summaryrefslogtreecommitdiff
path: root/drivers/base/node.c
AgeCommit message (Collapse)Author
2020-12-15mm: memcontrol: account pagetables per nodeShakeel Butt
For many workloads, pagetable consumption is significant and it makes sense to expose it in the memory.stat for the memory cgroups. However at the moment, the pagetables are accounted per-zone. Converting them to per-node and using the right interface will correctly account for the memory cgroups as well. [akpm@linux-foundation.org: export __mod_lruvec_page_state to modules for arch/mips/kvm/] Link: https://lkml.kernel.org/r/20201130212541.2781790-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16mm: don't panic when links can't be created in sysfsLaurent Dufour
At boot time, or when doing memory hot-add operations, if the links in sysfs can't be created, the system is still able to run, so just report the error in the kernel log rather than BUG_ON and potentially make system unusable because the callpath can be called with locks held. Since the number of memory blocks managed could be high, the messages are rate limited. As a consequence, link_mem_sections() has no status to report anymore. Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200915094143.79181-4-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14Merge tag 'driver-core-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.10-rc1 They include a lot of different things, all related to the driver core and/or some driver logic: - sysfs common write functions to make it easier to audit sysfs attributes - device connection cleanups and fixes - devm helpers for a few functions - NOIO allocations for when devices are being removed - minor cleanups and fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits) regmap: debugfs: use semicolons rather than commas to separate statements platform/x86: intel_pmc_core: do not create a static struct device drivers core: node: Use a more typical macro definition style for ACCESS_ATTR drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit drivers core: Miscellaneous changes for sysfs_emit drivers core: Reindent a couple uses around sysfs_emit drivers core: Remove strcat uses around sysfs_emit and neaten drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output dyndbg: use keyword, arg varnames for query term pairs driver core: force NOIO allocations during unplug platform_device: switch to simpler IDA interface driver core: platform: Document return type of more functions Revert "driver core: Annotate dev_err_probe() with __must_check" Revert "test_firmware: Test platform fw loading on non-EFI systems" iio: adc: xilinx-xadc: use devm_krealloc() hwmon: pmbus: use more devres helpers devres: provide devm_krealloc() syscore: Use pm_pr_dbg() for syscore_{suspend,resume}() ...
2020-10-13Merge branch 'acpi-numa'Rafael J. Wysocki
* acpi-numa: docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ACPI: Support Generic Initiator only domains ACPI / NUMA: Add stub function for pxm_to_node() irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory ACPI: Remove side effect of partly creating a node in acpi_get_node() ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node() ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node() ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT ACPI: Add out of bounds and numa_off protections to pxm_to_node()
2020-10-02ACPI: Support Generic Initiator only domainsJonathan Cameron
Generic Initiators are a new ACPI concept that allows for the description of proximity domains that contain a device which performs memory access (such as a network card) but neither host CPU nor Memory. This patch has the parsing code and provides the infrastructure for an architecture to associate these new domains with their nearest memory processing node. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02drivers core: node: Use a more typical macro definition style for ACCESS_ATTRJoe Perches
Remove the trailing semicolon from the macro and add it to its uses. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/faf51a671160cf884efa68fb458d3e8a44b1a7a7.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emitJoe Perches
Convert the unbound sprintf in hugetlb_report_node_meminfo to use sysfs_emit_at so that no possible overrun of a PAGE_SIZE buf can occur. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Link: https://lore.kernel.org/r/894b351b82da6013cde7f36ff4b5493cd0ec30d0.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Miscellaneous changes for sysfs_emitJoe Perches
Change additional instances that could use sysfs_emit and sysfs_emit_at that the coccinelle script could not convert. o macros creating show functions with ## concatenation o unbound sprintf uses with buf+len for start of output to sysfs_emit_at o returns with ?: tests and sprintf to sysfs_emit o sysfs output with struct class * not struct device * arguments Miscellanea: o remove unnecessary initializations around these changes o consistently use int len for return length of show functions o use octal permissions and not S_<FOO> o rename a few show function names so DEVICE_ATTR_<FOO> can be used o use DEVICE_ATTR_ADMIN_RO where appropriate o consistently use const char *output for strings o checkpatch/style neatening Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8bc24444fe2049a9b2de6127389b57edfdfe324d.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Reindent a couple uses around sysfs_emitJoe Perches
Just a couple of whitespace realignment to open parenthesis for multi-line statements. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/33224191421dbb56015eded428edfddcba997d63.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functionsJoe Perches
Convert the various sprintf fmaily calls in sysfs device show functions to sysfs_emit and sysfs_emit_at for PAGE_SIZE buffer safety. Done with: $ spatch -sp-file sysfs_emit_dev.cocci --in-place --max-width=80 . And cocci script: $ cat sysfs_emit_dev.cocci @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - sprintf(buf, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - strcpy(buf, chr); + sysfs_emit(buf, chr); ...> } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - sprintf(buf, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... - len += scnprintf(buf + len, PAGE_SIZE - len, + len += sysfs_emit_at(buf, len, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { ... - strcpy(buf, chr); - return strlen(buf); + return sysfs_emit(buf, chr); } Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/3d033c33056d88bbe34d4ddb62afd05ee166ab9a.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-26mm: don't rely on system state to detect hot-plug operationsLaurent Dufour
In register_mem_sect_under_node() the system_state's value is checked to detect whether the call is made during boot time or during an hot-plug operation. Unfortunately, that check against SYSTEM_BOOTING is wrong because regular memory is registered at SYSTEM_SCHEDULING state. In addition, memory hot-plug operation can be triggered at this system state by the ACPI [1]. So checking against the system state is not enough. The consequence is that on system with interleaved node's ranges like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] This can be seen on PowerPC LPAR after multiple memory hot-plug and hot-unplug operations are done. At the next reboot the node's memory ranges can be interleaved and since the call to link_mem_sections() is made in topology_init() while the system is in the SYSTEM_SCHEDULING state, the node's id is not checked, and the sections registered to multiple nodes: $ ls -l /sys/devices/system/memory/memory21/node* total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 In that case, the system is able to boot but if later one of theses memory blocks is hot-unplugged and then hot-plugged, the sysfs inconsistency is detected and this is triggering a BUG_ON(): kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This patch addresses the root cause by not relying on the system_state value to detect whether the call is due to a hot-plug operation. An extra parameter is added to link_mem_sections() detailing whether the operation is due to a hot-plug operation. [1] According to Oscar Salvador, using this qemu command line, ACPI memory hotplug operations are raised at SYSTEM_SCHEDULING state: $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \ -m size=$MEM,slots=255,maxmem=4294967296k \ -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \ -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \ -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \ -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \ -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \ -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \ -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \ -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \ Fixes: 4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07mm: memcontrol: account kernel stack per nodeShakeel Butt
Currently the kernel stack is being accounted per-zone. There is no need to do that. In addition due to being per-zone, memcg has to keep a separate MEMCG_KERNEL_STACK_KB. Make the stat per-node and deprecate MEMCG_KERNEL_STACK_KB as memcg_stat_item is an extension of node_stat_item. In addition localize the kernel stack stats updates to account_kernel_stack(). Signed-off-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Link: http://lkml.kernel.org/r/20200630161539.1759185-1-shakeelb@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07mm: memcg: convert vmstat slab counters to bytesRoman Gushchin
In order to prepare for per-object slab memory accounting, convert NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE vmstat items to bytes. To make it obvious, rename them to NR_SLAB_RECLAIMABLE_B and NR_SLAB_UNRECLAIMABLE_B (similar to NR_KERNEL_STACK_KB). Internally global and per-node counters are stored in pages, however memcg and lruvec counters are stored in bytes. This scheme may look weird, but only for now. As soon as slab pages will be shared between multiple cgroups, global and node counters will reflect the total number of slab pages. However memcg and lruvec counters will be used for per-memcg slab memory tracking, which will take separate kernel objects in the account. Keeping global and node counters in pages helps to avoid additional overhead. The size of slab memory shouldn't exceed 4Gb on 32-bit machines, so it will fit into atomic_long_t we use for vmstats. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20200623174037.3951353-4-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07mm: memcg: prepare for byte-sized vmstat itemsRoman Gushchin
To implement per-object slab memory accounting, we need to convert slab vmstat counters to bytes. Actually, out of 4 levels of counters: global, per-node, per-memcg and per-lruvec only two last levels will require byte-sized counters. It's because global and per-node counters will be counting the number of slab pages, and per-memcg and per-lruvec will be counting the amount of memory taken by charged slab objects. Converting all vmstat counters to bytes or even all slab counters to bytes would introduce an additional overhead. So instead let's store global and per-node counters in pages, and memcg and lruvec counters in bytes. To make the API clean all access helpers (both on the read and write sides) are dealing with bytes. To avoid back-and-forth conversions a new flavor of read-side helpers is introduced, which always returns values in pages: node_page_state_pages() and global_node_page_state_pages(). Actually new helpers are just reading raw values. Old helpers are simple wrappers, which will complain on an attempt to read byte value, because at the moment no one actually needs bytes. Thanks to Johannes Weiner for the idea of having the byte-sized API on top of the page-sized internal storage. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20200623174037.3951353-3-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: "A few little subsystems and a start of a lot of MM patches. Subsystems affected by this patch series: squashfs, ocfs2, parisc, vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup, swap, memcg, pagemap, memory-failure, vmalloc, kasan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) kasan: move kasan_report() into report.c mm/mm_init.c: report kasan-tag information stored in page->flags ubsan: entirely disable alignment checks under UBSAN_TRAP kasan: fix clang compilation warning due to stack protector x86/mm: remove vmalloc faulting mm: remove vmalloc_sync_(un)mappings() x86/mm/32: implement arch_sync_kernel_mappings() x86/mm/64: implement arch_sync_kernel_mappings() mm/ioremap: track which page-table levels were modified mm/vmalloc: track which page-table levels were modified mm: add functions to track page directory modifications s390: use __vmalloc_node in stack_alloc powerpc: use __vmalloc_node in alloc_vm_stack arm64: use __vmalloc_node in arch_alloc_vmap_stack mm: remove vmalloc_user_node_flags mm: switch the test_vmalloc module to use __vmalloc_node mm: remove __vmalloc_node_flags_caller mm: remove both instances of __vmalloc_node_flags mm: remove the prot argument to __vmalloc_node mm: remove the pgprot argument to __vmalloc ...
2020-06-02mm/writeback: discard NR_UNSTABLE_NFS, use NR_WRITEBACK insteadNeilBrown
After an NFS page has been written it is considered "unstable" until a COMMIT request succeeds. If the COMMIT fails, the page will be re-written. These "unstable" pages are currently accounted as "reclaimable", either in WB_RECLAIMABLE, or in NR_UNSTABLE_NFS which is included in a 'reclaimable' count. This might have made sense when sending the COMMIT required a separate action by the VFS/MM (e.g. releasepage() used to send a COMMIT). However now that all writes generated by ->writepages() will automatically be followed by a COMMIT (since commit 919e3bd9a875 ("NFS: Ensure we commit after writeback is complete")) it makes more sense to treat them as writeback pages. So this patch removes NR_UNSTABLE_NFS and accounts unstable pages in NR_WRITEBACK and WB_WRITEBACK. A particular effect of this change is that when wb_check_background_flush() calls wb_over_bg_threshold(), the latter will report 'true' a lot less often as the 'unstable' pages are no longer considered 'dirty' (as there is nothing that writeback can do about them anyway). Currently wb_check_background_flush() will trigger writeback to NFS even when there are relatively few dirty pages (if there are lots of unstable pages), this can result in small writes going to the server (10s of Kilobytes rather than a Megabyte) which hurts throughput. With this patch, there are fewer writes which are each larger on average. Where the NR_UNSTABLE_NFS count was included in statistics virtual-files, the entry is retained, but the value is hard-coded as zero. static trace points and warning printks which mentioned this counter no longer report it. [akpm@linux-foundation.org: re-layout comment] [akpm@linux-foundation.org: fix printk warning] Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com> Acked-by: Michal Hocko <mhocko@suse.com> [mm] Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Link: http://lkml.kernel.org/r/87d06j7gqa.fsf@notabene.neil.brown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-15scs: Add page accounting for shadow call stack allocationsSami Tolvanen
This change adds accounting for the memory allocated for shadow stacks. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-04-02mm/sparse: rename pfn_present() to pfn_in_present_section()Pingfan Liu
After introducing mem sub section concept, pfn_present() loses its literal meaning, and will not be necessary a truth on partial populated mem section. Since all of the callers use it to judge an absent section, it is better to rename pfn_present() as pfn_in_present_section(). Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Leonardo Bras <leonardo@linux.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Link: http://lkml.kernel.org/r/1581919110-29575-1-git-send-email-kernelfans@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04mm/vmstat: add helpers to get vmstat item names for each enum typeKonstantin Khlebnikov
Statistics in vmstat is combined from counters with different structure, but names for them are merged into one array. This patch adds trivial helpers to get name for each item: const char *zone_stat_name(enum zone_stat_item item); const char *numa_stat_name(enum numa_stat_item item); const char *node_stat_name(enum node_stat_item item); const char *writeback_stat_name(enum writeback_stat_item item); const char *vm_event_name(enum vm_event_item item); Names for enum writeback_stat_item are folded in the middle of vmstat_text so this patch moves declaration into header to calculate offset of following items. Also this patch reuses piece of node stat names for lru list names: const char *lru_list_name(enum lru_list lru); This returns common lru list names: "inactive_anon", "active_anon", "inactive_file", "active_file", "unevictable". [khlebnikov@yandex-team.ru: do not use size of vmstat_text as count of /proc/vmstat items] Link: http://lkml.kernel.org/r/157152151769.4139.15423465513138349343.stgit@buzz Link: https://lore.kernel.org/linux-mm/cd1c42ae-281f-c8a8-70ac-1d01d417b2e1@infradead.org/T/#u Link: http://lkml.kernel.org/r/157113012325.453.562783073839432766.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm,thp: stats for file backed THPSong Liu
In preparation for non-shmem THP, this patch adds a few stats and exposes them in /proc/meminfo, /sys/bus/node/devices/<node>/meminfo, and /proc/<pid>/task/<tid>/smaps. This patch is mostly a rewrite of Kirill A. Shutemov's earlier version: https://lkml.kernel.org/r/20170126115819.58875-5-kirill.shutemov@linux.intel.com/ Link: http://lkml.kernel.org/r/20190801184244.3169074-5-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24drivers/base/memory.c: don't store end_section_nr in memory blocksDavid Hildenbrand
Each memory block spans the same amount of sections/pages/bytes. The size is determined before the first memory block is created. No need to store what we can easily calculate - and the calculations even look simpler now. Michal brought up the idea of variable-sized memory blocks. However, if we ever implement something like this, we will need an API compatibility switch and reworks at various places (most code assumes a fixed memory block size). So let's cleanup what we have right now. While at it, fix the variable naming in register_mem_sect_under_node() - we no longer talk about a single section. Link: http://lkml.kernel.org/r/20190809110200.2746-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24drivers/base/node.c: simplify unregister_memory_block_under_nodes()David Hildenbrand
We don't allow to offline memory block devices that belong to multiple numa nodes. Therefore, such devices can never get removed. It is sufficient to process a single node when removing the memory block. No need to iterate over each and every PFN. We already have the nid stored for each memory block. Make sure that the nid always has a sane value. Please note that checking for node_online(nid) is not required. If we would have a memory block belonging to a node that is no longer offline, then we would have a BUG in the node offlining code. Link: http://lkml.kernel.org/r/20190719135244.15242-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of ↵David Hildenbrand
pfns walk_memory_range() was once used to iterate over sections. Now, it iterates over memory blocks. Rename the function, fixup the documentation. Also, pass start+size instead of PFNs, which is what most callers already have at hand. (we'll rework link_mem_sections() most probably soon) Follow-up patches will rework, simplify, and move walk_memory_blocks() to drivers/base/memory.c. Note: walk_memory_blocks() only works correctly right now if the start_pfn is aligned to a section start. This is the case right now, but we'll generalize the function in a follow up patch so the semantics match the documentation. [akpm@linux-foundation.org: remove unused variable] Link: http://lkml.kernel.org/r/20190614100114.311-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: Arun KS <arunks@codeaurora.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm: make register_mem_sect_under_node() staticDavid Hildenbrand
It is only used internally. Link: http://lkml.kernel.org/r/20190614100114.311-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Keith Busch <keith.busch@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: make unregister_memory_block_under_nodes() never failDavid Hildenbrand
We really don't want anything during memory hotunplug to fail. We always pass a valid memory block device, that check can go. Avoid allocating memory and eventually failing. As we are always called under lock, we can use a static piece of memory. This avoids having to put the structure onto the stack, having to guess about the stack size of callers. Patch inspired by a patch from Oscar Salvador. In the future, there might be no need to iterate over nodes at all. mem->nid should tell us exactly what to remove. Memory block devices with mixed nodes (added during boot) should properly fenced off and never removed. Link: http://lkml.kernel.org/r/20190527111152.16324-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: remove memory block devices before arch_remove_memory()David Hildenbrand
Let's factor out removing of memory block devices, which is only necessary for memory added via add_memory() and friends that created memory block devices. Remove the devices before calling arch_remove_memory(). This finishes factoring out memory block device handling from arch_add_memory() and arch_remove_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-10-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Oscar Salvador <osalvador@suse.de> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-21drivers: base/node.c: fixes a kernel-doc markupsMauro Carvalho Chehab
There was a typo at the name of the vars inside the kernel-doc comment, causing those warnings: ./drivers/base/node.c:690: warning: Function parameter or member 'mem_nid' not described in 'register_memory_node_under_compute_node' ./drivers/base/node.c:690: warning: Function parameter or member 'cpu_nid' not described in 'register_memory_node_under_compute_node' ./drivers/base/node.c:690: warning: Excess function parameter 'mem_node' description in 'register_memory_node_under_compute_node' ./drivers/base/node.c:690: warning: Excess function parameter 'cpu_node' description in 'register_memory_node_under_compute_node' There's also a description missing here: ./drivers/base/node.c:78: warning: Function parameter or member 'hmem_attrs' not described in 'node_access_nodes' Copy an existing description from another function call. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04node: Add memory-side caching attributesKeith Busch
System memory may have caches to help improve access speed to frequently requested address ranges. While the system provided cache is transparent to the software accessing these memory ranges, applications can optimize their own access based on cache attributes. Provide a new API for the kernel to register these memory-side caches under the memory node that provides it. The new sysfs representation is modeled from the existing cpu cacheinfo attributes, as seen from /sys/devices/system/cpu/<cpu>/cache/. Unlike CPU cacheinfo though, the node cache level is reported from the view of the memory. A higher level number is nearer to the CPU, while lower levels are closer to the last level memory. The exported attributes are the cache size, the line size, associativity indexing, and write back policy, and add the attributes for the system memory caches to sysfs stable documentation. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Brice Goglin <Brice.Goglin@inria.fr> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04node: Add heterogenous memory access attributesKeith Busch
Heterogeneous memory systems provide memory nodes with different latency and bandwidth performance attributes. Provide a new kernel interface for subsystems to register the attributes under the memory target node's initiator access class. If the system provides this information, applications may query these attributes when deciding which node to request memory. The following example shows the new sysfs hierarchy for a node exporting performance attributes: # tree -P "read*|write*"/sys/devices/system/node/nodeY/accessZ/initiators/ /sys/devices/system/node/nodeY/accessZ/initiators/ |-- read_bandwidth |-- read_latency |-- write_bandwidth `-- write_latency The bandwidth is exported as MB/s and latency is reported in nanoseconds. The values are taken from the platform as reported by the manufacturer. Memory accesses from an initiator node that is not one of the memory's access "Z" initiator nodes linked in the same directory may observe different performance than reported here. When a subsystem makes use of this interface, initiators of a different access number may not have the same performance relative to initiators in other access numbers, or omitted from the any access class' initiators. Descriptions for memory access initiator performance access attributes are added to sysfs stable documentation. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04node: Link memory nodes to their compute nodesKeith Busch
Systems may be constructed with various specialized nodes. Some nodes may provide memory, some provide compute devices that access and use that memory, and others may provide both. Nodes that provide memory are referred to as memory targets, and nodes that can initiate memory access are referred to as memory initiators. Memory targets will often have varying access characteristics from different initiators, and platforms may have ways to express those relationships. In preparation for these systems, provide interfaces for the kernel to export the memory relationship among different nodes memory targets and their initiators with symlinks to each other. If a system provides access locality for each initiator-target pair, nodes may be grouped into ranked access classes relative to other nodes. The new interface allows a subsystem to register relationships of varying classes if available and desired to be exported. A memory initiator may have multiple memory targets in the same access class. The target memory's initiators in a given class indicate the nodes access characteristics share the same performance relative to other linked initiator nodes. Each target within an initiator's access class, though, do not necessarily perform the same as each other. A memory target node may have multiple memory initiators. All linked initiators in a target's class have the same access characteristics to that target. The following example show the nodes' new sysfs hierarchy for a memory target node 'Y' with access class 0 from initiator node 'X': # symlinks -v /sys/devices/system/node/nodeX/access0/ relative: /sys/devices/system/node/nodeX/access0/targets/nodeY -> ../../nodeY # symlinks -v /sys/devices/system/node/nodeY/access0/ relative: /sys/devices/system/node/nodeY/access0/initiators/nodeX -> ../../nodeX The new attributes are added to the sysfs stable documentation. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-26mm, proc: add KReclaimable to /proc/meminfoVlastimil Babka
The vmstat NR_KERNEL_MISC_RECLAIMABLE counter is for kernel non-slab allocations that can be reclaimed via shrinker. In /proc/meminfo, we can show the sum of all reclaimable kernel allocations (including slab) as "KReclaimable". Add the same counter also to per-node meminfo under /sys With this counter, users will have more complete information about kernel memory usage. Non-slab reclaimable pages (currently just the ION allocator) will not be missing from /proc/meminfo, making users wonder where part of their memory went. More precisely, they already appear in MemAvailable, but without the new counter, it's not obvious why the value in MemAvailable doesn't fully correspond with the sum of other counters participating in it. Link: http://lkml.kernel.org/r/20180731090649.16028-6-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Roman Gushchin <guro@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17mm/memory_hotplug.c: drop unnecessary checks from register_mem_sect_under_node()Oscar Salvador
Callers of register_mem_sect_under_node() are always passing a valid memory_block (not NULL), so we can safely drop the check for NULL. In the same way, register_mem_sect_under_node() is only called in case the node is online, so we can safely remove that check as well. Link: http://lkml.kernel.org/r/20180622111839.10071-5-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of ↵Oscar Salvador
walk_memory_range() link_mem_sections() and walk_memory_range() share most of the code, so we can use convert link_mem_sections() into a dummy function that calls walk_memory_range() with a callback to register_mem_sect_under_node(). This patch converts register_mem_sect_under_node() in order to match a walk_memory_range's callback, getting rid of the check_nid argument and checking instead if the system is still boothing, since we only have to check for the nid if the system is in such state. Link: http://lkml.kernel.org/r/20180622111839.10071-4-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Suggested-by: Pavel Tatashin <pasha.tatashin@oracle.com> Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25mm/memory_hotplug: fix leftover use of struct page during hotplugJonathan Cameron
The case of a new numa node got missed in avoiding using the node info from page_struct during hotplug. In this path we have a call to register_mem_sect_under_node (which allows us to specify it is hotplug so don't change the node), via link_mem_sections which unfortunately does not. Fix is to pass check_nid through link_mem_sections as well and disable it in the new numa node path. Note the bug only 'sometimes' manifests depending on what happens to be in the struct page structures - there are lots of them and it only needs to match one of them. The result of the bug is that (with a new memory only node) we never successfully call register_mem_sect_under_node so don't get the memory associated with the node in sysfs and meminfo for the node doesn't report it. It came up whilst testing some arm64 hotplug patches, but appears to be universal. Whilst I'm triggering it by removing then reinserting memory to a node with no other elements (thus making the node disappear then appear again), it appears it would happen on hotplugging memory where there was none before and it doesn't seem to be related the arm64 patches. These patches call __add_pages (where most of the issue was fixed by Pavel's patch). If there is a node at the time of the __add_pages call then all is well as it calls register_mem_sect_under_node from there with check_nid set to false. Without a node that function returns having not done the sysfs related stuff as there is no node to use. This is expected but it is the resulting path that fails... Exact path to the problem is as follows: mm/memory_hotplug.c: add_memory_resource() The node is not online so we enter the 'if (new_node)' twice, on the second such block there is a call to link_mem_sections which calls into drivers/node.c: link_mem_sections() which calls drivers/node.c: register_mem_sect_under_node() which calls get_nid_for_pfn and keeps trying until the output of that matches the expected node (passed all the way down from add_memory_resource) It is effectively the same fix as the one referred to in the fixes tag just in the code path for a new node where the comments point out we have to rerun the link creation because it will have failed in register_new_memory (as there was no node at the time). (actually that comment is wrong now as we don't have register_new_memory any more it got renamed to hotplug_memory_register in Pavel's patch). Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com Fixes: fc44f7f9231a ("mm/memory_hotplug: don't read nid from struct page during hotplug") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05mm/memory_hotplug: optimize memory hotplugPavel Tatashin
During memory hotplugging we traverse struct pages three times: 1. memset(0) in sparse_add_one_section() 2. loop in __add_section() to set do: set_page_node(page, nid); and SetPageReserved(page); 3. loop in memmap_init_zone() to call __init_single_pfn() This patch removes the first two loops, and leaves only loop 3. All struct pages are initialized in one place, the same as it is done during boot. The benefits: - We improve memory hotplug performance because we are not evicting the cache several times and also reduce loop branching overhead. - Remove condition from hotpath in __init_single_pfn(), that was added in order to fix the problem that was reported by Bharata in the above email thread, thus also improve performance during normal boot. - Make memory hotplug more similar to the boot memory initialization path because we zero and initialize struct pages only in one function. - Simplifies memory hotplug struct page initialization code, and thus enables future improvements, such as multi-threading the initialization of struct pages in order to improve hotplug performance even further on larger machines. [pasha.tatashin@oracle.com: v5] Link: http://lkml.kernel.org/r/20180228030308.1116-7-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180215165920.8570-7-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Baoquan He <bhe@redhat.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05mm/memory_hotplug: don't read nid from struct page during hotplugPavel Tatashin
During memory hotplugging the probe routine will leave struct pages uninitialized, the same as it is currently done during boot. Therefore, we do not want to access the inside of struct pages before __init_single_page() is called during onlining. Because during hotplug we know that pages in one memory block belong to the same numa node, we can skip the checking. We should keep checking for the boot case. [pasha.tatashin@oracle.com: s/register_new_memory()/hotplug_memory_register()] Link: http://lkml.kernel.org/r/20180228030308.1116-6-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180215165920.8570-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-15driver core: node: use put_device() if device_register failArvind Yadav
if device_register() returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-13mm: only display online cpus of the numa nodeZhen Lei
When I execute numactl -H (which reads /sys/devices/system/node/nodeX/cpumap and displays cpumask_of_node for each node), I get different result on X86 and arm64. For each numa node, the former only displayed online CPUs, and the latter displayed all possible CPUs. Unfortunately, both Linux documentation and numactl manual have not described it clear. I sent a mail to ask for help, and Michal Hocko replied that he preferred to print online cpus because it doesn't really make much sense to bind anything on offline nodes. Will said: "I suspect the vast majority (if not all) code that reads this file was developed for x86, so having the same behaviour for arm64 sounds like something we should do ASAP before people try to special case with things like #ifdef __aarch64__. I'd rather have this in 4.14 if possible." Link: http://lkml.kernel.org/r/1506678805-15392-2-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tianhong Ding <dingtianhong@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Libin <huawei.libin@huawei.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08mm: change the call sites of numa statistics itemsKemi Wang
Patch series "Separate NUMA statistics from zone statistics", v2. Each page allocation updates a set of per-zone statistics with a call to zone_statistics(). As discussed in 2017 MM summit, these are a substantial source of overhead in the page allocator and are very rarely consumed. This significant overhead in cache bouncing caused by zone counters (NUMA associated counters) update in parallel in multi-threaded page allocation (pointed out by Dave Hansen). A link to the MM summit slides: http://people.netfilter.org/hawk/presentations/MM-summit2017/MM-summit2017-JesperBrouer.pdf To mitigate this overhead, this patchset separates NUMA statistics from zone statistics framework, and update NUMA counter threshold to a fixed size of MAX_U16 - 2, as a small threshold greatly increases the update frequency of the global counter from local per cpu counter (suggested by Ying Huang). The rationality is that these statistics counters don't need to be read often, unlike other VM counters, so it's not a problem to use a large threshold and make readers more expensive. With this patchset, we see 31.3% drop of CPU cycles(537-->369, see below) for per single page allocation and reclaim on Jesper's page_bench03 benchmark. Meanwhile, this patchset keeps the same style of virtual memory statistics with little end-user-visible effects (only move the numa stats to show behind zone page stats, see the first patch for details). I did an experiment of single page allocation and reclaim concurrently using Jesper's page_bench03 benchmark on a 2-Socket Broadwell-based server (88 processors with 126G memory) with different size of threshold of pcp counter. Benchmark provided by Jesper D Brouer(increase loop times to 10000000): https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/bench Threshold CPU cycles Throughput(88 threads) 32 799 241760478 64 640 301628829 125 537 358906028 <==> system by default 256 468 412397590 512 428 450550704 4096 399 482520943 20000 394 489009617 30000 395 488017817 65533 369(-31.3%) 521661345(+45.3%) <==> with this patchset N/A 342(-36.3%) 562900157(+56.8%) <==> disable zone_statistics This patch (of 3): In this patch, NUMA statistics is separated from zone statistics framework, all the call sites of NUMA stats are changed to use numa-stats-specific functions, it does not have any functionality change except that the number of NUMA stats is shown behind zone page stats when users *read* the zone info. E.g. cat /proc/zoneinfo ***Base*** ***With this patch*** nr_free_pages 3976 nr_free_pages 3976 nr_zone_inactive_anon 0 nr_zone_inactive_anon 0 nr_zone_active_anon 0 nr_zone_active_anon 0 nr_zone_inactive_file 0 nr_zone_inactive_file 0 nr_zone_active_file 0 nr_zone_active_file 0 nr_zone_unevictable 0 nr_zone_unevictable 0 nr_zone_write_pending 0 nr_zone_write_pending 0 nr_mlock 0 nr_mlock 0 nr_page_table_pages 0 nr_page_table_pages 0 nr_kernel_stack 0 nr_kernel_stack 0 nr_bounce 0 nr_bounce 0 nr_zspages 0 nr_zspages 0 numa_hit 0 *nr_free_cma 0* numa_miss 0 numa_hit 0 numa_foreign 0 numa_miss 0 numa_interleave 0 numa_foreign 0 numa_local 0 numa_interleave 0 numa_other 0 numa_local 0 *nr_free_cma 0* numa_other 0 ... ... vm stats threshold: 10 vm stats threshold: 10 ... ... The next patch updates the numa stats counter size and threshold. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1503568801-21305-2-git-send-email-kemi.wang@intel.com Signed-off-by: Kemi Wang <kemi.wang@intel.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Ying Huang <ying.huang@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10mm: drop useless local parameters of __register_one_node()Dou Liyang
__register_one_node() initializes local parameters "p_node" & "parent" for register_node(). But, register_node() does not use them. Remove the related code of "parent" node, cleanup __register_one_node() and register_node(). Link: http://lkml.kernel.org/r/1498013846-20149-1-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm, memory_hotplug: drop CONFIG_MOVABLE_NODEMichal Hocko
Commit 20b2f52b73fe ("numa: add CONFIG_MOVABLE_NODE for movable-dedicated node") has introduced CONFIG_MOVABLE_NODE without a good explanation on why it is actually useful. It makes a lot of sense to make movable node semantic opt in but we already have that because the feature has to be explicitly enabled on the kernel command line. A config option on top only makes the configuration space larger without a good reason. It also adds an additional ifdefery that pollutes the code. Just drop the config option and make it de-facto always enabled. This shouldn't introduce any change to the semantic. Link: http://lkml.kernel.org/r/20170529114141.536-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Reza Arbab <arbab@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Kani Toshimitsu <toshi.kani@hpe.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: vmstat: move slab statistics from zone to node countersJohannes Weiner
Patch series "mm: per-lruvec slab stats" Josef is working on a new approach to balancing slab caches and the page cache. For this to work, he needs slab cache statistics on the lruvec level. These patches implement that by adding infrastructure that allows updating and reading generic VM stat items per lruvec, then switches some existing VM accounting sites, including the slab accounting ones, to this new cgroup-aware API. I'll follow up with more patches on this, because there is actually substantial simplification that can be done to the memory controller when we replace private memcg accounting with making the existing VM accounting sites cgroup-aware. But this is enough for Josef to base his slab reclaim work on, so here goes. This patch (of 5): To re-implement slab cache vs. page cache balancing, we'll need the slab counters at the lruvec level, which, ever since lru reclaim was moved from the zone to the node, is the intersection of the node, not the zone, and the memcg. We could retain the per-zone counters for when the page allocator dumps its memory information on failures, and have counters on both levels - which on all but NUMA node 0 is usually redundant. But let's keep it simple for now and just move them. If anybody complains we can restore the per-zone counters. [hannes@cmpxchg.org: fix oops] Link: http://lkml.kernel.org/r/20170605183511.GA8915@cmpxchg.org Link: http://lkml.kernel.org/r/20170530181724.27197-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm, memory_hotplug: split up register_one_node()Michal Hocko
Memory hotplug (add_memory_resource) has to reinitialize node infrastructure if the node is offline (one which went through the complete add_memory(); remove_memory() cycle). That involves node registration to the kobj infrastructure (register_node), the proper association with cpus (register_cpu_under_node) and finally creation of node<->memblock symlinks (link_mem_sections). The last part requires to know node_start_pfn and node_spanned_pages which we currently have but a leter patch will postpone this initialization to the onlining phase which happens later. In fact we do not need to rely on the early pgdat initialization even now because the currently hot added pfn range is currently known. Split register_one_node into core which does all the common work for the boot time NUMA initialization and the hotplug (__register_one_node). register_one_node keeps the full initialization while hotplug calls __register_one_node and manually calls link_mem_sections for the proper range. This shouldn't introduce any functional change. Link: http://lkml.kernel.org/r/20170515085827.16474-6-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: drop page_initialized check from get_nid_for_pfnMichal Hocko
Commit c04fc586c1a4 ("mm: show node to memory section relationship with symlinks in sysfs") has added means to export memblock<->node association into the sysfs. It has also introduced get_nid_for_pfn which is a rather confusing counterpart of pfn_to_nid which checks also whether the pfn page is already initialized (page_initialized). This is done by checking page::lru != NULL which doesn't make any sense at all. Nothing in this path really relies on the lru list being used or initialized. Just remove it because this will become a problem with later patches. Thanks to Reza Arbab for testing which revealed this to be a problem (http://lkml.kernel.org/r/20170403202337.GA12482@dhcp22.suse.cz) Link: http://lkml.kernel.org/r/20170515085827.16474-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-23mm: Adjust system_state checkThomas Gleixner
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. get_nid_for_pfn() checks for system_state == BOOTING to decide whether to use early_pfn_to_nid() when CONFIG_DEFERRED_STRUCT_PAGE_INIT=y. That check is dubious, because the switch to state RUNNING happes way after page_alloc_init_late() has been invoked. Change the check to less than RUNNING state so it covers the new intermediate states as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20170516184735.528279534@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-02treewide: replace obsolete _refok by __refFabian Frederick
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28mm: track NR_KERNEL_STACK in KiB instead of number of stacksAndy Lutomirski
Currently, NR_KERNEL_STACK tracks the number of kernel stacks in a zone. This only makes sense if each kernel stack exists entirely in one zone, and allowing vmapped stacks could break this assumption. Since frv has THREAD_SIZE < PAGE_SIZE, we need to track kernel stack allocations in a unit that divides both THREAD_SIZE and PAGE_SIZE on all architectures. Keep it simple and use KiB. Link: http://lkml.kernel.org/r/083c71e642c5fa5f1b6898902e1b2db7b48940d4.1468523549.git.luto@kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28mm: move most file-based accounting to the nodeMel Gorman
There are now a number of accounting oddities such as mapped file pages being accounted for on the node while the total number of file pages are accounted on the zone. This can be coped with to some extent but it's confusing so this patch moves the relevant file-based accounted. Due to throttling logic in the page allocator for reliable OOM detection, it is still necessary to track dirty and writeback pages on a per-zone basis. [mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting] Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28mm: rename NR_ANON_PAGES to NR_ANON_MAPPEDMel Gorman
NR_FILE_PAGES is the number of file pages. NR_FILE_MAPPED is the number of mapped file pages. NR_ANON_PAGES is the number of mapped anon pages. This is unhelpful naming as it's easy to confuse NR_FILE_MAPPED and NR_ANON_PAGES for mapped pages. This patch renames NR_ANON_PAGES so we have NR_FILE_PAGES is the number of file pages. NR_FILE_MAPPED is the number of mapped file pages. NR_ANON_MAPPED is the number of mapped anon pages. Link: http://lkml.kernel.org/r/1467970510-21195-19-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>