summaryrefslogtreecommitdiff
path: root/drivers/block/cciss.c
AgeCommit message (Collapse)Author
2008-05-01cciss: assign PDE->data before gluing PDE into /proc treeDenis V. Lunev
Simply replace proc_create and further data assigned with proc_create_data. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Mike Miller <mike.miller@hp.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29proc: remove proc_root_driverAlexey Dobriyan
Use creation by full path: "driver/foo". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21cciss: Fix race between disk-adding code and interrupt handlerscameron@beardog.cca.cpqcorp.net
Fix race condition between cciss_init_one(), cciss_update_drive_info(), and cciss_check_queues(). Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-11cciss: error: implicit declaration of function 'sg_init_table'Mike Pagano
This patch adds the missing include directive <linux/scatterlist.h> to the cciss.c source file.   This was discovered by our release team when building the kernel for the Alpha architecture. Errors were found as references to functions 'sg_init_table' and 'sg_page' do not exist without the include for Alpha. Signed-off-by: Mike Pagano <mpagano@gentoo.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04cciss: remove READ_AHEAD define and use block layer defaultsMike Miller
This patch removes the #define READ_AHEAD 1024 from the driver and uses the block layer defaults, instead. We have found that under certain workloads the setting can cause a disk connected to the e200 controller to go offline. If the disk hiccups the link may try to downshift but the controller is never notified that the link successfully completed the renegotiation. We've also found that performance using the block layer default of 32 pages was on par with the 1024 setting. We tried setting it to zero at one time based on info from our firmware guys but that killed performance. Turns out we were talking about 2 different read ahead settings. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-04resubmit: cciss: procfs updates to display info about manyMike Miller
volumes This patch allows us to display information about all of the logical volumes configured on a particular controller without stepping on memory even when there are many volumes (128 or more) configured. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-06cciss: use upper_32_bits() macro to eliminate warningsRandy Dunlap
Use upper_32_bits(x) macro to handle shifts that may be >= the width of the data type. drivers/block/cciss.c: In function 'do_cciss_request': drivers/block/cciss.c:2655: warning: right shift count >= width of type drivers/block/cciss.c:2656: warning: right shift count >= width of type drivers/block/cciss.c:2657: warning: right shift count >= width of type drivers/block/cciss.c:2658: warning: right shift count >= width of type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-29cciss: fix bug in overriding ->data_len before completionJens Axboe
For BLOCK_PC requests, we need that length for completing the request. Andrew Vasquez <andrew.vasquez@qlogic.com> reported the following oops Hitting a consistent BUG() with recent Linus' linux-2.6.git: [ 12.941428] ------------[ cut here ]------------ [ 12.944874] kernel BUG at drivers/block/cciss.c:1260! [ 12.944874] invalid opcode: 0000 [1] SMP [ 12.944874] CPU 0 [ 12.944874] Modules linked in: [ 12.944874] Pid: 0, comm: swapper Not tainted 2.6.24 #43 [ 12.944874] RIP: 0010:[<ffffffff8039e43d>] [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf [ 12.944874] RSP: 0018:ffffffff8063aed0 EFLAGS: 00010202 [ 12.944874] RAX: 0000000000000001 RBX: ffff8100cf800010 RCX: ffff81042f1253b0 [ 12.944874] RDX: ffff81042de398f0 RSI: ffff81042de398f0 RDI: 0000000000000001 [ 12.944874] RBP: ffff81042daa0000 R08: ffff81042f1253b0 R09: 0000000000000001 [ 12.944874] R10: 00000000000000fe R11: 0000000000000000 R12: 0000000000000002 [ 12.944874] R13: 0000000000000001 R14: ffff8100cf800000 R15: ffff81042de398f0 [ 12.944874] FS: 0000000000000000(0000) GS:ffffffff805bb000(0000) knlGS:0000000000000000 [ 12.944874] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 12.944874] CR2: 00002afed7eea340 CR3: 000000042dbba000 CR4: 00000000000006e0 [ 12.944874] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.944874] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 12.944874] Process swapper (pid: 0, threadinfo ffffffff805f4000, task ffffffff805624a0) [ 12.944874] Stack: 0000000000000000 ffffffff8063af10 0000000000000001 ffffffff80632d60 [ 12.944874] 0000000000000000 000000000000000a ffffffff805bb900 ffffffff8032038f [ 12.944874] ffffffff8063af10 ffffffff8063af10 ffffffff805bb940 ffffffff802346b4 [ 12.944874] Call Trace: [ 12.944874] <IRQ> [<ffffffff8032038f>] blk_done_softirq+0x69/0x78 [ 12.944874] [<ffffffff802346b4>] __do_softirq+0x6f/0xd8 [ 12.944874] [<ffffffff8020c45c>] call_softirq+0x1c/0x30 [ 12.944874] [<ffffffff8020e347>] do_softirq+0x30/0x80 [ 12.944874] [<ffffffff8020e409>] do_IRQ+0x72/0xd9 [ 12.944874] [<ffffffff8020a50a>] mwait_idle+0x0/0x46 [ 12.944874] [<ffffffff8020a3da>] default_idle+0x0/0x3d [ 12.944874] [<ffffffff8020b7e1>] ret_from_intr+0x0/0xa [ 12.944874] <EOI> [<ffffffff8020a54c>] mwait_idle+0x42/0x46 [ 12.944874] [<ffffffff8020a481>] cpu_idle+0x6a/0xae [ 12.944874] [ 12.944874] [ 12.944874] Code: 0f 0b eb fe 48 8d 85 d8 c0 00 00 48 89 04 24 48 89 c7 e8 e5 [ 12.944874] RIP [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf [ 12.944874] RSP <ffffffff8063aed0> [ 12.944903] ---[ end trace e9c631603f90d22f ]--- which is caused by blk_end_request() returning 'not done' for a request, since it gets asked to complete zero bytes. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28blk_end_request: changing cciss (take 4)Kiyoshi Ueda
This patch converts cciss to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. cciss is a little bit different from "normal" drivers. cciss directly calls bio_endio() and disk_stat_add() when completing request. But those can be replaced with __end_that_request_first(). After the replacement, request completion procedures of those drivers become like the following: o end_that_request_first() o add_disk_randomness() o end_that_request_last() This can be converted to blk_end_request() by following the rule (a) mentioned in the patch subject "[PATCH 01/30] blk_end_request: add new request completion interface". Cc: Mike Miller <mike.miller@hp.com> Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-14cciss: section mismatchRandy Dunlap
Mark cciss_pci_init() as __devinit, to fix section mismatch warning. WARNING: vmlinux.o(.text+0x601fc9): Section mismatch: reference to .init.text: (between 'cciss_pci_init' and 'cciss_getgeometry') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-29cciss: update copyright noticesMike Miller
This patch updates the copyright information for the cciss driver. It includes extending the year to 2007 (how timely) and some minor corrections deemed necessary by HP legal and the Open Source Review Board. Please consider this patch for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> -------------------------------------------------------------------------------- Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-17Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [SCSI] Remove full sg table memset() [SCSI] ide-scsi: remove usage of sg_last() Fix loop terminating conditions in fill_sg(). [BLOCK] Clear sg entry before filling in blk_rq_map_sg() IA64: iommu uses sg_next with an invalid sg element cciss: disable DMA refetch on Smart Array P600 swiotlb: fix map_sg failure handling SPARC64: fix iommu sg chaining [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17drivers/block/cciss.c: fix check-after-useAdrian Bunk
The Coverity checker spotted that we have already oops'ed if "disk" was NULL. Since "disk" being NULL seems impossible at this point this patch removes the NULL check. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17cciss: fix error reporting for SG_IOSteve Cameron
This fixes a problem with the way cciss was filling out the "errors" field of the request structure upon completion of requests. Previously, it just put a 1 or a 0 in there and used the negation of this as the uptodate parameter to one of the functions in the block layer, being a block device. For the SG_IO ioctl, this was not sufficient, and we noticed that, for example, sg_turs from sg3_utils did not correctly detect problems due to cciss having set rq->errors incorrectly. Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17cciss: disable DMA refetch on Smart Array P600Mike Miller (OS Dev)
This patch disables DMA refetch in the PCI bridge. We have disabled DMA prefetch for quite some time. Testing with XEN revealed another ASIC bug. If dom0 resides on a P600 the board can can an MCA bi accessing invalid memory addresses. Apparently, we need to disable both prefetch and refetch. My understanding is a refetch operation should not occur but it is a valid thing to do if prefetched data is no longer available for whatever reason. Please consider this patch for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> -------------------------------------------------------------------------------- Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16Merge branch 'sglist-arch' into for-linusJens Axboe
2007-10-16Panic in blk_rq_map_sg() from CCISS driverLee Schermerhorn
New scatter/gather list chaining [sg_next()] treats 'page' member of struct scatterlist with low bit set [0x01] as a chain pointer to another struct scatterlist [array]. The CCISS driver request function passes an uninitialized, temporary, on-stack scatterlist array to blk_rq_map_sq(). sg_next() interprets random data on the stack as a chain pointer and eventually tries to de-reference an invalid pointer, resulting in: [<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170 PGD 6090c3067 PUD 0 Oops: 0000 [1] SMP last sysfs file: /block/cciss!c0d0/cciss!c0d0p1/dev CPU 6 Modules linked in: ehci_hcd ohci_hcd uhci_hcd Pid: 1, comm: init Not tainted 2.6.23-rc6-mm1 #3 RIP: 0010:[<ffffffff8031dd70>] [<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170 RSP: 0018:ffff81060901f768 EFLAGS: 00010206 RAX: 000000040b161000 RBX: ffff81060901f7d8 RCX: 000000040b162c00 RDX: 0000000000000000 RSI: ffff81060b13a260 RDI: ffff81060b139600 RBP: 0000000000001400 R08: 00000000fffffffe R09: 0000000000000400 R10: 0000000000000000 R11: 000000040b163000 R12: ffff810102fe0000 R13: 0000000000000001 R14: 0000000000000001 R15: 00001e0000000000 FS: 00000000026108f0(0063) GS:ffff810409000b80(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000010000001e CR3: 00000006090c6000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process init (pid: 1, threadinfo ffff81060901e000, task ffff810409020800) last branch before last exception/interrupt from [<ffffffff8031de0a>] blk_rq_map_sg+0x10a/0x170 to [<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170 Stack: 000000018068ea00 ffff810102fe0000 0000000000000000 ffff810011400000 0000000000000002 0000000000000000 ffff81040b172000 ffffffff803acd3d 0000000000003ec1 ffff8106090d5000 ffff8106090d5000 ffff810102fe0000 Call Trace: [<ffffffff803acd3d>] do_cciss_request+0x15d/0x4c0 [<ffffffff80298968>] new_slab+0x1c8/0x270 [<ffffffff80298ffd>] __slab_alloc+0x22d/0x470 [<ffffffff8027327b>] mempool_alloc+0x4b/0x130 [<ffffffff8032b21e>] cfq_set_request+0xee/0x380 [<ffffffff8027327b>] mempool_alloc+0x4b/0x130 [<ffffffff8031ff98>] get_request+0x168/0x360 [<ffffffff80331b0d>] rb_insert_color+0x8d/0x110 [<ffffffff8031cfd8>] elv_rb_add+0x58/0x60 [<ffffffff8032a329>] cfq_add_rq_rb+0x69/0xa0 [<ffffffff8031c1ab>] elv_merged_request+0x5b/0x60 [<ffffffff803224fd>] __make_request+0x23d/0x650 [<ffffffff80298ffd>] __slab_alloc+0x22d/0x470 [<ffffffff80270000>] generic_write_checks+0x140/0x190 [<ffffffff8031f012>] generic_make_request+0x1c2/0x3a0 <etc> Kernel panic - not syncing: Attempted to kill init! This patch initializes the tmp_sg array to zeroes. Perhaps not the ultimate fix, but an effective work-around. I can now boot 23-rc6-mm1 on an HP Proliant x86_64 with CCISS boot disk. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> drivers/block/cciss.c | 1 + 1 file changed, 1 insertion(+) Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16drivers/block/cpqarray,cciss: kill unused varJeff Garzik
The recent bio work and subsequent fixups created unused variables. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-14more trivial signedness fixes in driversAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10Drop 'size' argument from bio_endio and bi_end_ioNeilBrown
As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-08-11drivers/block/cciss.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
drivers/block/cciss.c | 104285 -> 104168 (-117 bytes) drivers/block/cciss.o | 277400 -> 277124 (-276 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-31cciss: fix memory leakJesper Juhl
There's a memory leak in the cciss driver. in alloc_cciss_hba() we may leak sizeof(ctlr_info_t) bytes if a call to alloc_disk(1 << NWD_SHIFT) fails. This patch should fix the issue. Spotted by the Coverity checker. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-24[BLOCK] Get rid of request_queue_t typedefJens Axboe
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16Fix too few arguments to function `scsi_cmd_ioctl'S.Çağlar Onur
This corrects the following compile error introduced by the merge of the new bsg layer in commit e245befce7af0a1e1347079ed62695b059594bd4: caglar@zangetsu linux-2.6 $ make CHK include/linux/version.h CHK include/linux/utsrelease.h CALL scripts/checksyscalls.sh CHK include/linux/compile.h LD drivers/block/built-in.o CC [M] drivers/block/cciss.o drivers/block/cciss.c: In function `cciss_ioctl': drivers/block/cciss.c:1173: warning: passing arg 2 of `scsi_cmd_ioctl' from incompatible pointer type drivers/block/cciss.c:1173: warning: passing arg 3 of `scsi_cmd_ioctl' makes pointer from integer without a cast drivers/block/cciss.c:1173: warning: passing arg 4 of `scsi_cmd_ioctl' makes integer from pointer without a cast drivers/block/cciss.c:1173: error: too few arguments to function `scsi_cmd_ioctl' ... make[2]: *** [drivers/block/cciss.o] Hata 1 make[1]: *** [drivers/block] Hata 2 make: *** [drivers] Hata 2 Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10cciss: add new controller support for P700mMike Miller (OS Dev
This patch adds support for the Smart Array P700m SAS controller. This new controller will ship Fall 2007. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-05-18cciss: Fix pci_driver.shutdown while device is still activeGerald Britton
Fix an Oops in the cciss driver caused by system shutdown while a filesystem on a cciss device is still active. The cciss_remove_one function only properly removes the device if the device has been cleanly released by its users, which is not the case when the pci_driver.shutdown method is called. This patch adds a new cciss_shutdown function to better match the pattern used by various SCSI drivers: deactivate device interrupts and flush caches. It also alters the cciss_remove_one function to match and readds the __devexit annotation that was removed when cciss_remove_one was serving as the pci_driver.shutdown method. Signed-off-by: Gerald Britton <gbritton@alum.mit.edu> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08cciss: include scsi/scsi.h unconditionallyStephen Cameron
Make cciss unconditionally include scsi/scsi.h, because of the use of SCSI_IOCTL_GET_IDLUN and SCSI_IOCTL_GET_BUS_NUMBER. Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08cciss: set rq->errors more correctly in driverMike Miller (OS Dev)
Set rq->errors more correctly in cciss driver. Previously we had set it synonymously with the meaning of the last parameter of end_that_last_request and complete_buffers (the "uptodate" parameter) and had gotten away with it for all this time because nobody ever looked at rq->errors. SCSI_IOCTL_SEND_COMMAND looks at rq->errors, so now it matters that it be right. Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com> Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08cciss: add SG_IO ioctl to ccissMike Miller (OS Dev)
For all of you that think cciss should be a scsi driver here is the patch that you have been waiting for all these years. This patch actually adds the SG_IO ioctl to cciss. The primary purpose is for clustering and high-availibilty. But now anyone can exploit this ioctl in any manner they wish. Note, SCSI_IOCTL_SEND_COMMAND doesn't work with this patch due to rq->errors being set incorrectly. Subsequent patch fixes that. Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com> Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08cciss: reformat error handlingMike Miller (OS Dev)
Reformat some error handling code to reduce line lengths a bit. Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com> Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-12[PATCH] cciss: unregister from SCSI before tearing down device resourcesBjorn Helgaas
We must unregister from SCSI before we unmap device resources and unhook the IRQ handler. Otherwise, SCSI may send us more requests, and we won't be able to handle them. I see the following oops during every reboot of my HP DL360: ... Unmounting local filesystems...done. Rebooting... Completed flushing cache on controller 0 BUG: unable to handle kernel paging request at virtual address f8808040 printing eip: c02dc72b *pde = 02120067 *pte = 00000000 Oops: 0002 [#1] SMP Modules linked in: CPU: 1 EIP: 0060:[<c02dc72b>] Not tainted VLI EFLAGS: 00010046 (2.6.21-rc6 #1) EIP is at SA5_submit_command+0xb/0x20 eax: f8808000 ebx: f7a00000 ecx: f79f0000 edx: 37a00000 esi: f79f0000 edi: 00000000 ebp: 00000000 esp: dd717a44 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process khelper (pid: 1427, ti=dd716000 task=c2260a70 task.ti=dd716000) Stack: c02df2c0 f7a00000 f7a00000 00d41008 c02df691 00000000 00000010 00000002 00000001 f79f0000 f7fff844 c1398420 00000000 00000000 00001000 230a3020 69666564 5420656e 50434f49 465f544b 4853554c 44414552 0a312009 66656423 Call Trace: [<c02df2c0>] start_io+0x80/0x120 [<c02df691>] do_cciss_request+0x331/0x350 [<c014242a>] mempool_alloc+0x2a/0xe0 [<c020ad71>] blk_alloc_request+0x61/0x80 [<c020b02e>] get_request+0x15e/0x1e0 [<c01595e0>] cache_alloc_refill+0xb0/0x1e0 [<c021049d>] as_update_rq+0x2d/0x80 [<c0210d28>] as_add_request+0x68/0x90 [<c0207f99>] elv_insert+0x119/0x160 [<c020bd0b>] __make_request+0xcb/0x320 [<c0122ee0>] lock_timer_base+0x20/0x50 [<c0123096>] del_timer+0x56/0x60 [<c020a7b8>] blk_remove_plug+0x38/0x70 [<c020a815>] __generic_unplug_device+0x25/0x30 [<c020a835>] generic_unplug_device+0x15/0x30 ... Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-04[PATCH] cciss: add init of drv->cylinders back to cciss_geometry_inquiryMike Miller (OS Dev)
This patch adds initialization of drv->cylinders back into the failing case in cciss_geometry_inquiry. I inadvertently removed it in one my 2TB updates. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-14[PATCH] cciss endian annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06[PATCH] cciss: add struct pci_driver shutdown support (replaces reboot notifier)Mike Miller (OS Dev)
This patch adds support for the struct pci_driver shutdown method to cciss. We require notification of an impending reboot or shutdown so that we can flush the battery backed write cache (BBWC) on the Smart Array controller. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06[PATCH] cciss: fix for 2TB supportMike Miller (OS Dev)
This patch changes the way we determine if a logical volume is larger than 2TB. The original test looked for a total_size of 0. Originally we added 1 to the total_size. That would make our read_capacity return size 0 for >2TB lv's. We assumed that we could not have a lv size of 0 so it seemed OK until we were in a clustered system. The backup node would see a size of 0 due to the reservation on the drive. That caused the driver to switch to 16-byte CDB's which are not supported on older controllers. After that everything was broken. It may seem petty but I don't see the value in trying to determine if the LBA is beyond the 2TB boundary. That's why when we switch we use 16-byte CDB's for all read/write operations. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-30[PATCH] cciss: build with PROC_FS=nRandy Dunlap
RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the CONFIG_PROC_FS block. drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-18[PATCH] cciss: fix XFER_READ/XFER_WRITE in do_cciss_requestMike Miller
This patch fixes a stupid bug. Sometime during the 2tb enhancement I ended up replacing the macros XFER_READ and XFER_WRITE with h->cciss_read and h->cciss_write respectively. It seemed to work somehow at least on x86_64 and ia64. I don't know how. But people started complaining about command timeouts on older controllers like the 64xx series and only on ia32. This resolves the issue reproduced in our lab. Please consider this for inclusion. Thanks, mikem Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-18[PATCH] cciss: set default raid level when reading geometry failsMike Miller
This patch sets a default raid level on a volume that either does not support reading the geometry or reports an invalid geometry for whatever reason. We were always setting some values for heads and sectors but never set a raid level. This caused lots of problems on some buggy firmware. Please consider this for inclusion. Thanks, mikem Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-13Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Fixup cciss error handling [PATCH] Allow as-iosched to be unloaded [PATCH 2/2] cciss: remove calls to pci_disable_device [PATCH 1/2] cciss: map out more memory for config table [PATCH] Propagate down request sync flag Resolve trivial whitespace conflict in drivers/block/cciss.c manually.
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] cciss: remove calls to pci_disable_deviceMike Miller
Remove calls to pci_disable_device except in fail_all_cmds. The pci_disable_device function does something nasty to Smart Array controllers that pci_enable_device does not undo. So if the driver is unloaded it cannot be reloaded. Also, customers can disable any pci device via the ROM Based Setup Utility (RBSU). If the customer has disabled the controller we should not try to blindly enable the card from the driver. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] cciss: map out more memory for config tableMike Miller
Map out more memory for our config table. It's required to reach offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] Fixup cciss error handlingJens Axboe
The previous cciss commit removed the err_out_disable_pdev label, but there was still a user of that. Fix that up. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-13[PATCH 2/2] cciss: remove calls to pci_disable_devicemike.miller@hp.com
This patch removes calls to pci_disable_device except in fail_all_cmds. The pci_disable_device function does something nasty to Smart Array controllers that pci_enable_device does not undo. So if the driver is unloaded it cannot be reloaded. Also, customers can disable any pci device via the ROM Based Setup Utility (RBSU). If the customer has disabled the controller we should not try to blindly enable the card from the driver. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-13[PATCH 1/2] cciss: map out more memory for config tablemike.miller@hp.com
This patch maps out more memory for our config table. It's required to reach offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-08[PATCH] struct path: convert block_driversJosef Sipek
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] cciss: cleanup cciss_interrupt modeMike Miller
A pretty simple cleanup for cciss_interrupt_mode. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] cciss: add support for 1024 logical volumesMike Miller
Add the support for a large number of logical volumes. We will soon have hardware that support up to 1024 logical volumes. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] cciss: remove unused revalidate_allvol functionMike Miller
Remove the no longer used revalidate_allvol function. It was replaced by rebuild_lun_table. Signed-off-by: Mike Miller <mike.miller@hp.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 15:38:33 +0000