summaryrefslogtreecommitdiff
path: root/drivers/block/nbd.c
AgeCommit message (Collapse)Author
2020-03-12nbd: requeue command if the soecket is changedHou Pu
In commit 2da22da5734 (nbd: fix zero cmd timeout handling v2), it is allowed to reset timer when it fires if tag_set.timeout is set to zero. If the server is shutdown and a new socket is reconfigured, the request should be requeued to be processed by new server instead of waiting for response from the old one. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12nbd: enable replace socket if only one connection is configuredHou Pu
Nbd server with multiple connections could be upgraded since 560bc4b (nbd: handle dead connections). But if only one conncection is configured, after we take down nbd server, all inflight IO would finally timeout and return error. We could requeue them like what we do with multiple connections and wait for new socket in submit path. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-29nbd: add a flush_workqueue in nbd_start_deviceSun Ke
When kzalloc fail, may cause trying to destroy the workqueue from inside the workqueue. If num_connections is m (2 < m), and NO.1 ~ NO.n (1 < n < m) kzalloc are successful. The NO.(n + 1) failed. Then, nbd_start_device will return ENOMEM to nbd_start_device_ioctl, and nbd_start_device_ioctl will return immediately without running flush_workqueue. However, we still have n recv threads. If nbd_release run first, recv threads may have to drop the last config_refs and try to destroy the workqueue from inside the workqueue. To fix it, add a flush_workqueue in nbd_start_device. Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Sun Ke <sunke32@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-16nbd: fix shutdown and recv work deadlock v2Mike Christie
This fixes a regression added with: commit e9e006f5fcf2bab59149cb38a48a4817c1b538b4 Author: Mike Christie <mchristi@redhat.com> Date: Sun Aug 4 14:10:06 2019 -0500 nbd: fix max number of supported devs where we can deadlock during device shutdown. The problem occurs if the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has returned and the userspace app has droppped its reference via closing the device and running nbd_release. The recv_work nbd_config_put call would then drop the refcount to zero and try to destroy the config which would try to do destroy_workqueue from the recv work. This patch just has nbd_start_device_ioctl do a flush_workqueue when it wakes so we know after the ioctl returns running works have exited. This also fixes a possible race where we could try to reuse the device while old recv_works are still running. Cc: stable@vger.kernel.org Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-25Merge tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull additional block driver updates from Jens Axboe: "Here's another block driver update, done to avoid conflicts with the zoned changes coming next. This contains: - Prepare SCSI sd for zone open/close/finish support - Small NVMe pull request - hwmon support (Akinobu) - add new co-maintainer (Christoph) - work-around for a discard issue on non-conformant drives (Eduard) - Small nbd leak fix" * tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block: nbd: prevent memory leak nvme: hwmon: add quirk to avoid changing temperature threshold nvme: hwmon: provide temperature min and max values for each sensor nvmet: add another maintainer nvme: Discard workaround for non-conformant devices nvme: Add hardware monitoring support scsi: sd_zbc: add zone open, close, and finish support
2019-11-21nbd: prevent memory leakNavid Emamdoost
In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the reallocted memory is leak. The correct behaviour should be assigning the reallocted memory to config->socks right after success. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-19nbd:fix memory leak in nbd_get_socket()Sun Ke
Before returning NULL, put the sock first. Cc: stable@vger.kernel.org Fixes: cf1b2326b734 ("nbd: verify socket is supported during setup") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Sun Ke <sunke32@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: verify socket is supported during setupMike Christie
nbd requires socket families to support the shutdown method so the nbd recv workqueue can be woken up from its sock_recvmsg call. If the socket does not support the callout we will leave recv works running or get hangs later when the device or module is removed. This adds a check during socket connection/reconnection to make sure the socket being passed in supports the needed callout. Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: handle racing with error'ed out commandsJosef Bacik
We hit the following warning in production print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700 ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 Workqueue: knbd-recv recv_work [nbd] RIP: 0010:refcount_sub_and_test_checked+0x53/0x60 Call Trace: blk_mq_free_request+0xb7/0xf0 blk_mq_complete_request+0x62/0xf0 recv_work+0x29/0xa1 [nbd] process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 ? rescuer_thread+0x340/0x340 kthread+0x111/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 ---[ end trace b079c3c67f98bb7c ]--- This was preceded by us timing out everything and shutting down the sockets for the device. The problem is we had a request in the queue at the same time, so we completed the request twice. This can actually happen in a lot of cases, we fail to get a ref on our config, we only have one connection and just error out the command, etc. Fix this by checking cmd->status in nbd_read_stat. We only change this under the cmd->lock, so we are safe to check this here and see if we've already error'ed this command out, which would indicate that we've completed it as well. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: protect cmd->status with cmd->lockJosef Bacik
We already do this for the most part, except in timeout and clear_req. For the timeout case we take the lock after we grab a ref on the config, but that isn't really necessary because we're safe to touch the cmd at this point, so just move the order around. For the clear_req cause this is initiated by the user, so again is safe. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-10nbd: fix possible sysfs duplicate warningXiubo Li
1. nbd_put takes the mutex and drops nbd->ref to 0. It then does idr_remove and drops the mutex. 2. nbd_genl_connect takes the mutex. idr_find/idr_for_each fails to find an existing device, so it does nbd_dev_add. 3. just before the nbd_put could call nbd_dev_remove or not finished totally, but if nbd_dev_add try to add_disk, we can hit: debugfs: Directory 'nbd1' with parent 'block' already present! This patch will make sure all the disk add/remove stuff are done by holding the nbd_index_mutex lock. Reported-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17nbd: fix possible page fault for nbd diskXiubo Li
When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same time when the socket is closed due to the server daemon is restarted, just before the last DISCONNET is totally done if we start a new connection by using the old nbd_index, there will be crashing randomly, like: <3>[ 110.151949] block nbd1: Receive control failed (result -32) <1>[ 110.152024] BUG: unable to handle page fault for address: 0000058000000840 <1>[ 110.152063] #PF: supervisor read access in kernel mode <1>[ 110.152083] #PF: error_code(0x0000) - not-present page <6>[ 110.152094] PGD 0 P4D 0 <4>[ 110.152106] Oops: 0000 [#1] SMP PTI <4>[ 110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2 <4>[ 110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 <4>[ 110.152166] Workqueue: knbd-recv recv_work [nbd] <4>[ 110.152187] RIP: 0010:__dev_printk+0xd/0x67 <4>[ 110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...] <4>[ 110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206 <4>[ 110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000 <4>[ 110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f <4>[ 110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56 <4>[ 110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900 <4>[ 110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8 <4>[ 110.152329] FS: 0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000 <4>[ 110.152362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0 <4>[ 110.152401] Call Trace: <4>[ 110.152422] _dev_err+0x6c/0x83 <4>[ 110.152435] nbd_read_stat.cold+0xda/0x578 [nbd] <4>[ 110.152448] ? __switch_to_asm+0x34/0x70 <4>[ 110.152468] ? __switch_to_asm+0x40/0x70 <4>[ 110.152478] ? __switch_to_asm+0x34/0x70 <4>[ 110.152491] ? __switch_to_asm+0x40/0x70 <4>[ 110.152501] ? __switch_to_asm+0x34/0x70 <4>[ 110.152511] ? __switch_to_asm+0x40/0x70 <4>[ 110.152522] ? __switch_to_asm+0x34/0x70 <4>[ 110.152533] recv_work+0x35/0x9e [nbd] <4>[ 110.152547] process_one_work+0x19d/0x340 <4>[ 110.152558] worker_thread+0x50/0x3b0 <4>[ 110.152568] kthread+0xfb/0x130 <4>[ 110.152577] ? process_one_work+0x340/0x340 <4>[ 110.152609] ? kthread_park+0x80/0x80 <4>[ 110.152637] ret_from_fork+0x35/0x40 This is very easy to reproduce by running the nbd-runner. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17nbd: rename the runtime flags as NBD_RT_ prefixedXiubo Li
Preparing for the destory when disconnecting crash fixing. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: fix max number of supported devsMike Christie
This fixes a bug added in 4.10 with commit: commit 9561a7ade0c205bc2ee035a2ac880478dcc1a024 Author: Josef Bacik <jbacik@fb.com> Date: Tue Nov 22 14:04:40 2016 -0500 nbd: add multi-connection support that limited the number of devices to 256. Before the patch we could create 1000s of devices, but the patch switched us from using our own thread to using a work queue which has a default limit of 256 active works. The problem is that our recv_work function sits in a loop until disconnection but only handles IO for one connection. The work is started when the connection is started/restarted, but if we end up creating 257 or more connections, the queue_work call just queues connection257+'s recv_work and that waits for connection 1 - 256's recv_work to be disconnected and that work instance completing. Instead of reverting back to kthreads, this has us allocate a workqueue_struct per device, so we can block in the work. Cc: stable@vger.kernel.org Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: fix zero cmd timeout handling v2Mike Christie
This fixes a regression added in 4.9 with commit: commit 0eadf37afc2500e1162c9040ec26a705b9af8d47 Author: Josef Bacik <jbacik@fb.com> Date: Thu Sep 8 12:33:40 2016 -0700 nbd: allow block mq to deal with timeouts where before the patch userspace would set the timeout to 0 to disable it. With the above patch, a zero timeout tells the block layer to use the default value of 30 seconds. For setups where commands can take a long time or experience transient issues like network disruptions this then results in IO errors being sent to the application. To fix this, the patch still uses the common block layer timeout framework, but if zero is set, nbd just logs a message and then resets the timer when it expires. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: add missing config putMike Christie
Fix bug added with the patch: commit 8f3ea35929a0806ad1397db99a89ffee0140822a Author: Josef Bacik <josef@toxicpanda.com> Date: Mon Jul 16 12:11:35 2018 -0400 nbd: handle unexpected replies better where if the timeout handler runs when the completion path is and we fail to grab the mutex in the timeout handler we will leave a config reference and cannot free the config later. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: add function to convert blk req op to nbd cmdMike Christie
This adds a helper function to convert a block req op to a nbd cmd type. It will be used in the last patch to log the type in the timeout handler. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20nbd: add set cmd timeout helperMike Christie
Add a helper to set the cmd timeout. It does not really do a lot now, but will be more useful in the next patches. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-31nbd: replace kill_bdev() with __invalidate_device() againMunehisa Kamata
Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Munehisa Kamata <kamatam@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10nbd: add netlink reconfigure resize supportMike Christie
If the device is setup with ioctl we can resize the device after the initial setup, but if the device is setup with netlink we cannot use the resize related ioctls and there is no netlink reconfigure size ATTR handling code. This patch adds netlink reconfigure resize support to match the ioctl interface. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10nbd: fix crash when the blksize is zeroXiubo Li
This will allow the blksize to be set zero and then use 1024 as default. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> [fix to use goto out instead of return in genl_connect] Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 127Thomas Gleixner
Based on 1 normalized pattern(s): this file is released under gplv2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527063114.295960793@linutronix.de Link: https://lkml.kernel.org/r/20190524100843.018830140@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-28 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Introduce BPF socket local storage map so that BPF programs can store private data they associate with a socket (instead of e.g. separate hash table), from Martin. 2) Add support for bpftool to dump BTF types. This is done through a new `bpftool btf dump` sub-command, from Andrii. 3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which was currently not supported since skb was used to lookup netns, from Stanislav. 4) Add an opt-in interface for tracepoints to expose a writable context for attached BPF programs, used here for NBD sockets, from Matt. 5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel. 6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to support tunnels such as sit. Add selftests as well, from Willem. 7) Various smaller misc fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26nbd: add tracepoints for send/receive timingAndrew Hall
This adds four tracepoints to nbd, enabling separate tracing of payload and header sending/receipt. In the send path for headers that have already been sent, we also explicitly initialize the handle so it can be referenced by the later tracepoint. Signed-off-by: Andrew Hall <hall@fb.com> Signed-off-by: Matt Mullins <mmullins@fb.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-26nbd: trace sending nbd requestsMatt Mullins
This adds a tracepoint that can both observe the nbd request being sent to the server, as well as modify that request , e.g., setting a flag in the request that will cause the server to collect detailed tracing data. The struct request * being handled is included to permit correlation with the block tracepoints. Signed-off-by: Matt Mullins <mmullins@fb.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22genetlink: make policy common to familyJohannes Berg
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28nbd: propagate genlmsg_reply return codeLi RongQing
genlmsg_reply can fail, so propagate its return code Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15block: kill BLK_MQ_F_SG_MERGEMing Lei
QUEUE_FLAG_NO_SG_MERGE has been killed, so kill BLK_MQ_F_SG_MERGE too. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-15nbd: Use set_blocksize() to set device blocksizeJan Kara
NBD can update block device block size implicitely through bd_set_size(). Make it explicitely set blocksize with set_blocksize() as this behavior of bd_set_size() is going away. CC: Josef Bacik <jbacik@fb.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-08blk-mq-tag: change busy_iter_fn to return whether to continue or notJens Axboe
We have this functionality in sbitmap, but we don't export it in blk-mq for users of the tags busy iteration. This can be useful for stopping the iteration, if the caller doesn't need to find more requests. Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-24iov_iter: Separate type from direction and use accessor functionsDavid Howells
In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-04nbd: don't allow invalid blocksize settingsJens Axboe
syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl. We need proper validation of the input here. Not just if it's zero, but also if the value is a power-of-2 and in a valid range. Add that. Cc: stable@vger.kernel.org Reported-by: syzbot <syzbot+25dbecbec1e62c6b0dd4@syzkaller.appspotmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20nbd: constify nla_policyStephen Hemminger
The netlink policy should be const like other drivers. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16nbd: handle unexpected replies betterJosef Bacik
If the server or network is misbehaving and we get an unexpected reply we can sometimes miss the request not being started and wait on a request and never get a response, or even double complete the same request. Fix this by replacing the send_complete completion with just a per command lock. Add a per command cookie as well so that we can know if we're getting a double completion for a previous event. Also check to make sure we dont have REQUEUED set as that means we raced with the timeout handler and need to just let the retry occur. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-16nbd: don't requeue the same request twice.Josef Bacik
We can race with the snd timeout and the per-request timeout and end up requeuing the same request twice. We can't use the send_complete completion to tell if everything is ok because we hold the tx_lock during send, so the timeout stuff will block waiting to mark the socket dead, and we could be marked complete and still requeue. Instead add a flag to the socket so we know whether we've been requeued yet. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-20nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.Doron Roberts-Kedes
If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will issue a disconnect from nbd_release if the device has no remaining bdev->bd_openers. Fix ret val so reconfigure with only setting the flag succeeds. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-05nbd: set discard_alignment to the granularityJosef Bacik
Technically we should be able to get away with 0 as the discard_alignment, but there's no way currently for the protocol to indicate different alignments, and in real life most disks have discard_alignment == discard_granularity. Just set our alignment to our blocksize to make sure discards will actually work properly with 4k drives. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-05nbd: Consistently use request pointer in debug messages.Kevin Vigor
Existing dev_dbg messages sometimes identify request using request pointer, sometimes using nbd_cmd pointer. This makes it hard to follow request flow. Consistently use request pointer instead. Reviewed-by: Josef Bacik <jbacik@toxicpanda.com> Signed-off-by: Kevin Vigor <kvigor@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30blk-mq: only iterate over inflight requests in blk_mq_tagset_busy_iterChristoph Hellwig
We already check for started commands in all callbacks, but we should also protect against already completed commands. Do this by taking the checks to common code. Acked-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30nbd: clear DISCONNECT_REQUESTED flag once disconnection occurs.Kevin Vigor
When a userspace client requests a NBD device be disconnected, the DISCONNECT_REQUESTED flag is set. While this flag is set, the driver will not inform userspace when a connection is closed. Unfortunately the flag was never cleared, so once a disconnect was requested the driver would thereafter never tell userspace about a closed connection. Thus when connections failed due to timeout, no attempt to reconnect was made and eventually the device would fail. Fix by clearing the DISCONNECT_REQUESTED flag (and setting the DISCONNECTED flag) once all connections are closed. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Kevin Vigor <kvigor@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29nbd: complete requests from ->timeoutChristoph Hellwig
By completing the request entirely in the driver we can remove the BLK_EH_HANDLED return value and thus the split responsibility between the driver and the block layer that has been causing trouble. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONEChristoph Hellwig
The BLK_EH_NOT_HANDLED implies nothing happen, but very often that is not what is happening - instead the driver already completed the command. Fix the symbolic name to reflect that a little better. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-24block drivers/block: Use octal not symbolic permissionsJoe Perches
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped modified multi-line calls to a single line where appropriate o Realign modified multi-line calls to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-23nbd: set discard granularity properlyJosef Bacik
For some reason we had discard granularity set to 512 always even when discards were disabled. Fix this by having the default be 0, and then if we turn it on set the discard granularity to the blocksize. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-22block/ndb: add WQ_UNBOUND to the knbd-recv workqueueDan Melnic
Add WQ_UNBOUND to the knbd-recv workqueue so we're not bound to a single CPU that is selected at device creation time. Signed-off-by: Dan Melnic <dmm@fb.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16nbd: call nbd_bdev_reset instead of bd_set_size on disconnectJosef Bacik
We need to make sure we don't just set the size of the bdev to 0 while it's being used by a file system. We have the appropriate check in nbd_bdev_reset, simply use that helper instead. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 04:15:31 +0000