summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2019-01-12Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph, with little fixes all over the map - Loop caching fix for offset/bs change (Jaegeuk Kim) - Block documentation tweaks (Jeff, Jon, Weiping, John) - null_blk zoned tweak (John) - ahch mvebu suspend/resume support. Should have gone into the merge window, but there was some confusion on which tree had it. (Miquel) * tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits) ata: ahci: mvebu: request PHY suspend/resume for Armada 3700 ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs ata: ahci: mvebu: remove stale comment ata: libahci_platform: comply to PHY framework loop: drop caches if offset or block_size are changed block: fix kerneldoc comment for blk_attempt_plug_merge() nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps block: doc: add slice_idle_us to bfq documentation block: clarify documentation for blk_{start|finish}_plug ...
2019-01-11ata: ahci: mvebu: request PHY suspend/resume for Armada 3700Miquel Raynal
A feature has been added in the libahci driver: the possibility to set a new flag in hpriv->flags to let the core handle PHY suspend/resume automatically. Make use of this feature to make suspend to RAM work with SATA drives on A3700. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAMMiquel Raynal
A3700 comphy initialization is done in the firmware (TF-A). Looking at the SATA PHY initialization routine, there is a comment about "vendor specific" registers. Two registers are mentioned. They are not initialized there in the firmware because they are AHCI related, while the firmware at this location does only PHY configuration. The solution to avoid doing such initialization is relying on U-Boot. While this work at boot time, U-Boot is definitely not going to run during a resume after suspending to RAM. Two possible solutions were considered: * Fixing the firmware. * Fixing the kernel driver. The first solution would take ages to propagate, while the second solution is easy to implement as the driver as been a little bit reworked to prepare for such platform configuration. Hence, this patch adds an Armada 3700 configuration function to set these two registers both at boot time (in the probe) and after a suspend (in the resume path). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCsMiquel Raynal
At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: remove stale commentMiquel Raynal
For Armada-38x (32-bit) SoCs, PM platform support has been added since: commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the introduction of Armada 38x support") commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support") For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM platform support has always existed. There are even suspend/resume hooks in this driver since: commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Remove the stale comment at the end of this driver stating that all the above does not exist yet. Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: libahci_platform: comply to PHY frameworkMiquel Raynal
Current implementation of the libahci does not take into account the new PHY framework. Correct the situation by adding a call to phy_set_mode() before phy_power_on(). PHYs should also be handled at suspend/resume time. For this, call ahci_platform_enable/disable_phys() at suspend/resume_host() time. These calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of the libahci driver must set manually in hpriv->flags at probe time. This is to avoid breaking users that have not been tested with this change. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-02Merge tag 'for-4.21/libata-20190102' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fix from Jens Axboe: "This libata change missed the original libata pull request. Just a single fix in here, fixing a missed reference drop" * tag 'for-4.21/libata-20190102' of git://git.kernel.dk/linux-block: ata: pata_macio: add of_node_put()
2018-12-28Merge tag 'for-4.21/libata-20181221' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata updates from Jens Axboe: "Here are the libata changes for this merge window. Nothing major in here. This contains: - GPIO descriptor conversions (Linus Walleij) - rcar deferred probing fix (Sergei Shtylyov)" * tag 'for-4.21/libata-20181221' of git://git.kernel.dk/linux-block: sata_rcar: fix deferred probing ata: palmld: Introduce state container ata: palmld: Convert to GPIO descriptors ata: rb532_cf: Convert to use GPIO descriptors ata: sata_highbank: Convert to use GPIO descriptors ata: pxa: Drop <linux/gpio.h> include
2018-12-21ata: pata_macio: add of_node_put()Yangtao Li
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10sata_rcar: fix deferred probingSergei Shtylyov
The driver overrides the error codes returned by platform_get_irq() to -EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Switch to propagating the error code upstream, still checking/overriding IRQ0 as libata regards it as "no IRQ" (thus polling) anyway... Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq") Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-09Merge tag 'v4.20-rc6' into for-4.21/blockJens Axboe
Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the two corruption fixes. We're going to be overhauling the direct dispatch path, and we need to do that on top of the changes we made for that in mainline. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-05ata: palmld: Introduce state containerLinus Walleij
This creates a state container struct for the Palm LifeDrive ATA controller, and puts the ATA host and the two GPIO descriptors into this container. This avoids using a singleton so potentially multiple PATA interfaces can be instantiated. Suggested-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04ata: palmld: Convert to GPIO descriptorsLinus Walleij
Instead of passing GPIO numbers directly to the PalmLD ATA driver, pass GPIO descriptors from the board file and handle these in the driver. Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04ata: rb532_cf: Convert to use GPIO descriptorsLinus Walleij
Pass a GPIO descriptor for the device instead of a hardcoded GPIO number from the global GPIO numberspace. Use gpio descriptors throughout. Cut the now completely unused platform data for the CF slot. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Waldemar Brodkorb <wbx@openadk.org> Cc: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04ata: sata_highbank: Convert to use GPIO descriptorsLinus Walleij
This pure device tree driver is simple to convert to use just GPIO descriptors instead of GPIO numbers. So let's just do it. Cc: Mark Langsdorf <mlangsdo@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04ata: pxa: Drop <linux/gpio.h> includeLinus Walleij
This driver does not use GPIO or anything from the GPIO header. Drop the include. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-03libata: whitelist all SAMSUNG MZ7KM* solid-state disksJuha-Matti Tilli
These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-18Merge tag 'v4.20-rc3' into for-4.21/blockJens Axboe
Merge in -rc3 to resolve a few conflicts, but also to get a few important fixes that have gone into mainline since the block 4.21 branch was forked off (most notably the SCSI queue issue, which is both a conflict AND needed fix). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15block: don't hold the queue_lock over blk_abort_requestChristoph Hellwig
There is nothing it could synchronize against, so don't go through the pains of acquiring the lock. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-12libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSDDiego Viola
med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q). Set model_rev to NULL and blacklist the device. Cc: stable@vger.kernel.org Signed-off-by: Diego Viola <diego.viola@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-08sata_rcar: convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-26libata: Apply NOLPM quirk for SAMSUNG MZ7TD256HAFV-000L9Diego Viola
med_power_with_dipm causes my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q). Switching the LPM to max_performance fixes this issue. Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-22Merge tag 'for-4.20/libata-20181021' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata updates from Jens Axboe: "Here are the libata changes queued up for 4.20: - %pOFn device_node.name conversion (Rob Herring) - Use LBAM/LBAH password defines instead of hardcoding (Linus Walleij) - Series adding support for the allwinner R40 AHCI controller (Corentin Labbe) - Disable ALPM for Ampere Computing device (Suman Tripathi) - ahci bcrm fixes (Florian Fainelli) - Redundant Kconfig defaults (Bartlomiej Zolnierkiewicz) - Code cleanups (Nathan Chancellor)" * tag 'for-4.20/libata-20181021' of git://git.kernel.dk/linux-block: ata: remove redundant 'default n' from Kconfig ata: ep93xx: Use proper enums for directions ata: ahci_brcm: Allow using driver or DSL SoCs ata: ahci_brcm: Match BCM63138 compatible strings ata: ahci_brcm: Allow optional reset controller to be used dt-bindings: ata: Document BCM63138 compatible string pata_atiixp: Remove unnecessary parentheses ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA dt-bindings: ata: update ahci_sunxi bindings ata: ahci_sunxi: add support for r40 dt-bindings: ata: ahci-platform: document phy-supply ata: ahci_platform: add support for PHY controller regulator dt-bindings: ata: ahci-platform: document ahci-supply ata: ahci_platform: add support for AHCI controller regulator dt-bindings: ata: ahci-platform: fix indentation of target-supply libata: Use SMART LBAM/LBAH password defines ata: ahci: Convert to using %pOFn instead of device_node.name
2018-10-10PCI: Remove pci_set_dma_max_seg_size()Christoph Hellwig
The few callers can just use dma_set_max_seg_size ()directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-10ata: remove redundant 'default n' from KconfigBartlomiej Zolnierkiewicz
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-04ata: ep93xx: Use proper enums for directionsNathan Chancellor
Clang warns when one enumerated type is implicitly converted to another. drivers/ata/pata_ep93xx.c:662:36: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] drv_data->dma_rx_data.direction = DMA_FROM_DEVICE; ~ ^~~~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:670:36: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] drv_data->dma_tx_data.direction = DMA_TO_DEVICE; ~ ^~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:681:19: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] conf.direction = DMA_FROM_DEVICE; ~ ^~~~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:692:19: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] conf.direction = DMA_TO_DEVICE; ~ ^~~~~~~~~~~~~ Use the equivalent valued enums from the expected type so that Clang no longer warns about a conversion. DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1 DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2 Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-01ata: ahci_brcm: Allow using driver or DSL SoCsFlorian Fainelli
The Broadcom STB AHCI controller is the same as the one found on DSL SoCs, so we will utilize the same driver on these systems as well. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-01ata: ahci_brcm: Match BCM63138 compatible stringsFlorian Fainelli
Match the "brcm,bcm63138-ahci" compatible string in order to allow this driver to probe on such platforms. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-01ata: ahci_brcm: Allow optional reset controller to be usedFlorian Fainelli
On BCM63138, we need to reset the AHCI core prior to start utilizing it, grab the reset controller device cookie and do that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21Merge tag 'for-linus-20180920' of git://git.kernel.dk/linux-blockGreg Kroah-Hartman
Jens writes: "Storage fixes for 4.19-rc5 - Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft) - NVMe pull request from Christoph, and a single ANA log page fix (Hannes) - Regression fix for libata qd32 support, where we trigger an illegal active command transition. This fixes a CD-ROM detection issue that was reported, but could also trigger premature completion of the internal tag (me)" * tag 'for-linus-20180920' of git://git.kernel.dk/linux-block: floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl libata: mask swap internal and hardware tag nvme: count all ANA groups for ANA Log page
2018-09-20libata: mask swap internal and hardware tagJens Axboe
hen we're comparing the hardware completion mask passed in from the driver with the internal tag pending mask, we need to account for the fact that the internal tag is different from the hardware tag. If not, then we can end up either prematurely completing the internal tag (since it's not set in the hw mask), or simply flag an error: ata2: illegal qc_active transition (100000000->00000001) If the internal tag is set, then swap that with the hardware tag in this case before comparing with what the hardware reports. Fixes: 28361c403683 ("libata: add extra internal command") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201151 Cc: stable@vger.kernel.org Reported-by: Paul Sbarra <sbarra.paul@gmail.com> Tested-by: Paul Sbarra <sbarra.paul@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-11pata_atiixp: Remove unnecessary parenthesesNathan Chancellor
Clang warns when more than one set of parentheses is used for a single conditional statement: drivers/ata/pata_atiixp.c:282:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE)) ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/ata/pata_atiixp.c:282:19: note: remove extraneous parentheses around the comparison to silence this warning if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE)) ~ ^ ~ drivers/ata/pata_atiixp.c:282:19: note: use '=' to turn this equality comparison into an assignment if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE)) ^~ = 1 warning generated. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-07ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATASuman Tripathi
Due to hardware errata, Ampere Computing eMAG SATA can't support AHCI ALPM feature. This patch disables the AHCI ALPM feature for eMAG SATA. Signed-off-by: Suman Trpathi <stripathi@amperecomputing.com> Signed-off-by: Rameshwar Prasad Sahu <rameshwar.sahu@amperecomputing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-05Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of very minor fixes and a couple of reverts to fix a major problem (the attempt to change the busy count causes a hang when attempting to change the drive cache type)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: aacraid: fix a signedness bug Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq" Revert "scsi: core: fix scsi_host_queue_ready" scsi: libata: Add missing newline at end of file scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info() scsi: hpsa: limit transfer length to 1MB, not 512kB scsi: lpfc: Correct MDS diag and nvmet configuration scsi: lpfc: Default fdmi_on to on scsi: csiostor: fix incorrect port capabilities scsi: csiostor: add a check for NULL pointer after kmalloc() scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters scsi: core: Update SCSI_MQ_DEFAULT help text to match default
2018-09-03ata: ahci_sunxi: add support for r40Corentin Labbe
This patch add the r40 compatible to the ahci_sunxi's supported list of compatible. Since R40 need ahci_platform to handle the reset controller, we also add the new AHCI_PLATFORM_GET_RESETS flag for ahci_platform_get_resources(). This has no consequence for older platform (a10, a20) since the reset is optional. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-03ata: ahci_platform: add support for PHY controller regulatorCorentin Labbe
The SoC R40 AHCI controller need a PHY regulator to work. But since the PHY is embedded in the controller, we cannot do a DT node for it, since phy-supply works only in node with a PHY compatible. So this patch adds a way to add an optional phy-supply regulator on AHCI controller node. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-03ata: ahci_platform: add support for AHCI controller regulatorCorentin Labbe
The SoC R40 AHCI controller need a regulator to work. So this patch add a way to add an optional regulator on AHCI controller. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-30libata: Use SMART LBAM/LBAH password definesLinus Walleij
Instead of hardcoding magic values for the SMART password, use the defines in <linux/ata.h> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-28ata: ahci: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-27ata: ftide010: Add a quirk for SQ201Linus Walleij
The DMA is broken on this specific device for some unknown reason (probably badly designed or plain broken interface electronics) and will only work with PIO. Other users of the same hardware does not have this problem. Add a specific quirk so that this Gemini device gets DMA turned off. Also fix up some code around passing the port information around in probe while we're at it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-27scsi: libata: Add missing newline at end of fileGeert Uytterhoeven
With gcc 4.1.2: drivers/ata/libata-core.c:7396:33: warning: no newline at end of file Fixes: 2fa4a32613c9182b ("scsi: libsas: dynamically allocate and free ata host") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-24Merge branch 'for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting. Mostly ahci and ahci_platform changes, many around power management" * 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ata: ahci_platform: enable to get and control reset ata: libahci_platform: add reset control support ata: add an extra argument to ahci_platform_get_resources() ata: sata_rcar: Add r8a77965 support ata: sata_rcar: exclude setting of PHY registers in Gen3 ata: sata_rcar: really mask all interrupts on Gen2 and later Revert "ata: ahci_platform: allow disabling of hotplug to save power" ata: libahci: Allow reconfigure of DEVSLP register ata: libahci: Correct setting of DEVSLP register ata: ahci: Enable DEVSLP by default on x86 with SLP_S0 ata: ahci: Support state with min power but Partial low power state Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc" ata: sata_rcar: Add rudimentary Runtime PM support ata: sata_rcar: Provide a short-hand for &pdev->dev ata: Only output sg element mapped number in verbose debug ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG ata: ahci_platform: convert kcalloc to devm_kcalloc ata: ahci_platform: convert kzallloc to kcalloc ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown libata: remove ata_sff_data_xfer_noirq() ...
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-22ata: ahci_platform: enable to get and control resetKunihiko Hayashi
Unlike SoC-specific driver, generic ahci_platform driver doesn't have any chances to control resets. This adds AHCI_PLATFORM_GET_RESETS to ahci_platform_get_resources() on the generic driver to enable reset control support. Suggested-by: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-08-22ata: libahci_platform: add reset control supportKunihiko Hayashi
Add support to get and control a list of resets for the device as optional and shared. These resets must be kept de-asserted until the device is enabled. This is specified as shared because some SoCs like UniPhier series have common reset controls with all ahci controller instances. However, according to Thierry's view, https://www.spinics.net/lists/linux-ide/msg55357.html some hardware-specific drivers already use their own resets, and the common reset make a path to occur double controls of resets. The ahci_platform_get_resources() can get and control the reset only when the second argument includes AHCI_PLATFORM_GET_RESETS bit. Suggested-by: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-08-22ata: add an extra argument to ahci_platform_get_resources()Kunihiko Hayashi
Add an extra argument to ahci_platform_get_resources(), that is for the bitmap representing the resource to get in this function. Currently there is no resources to be defined, so all the callers set '0' to the argument. Suggested-by: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...