summaryrefslogtreecommitdiff
path: root/drivers/bcma/main.c
AgeCommit message (Collapse)Author
2015-01-29bcma: add early_init function for PCIe core and move some fix into itRafał Miłecki
There are some PCIe core fixes that need to be applied before accessing SPROM, otherwise reading it may fail. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29bcma: simplify freeing cores (internal devices structs)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23bcma: use standard bus scanning during early registerRafał Miłecki
Starting with kernel 3.19-rc1 early registration of bcma on MIPS is done a bit later, with memory allocator available. This allows us to simplify code by using standard bus scanning method. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23bcma: clean bus initialization codeRafał Miłecki
This moves main bus init code to the main.c and renames old function to make its purpose clear. Thanks to this change we'll also be able to separate scanning from registration (and support PCIe Gen 2 devices) in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-11-19Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-11bcma: get IRQ numbers from dtHauke Mehrtens
It is not possible to auto detect the irq numbers used by the cores on an arm SoC. If bcma was registered with device tree it will search for some device tree nodes with the irq number and add it to the core configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11bcma: make it possible to specify a IRQ num in bcma_core_irq()Hauke Mehrtens
This moves bcma_core_irq() to main.c and add a extra parameter with a number so that we can return different irq number for devices with more than one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27bcma: fill core details for every deviceRafał Miłecki
We were setting things like dma_dev, IRQ, etc. during core registration only. We need such info for cores handled internally (e.g. ChipCommon) as well. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-23bcma: fix build when CONFIG_OF_ADDRESS is not setHauke Mehrtens
Commit 2101e533f41a ("bcma: register bcma as device tree driver") introduces a hard dependency on OF_ADDRESS into the bcma driver. OF_ADDRESS is specifically disabled for the sparc architecture. This results in the following error when building sparc64:allmodconfig. drivers/bcma/main.c: In function 'bcma_of_find_child_device': drivers/bcma/main.c:150:3: error: implicit declaration of function 'of_translate_address' Fixes: 2101e533f41a ("bcma: register bcma as device tree driver") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30bcma: register bcma as device tree driverHauke Mehrtens
This driver is used by the bcm53xx ARM SoC code. Now it is possible to give the address of the chipcommon core in device tree and bcma will search for all the other cores. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09bcma: add support for chipcommon B coreHauke Mehrtens
This core is used on BCM4708 to configure the PCIe and USB3 PHYs and it contains the addresses to the Device Management unit. This will be used by the PCIe driver first. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09bcma: register NAND and QSPI cores earlyRafał Miłecki
On Northstar (ARM arch) we will use MTD subsystem to access NVRAM and SPROM. To get access to flash device we need to register these cores first. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09bcma: move code for core registration into separate functionRafał Miłecki
This cleans code a bit and will us to register cores in other places as well. The only difference with this patch is using "core_index" for setting device name. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09bcma: move bus struct setup into early part of host specific codeRafał Miłecki
This change is important for SoC host. In future we will want to know chip ID (needed for early MIPS boot) before doing cores scanning. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07bcma: add driver for PCIe Gen 2 coreRafał Miłecki
New Broadcom PCIe devices (802.11ac ones?) use Gen2 and have to be initialized differently. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-04bcma: export bcma_find_core_unit()Hauke Mehrtens
This function is used to get a specific core when there is more than one core of that specific type. This is used in bgmac to reset all GMAC cores. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19bcma: add missing put_device callLevente Kurusa
This is required so that we give up the last reference to the device. Signed-off-by: Levente Kurusa <levex@linux.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-16bcma: convert bus code to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the bcma bus code to use the correct field. Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22bcma: return correct error code when bus scan failedHauke Mehrtens
It is better to return the actual error code than just -1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27bcma: add support for BCM43142Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06bcma: ignore extra GMAC cores on BCM4706Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Synchronize with 'net' in order to sort out some l2tp, wireless, and ipv6 GRE fixes that will be built on top of in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-02-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-04bcma: unregister gpios before unloading bcmaHauke Mehrtens
This patch unregisters the gpio chip before bcma gets unloaded. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30bcma: register platform device for parallel flashRafał Miłecki
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-01-07bcma: make bcma_find_core_unit() accessibleHauke Mehrtens
This bcma_find_core_unit() is needed by the mips driver in the next patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-03Drivers: bcma: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: "Rafał Miłecki" <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
2012-12-06bcma: register watchdog driverHauke Mehrtens
Register the watchdog driver to the system if this is a SoC. Using the watchdog on a non SoC device, like a PCIe card, will make the PCIe card die when the timeout expired, but starting it again is not supported by bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21bcma: add GPIO driverHauke Mehrtens
Register a GPIO driver to access the GPIOs provided by the chip. The GPIOs of the SoC should always start at 0 and the other GPIOs could start at a random position. There is just one SoC in a system and when they start at 0 the number is predictable. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4587 Acked-by: Florian Fainelli <florian@openwrt.org>
2012-10-23Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c net/mac80211/mlme.c
2012-10-19bcma: add an extra pcie core structHauke Mehrtens
The BCM4706 has two PCIe host controller on the bcma bus. For PCIe client mode it is assumed that there is only one PCIe controller so the PCIe driver, like b43 and brcmsmac are accessing the first PCIe controller when they want to issue a operation on the host controller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19bcma: init sprom struct earlierHauke Mehrtens
The PCIe host driver and the chip common initialisation accesses the sprom struct, but it is not initialized when these functions are run. Move the sprom parsing up in to do it earlier. As we need the chip common core rev and some other attributes from the chip common core, the early initialization is done before accessing the sprom. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-19bcma: just do the necessary things in early register on SoCsHauke Mehrtens
Some parts of the initialization for chip common and the pcie core are accessing the sprom struct, but it is not initialized at that stage. Just do the necessary thing in the early register on SoCs and not the complete initialization to read out the nvram from the flash chip. After it is possible to read out the nvram, the sprom should be parsed from it and the full initialization of the cores should be run. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15bcma: fix unregistration of coresPiotr Haber
When cores are unregistered, entries need to be removed from cores list in a safe manner. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07bcma: don't leak memory for PCIE, MIPS, GBIT coresSaul St. John
bcma_scan_bus allocates a bcma_core for each core found on the bus, but the memory for cores handled by the bcma driver itself was not being freed when the bus was unregistered. This patch adds special handling for the PCIE, MIPS, and GBIT COMMON cores, to ensure that their memory allocation is freed as well. Note that this patch doesn't address the memory allocated for the CC core, as that was corrected in my previous patch "bcma: register cc core driver, device." Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Saul St. John <saul.stjohn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-21bcma: detect and register NAND flash deviceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-21bcma: detect and register serial flash deviceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-12bcma: add trivial GBIT MAC COMMON driverRafał Miłecki
GMAC COMMON core is present on BCM4706 and is used for example to access board PHYs (PHYs can not be accessed directly using GBIT MAC core). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-12bcma: support alternative (BCM4706) ChipCommon core idRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09bcma: use custom printing functionsRafał Miłecki
Having bus number printed makes it much easier to anaylze logs on systems with more buses. For example Netgear WNDR4500 has 3 AMBA buses in total, which makes standard log really messy. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05bcma: export bcma_find_coreHauke Mehrtens
This function is needed by the bcm47xx arch code to get the number of the ieee80211 core. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
2012-02-06bcma: add bus num counterHauke Mehrtens
If we have two bcma buses on one computer the second will not work without this patch. Now each bus gets an own number. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: make some functions __devinitHauke Mehrtens
bcma_core_pci_hostmode_init() has to be in __devinit as it will call a function in that section and so all functions calling it also have to be in __devinit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: don't fail for bad SPROM CRCHenrik Rydberg
The brcmsmac driver is now using the bcma SPROM CRC check, which does not recognize all chipsets that were functional prior to the switch. In particular, the current code bails out on odd CRC errors in recent Macbooks. This patch ignores those errors, with the argument that an unrecognized SPROM should be treated similarly to a non-existing one. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resumeLinus Torvalds
Now the low-level driver actually gets informed that it is getting suspended and resumed. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17bcma: add stub for bcma_bus_suspend()Linus Torvalds
.. and connect it up with the pci host bcma driver. Now, the next step is to connect those bcma bus-level suspend/resume functions to the actual bcma device suspend resume functions. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 09:52:05 +0000