdc when called with drive==-1 due to this call chain: user_reset_fdc() lock_fdc() set_fdc() drive<0 ==> new_fdc = current_fdc Note that current_drive is not used in this code part and may even not match a unit belonging to current_fdc. Instead of passing -1 we can simply pass the first drive of the FDC being initialized, which is even cleaner as it will allow the function chain above to consistently assign both variables. Link: https://lore.kernel.org/r/20200410093023.14499-1-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: add a few comments about expectations in certain functionsWilly Tarreau
The locking in the driver is far from being obvious, with unlocking automatically happening at end of operations scheduled by interrupt, especially for the error paths where one does not necessarily expect that such an interrupt may be triggered. Let's add a few comments about what to expect at certain places to avoid misdetecting bugs which are not. Link: https://lore.kernel.org/r/20200331094054.24441-24-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: do not iterate on current_fdc in DMA grab/release functionsWilly Tarreau
Both floppy_grab_irq_and_dma() and floppy_release_irq_and_dma() used to iterate on the global variable while setting up or freeing resources. Now that they exclusively rely on functions which take the fdc as an argument, so let's not touch the global one anymore. Link: https://lore.kernel.org/r/20200331094054.24441-23-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make get_fdc_version() not rely on current_fdc anymoreWilly Tarreau
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Link: https://lore.kernel.org/r/20200331094054.24441-22-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
2020-05-12floppy: cleanup: make next_valid_format() not rely on current_drive anymoreWilly Tarreau
Now the drive is passed in argument so that the function does not use current_drive anymore. Link: https://lore.kernel.org/r/20200331094054.24441-21-w@1wt.eu Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 15:09:09 +0000