summaryrefslogtreecommitdiff
path: root/drivers/base/platform.c
AgeCommit message (Collapse)Author
2021-06-04drivers/base: Constify static attribute_group structsRikard Falkeborn
These are only used by putting their address in an array of pointers to const struct attribute_group (either directly or via the __ATTRIBUTE_GROUP macro). Make them const to allow the compiler to place them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20210528213408.20067-1-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27driver core: Drop helper devm_platform_ioremap_resource_wc()Uwe Kleine-König
Since the macro was introduced in 2019 (commit bb6243b4f73d ("drivers: platform: provide devm_platform_ioremap_resource_wc()") there is only a single user which hardly justifies the function for the small task it provides. So drop the helper and open-code it in the only user. Adapt the non-wc case accordingly. For a all-mod-config build on amd64 this change introduces the following changes according to bloat-o-meter: add/remove: 0/1 grow/shrink: 1/0 up/down: 20/-252 (-232) Function old new delta devm_platform_ioremap_resource_wc 252 - -252 sram_probe 796 816 +20 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210525103711.956438-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07Revert "driver core: platform: Make platform_get_irq_optional() optional"Greg Kroah-Hartman
This reverts commit ed7027fdf4ec41ed6df6814956dc11860232a9d5 as it causes runtime issues: https://lore.kernel.org/r/20210406192514.GA34677@roeck-us.net Link: https://lore.kernel.org/r/20210406192514.GA34677@roeck-us.net Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02driver core: platform: Make platform_get_irq_optional() optionalAndy Shevchenko
Currently the platform_get_irq_optional() returns an error code even if IRQ resource sumply has not been found. It prevents caller to be error code agnostic in their error handling. Now: ret = platform_get_irq_optional(...); if (ret != -ENXIO) return ret; // respect deferred probe if (ret > 0) ...we get an IRQ... After proposed change: ret = platform_get_irq_optional(...); if (ret < 0) return ret; if (ret > 0) ...we get an IRQ... Reported-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210331144526.19439-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02driver core: platform: Make clear error code used for missed IRQAndy Shevchenko
We have few code paths where same error code is assigned and returned for missed IRQ. Unify that under single error path. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210331145937.35980-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-24Merge tag 'driver-core-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / debugfs update from Greg KH: "Here is the "big" driver core and debugfs update for 5.12-rc1 This set of driver core patches caused a bunch of problems in linux-next for the past few weeks, when Saravana tried to set fw_devlink=on as the default functionality. This caused a number of systems to stop booting, and lots of bugs were fixed in this area for almost all of the reported systems, but this option is not ready to be turned on just yet for the default operation based on this testing, so I've reverted that change at the very end so we don't have to worry about regressions in 5.12 We will try to turn this on for 5.13 if testing goes better over the next few months. Other than the fixes caused by the fw_devlink testing in here, there's not much more: - debugfs fixes for invalid input into debugfs_lookup() - kerneldoc cleanups - warn message if platform drivers return an error on their remove callback (a futile effort, but good to catch). All of these have been in linux-next for a while now, and the regressions have gone away with the revert of the fw_devlink change" * tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits) Revert "driver core: Set fw_devlink=on by default" of: property: fw_devlink: Ignore interrupts property for some configs debugfs: do not attempt to create a new file before the filesystem is initalized debugfs: be more robust at handling improper input in debugfs_lookup() driver core: auxiliary bus: Fix calling stage for auxiliary bus init of: irq: Fix the return value for of_irq_parse_one() stub of: irq: make a stub for of_irq_parse_one() clk: Mark fwnodes when their clock provider is added/removed PM: domains: Mark fwnodes when their powerdomain is added/removed irqdomain: Mark fwnodes when their irqdomain is added/removed driver core: fw_devlink: Handle suppliers that don't use driver core of: property: Add fw_devlink support for optional properties driver core: Add fw_devlink.strict kernel param of: property: Don't add links to absent suppliers driver core: fw_devlink: Detect supplier devices that will never be added driver core: platform: Emit a warning if a remove callback returned non-zero of: property: Fix fw_devlink handling of interrupts/interrupts-extended gpiolib: Don't probe gpio_device if it's not the primary device device.h: Remove bogus "the" in kerneldoc gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default ...
2021-02-22Merge tag 'devicetree-for-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions * tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) driver core: platform: Drop of_device_node_put() wrapper of: Remove of_dev_{get,put}() dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt dt-bindings: can: rcar_canfd: Group tuples in pin control properties dt-bindings: power: renesas,apmu: Group tuples in cpus properties dt-bindings: mtd: spi-nor: Convert to DT schema format dt-bindings: Use portable sort for version cmp dt-bindings: ethernet-controller: fix fixed-link specification dt-bindings: irqchip: Add node name to PRUSS INTC dt-bindings: interconnect: Fix the expected number of cells dt-bindings: Fix errors in 'if' schemas dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required dt-bindings: Fix undocumented compatible strings in examples kbuild: Add support to build overlays (%.dtbo) scripts: dtc: Remove the unused fdtdump.c file scripts: dtc: Build fdtoverlay tool scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9 scripts: dtc: Fetch fdtoverlay.c from external DTC project dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings dt-bindings: iio: dac: Fix AD5686 references ...
2021-02-12driver core: platform: Drop of_device_node_put() wrapperRob Herring
of_device_node_put() is just a wrapper for of_node_put(). The platform driver core is already polluted with of_node pointers and the only 'get' already uses of_node_get() (though typically the get would happen in of_device_alloc()). Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210211232745.1498137-3-robh@kernel.org
2021-02-09driver core: platform: Emit a warning if a remove callback returned non-zeroUwe Kleine-König
The driver core ignores the return value of a bus' remove callback. However a driver returning an error code is a hint that there is a problem, probably a driver author who expects that returning e.g. -EBUSY has any effect. The right thing to do would be to make struct platform_driver::remove() return void. With the immense number of platform drivers this is however a big quest and I hope to prevent at least a few new drivers that return an error code here. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210207211537.19992-1-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12Merge tag 'irqchip-fixes-5.11-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix the MIPS CPU interrupt controller hierarchy - Simplify the PRUSS Kconfig entry - Eliminate trivial build warnings on the MIPS Loongson liointc - Fix error path in devm_platform_get_irqs_affinity() - Turn the BCM2836 IPI irq_eoi callback into irq_ack - Fix initialisation of on-stack msi_alloc_info - Cleanup spurious comma in irq-sl28cpld Link: https://lore.kernel.org/r/20210110110001.2328708-1-maz@kernel.org
2020-12-22driver core: platform: Add extra error check in ↵John Garry
devm_platform_get_irqs_affinity() The current check of nvec < minvec for nvec returned from platform_irq_count() will not detect a negative error code in nvec. This is because minvec is unsigned, and, as such, nvec is promoted to unsigned in that check, which will make it a huge number (if it contained -EPROBE_DEFER). In practice, an error should not occur in nvec for the only in-tree user, but add a check anyway. Fixes: e15f2fa959f2 ("driver core: platform: Add devm_platform_get_irqs_affinity()") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1608561055-231244-1-git-send-email-john.garry@huawei.com
2020-12-15Merge tag 'irq-core-2020-12-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Generic interrupt and irqchips subsystem updates. Unusually, there is not a single completely new irq chip driver, just new DT bindings and extensions of existing drivers to accomodate new variants! Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups" * tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling driver core: platform: Add devm_platform_get_irqs_affinity() ACPI: Drop acpi_dev_irqresource_disabled() resource: Add irqresource_disabled() genirq/affinity: Add irq_update_affinity_desc() irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device platform-msi: Track shared domain allocation irqchip/ti-sci-intr: Fix freeing of irqs irqchip/ti-sci-inta: Fix printing of inta id on probe success drivers/irqchip: Remove EZChip NPS interrupt controller Revert "genirq: Add fasteoi IPI flow" irqchip/hip04: Make IPIs use handle_percpu_devid_irq() irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq() irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq() irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq() irqchip/ocelot: Add support for Jaguar2 platforms irqchip/ocelot: Add support for Serval platforms irqchip/ocelot: Add support for Luton platforms irqchip/ocelot: prepare to support more SoC ...
2020-12-13driver core: platform: don't oops in platform_shutdown() on unbound devicesDmitry Baryshkov
On shutdown the driver core calls the bus' shutdown callback also for unbound devices. A driver's shutdown callback however is only called for devices bound to this driver. Commit 9c30921fe799 ("driver core: platform: use bus_type functions") changed the platform bus from driver callbacks to bus callbacks, so the shutdown function must be prepared to be called without a driver. Add the corresponding check in the shutdown function. Fixes: 9c30921fe799 ("driver core: platform: use bus_type functions") Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201212235533.247537-1-dmitry.baryshkov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11driver core: platform: Add devm_platform_get_irqs_affinity()John Garry
Drivers for multi-queue platform devices may also want managed interrupts for handling HW queue completion interrupts, so add support. The function accepts an affinity descriptor pointer, which covers all IRQs expected for the device. The function is devm class as the only current in-tree user will also use devm method for requesting the interrupts; as such, the function is made as devm as it can ensure ordering of freeing the irq and disposing of the mapping. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1606905417-183214-5-git-send-email-john.garry@huawei.com
2020-12-10driver core: platform: Introduce platform_get_mem_or_io()Andy Shevchenko
There are at least few existing users of the proposed API which retrieves either MEM or IO resource from platform device. Make it common to utilize in the existing and new users. Cc: Eric Auger <eric.auger@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: Peng Hao <peng.hao2@zte.com.cn> Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20201209203642.27648-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: platform: use bus_type functionsUwe Kleine-König
This works towards the goal mentioned in 2006 in commit 594c8281f905 ("[PATCH] Add bus_type probe, remove, shutdown methods."). The functions are moved to where the other bus_type functions are defined and renamed to match the already established naming scheme. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201119124611.2573057-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: platform: change logic implementing platform_driver_probeUwe Kleine-König
Instead of overwriting the core driver's probe function handle probing devices for drivers loaded by platform_driver_probe() in the platform driver probe function. The intended goal is to not have to change the probe function to simplify converting the platform bus to use bus functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201119124611.2573057-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: platform: reorder functionsUwe Kleine-König
This way all callbacks and structures used to initialize platform_bus_type are defined just before platform_bus_type and in the same order. Also move platform_drv_probe_fail just before it's only user. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201119124611.2573057-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Miscellaneous changes for sysfs_emitJoe Perches
Change additional instances that could use sysfs_emit and sysfs_emit_at that the coccinelle script could not convert. o macros creating show functions with ## concatenation o unbound sprintf uses with buf+len for start of output to sysfs_emit_at o returns with ?: tests and sprintf to sysfs_emit o sysfs output with struct class * not struct device * arguments Miscellanea: o remove unnecessary initializations around these changes o consistently use int len for return length of show functions o use octal permissions and not S_<FOO> o rename a few show function names so DEVICE_ATTR_<FOO> can be used o use DEVICE_ATTR_ADMIN_RO where appropriate o consistently use const char *output for strings o checkpatch/style neatening Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8bc24444fe2049a9b2de6127389b57edfdfe324d.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functionsJoe Perches
Convert the various sprintf fmaily calls in sysfs device show functions to sysfs_emit and sysfs_emit_at for PAGE_SIZE buffer safety. Done with: $ spatch -sp-file sysfs_emit_dev.cocci --in-place --max-width=80 . And cocci script: $ cat sysfs_emit_dev.cocci @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - sprintf(buf, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - strcpy(buf, chr); + sysfs_emit(buf, chr); ...> } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - sprintf(buf, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... - len += scnprintf(buf + len, PAGE_SIZE - len, + len += sysfs_emit_at(buf, len, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { ... - strcpy(buf, chr); - return strlen(buf); + return sysfs_emit(buf, chr); } Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/3d033c33056d88bbe34d4ddb62afd05ee166ab9a.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-10platform_device: switch to simpler IDA interfaceBartosz Golaszewski
We don't need to specify any ranges when allocating IDs so we can switch to ida_alloc() and ida_free() instead of the ida_simple_ counterparts. ida_simple_get(ida, 0, 0, gfp) is equivalent to ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID larger than INT_MAX. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200909180248.10093-1-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-10driver core: platform: Document return type of more functionsStephen Boyd
I can't always remember the return values of these functions, and so I usually jump to the function to read the kernel-doc and see that it doesn't tell me. Then I have to spend more time reading the code to jump to the function that actually tells me the return values. Let's document it here so that we don't all have to spend time digging through the code to understand the return values. Cc: <linux-doc@vger.kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200910060440.2302925-1-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-10driver core: platform: expose numa_node to users in sysfsBarry Song
Some platform devices like ARM SMMU are memory-mapped and populated by ACPI/IORT. In this case, NUMA topology of those platform devices are exported by firmware as well. Software might care about the numa_node of those devices in order to achieve NUMA locality. This patch will show the numa_node for this kind of devices in sysfs. For those platform devices without numa, numa_node won't be visible. Cc: Prime Zeng <prime.zeng@hisilicon.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20200619030045.81956-1-song.bao.hua@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-07driver core: platform: need consistent spacing around '-'Barry Song
Fix the below checkpatch issue: ERROR: need consistent spacing around '-' (ctx:WxV) FILE: drivers/base/platform.c:1008: + len = acpi_device_modalias(dev, buf, PAGE_SIZE -1); ^ Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20200602045556.66948-1-song.bao.hua@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-07Merge tag 'driver-core-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core patches for 5.8-rc1. Not all that huge this release, just a number of small fixes and updates: - software node fixes - kobject now sends KOBJ_REMOVE when it is removed from sysfs, not when it is removed from memory (which could come much later) - device link additions and fixes based on testing on more devices - firmware core cleanups - other minor changes, full details in the shortlog All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits) driver core: Update device link status correctly for SYNC_STATE_ONLY links firmware_loader: change enum fw_opt to u32 software node: implement software_node_unregister() kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs driver core: Remove unnecessary is_fwnode_dev variable in device_add() drivers property: When no children in primary, try secondary driver core: platform: Fix spelling errors in platform.c driver core: Remove check in driver_deferred_probe_force_trigger() of: platform: Batch fwnode parsing when adding all top level devices driver core: fw_devlink: Add support for batching fwnode parsing driver core: Look for waiting consumers only for a fwnode's primary device driver core: Move code to the right part of the file Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default"" drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish firmware_loader: move fw_fallback_config to a private kernel symbol namespace driver core: Add missing '\n' in log messages driver/base/soc: Use kobj_to_dev() API Add documentation on meaning of -EPROBE_DEFER driver core: platform: remove redundant assignment to variable ret debugfs: Use the correct style for SPDX License Identifier ...
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-01Merge tag 'docs-5.8' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ...
2020-05-21driver core: platform: Fix spelling errors in platform.cTang Bin
There is a word spelling mistake of 'Unegisters', thus it should be fixed. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200520141202.19568-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-12driver core: platform: Clarify that IRQ 0 is invalidBjorn Helgaas
These interfaces return a negative error number or an IRQ: platform_get_irq() platform_get_irq_optional() platform_get_irq_byname() platform_get_irq_byname_optional() The function comments suggest checking for error like this: irq = platform_get_irq(...); if (irq < 0) return irq; which is what most callers (~900 of 1400) do, so it's implicit that IRQ 0 is invalid. But some callers check for "irq <= 0", and it's not obvious from the source that we never return an IRQ 0. Make this more explicit by updating the comments to say that an IRQ number is always non-zero and adding a WARN() if we ever do return zero. If we do return IRQ 0, it likely indicates a bug in the arch-specific parts of platform_get_irq(). Relevant prior discussion at [1, 2]. [1] https://lore.kernel.org/r/Pine.LNX.4.64.0701250940220.25027@woody.linux-foundation.org/ [2] https://lore.kernel.org/r/Pine.LNX.4.64.0701252029570.25027@woody.linux-foundation.org/ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-11Merge v5.7-rc5 into driver-core-nextGreg Kroah-Hartman
We want the driver core fixes in here and this resolves a merge issue with drivers/base/dd.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a ↵Kuppuswamy Sathyanarayanan
driver developer is foolish If platform bus driver registration is failed then, accessing platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock) in __platform_driver_probe() without verifying the return value __platform_driver_register() can lead to NULL pointer exception. So check the return value before attempting the spin lock. One such example is below: For a custom usecase, I have intentionally failed the platform bus registration and I expected all the platform device/driver registrations to fail gracefully. But I came across this panic issue. [ 1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 1.331118] #PF: supervisor write access in kernel mode [ 1.331163] #PF: error_code(0x0002) - not-present page [ 1.331208] PGD 0 P4D 0 [ 1.331233] Oops: 0002 [#1] PREEMPT SMP [ 1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-00049-g670d35fb0144 #165 [ 1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30 [ 1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246 [ 1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001 [ 1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000 [ 1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001 [ 1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed [ 1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000 [ 1.331945] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 1.332008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0 [ 1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.332252] Call Trace: [ 1.332281] __platform_driver_probe+0x92/0xee [ 1.332323] ? rtc_dev_init+0x2b/0x2b [ 1.332358] cmos_init+0x37/0x67 [ 1.332396] do_one_initcall+0x7d/0x168 [ 1.332428] kernel_init_freeable+0x16c/0x1c9 [ 1.332473] ? rest_init+0xc0/0xc0 [ 1.332508] kernel_init+0x5/0x100 [ 1.332543] ret_from_fork+0x1f/0x30 [ 1.332579] CR2: 00000000000000c8 [ 1.332616] ---[ end trace 3bd87f12e9010b87 ]--- [ 1.333549] note: swapper/0[1] exited with preempt_count 1 [ 1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 1.333736] Kernel Offset: disabled Note, this can only be triggered if a driver errors out from this call, which should never happen. If it does, the driver needs to be fixed. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28driver core: platform: Initialize dma_parms for platform devicesUlf Hansson
It's currently the platform driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common platform bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Suggested-by: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Tested-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200422100954.31211-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23driver core: platform: remove redundant assignment to variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200402111341.511801-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-20docs: drivers: fix some warnings at base/platform.c when building docsMauro Carvalho Chehab
Currrently, two warnings are generated when building docs: ./drivers/base/platform.c:136: WARNING: Unexpected indentation. ./drivers/base/platform.c:214: WARNING: Unexpected indentation. As examples are code blocks, they should use "::" markup. However, Example:: Is currently interpreted as a new section. While we could fix kernel-doc to accept such new syntax, it is easier to just replace it with: For Example:: Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/564273815a76136fb5e453969b1012a786d99e28.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-24driver core: platform: Reimplement devm_platform_ioremap_resourceDejin Zheng
Reimplement devm_platform_ioremap_resource() by calling devm_platform_ioremap_and_get_resource() with res = NULL to simplify the code. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200323160612.17277-6-zhengdejin5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-24drivers: provide devm_platform_get_and_ioremap_resource()Dejin Zheng
Since commit "drivers: provide devm_platform_ioremap_resource()", it was wrap platform_get_resource() and devm_ioremap_resource() as single helper devm_platform_ioremap_resource(). but now, many drivers still used platform_get_resource() and devm_ioremap_resource() together in the kernel tree. The reason can not be replaced is they still need use the resource variables obtained by platform_get_resource(). so provide this helper. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200323160612.17277-2-zhengdejin5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11driver code: clarify and fix platform device DMA mask allocationChristoph Hellwig
This does three inter-related things to clarify the usage of the platform device dma_mask field. In the process, fix the bug introduced by cdfee5623290 ("driver core: initialize a default DMA mask for platform device") that caused Artem Tashkinov's laptop to not boot with newer Fedora kernels. This does: - First off, rename the field to "platform_dma_mask" to make it greppable. We have way too many different random fields called "dma_mask" in various data structures, where some of them are actual masks, and some of them are just pointers to the mask. And the structures all have pointers to each other, or embed each other inside themselves, and "pdev" sometimes means "platform device" and sometimes it means "PCI device". So to make it clear in the code when you actually use this new field, give it a unique name (it really should be something even more unique like "platform_device_dma_mask", since it's per platform device, not per platform, but that gets old really fast, and this is unique enough in context). To further clarify when the field gets used, initialize it when we actually start using it with the default value. - Then, use this field instead of the random one-off allocation in platform_device_register_full() that is now unnecessary since we now already have a perfectly fine allocation for it in the platform device structure. - The above then allows us to fix the actual bug, where the error path of platform_device_register_full() would unconditionally free the platform device DMA allocation with 'kfree()'. That kfree() was dont regardless of whether the allocation had been done earlier with the (now removed) kmalloc, or whether setup_pdev_dma_masks() had already been used and the dma_mask pointer pointed to the mask that was part of the platform device. It seems most people never triggered the error path, or only triggered it from a call chain that set an explicit pdevinfo->dma_mask value (and thus caused the unnecessary allocation that was "cleaned up" in the error path) before calling platform_device_register_full(). Robin Murphy points out that in Artem's case the wdat_wdt driver failed in platform_device_add(), and that was the one that had called platform_device_register_full() with pdevinfo.dma_mask = 0, and would have caused that kfree() of pdev.dma_mask corrupting the heap. A later unrelated kmalloc() then oopsed due to the heap corruption. Fixes: cdfee5623290 ("driver core: initialize a default DMA mask for platform device") Reported-bisected-and-tested-by: Artem S. Tashkinov <aros@gmx.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-22driver core: platform: fix u32 greater or equal to zero comparisonColin Ian King
Currently the check that a u32 variable i is >= 0 is always true because the unsigned variable will never be negative, causing the loop to run forever. Fix this by changing the pre-decrement check to a zero check on i followed by a decrement of i. Addresses-Coverity: ("Unsigned compared against 0") Fixes: 39cc539f90d0 ("driver core: platform: Prevent resouce overflow from causing infinite loops") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200116175758.88396-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14driver core: platform: Prevent resouce overflow from causing infinite loopsSimon Schwartz
num_resources in the platform_device struct is declared as a u32. The for loops that iterate over num_resources use an int as the counter, which can cause infinite loops on architectures with smaller ints. Change the loop counters to u32. Signed-off-by: Simon Schwartz <kern.simon@theschwartz.xyz> Link: https://lore.kernel.org/r/2201ce63a2a171ffd2ed14e867875316efcf71db.camel@theschwartz.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10drivers: Fix boot problem on SuperHGuenter Roeck
SuperH images crash too eearly to display any console output. Bisect points to commit 507fd01d5333 ("drivers: move the early platform device support to arch/sh"). An analysis of that patch suggests that early_platform_cleanup() is now called at the wrong time. Restoring its call point fixes the problem. Cc: Bartosz Golaszewski <brgl@bgdev.pl> Fixes: 507fd01d5333 ("drivers: move the early platform device support to arch/sh") Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Landley <rob@landley.net> Link: https://lore.kernel.org/r/20191203205852.15659-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-14driver core: platform: Declare ret variable only onceAndy Shevchenko
We may define ret variable only once and avoid adding it each time platform_get_irq_optional() get extended. For the sake of consistency do the same in __platform_get_irq_byname(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20191023122505.64684-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-14driver core: platform: use the correct callback type for bus_find_deviceSami Tolvanen
platform_find_device_by_driver calls bus_find_device and passes platform_match as the callback function. Casting the function to a mismatching type trips indirect call Control-Flow Integrity (CFI) checking. This change adds a callback function with the correct type and instead of casting the function, explicitly casts the second parameter to struct device_driver* as expected by platform_match. Fixes: 36f3313d6bff9 ("platform: Add platform_find_device_by_driver() helper") Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191112214156.3430-1-samitolvanen@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-05drivers: provide devm_platform_ioremap_resource_byname()Bartosz Golaszewski
Provide a variant of devm_platform_ioremap_resource() that allows to lookup resources from platform devices by name rather than by index. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191022084318.22256-7-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-05drivers: platform: provide devm_platform_ioremap_resource_wc()Bartosz Golaszewski
Provide a write-combined variant of devm_platform_ioremap_resource(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191022084318.22256-5-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-27Merge 5.4-rc5 into driver-core-nextGreg Kroah-Hartman
We want the sysfs fix in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-11driver core: simplify definitions of platform_get_irq*Uwe Kleine-König
platform_get_irq_optional is just a wrapper for __platform_get_irq. So rename __platform_get_irq to platform_get_irq_optional and drop platform_get_irq_optional's previous implementation. This way there is one function and one indirection less without loss of functionality. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20191009093746.12095-1-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07drivers: move the early platform device support to arch/shBartosz Golaszewski
SuperH is the only user of the current implementation of early platform device support. We want to introduce a more robust approach to early probing. As the first step - move all the current early platform code to arch/sh. In order not to export internal drivers/base functions to arch code for this temporary solution - copy the two needed routines for driver matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c. Also: call early_platform_cleanup() from subsys_initcall() so that it's called after all early devices are probed. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07driver core: platform: Add platform_get_irq_byname_optional()Hans de Goede
Some drivers (e.g dwc3) first try to get an IRQ byname and then fall back to the one at index 0. In this case we do not want the error(s) printed by platform_get_irq_byname(). This commit adds a new platform_get_irq_byname_optional(), which does not print errors, for this. While at it also improve the kdoc text for platform_get_irq_byname() a bit. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205037 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20191005210449.3926-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-18Merge tag 'usb-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...
2019-09-03Merge generic_lookup_helpers into usb-nextGreg Kroah-Hartman
The lookup helpers are needed here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 23:34:49 +0000