summaryrefslogtreecommitdiff
path: root/drivers/base/platform.c
AgeCommit message (Collapse)Author
2012-12-11Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-11-27platform / ACPI: Attach/detach ACPI PM during probe/remove/shutdownRafael J. Wysocki
Drivers usually expect that the devices they are supposed to handle will be operational when their .probe() routines are called, but that need not be the case on some ACPI-based systems with ACPI-based device enumeration where the BIOSes don't put devices into D0 by default. To work around this problem it is sufficient to change bus type .probe() routines to ensure that devices will be powered on before the drivers' .probe() routines run (and their .remove() and .shutdown() routines accordingly). Modify platform_drv_probe() to run acpi_dev_pm_attach() for devices whose ACPI handles are present, so that ACPI power management is used to change their power states. Analogously, modify platform_drv_remove() and platform_drv_shutdown() to call acpi_dev_pm_detach() for those devices, so that they are not subject to ACPI PM any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2012-11-21ACPI / platform: Initialize ACPI handles of platform devices in advanceRafael J. Wysocki
The current platform device creation and registration code in acpi_create_platform_device() is quite convoluted. This function takes an ACPI device node as an argument and eventually calls platform_device_register_resndata() to create and register a platform device object on the basis of the information contained in that code. However, it doesn't associate the new platform device with the ACPI node directly, but instead it relies on acpi_platform_notify(), called from within device_add(), to find that ACPI node again with the help of acpi_platform_find_device() and acpi_platform_match() and then attach the new platform device to it. This causes an additional ACPI namespace walk to happen and is clearly suboptimal. Use the observation that it is now possible to initialize the ACPI handle of a device before calling device_add() for it to make this code more straightforward. Namely, add a new field to struct platform_device_info allowing us to pass the ACPI handle of interest to platform_device_register_full(), which will then use it to initialize the new device's ACPI handle before registering it. This will cause acpi_platform_notify() to use the ACPI handle from the device structure directly instead of using the .find_device() routine provided by the device's bus type. In consequence, acpi_platform_bus, acpi_platform_find_device(), and acpi_platform_match() are not necessary any more, so remove them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15driver: platform: fix documentation for platform_get_irq_bynameWolfram Sang
Probably due to copy&paste, some stuff was simply forgotten. Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15ACPI: Add support for platform bus typeMika Westerberg
With ACPI 5 it is now possible to enumerate traditional SoC peripherals, like serial bus controllers and slave devices behind them. These devices are typically based on IP-blocks used in many existing SoC platforms and platform drivers for them may already be present in the kernel tree. To make driver "porting" more straightforward, add ACPI support to the platform bus type. Instead of writing ACPI "glue" drivers for the existing platform drivers, register the platform bus type with ACPI to create platform device objects for the drivers and bind the corresponding ACPI handles to those platform devices. This should allow us to reuse the existing platform drivers for the devices in question with the minimum amount of modifications. This changeset is based on Mika Westerberg's and Mathias Nyman's work. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-14Merge 3.7-rc5 into driver-core-nextGreg Kroah-Hartman
2012-11-09sparc: Add sparc support for platform_get_irq()Andreas Larsson
This adds sparc support for platform_get_irq that in the normal case use platform_get_resource() to get an irq. This standard approach fails for sparc as there are no resources of type IORESOURCE_IRQ for irqs for sparc. Cross platform drivers can then use this standard platform function and work on sparc instead of having to have a special case for sparc. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-30drivers/base: fix typo in comment for arch_setup_pdev_archdata()Sebastian Andrzej Siewior
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02Merge tag 'pm-for-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael J Wysocki: - Improved system suspend/resume and runtime PM handling for the SH TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile). - Generic PM domains framework extensions related to cpuidle support and domain objects lookup using names. - ARM/shmobile power management updates including improved support for the SH7372's A4S power domain containing the CPU core. - cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre Przywara and Borislav Petkov. - cpu0 cpufreq driver from Shawn Guo. - cpufreq governor fixes related to the relaxing of limit from Michal Pecio. - OMAP cpufreq updates from Axel Lin and Richard Zhao. - cpuidle ladder governor fixes related to the disabling of states from Carsten Emde and me. - Runtime PM core updates related to the interactions with the system suspend core from Alan Stern and Kevin Hilman. - Wakeup sources modification allowing more helper functions to be called from interrupt context from John Stultz and additional diagnostic code from Todd Poynor. - System suspend error code path fix from Feng Hong. Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the workqueue fixes conflicting fairly badly with the removal of support for hardware P-state chips. The changes were independent but somewhat intertwined. * tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code" PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 cpuidle: rename function name "__cpuidle_register_driver", v2 cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name cpuidle: remove some empty lines PM: Prevent runtime suspend during system resume PM QoS: Use spinlock in the per-device PM QoS constraints code PM / Sleep: use resume event when call dpm_resume_early cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure ACPI / processor: remove pointless variable initialization ACPI / processor: remove unused function parameter cpufreq: OMAP: remove loops_per_jiffy recalculate for smp sections: fix section conflicts in drivers/cpufreq cpufreq: conservative: update frequency when limits are relaxed cpufreq / ondemand: update frequency when limits are relaxed properly __init-annotate pm_sysrq_init() cpufreq: Add a generic cpufreq-cpu0 driver PM / OPP: Initialize OPP table from device tree ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp cpufreq: Remove support for hardware P-state chips from powernow-k8 ...
2012-09-06driver core: Check if r->name is valid in platform_get_resource_byname()Peter Ujfalusi
Safety check for the validity of the resource name before calling strcmp(). If the resource name is NULL do not compare it, just skip it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-04PM / Runtime: Allow helpers to be called by early platform driversRafael J. Wysocki
Runtime PM helper functions, like pm_runtime_get_sync(), cannot be called by early platform device drivers, because the devices' power management locks are not initialized at that time. This is quite inconvenient, so modify early_platform_add_devices() to initialize the devices power management locks as appropriate and make sure that they won't be initialized more than once if an early platform device is going to be used as a regular one later. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-16platform: Add support for automatic device IDsJean Delvare
Right now we have support for explicit platform device IDs, as well as ID-less platform devices when a given device type can only have one instance. However there are cases where multiple instances of a device type can exist, and their IDs aren't (and can't be) known in advance and do not matter. In that case we need automatic device IDs to avoid device name collisions. I am using magic ID value -2 (PLATFORM_DEVID_AUTO) for this, similar to -1 for ID-less devices. The automatically allocated device IDs are global (to avoid an additional per-driver cost.) We keep note that the ID was automatically allocated so that it can be freed later. Note that we also restore the ID to PLATFORM_DEVID_AUTO on error and device deletion, to avoid avoid unexpected behavior on retry. I don't really expect retries on platform device addition, but better safe than sorry. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-01drivercore: Output common devicetree information in ueventGrant Likely
When userspace needs to find a specific device, it currently isn't easy to resolve a /sys/devices/ path from a specific device tree node. Nor is it easy to obtain the compatible list for devices. This patch generalizes the code that inserts OF_* values into the uevent device attribute so that any device that is attached to an OF node will have that information exported to userspace. Without this patch only platform devices and some powerpc-specific busses have access to this data. The original function also creates a MODALIAS property for the compatible list, but that code has not been generalized into the common case because it has the potential to break module loading on a lot of bus types. Bus types are still responsible for their own MODALIAS properties. Boot tested on ARM and compile tested on PowerPC and SPARC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Frederic Lambert <frdrc66@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Mark Brown <broonie@sirena.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2011-12-21PM / Sleep: Remove forward-only callbacks from platform bus typeRafael J. Wysocki
The forward-only PM callbacks provided by the platform bus type are not necessary any more, because the PM core executes driver callbacks when the corresponding subsystem callbacks are not present, so drop them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-09drivers_base: make argument to platform_device_register_full constUwe Kleine-König
platform_device_register_full doesn't modify *pdevinfo so it can be marked as const without further adaptions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-25Merge branch 'driver-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits) mm: memory hotplug: Check if pages are correctly reserved on a per-section basis Revert "memory hotplug: Correct page reservation checking" Update email address for stable patch submission dynamic_debug: fix undefined reference to `__netdev_printk' dynamic_debug: use a single printk() to emit messages dynamic_debug: remove num_enabled accounting dynamic_debug: consolidate repetitive struct _ddebug descriptor definitions uio: Support physical addresses >32 bits on 32-bit systems sysfs: add unsigned long cast to prevent compile warning drivers: base: print rejected matches with DEBUG_DRIVER memory hotplug: Correct page reservation checking memory hotplug: Refuse to add unaligned memory regions remove the messy code file Documentation/zh_CN/SubmitChecklist ARM: mxc: convert device creation to use platform_device_register_full new helper to create platform devices with dma mask docs/driver-model: Update device class docs docs/driver-model: Document device.groups kobj_uevent: Ignore if some listeners cannot handle message dynamic_debug: make netif_dbg() call __netdev_printk() dynamic_debug: make netdev_dbg() call __netdev_printk() ...
2011-08-26new helper to create platform devices with dma maskUwe Kleine-König
compared to the most powerful and already existing helper (namely platform_device_register_resndata) this allows to specify a dma_mask. To make eventual extensions later more easy, a struct holding the used information is created instead of passing the information by function parameters. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22drivers_base: platform: use always ->name for ueventSebastian Andrzej Siewior
If id_entry is available then it is used. However if we remove first the driver followed by the device, then the id_entry is pointing to driver's memory which is long gone. Since id->name and plat->name are equal there is no point in distinguishing them. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-kernel@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08driver core: fix kernel-doc warning in platform.cRandy Dunlap
Warning(drivers/base/platform.c:50): No description found for parameter 'pdev' Warning(drivers/base/platform.c:50): Excess function parameter 'dev' description in 'arch_setup_pdev_archdata' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-08driver core: Add ability for arch code to setup pdev_archdataKumar Gala
On some architectures we need to setup pdev_archdata before we add the device. Waiting til a bus_notifier is too late since we might need the pdev_archdata in the bus notifier. One example is setting up of dma_mask pointers such that it can be used in a bus_notifier. We add weak noop version of arch_setup_pdev_archdata() and allow the arch code to override with access the full definitions of struct device, struct platform_device, and struct pdev_archdata. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-07drivers/base/platform.c: don't mark platform_device_register_resndata() as ↵Andrew Morton
__init_or_module This reverts 737a3bb9416ce2a7c7a4 ("Driver core: move platform device creation helpers to .init.text (if MODULE=n)"). That patch assumed that platform_device_register_resndata() is only ever called from __init code but that isn't true in the case ioctl->drm_ioctl->radeon_cp_init(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=35192 Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Anthony Basile <blueness@gentoo.org> Cc: Greg KH <gregkh@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-19Merge branch 'driver-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (44 commits) debugfs: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning sysfs: remove "last sysfs file:" line from the oops messages drivers/base/memory.c: fix warning due to "memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION" memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION SYSFS: Fix erroneous comments for sysfs_update_group(). driver core: remove the driver-model structures from the documentation driver core: Add the device driver-model structures to kerneldoc Translated Documentation/email-clients.txt RAW driver: Remove call to kobject_put(). reboot: disable usermodehelper to prevent fs access efivars: prevent oops on unload when efi is not enabled Allow setting of number of raw devices as a module parameter Introduce CONFIG_GOOGLE_FIRMWARE driver: Google Memory Console driver: Google EFI SMI x86: Better comments for get_bios_ebda() x86: get_bios_ebda_length() misc: fix ti-st build issues params.c: Use new strtobool function to process boolean inputs debugfs: move to new strtobool ... Fix up trivial conflicts in fs/debugfs/file.c due to the same patch being applied twice, and an unrelated cleanup nearby.
2011-05-16PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"Kevin Hilman
The platform_bus_set_pm_ops() operation is deprecated in favor of the new device power domain infrastructre implemented in commit 7538e3db6e015e890825fbd9f8659952896ddd5b (PM: add support for device power domains) Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-29PM / Platform: Use generic runtime PM callbacks directlyRafael J. Wysocki
Once shmobile platforms have been converted to using power domains for overriding the platform bus type's PM callbacks, it isn't necessary to use the __weakly defined wrappers around the generinc runtime PM callbacks in the platform bus type any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-29PM: Export platform bus type's default PM callbacksRafael J. Wysocki
Export the default PM callbacks defined for the platform bus type so that they can be used by power domains for suspending and resuming platform devices in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-22driver core/platform_device_add_resources: free resource before overwritingUwe Kleine-König
Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver core/platform_device_add_resources: set resource to NULL if !resUwe Kleine-König
This makes the res = NULL case more consistant to the res != NULL case as now both overwrite pdev->resource. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver core/platform_device_add_data: free platform data before overwritingUwe Kleine-König
Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22driver core/platform_device_add_data: set platform_data to NULL if !dataUwe Kleine-König
This makes the data = NULL case more consistent to the data != NULL case. The functional change is that now platform_device_add_data(somepdev, NULL, somesize) sets pdev->dev.platform_data to NULL instead of not touching it. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: fix XEN_SAVE_RESTORE Kconfig dependencies PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS
2011-04-12mfd: Fetch cell pointer from platform_device->mfd_cellSamuel Ortiz
In order for MFD drivers to fetch their cell pointer but also their platform data one, an mfd cell pointer is added to the platform_device structure. That allows all MFD sub devices drivers to be MFD agnostic, unless they really need to access their MFD cell data. Most of them don't, especially the ones for IPs used by both MFD and non MFD SoCs. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg KH <gregkh@suse.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-04-11PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKSRafael J. Wysocki
Xen save/restore is going to use hibernate device callbacks for quiescing devices and putting them back to normal operations and it would need to select CONFIG_HIBERNATION for this purpose. However, that also would cause the hibernate interfaces for user space to be enabled, which might confuse user space, because the Xen kernels don't support hibernation. Moreover, it would be wasteful, as it would make the Xen kernels include a substantial amount of code that they would never use. To address this issue introduce new power management Kconfig option CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code that is necessary for the hibernate device callbacks to work and make CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to select CONFIG_HIBERNATE_CALLBACKS without dragging the entire hibernate code along with it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
2010-10-25Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mtd/m25p80: add support to parse the partitions by OF node of/irq: of_irq.c needs to include linux/irq.h of/mips: Cleanup some include directives/files. of/mips: Add device tree support to MIPS of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch of/device: Rework to use common platform_device_alloc() for allocating devices of/xsysace: Fix OF probing on little-endian systems of: use __be32 types for big-endian device tree data of/irq: remove references to NO_IRQ in drivers/of/platform.c of/promtree: add package-to-path support to pdt of/promtree: add of_pdt namespace to pdt code of/promtree: no longer call prom_ functions directly; use an ops structure of/promtree: make drivers/of/pdt.c no longer sparc-only sparc: break out some PROM device-tree building code out into drivers/of of/sparc: convert various prom_* functions to use phandle sparc: stop exporting openprom.h header powerpc, of_serial: Endianness issues setting up the serial ports of: MTD: Fix OF probing on little-endian systems of: GPIO: Fix OF probing on little-endian systems
2010-10-22base/platform: Simplifications for NULL platform data/resources handlingAnton Vorontsov
There's no need to explicitly check for data and resources being NULL, as platform_device_add_{data,resources}() do this internally nowadays. This makes the code more linear and less indented. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22base/platform: Safe handling for NULL platform data and resourcesAnton Vorontsov
Some users of platform_device_add_{data,resources}() assume that NULL data and resources will be handled specially, i.e. just ignored. But the platform core ends up calling kmemdup(NULL, 0, ...), which returns a non-NULL result (i.e. ZERO_SIZE_PTR), which causes drivers to oops on a valid code, something like: if (platform_data) stuff = platform_data->stuff; This patch makes the platform core a bit more safe for such cases. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22driver core: platform_bus: allow runtime override of dev_pm_opsKevin Hilman
Currently, the platform_bus allows customization of several of the busses dev_pm_ops methods by using weak symbols so that platform code can override them. The weak-symbol approach is not scalable when wanting to support multiple platforms in a single kernel binary. Instead, provide __init methods for platform code to customize the dev_pm_ops methods at runtime. NOTE: after these dynamic methods are merged, the weak symbols should be removed from drivers/base/platform.c. AFAIK, this will only affect SH and sh-mobile which should be converted to use this runtime approach instead of the weak symbols. After SH & sh-mobile are converted, the weak symobols could be removed. Tested on OMAP3. Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22driver core: platform: Use drv->driver.bus instead of assuming platform_bus_typePatrick Pannuto
In theory (although not *yet* in practice), a driver being passed to platform_driver_probe might have driver.bus set to something other than platform_bus_type. Locking drv->driver.bus is always correct. Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-21of/device: Rework to use common platform_device_alloc() for allocating devicesGrant Likely
The current code allocates and manages platform_devices created from the device tree manually. It also uses an unsafe shortcut for allocating the platform_device and the resource table at the same time. (which I added in the last rework; sorry). This patch refactors the code to use platform_device_alloc() for allocating new devices. This reduces the amount of custom code implemented by of_platform, eliminates the unsafe alloc trick, and has the side benefit of letting the platform_bus code manage freeing the device data and resources when the device is freed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Simek <monstr@monstr.eu>
2010-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (28 commits) driver core: device_rename's new_name can be const sysfs: Remove owner field from sysfs struct attribute powerpc/pci: Remove owner field from attribute initialization in PCI bridge init regulator: Remove owner field from attribute initialization in regulator core driver leds: Remove owner field from attribute initialization in bd2802 driver scsi: Remove owner field from attribute initialization in ARCMSR driver scsi: Remove owner field from attribute initialization in LPFC driver cgroupfs: create /sys/fs/cgroup to mount cgroupfs on Driver core: Add BUS_NOTIFY_BIND_DRIVER driver core: fix memory leak on one error path in bus_register() debugfs: no longer needs to depend on SYSFS sysfs: Fix one more signature discrepancy between sysfs implementation and docs. sysfs: fix discrepancies between implementation and documentation dcdbas: remove a redundant smi_data_buf_free in dcdbas_exit dmi-id: fix a memory leak in dmi_id_init error path sysfs: sysfs_chmod_file's attr can be const firmware: Update hotplug script Driver core: move platform device creation helpers to .init.text (if MODULE=n) Driver core: reduce duplicated code for platform_device creation Driver core: use kmemdup in platform_device_add_resources ...
2010-08-05Driver core: move platform device creation helpers to .init.text (if MODULE=n)Uwe Kleine-König
Platform devices should only be called by init code, so it should be possible to move creation helpers to .init.text -- at least if modules are disabled. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05Driver core: reduce duplicated code for platform_device creationUwe Kleine-König
This makes the two similar functions platform_device_register_simple and platform_device_register_data one line inline functions using a new generic function platform_device_register_resndata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05Driver core: use kmemdup in platform_device_add_resourcesUwe Kleine-König
This makes platform_device_add_resources look like platform_device_add_data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-24of: Merge of_platform_bus_type with platform_bus_typeGrant Likely
of_platform_bus was being used in the same manner as the platform_bus. The only difference being that of_platform_bus devices are generated from data in the device tree, and platform_bus devices are usually statically allocated in platform code. Having them separate causes the problem of device drivers having to be registered twice if it was possible for the same device to appear on either bus. This patch removes of_platform_bus_type and registers all of_platform bus devices and drivers on the platform bus instead. A previous patch made the of_device structure an alias for the platform_device structure, and a shim is used to adapt of_platform_drivers to the platform bus. After all of of_platform_bus drivers are converted to be normal platform drivers, the shim code can be removed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24drivercore/of: Add OF style matching to platform busGrant Likely
As part of the merge between platform bus and of_platform bus, add the ability to do of-style matching to the platform bus. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> CC: Michal Simek <monstr@monstr.eu> CC: Grant Likely <grant.likely@secretlab.ca> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: linux-kernel@vger.kernel.org CC: microblaze-uclinux@itee.uq.edu.au CC: linuxppc-dev@ozlabs.org CC: devicetree-discuss@lists.ozlabs.org
2010-05-21platform_bus: allow custom extensions to system PM methodsKevin Hilman
When runtime PM for platform_bus was added, it allowed for platforms to customize the runtime PM methods since they are defined as weak symbols. This patch allows platforms to also extend the system PM methods with custom hooks so runtime PM and system PM extensions can be managed together by custom platform-specific code. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Magnus Damm <damm@opensource.se> Cc: Rafael Wysocki <rjw@sisk.pl> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: PM QOS update fix Freezer / cgroup freezer: Update stale locking comments PM / platform_bus: Allow runtime PM by default i2c: Fix bus-level power management callbacks PM QOS update PM / Hibernate: Fix block_io.c printk warning PM / Hibernate: Group swap ops PM / Hibernate: Move the first_sector out of swsusp_write PM / Hibernate: Separate block_io PM / Hibernate: Snapshot cleanup FS / libfs: Implement simple_write_to_buffer PM / Hibernate: document open(/dev/snapshot) side effects PM / Runtime: Add sysfs debug files PM: Improve device power management document PM: Update device power management document PM: Allow runtime_suspend methods to call pm_schedule_suspend() PM: pm_wakeup - switch to using bool
2010-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (127 commits) sh: update defconfigs. sh: Fix up the NUMA build for recent LMB changes. sh64: provide a stub per_cpu_trap_init() definition. sh: fix up CONFIG_KEXEC=n build. sh: fixup the docbook paths for clock framework shuffling. driver core: Early dev_name() depends on slab_is_available(). sh: simplify WARN usage in SH clock driver sh: Check return value of clk_get on ms7724 sh: Check return value of clk_get on ecovec24 sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c sh: move sh clock.c contents to drivers/sh/clk. sh: move sh asm/clock.h contents to linux/sh_clk.h V2 sh: remove unused clock lookup sh: switch boards to clkdev sh: switch sh4-202 to clkdev sh: switch shx3 to clkdev sh: switch sh7757 to clkdev sh: switch sh7763 to clkdev sh: switch sh7780 to clkdev sh: switch sh7786 to clkdev ...
2010-05-17platform: Make platform resource input parameters constGeert Uytterhoeven
Make the platform resource input parameters of platform_device_add_resources() and platform_device_register_simple() const, as the resources are copied and never modified. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-13Merge branch 'sh/driver-core'Paul Mundt