summaryrefslogtreecommitdiff
path: root/drivers/block/nbd.c
AgeCommit message (Collapse)Author
2021-02-22nbd: handle device refs for DESTROY_ON_DISCONNECT properlyJosef Bacik
There exists a race where we can be attempting to create a new nbd configuration while a previous configuration is going down, both configured with DESTROY_ON_DISCONNECT. Normally devices all have a reference of 1, as they won't be cleaned up until the module is torn down. However with DESTROY_ON_DISCONNECT we'll make sure that there is only 1 reference (generally) on the device for the config itself, and then once the config is dropped, the device is torn down. The race that exists looks like this TASK1 TASK2 nbd_genl_connect() idr_find() refcount_inc_not_zero(nbd) * count is 2 here ^^ nbd_config_put() nbd_put(nbd) (count is 1) setup new config check DESTROY_ON_DISCONNECT put_dev = true if (put_dev) nbd_put(nbd) * free'd here ^^ In nbd_genl_connect() we assume that the nbd ref count will be 2, however clearly that won't be true if the nbd device had been setup as DESTROY_ON_DISCONNECT with its prior configuration. Fix this by getting rid of the runtime flag to check if we need to mess with the nbd device refcount, and use the device NBD_DESTROY_ON_DISCONNECT flag to check if we need to adjust the ref counts. This was reported by syzkaller with the following kasan dump BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:71 [inline] BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] BUG: KASAN: use-after-free in refcount_dec_not_one+0x71/0x1e0 lib/refcount.c:76 Read of size 4 at addr ffff888143bf71a0 by task systemd-udevd/8451 CPU: 0 PID: 8451 Comm: systemd-udevd Not tainted 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:230 __kasan_report mm/kasan/report.c:396 [inline] kasan_report.cold+0x79/0xd5 mm/kasan/report.c:413 check_memory_region_inline mm/kasan/generic.c:179 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:185 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_dec_not_one+0x71/0x1e0 lib/refcount.c:76 refcount_dec_and_mutex_lock+0x19/0x140 lib/refcount.c:115 nbd_put drivers/block/nbd.c:248 [inline] nbd_release+0x116/0x190 drivers/block/nbd.c:1508 __blkdev_put+0x548/0x800 fs/block_dev.c:1579 blkdev_put+0x92/0x570 fs/block_dev.c:1632 blkdev_close+0x8c/0xb0 fs/block_dev.c:1640 __fput+0x283/0x920 fs/file_table.c:280 task_work_run+0xdd/0x190 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x249/0x250 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline] syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc1e92b5270 Code: 73 01 c3 48 8b 0d 38 7d 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c1 20 00 00 75 10 b8 03 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 RSP: 002b:00007ffe8beb2d18 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1e92b5270 RDX: 000000000aba9500 RSI: 0000000000000000 RDI: 0000000000000007 RBP: 00007fc1ea16f710 R08: 000000000000004a R09: 0000000000000008 R10: 0000562f8cb0b2a8 R11: 0000000000000246 R12: 0000000000000000 R13: 0000562f8cb0afd0 R14: 0000000000000003 R15: 000000000000000e Allocated by task 1: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:401 [inline] ____kasan_kmalloc.constprop.0+0x82/0xa0 mm/kasan/common.c:429 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:682 [inline] nbd_dev_add+0x44/0x8e0 drivers/block/nbd.c:1673 nbd_init+0x250/0x271 drivers/block/nbd.c:2394 do_one_initcall+0x103/0x650 init/main.c:1223 do_initcall_level init/main.c:1296 [inline] do_initcalls init/main.c:1312 [inline] do_basic_setup init/main.c:1332 [inline] kernel_init_freeable+0x605/0x689 init/main.c:1533 kernel_init+0xd/0x1b8 init/main.c:1421 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 Freed by task 8451: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38 kasan_set_track+0x1c/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:356 ____kasan_slab_free+0xe1/0x110 mm/kasan/common.c:362 kasan_slab_free include/linux/kasan.h:192 [inline] slab_free_hook mm/slub.c:1547 [inline] slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1580 slab_free mm/slub.c:3143 [inline] kfree+0xdb/0x3b0 mm/slub.c:4139 nbd_dev_remove drivers/block/nbd.c:243 [inline] nbd_put.part.0+0x180/0x1d0 drivers/block/nbd.c:251 nbd_put drivers/block/nbd.c:295 [inline] nbd_config_put+0x6dd/0x8c0 drivers/block/nbd.c:1242 nbd_release+0x103/0x190 drivers/block/nbd.c:1507 __blkdev_put+0x548/0x800 fs/block_dev.c:1579 blkdev_put+0x92/0x570 fs/block_dev.c:1632 blkdev_close+0x8c/0xb0 fs/block_dev.c:1640 __fput+0x283/0x920 fs/file_table.c:280 task_work_run+0xdd/0x190 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x249/0x250 kernel/entry/common.c:201 __syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline] syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888143bf7000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 416 bytes inside of 1024-byte region [ffff888143bf7000, ffff888143bf7400) The buggy address belongs to the page: page:000000005238f4ce refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x143bf0 head:000000005238f4ce order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head) raw: 057ff00000010200 ffffea00004b1400 0000000300000003 ffff888010c41140 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888143bf7080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888143bf7100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888143bf7180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888143bf7200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Reported-and-tested-by: syzbot+429d3f82d757c211bff3@syzkaller.appspotmail.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-21Merge tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: - Remove the skd driver. It's been EOL for a long time (Damien) - NVMe pull requests - fix multipath handling of ->queue_rq errors (Chao Leng) - nvmet cleanups (Chaitanya Kulkarni) - add a quirk for buggy Amazon controller (Filippo Sironi) - avoid devm allocations in nvme-hwmon that don't interact well with fabrics (Hannes Reinecke) - sysfs cleanups (Jiapeng Chong) - fix nr_zones for multipath (Keith Busch) - nvme-tcp crash fix for no-data commands (Sagi Grimberg) - nvmet-tcp fixes (Sagi Grimberg) - add a missing __rcu annotation (Christoph) - failed reconnect fixes (Chao Leng) - various tracing improvements (Michal Krakowiak, Johannes Thumshirn) - switch the nvmet-fc assoc_list to use RCU protection (Leonid Ravich) - resync the status codes with the latest spec (Max Gurtovoy) - minor nvme-tcp improvements (Sagi Grimberg) - various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya Kulkarni, Israel Rukshin) - Floppy O_NDELAY fix (Denis) - MD pull request - raid5 chunk_sectors fix (Guoqing) - Use lore links (Kees) - Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao) - loop lock scaling (Pavel) - mtip32xx PCI fixes (Bjorn) - bcache fixes (Kai, Dongdong) - Misc fixes (Tian, Yang, Guoqing, Joe, Andy) * tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits) lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid() lightnvm: fix unnecessary NULL check warnings nvme-tcp: fix crash triggered with a dataless request submission block: Replace lkml.org links with lore nbd: Convert to DEFINE_SHOW_ATTRIBUTE nvme: add 48-bit DMA address quirk for Amazon NVMe controllers nvme-hwmon: rework to avoid devm allocation nvmet: remove else at the end of the function nvmet: add nvmet_req_subsys() helper nvmet: use min of device_path and disk len nvmet: use invalid cmd opcode helper nvmet: use invalid cmd opcode helper nvmet: add helper to report invalid opcode nvmet: remove extra variable in id-ns handler nvmet: make nvmet_find_namespace() req based nvmet: return uniform error for invalid ns nvmet: set status to 0 in case for invalid nsid nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues nvme-multipath: set nr_zones for zoned namespaces nvmet-tcp: fix potential race of tcp socket closing accept_work ...
2021-02-10nbd: Convert to DEFINE_SHOW_ATTRIBUTELiao Pingfang
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Liao Pingfang <winndows@163.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25nbd: freeze the queue while we're adding connectionsJosef Bacik
When setting up a device, we can krealloc the config->socks array to add new sockets to the configuration. However if we happen to get a IO request in at this point even though we aren't setup we could hit a UAF, as we deref config->socks without any locking, assuming that the configuration was setup already and that ->socks is safe to access it as we have a reference on the configuration. But there's nothing really preventing IO from occurring at this point of the device setup, we don't want to incur the overhead of a lock to access ->socks when it will never change while the device is running. To fix this UAF scenario simply freeze the queue if we are adding sockets. This will protect us from this particular case without adding any additional overhead for the normal running case. Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17nbd: Respect max_part for all partition scansJosh Triplett
The creation path of the NBD device respects max_part and only scans for partitions if max_part is not 0. However, some other code paths ignore max_part, and unconditionally scan for partitions. Add a check for max_part on each partition scan. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: stop using bdget_disk for partition 0Christoph Hellwig
We can just dereference the point in struct gendisk instead. Also remove the now unused export. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: remove the nr_sects field in struct hd_structChristoph Hellwig
Now that the hd_struct always has a block device attached to it, there is no need for having two size field that just get out of sync. Additionally the field in hd_struct did not use proper serialization, possibly allowing for torn writes. By only using the block_device field this problem also gets fixed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16nbd: use set_capacity_and_notifyChristoph Hellwig
Use set_capacity_and_notify to update the disk and block device sizes and send a RESIZE uevent to userspace. Note that blktests relies on uevents being sent also for updates that did not change the device size, so the explicit kobject_uevent remains for that case. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16nbd: validate the block size in nbd_set_sizeChristoph Hellwig
Move the validation of the block from the callers into nbd_set_size. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16nbd: refactor size updatesChristoph Hellwig
Merge nbd_size_set and nbd_size_update into a single function that also updates the nbd_config fields. This new function takes the device size in bytes as the first argument, and the blocksize as the second argument, simplifying the calculations required in most callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16nbd: move the task_recv check into nbd_size_updateChristoph Hellwig
nbd_size_update is about to acquire a few more callers, so lift the check into the function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16nbd: remove the call to set_blocksizeChristoph Hellwig
Block driver have no business setting the file system concept of a block size. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-10nbd: fix a block_device refcount leak in nbd_releaseChristoph Hellwig
bdget_disk needs to be paired with bdput to not leak a reference on the block device inode. Fixes: 08ba91ee6e2c ("nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-29nbd: don't update block size after device is startedMing Lei
Mounted NBD device can be resized, one use case is rbd-nbd. Fix the issue by setting up default block size, then not touch it in nbd_size_update() any more. This kind of usage is aligned with loop which has same use case too. Cc: stable@vger.kernel.org Fixes: c8a83a6b54d0 ("nbd: Use set_blocksize() to set device blocksize") Reported-by: lining <lining2020x@163.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Jan Kara <jack@suse.cz> Tested-by: lining <lining2020x@163.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-24Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including <linux/version.h> sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ...
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-14nbd: make the config put is called before the notifying the waiterXiubo Li
There has one race case for ceph's rbd-nbd tool. When do mapping it may fail with EBUSY from ioctl(nbd, NBD_DO_IT), but actually the nbd device has already unmaped. It dues to if just after the wake_up(), the recv_work() is scheduled out and defers calling the nbd_config_put(), though the map process has exited the "nbd->recv_task" is not cleared. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-02genetlink: move to smaller ops wherever possibleJakub Kicinski
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23block: move the NEED_PART_SCAN flag to struct gendiskChristoph Hellwig
We can only scan for partitions on the whole disk, so move the flag from struct block_device to struct gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02block: rename bd_invalidatedChristoph Hellwig
Replace bd_invalidate with a new BDEV_NEED_PART_SCAN flag in a bd_flags variable to better describe the condition. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01block: replace bd_set_size with bd_set_nr_sectorsChristoph Hellwig
Replace bd_set_size with a version that takes the number of sectors instead, as that fits most of the current and future callers much better. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-26nbd: restore default timeout when setting it to zeroHou Pu
If we configured io timeout of nbd0 to 100s. Later after we finished using it, we configured nbd0 again and set the io timeout to 0. We expect it would timeout after 30 seconds and keep retry. But in fact we could not change the timeout when we set it to 0. the timeout is still the original 100s. So change the timeout to default 30s when we set it to zero. It also behaves same as commit 2da22da57348 ("nbd: fix zero cmd timeout handling v2"). It becomes more important if we were reconfigure a nbd device and the io timeout it set to zero. Because it could take 30s to detect the new socket and thus io could be completed more quickly compared to 100s. Signed-off-by: Hou Pu <houpu@bytedance.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-03Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...
2020-07-08nbd: Fix memory leak in nbd_add_socketZheng Bin
When adding first socket to nbd, if nsock's allocation failed, the data structure member "config->socks" was reallocated, but the data structure member "config->num_connections" was not updated. A memory leak will occur then because the function "nbd_config_put" will free "config->socks" only when "config->num_connections" is not zero. Fixes: 03bf73c315ed ("nbd: prevent memory leak") Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: move failure injection out of blk_mq_complete_requestChristoph Hellwig
Move the call to blk_should_fake_timeout out of blk_mq_complete_request and into the drivers, skipping call sites that are obvious error handlers, and remove the now superflous blk_mq_force_complete_rq helper. This ensures we don't keep injecting errors into completions that just terminate the Linux request after the hardware has been reset or the command has been aborted. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12nbd: requeue command if the soecket is changedHou Pu
In commit 2da22da5734 (nbd: fix zero cmd timeout handling v2), it is allowed to reset timer when it fires if tag_set.timeout is set to zero. If the server is shutdown and a new socket is reconfigured, the request should be requeued to be processed by new server instead of waiting for response from the old one. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12nbd: enable replace socket if only one connection is configuredHou Pu
Nbd server with multiple connections could be upgraded since 560bc4b (nbd: handle dead connections). But if only one conncection is configured, after we take down nbd server, all inflight IO would finally timeout and return error. We could requeue them like what we do with multiple connections and wait for new socket in submit path. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29nbd: add a flush_workqueue in nbd_start_deviceSun Ke
When kzalloc fail, may cause trying to destroy the workqueue from inside the workqueue. If num_connections is m (2 < m), and NO.1 ~ NO.n (1 < n < m) kzalloc are successful. The NO.(n + 1) failed. Then, nbd_start_device will return ENOMEM to nbd_start_device_ioctl, and nbd_start_device_ioctl will return immediately without running flush_workqueue. However, we still have n recv threads. If nbd_release run first, recv threads may have to drop the last config_refs and try to destroy the workqueue from inside the workqueue. To fix it, add a flush_workqueue in nbd_start_device. Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Sun Ke <sunke32@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-16nbd: fix shutdown and recv work deadlock v2Mike Christie
This fixes a regression added with: commit e9e006f5fcf2bab59149cb38a48a4817c1b538b4 Author: Mike Christie <mchristi@redhat.com> Date: Sun Aug 4 14:10:06 2019 -0500 nbd: fix max number of supported devs where we can deadlock during device shutdown. The problem occurs if the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has returned and the userspace app has droppped its reference via closing the device and running nbd_release. The recv_work nbd_config_put call would then drop the refcount to zero and try to destroy the config which would try to do destroy_workqueue from the recv work. This patch just has nbd_start_device_ioctl do a flush_workqueue when it wakes so we know after the ioctl returns running works have exited. This also fixes a possible race where we could try to reuse the device while old recv_works are still running. Cc: stable@vger.kernel.org Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-25Merge tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull additional block driver updates from Jens Axboe: "Here's another block driver update, done to avoid conflicts with the zoned changes coming next. This contains: - Prepare SCSI sd for zone open/close/finish support - Small NVMe pull request - hwmon support (Akinobu) - add new co-maintainer (Christoph) - work-around for a discard issue on non-conformant drives (Eduard) - Small nbd leak fix" * tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block: nbd: prevent memory leak nvme: hwmon: add quirk to avoid changing temperature threshold nvme: hwmon: provide temperature min and max values for each sensor nvmet: add another maintainer nvme: Discard workaround for non-conformant devices nvme: Add hardware monitoring support scsi: sd_zbc: add zone open, close, and finish support
2019-11-21nbd: prevent memory leakNavid Emamdoost
In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the reallocted memory is leak. The correct behaviour should be assigning the reallocted memory to config->socks right after success. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-19nbd:fix memory leak in nbd_get_socket()Sun Ke
Before returning NULL, put the sock first. Cc: stable@vger.kernel.org Fixes: cf1b2326b734 ("nbd: verify socket is supported during setup") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Sun Ke <sunke32@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: verify socket is supported during setupMike Christie
nbd requires socket families to support the shutdown method so the nbd recv workqueue can be woken up from its sock_recvmsg call. If the socket does not support the callout we will leave recv works running or get hangs later when the device or module is removed. This adds a check during socket connection/reconnection to make sure the socket being passed in supports the needed callout. Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: handle racing with error'ed out commandsJosef Bacik
We hit the following warning in production print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700 ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 Workqueue: knbd-recv recv_work [nbd] RIP: 0010:refcount_sub_and_test_checked+0x53/0x60 Call Trace: blk_mq_free_request+0xb7/0xf0 blk_mq_complete_request+0x62/0xf0 recv_work+0x29/0xa1 [nbd] process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 ? rescuer_thread+0x340/0x340 kthread+0x111/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 ---[ end trace b079c3c67f98bb7c ]--- This was preceded by us timing out everything and shutting down the sockets for the device. The problem is we had a request in the queue at the same time, so we completed the request twice. This can actually happen in a lot of cases, we fail to get a ref on our config, we only have one connection and just error out the command, etc. Fix this by checking cmd->status in nbd_read_stat. We only change this under the cmd->lock, so we are safe to check this here and see if we've already error'ed this command out, which would indicate that we've completed it as well. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: protect cmd->status with cmd->lockJosef Bacik
We already do this for the most part, except in timeout and clear_req. For the timeout case we take the lock after we grab a ref on the config, but that isn't really necessary because we're safe to touch the cmd at this point, so just move the order around. For the clear_req cause this is initiated by the user, so again is safe. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-10nbd: fix possible sysfs duplicate warningXiubo Li
1. nbd_put takes the mutex and drops nbd->ref to 0. It then does idr_remove and drops the mutex. 2. nbd_genl_connect takes the mutex. idr_find/idr_for_each fails to find an existing device, so it does nbd_dev_add. 3. just before the nbd_put could call nbd_dev_remove or not finished totally, but if nbd_dev_add try to add_disk, we can hit: debugfs: Directory 'nbd1' with parent 'block' already present! This patch will make sure all the disk add/remove stuff are done by holding the nbd_index_mutex lock. Reported-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17nbd: fix possible page fault for nbd diskXiubo Li
When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same time when the socket is closed due to the server daemon is restarted, just before the last DISCONNET is totally done if we start a new connection by using the old nbd_index, there will be crashing randomly, like: <3>[ 110.151949] block nbd1: Receive control failed (result -32) <1>[ 110.152024] BUG: unable to handle page fault for address: 0000058000000840 <1>[ 110.152063] #PF: supervisor read access in kernel mode <1>[ 110.152083] #PF: error_code(0x0000) - not-present page <6>[ 110.152094] PGD 0 P4D 0 <4>[ 110.152106] Oops: 0000 [#1] SMP PTI <4>[ 110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2 <4>[ 110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 <4>[ 110.152166] Workqueue: knbd-recv recv_work [nbd] <4>[ 110.152187] RIP: 0010:__dev_printk+0xd/0x67 <4>[ 110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...] <4>[ 110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206 <4>[ 110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000 <4>[ 110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f <4>[ 110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56 <4>[ 110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900 <4>[ 110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8 <4>[ 110.152329] FS: 0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000 <4>[ 110.152362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0 <4>[ 110.152401] Call Trace: <4>[ 110.152422] _dev_err+0x6c/0x83 <4>[ 110.152435] nbd_read_stat.cold+0xda/0x578 [nbd] <4>[ 110.152448] ? __switch_to_asm+0x34/0x70 <4>[ 110.152468] ? __switch_to_asm+0x40/0x70 <4>[ 110.152478] ? __switch_to_asm+0x34/0x70 <4>[ 110.152491] ? __switch_to_asm+0x40/0x70 <4>[ 110.152501] ? __switch_to_asm+0x34/0x70 <4>[ 110.152511] ? __switch_to_asm+0x40/0x70 <4>[ 110.152522] ? __switch_to_asm+0x34/0x70 <4>[ 110.152533] recv_work+0x35/0x9e [nbd] <4>[ 110.152547] process_one_work+0x19d/0x340 <4>[ 110.152558] worker_thread+0x50/0x3b0 <4>[ 110.152568] kthread+0xfb/0x130 <4>[ 110.152577] ? process_one_work+0x340/0x340 <4>[ 110.152609] ? kthread_park+0x80/0x80 <4>[ 110.152637] ret_from_fork+0x35/0x40 This is very easy to reproduce by running the nbd-runner. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17nbd: rename the runtime flags as NBD_RT_ prefixedXiubo Li
Preparing for the destory when disconnecting crash fixing. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: fix max number of supported devsMike Christie
This fixes a bug added in 4.10 with commit: commit 9561a7ade0c205bc2ee035a2ac880478dcc1a024 Author: Josef Bacik <jbacik@fb.com> Date: Tue Nov 22 14:04:40 2016 -0500 nbd: add multi-connection support that limited the number of devices to 256. Before the patch we could create 1000s of devices, but the patch switched us from using our own thread to using a work queue which has a default limit of 256 active works. The problem is that our recv_work function sits in a loop until disconnection but only handles IO for one connection. The work is started when the connection is started/restarted, but if we end up creating 257 or more connections, the queue_work call just queues connection257+'s recv_work and that waits for connection 1 - 256's recv_work to be disconnected and that work instance completing. Instead of reverting back to kthreads, this has us allocate a workqueue_struct per device, so we can block in the work. Cc: stable@vger.kernel.org Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: fix zero cmd timeout handling v2Mike Christie
This fixes a regression added in 4.9 with commit: commit 0eadf37afc2500e1162c9040ec26a705b9af8d47 Author: Josef Bacik <jbacik@fb.com> Date: Thu Sep 8 12:33:40 2016 -0700 nbd: allow block mq to deal with timeouts where before the patch userspace would set the timeout to 0 to disable it. With the above patch, a zero timeout tells the block layer to use the default value of 30 seconds. For setups where commands can take a long time or experience transient issues like network disruptions this then results in IO errors being sent to the application. To fix this, the patch still uses the common block layer timeout framework, but if zero is set, nbd just logs a message and then resets the timer when it expires. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: add missing config putMike Christie
Fix bug added with the patch: commit 8f3ea35929a0806ad1397db99a89ffee0140822a Author: Josef Bacik <josef@toxicpanda.com> Date: Mon Jul 16 12:11:35 2018 -0400 nbd: handle unexpected replies better where if the timeout handler runs when the completion path is and we fail to grab the mutex in the timeout handler we will leave a config reference and cannot free the config later. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: add function to convert blk req op to nbd cmdMike Christie
This adds a helper function to convert a block req op to a nbd cmd type. It will be used in the last patch to log the type in the timeout handler. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: add set cmd timeout helperMike Christie
Add a helper to set the cmd timeout. It does not really do a lot now, but will be more useful in the next patches. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31nbd: replace kill_bdev() with __invalidate_device() againMunehisa Kamata
Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Munehisa Kamata <kamatam@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10nbd: add netlink reconfigure resize supportMike Christie
If the device is setup with ioctl we can resize the device after the initial setup, but if the device is setup with netlink we cannot use the resize related ioctls and there is no netlink reconfigure size ATTR handling code. This patch adds netlink reconfigure resize support to match the ioctl interface. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10nbd: fix crash when the blksize is zeroXiubo Li
This will allow the blksize to be set zero and then use 1024 as default. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> [fix to use goto out instead of return in genl_connect] Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 127Thomas Gleixner
Based on 1 normalized pattern(s): this file is released under gplv2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527063114.295960793@linutronix.de Link: https://lkml.kernel.org/r/20190524100843.018830140@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-28 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Introduce BPF socket local storage map so that BPF programs can store private data they associate with a socket (instead of e.g. separate hash table), from Martin. 2) Add support for bpftool to dump BTF types. This is done through a new `bpftool btf dump` sub-command, from Andrii. 3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which was currently not supported since skb was used to lookup netns, from Stanislav. 4) Add an opt-in interface for tracepoints to expose a writable context for attached BPF programs, used here for NBD sockets, from Matt. 5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel. 6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to support tunnels such as sit. Add selftests as well, from Willem. 7) Various smaller misc fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 13:46:43 +0000