summaryrefslogtreecommitdiff
path: root/drivers/atm
AgeCommit message (Collapse)Author
2014-02-26atm: firestream: fix interruptible_sleep_on raceArnd Bergmann
interruptible_sleep_on is racy and going away. This replaces the one use in the firestream driver with the appropriate wait_event_interruptible variant. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19atm: solos-pci: make solos_bh() as staticDaeseok Youn
sparse says: drivers/atm/solos-pci.c:763:6: warning: symbol 'solos_bh' was not declared. Should it be static? Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19atm: nicstar: use NULL instead of 0 for pointerDaeseok Youn
sparse says: drivers/atm/nicstar.c:642:27: warning: Using plain integer as NULL pointer drivers/atm/nicstar.c:644:27: warning: Using plain integer as NULL pointer drivers/atm/nicstar.c:982:51: warning: Using plain integer as NULL pointer drivers/atm/nicstar.c:996:51: warning: Using plain integer as NULL pointer Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19atm: ambassador: use NULL instead of 0 for pointerDaeseok Youn
sparse says: drivers/atm/ambassador.c:1928:24: warning: Using plain integer as NULL pointer Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26atm: slight optimization of addr comparedingtianhong
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10atm: solos-pci: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10atm: he: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19atm: idt77252: fix dev refcnt leakYing Xue
init_card() calls dev_get_by_name() to get a network deceive. But it doesn't decrease network device reference count after the device is used. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21atm: firestream: remove duplicate defineMichael Opdenacker
This patch removes a duplicate define in drivers/atm/firestream.h Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-15atm: nicstar: fix regression made by previous patchAndy Shevchenko
The commit 8390f814 "atm: nicstar: re-use native mac_pton() helper" did a usefull thing. However, mac_pton() returns 1 in the case of the successfully parsed input. This patch fixes a typo. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13drivers/atm/he.c: convert to module_pci_driverLibo Chen
Signed-off-by: Libo Chen <libo.chen@huawei.com> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04atm: he: print MAC via %pMAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04atm: nicstar: re-use native mac_pton() helperAndy Shevchenko
There is a nice helper to parse MAC. Let's use it and remove custom implementation. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17net, atm/ambassader: convert skb->tail into skb_tail_pointer(skb)Isaku Yamahata
The change set of 27a884dc, "[SK_BUFF]: Convert skb->tail to sk_buff_data_t" converted skb->tail from pointer into sk_buff_data_t. It missed skb->tail in drivers/atm/ambassador.c. This patch converts skb->tail into skb_tail_pointer(skb). Found by inspection. Compile tested only. Cc: Simon Horman <horms@verge.net.au> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29atm: he: use mdelay instead of large udelay constantsArnd Bergmann
ARM cannot handle udelay for more than 2 miliseconds, and it is rather bad style to block the cpu for 16ms anyway, so let's use msleep instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27atm/nicstar: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. The existing code looks buggy to me - ID 0 is treated as no-ID but allocation specifies 0 as lower limit and there's no error handling after partial success. This conversion keeps the bugs unchanged. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27atm/nicstar: don't use idr_remove_all()Tejun Heo
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-08atm/iphase: rename fregt_t -> ffreg_tHeiko Carstens
We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the iphase atm device driver, which causes the compile error below. Unfortunately the s390 typedef can't be renamed, since it's a user visible api, nor can I change the include order in s390 code to avoid the conflict. So simply rename the iphase typedef to a new name. Fixes this compile error: In file included from drivers/atm/iphase.c:66:0: drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t' In file included from next/arch/s390/include/asm/ptrace.h:9:0, from next/arch/s390/include/asm/lowcore.h:12, from next/arch/s390/include/asm/thread_info.h:30, from include/linux/thread_info.h:54, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/atm/iphase.c:43: next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03Drivers: atm: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-21solos-pci: double lock in geos_gpio_store()Dan Carpenter
There is a typo here so we do a double lock instead of an unlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19solos-pci: ensure all TX packets are aligned to 4 bytesDavid Woodhouse
The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer, if skb->data isn't suitably aligned. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19solos-pci: add firmware upgrade support for new modelsNathan Williams
Signed-off-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19solos-pci: remove superfluous debug outputNathan Williams
Signed-off-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19solos-pci: add GPIO support for newer versions on Geos boardNathan Williams
dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed, only register on newer boards, register under PCI device instead of duplicating them under each ATM device. Signed-off-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-12solos-pci: fix double-free of TX skb in DMA modeDavid Woodhouse
We weren't clearing card->tx_skb[port] when processing the TX done interrupt. If there wasn't another skb ready to transmit immediately, this led to a double-free because we'd free it *again* next time we did have a packet to send. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-01Merge git://git.infradead.org/users/dwmw2/atmDavid S. Miller
David Woodhouse says: ==================== This is the result of pulling on the thread started by Krzysztof Mazur's original patch 'pppoatm: don't send frames to destroyed vcc'. Various problems in the pppoatm and br2684 code are solved, some of which were easily triggered and would panic the kernel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-02solos-pci: remove list_vccs() debugging functionDavid Woodhouse
No idea why we've gone so long dumping a list of VCCs with vci==0 on every ->open() call... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-12-02solos-pci: use GFP_KERNEL where possible, not GFP_ATOMICDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-12-02solos-pci: clean up pclose() functionDavid Woodhouse
- Flush pending TX skbs from the queue rather than waiting for them all to complete (suggested by Krzysztof Mazur <krzysiek@podlesie.net>). - Clear ATM_VF_ADDR only when the PKT_PCLOSE packet has been submitted. - Don't clear ATM_VF_READY at all — vcc_destroy_socket() does that for us. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-12-02solos-pci: Fix leak of skb received for unknown vccNathan Williams
... and ensure that the next skb is set up for RX in the DMA case. Signed-off-by: Nathan Williams <nathan@traverse.com.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-12-02solos-pci: wait for pending TX to complete when releasing vccDavid Woodhouse
We should no longer be calling the old pop routine for the vcc, after vcc_release() has completed. Make sure we wait for any pending TX skbs to complete, by waiting for our own PKT_PCLOSE control skb to be sent. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-11-28atm: forever loop loading ambassador firmwareDan Carpenter
There was a forever loop introduced here when we converted this to request_firmware() back in 2008. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-06sections: fix section conflicts in drivers/atmAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-06drivers/atm/iphase.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24solos-pci: Fix DMA supportDavid Woodhouse
DMA support has finally made its way to the top of the TODO list, having realised that a Geode using MMIO can't keep up with two ADSL2+ lines each running at 21Mb/s. This patch fixes a couple of bugs in the DMA support in the driver, so once the corresponding FPGA update is complete and tested everything should work properly. We weren't storing the currently-transmitting skb, so we were never unmapping it and never freeing/popping it when the TX was done. And the addition of pci_set_master() is fairly self-explanatory. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-06skb: Add inline helper for getting the skb end offset from headAlexander Duyck
With the recent changes for how we compute the skb truesize it occurs to me we are probably going to have a lot of calls to skb_end_pointer - skb->head. Instead of running all over the place doing that it would make more sense to just make it a separate inline skb_end_offset(skb) that way we can return the correct value without having gcc having to do all the optimization to cancel out skb->head - skb->head. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-04Driver: Atm: Remove 'break' after 'return' statement.Santosh Nayak
'break' is unnecessary after 'return' statement. Remove all such 'break' as clean up. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-16eni: fix driver remove function and driver probe error path.françois romieu
- add eni_do_release() to balance eni_do_init - turn the zeroes DMA area into a per device data Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11drivers/atm/eni.c: ensure arguments to request_irq and free_irq are compatibleJulia Lawall
Convert calls to free_irq so that the second argument is the same as the last argument of the corresponding call to request_irq. Without this property, free_irq does nothing. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/sfc/rx.c Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change the rx_buf->is_page boolean into a set of u16 flags, and another to adjust how ->ip_summed is initialized. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19drivers/atm/solos-pci.c: exchange pci_iounmapsJulia Lawall
The calls to pci_iounmap are in the wrong order, as compared to the associated calls to pci_iomap. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,x; statement S,S1; int ret; @@ e = pci_iomap(x,...) ... when != pci_iounmap(x,e) if (<+...e...+>) S ... when any when != pci_iounmap(x,e) *if (...) { ... when != pci_iounmap(x,e) return ...; } ... when any pci_iounmap(x,e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-01atm: Fix typo in lanai.cMasanari Iida
Correct spelling "reseting" to resetting" in drivers/atm/lanai.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-26atm: eliminate atm_guess_pdu2truesize()chas williams - CONTRACTOR
Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03atm/iphase : removal of PCI space dereferences.françois romieu
Mostly PHY access and a few (ugly) debug statements for DMA control. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 20:05:05 +0000