summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2020-08-28Merge branch 'acpi-mm'Rafael J. Wysocki
* acpi-mm: ACPI: OSL: Prevent acpi_release_memory() from returning too early ACPI: ioremap: avoid redundant rounding to OS page size
2020-08-25ACPI: OSL: Prevent acpi_release_memory() from returning too earlyRafael J. Wysocki
After commit 1757659d022b ("ACPI: OSL: Implement deferred unmapping of ACPI memory") in some cases acpi_release_memory() may return before the target memory mappings actually go away, because they are released asynchronously now. Prevent it from returning prematurely by making it wait for the next RCU grace period to elapse, for all of the RCU callbacks to complete and for all of the scheduled work items to be flushed before returning. Fixes: 1757659d022b ("ACPI: OSL: Implement deferred unmapping of ACPI memory") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-21ACPI: ioremap: avoid redundant rounding to OS page sizeArd Biesheuvel
The arm64 implementation of acpi_os_ioremap() was recently updated to tighten the checks around which parts of memory are permitted to be mapped by ACPI code, which generally only needs access to memory regions that are statically described by firmware, and any attempts to access memory that is in active use by the OS is generally a bug or a hacking attempt. This tightening is based on the EFI memory map, which describes all memory in the system. The AArch64 architecture permits page sizes of 16k and 64k in addition to the EFI default, which is 4k, which means that the EFI memory map may describe regions that cannot be mapped seamlessly if the OS page size is greater than 4k. This is usually not a problem, given that the EFI spec does not permit memory regions requiring different memory attributes to share a 64k page frame, and so the usual rounding to page size performed by ioremap() is sufficient to deal with this. However, this rounding does complicate our EFI memory map permission check, due to the loss of information that occurs when several small regions share a single 64k page frame (where rounding each of them will result in the same 64k single page region). However, due to the fact that the region check occurs *before* the call to ioremap() where the necessary rounding is performed, we can deal with this issue simply by removing the redundant rounding performed by acpi_os_map_iomem(), as it appears to be the only place where the arguments to a call to acpi_os_ioremap() are rounded up. So omit the rounding in the call, and instead, apply the necessary masking when assigning the map->virt member. Fixes: 1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-21ACPI: SoC: APD: Check return value of acpi_dev_get_property()Furquan Shaikh
`fch_misc_setup()` uses `acpi_dev_get_property()` to read the value of "is-rv" passed in by BIOS in ACPI tables. However, not all BIOSes might pass in this property and hence it is important to first check the return value of `acpi_dev_get_property()` before referencing the object filled by it. Signed-off-by: Furquan Shaikh <furquan@google.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-15Merge tag 'acpi-5.9-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk driver and the Designware i2c driver (changes from Akshu Agrawal and Pu Wen)" * tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: clk: x86: Support RV architecture ACPI: APD: Add a fmw property is_raven clk: x86: Change name from ST to FCH ACPI: APD: Change name from ST to FCH i2c: designware: Add device HID for Hygon I2C controller
2020-08-11Merge tag 'libnvdimm-for-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updayes from Vishal Verma: "You'd normally receive this pull request from Dan Williams, but he's busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm this cycle. This adds a new feature in libnvdimm - 'Runtime Firmware Activation', and a few small cleanups and fixes in libnvdimm and DAX. I'd originally intended to make separate topic-based pull requests - one for libnvdimm, and one for DAX, but some of the DAX material fell out since it wasn't quite ready. Summary: - add 'Runtime Firmware Activation' support for NVDIMMs that advertise the relevant capability - misc libnvdimm and DAX cleanups" * tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr libnvdimm/security: the 'security' attr never show 'overwrite' state libnvdimm/security: fix a typo ACPI: NFIT: Fix ARS zero-sized allocation dax: Fix incorrect argument passed to xas_set_err() ACPI: NFIT: Add runtime firmware activate support PM, libnvdimm: Add runtime firmware activation support libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO() drivers/dax: Expand lock scope to cover the use of addresses fs/dax: Remove unused size parameter dax: print error message by pr_info() in __generic_fsdax_supported() driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW} tools/testing/nvdimm: Emulate firmware activation commands tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation tools/testing/nvdimm: Add command debug messages tools/testing/nvdimm: Cleanup dimm index passing ACPI: NFIT: Define runtime firmware activation commands ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor libnvdimm: Validate command family indices
2020-08-07ACPI: APD: Add a fmw property is_ravenAkshu Agrawal
Since there is slight difference in AMD RV based soc in misc clk architecture. The fmw property will help in differentiating the SoCs. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-07ACPI: APD: Change name from ST to FCHAkshu Agrawal
AMD SoC general pupose clk is present in new platforms with same MMIO mappings. We can reuse the same clk handler support for other platforms. Hence, changing name from ST(SoC) to FCH(IP) Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-07i2c: designware: Add device HID for Hygon I2C controllerPu Wen
Add device HID HYGO0010 to match the Hygon ACPI Vendor ID (HYGO) that was registered in http://www.uefi.org/acpi_id_list, and the I2C controller on Hygon paltform will use the HID. Signed-off-by: Pu Wen <puwen@hygon.cn> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-06Merge tag 'thermal-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-05Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: - NVMe: - ZNS support (Aravind, Keith, Matias, Niklas) - Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David, Dongli, Max, Sagi) - null_blk zone capacity support (Aravind) - MD: - raid5/6 fixes (ChangSyun) - Warning fixes (Damien) - raid5 stripe fixes (Guoqing, Song, Yufen) - sysfs deadlock fix (Junxiao) - raid10 deadlock fix (Vitaly) - struct_size conversions (Gustavo) - Set of bcache updates/fixes (Coly) * tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits) md/raid5: Allow degraded raid6 to do rmw md/raid5: Fix Force reconstruct-write io stuck in degraded raid5 raid5: don't duplicate code for different paths in handle_stripe raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show md: print errno in super_written md/raid5: remove the redundant setting of STRIPE_HANDLE md: register new md sysfs file 'uuid' read-only md: fix max sectors calculation for super 1.0 nvme-loop: remove extra variable in create ctrl nvme-loop: set ctrl state connecting after init nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths nvme-multipath: fix logic for non-optimized paths nvme-rdma: fix controller reset hang during traffic nvme-tcp: fix controller reset hang during traffic nvmet: introduce the passthru Kconfig option nvmet: introduce the passthru configfs interface nvmet: Add passthru enable/disable helpers nvmet: add passthru code to process commands nvme: export nvme_find_get_ns() and nvme_put_ns() nvme: introduce nvme_ctrl_get_by_path() ...
2020-08-03Merge tag 'acpi-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These eliminate significant AML processing overhead related to using operation regions in system memory, update the ACPICA code in the kernel to upstream revision 20200717 (including a fix to prevent operation region reference counts from overflowing in some cases), remove the last bits of the (long deprecated) ACPI procfs interface and do some assorted cleanups. Specifics: - Eliminate significant AML processing overhead related to using operation regions in system memory by reworking the management of memory mappings in the ACPI code to defer unmap operations (to do them outside of the ACPICA locks, among other things) and making the memory operation reagion handler avoid releasing memory mappings created by it too early (Rafael Wysocki). - Update the ACPICA code in the kernel to upstream revision 20200717: * Prevent operation region reference counts from overflowing in some cases (Erik Kaneda). * Replace one-element array with flexible-array (Gustavo A. R. Silva). - Fix ACPI PCI hotplug reference counting (Rafael Wysocki). - Drop last bits of the ACPI procfs interface (Thomas Renninger). - Drop some redundant checks from the code parsing ACPI tables related to NUMA (Hanjun Guo). - Avoid redundant object evaluation in the ACPI device properties handling code (Heikki Krogerus). - Avoid unecessary memory overhead related to storing the signatures of the ACPI tables recognized by the kernel (Ard Biesheuvel). - Add missing newline characters when printing module parameter values in some places (Xiongfeng Wang). - Update the link to the ACPI specifications in some places (Tiezhu Yang). - Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R. Silva). - Drop redundant variable initialization from the APEI code (Colin Ian King). - Drop uninitialized_var() from the ACPI PAD driver (Jason Yan). - Replace HTTP links with HTTPS ones in the ACPI code (Alexander A. Klimov)" * tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) ACPI: APEI: remove redundant assignment to variable rc ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check ACPI: NUMA: Remove the useless sub table pointer check ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array() ACPICA: Update version to 20200717 ACPICA: Do not increment operation_region reference counts for field units ACPICA: Replace one-element array with flexible-array ACPI: Replace HTTP links with HTTPS ones ACPI: Use valid link to the ACPI specification ACPI: OSL: Clean up the removal of unused memory mappings ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem() ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address() ACPICA: Preserve memory opregion mappings ACPI: OSL: Implement deferred unmapping of ACPI memory ACPI: Use fallthrough pseudo-keyword PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context() ACPI: tables: avoid relocations for table signature array ACPI: PAD: Eliminate usage of uninitialized_var() macro ACPI: sysfs: add newlines when printing module parameters ACPI: EC: add newline when printing 'ec_event_clearing' module parameter ...
2020-08-03Merge tag 'pm-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The most significant change here is the extension of the Energy Model to cover non-CPU devices (as well as CPUs) from Lukasz Luba. There is also some new hardware support (Ice Lake server idle states table for intel_idle, Sapphire Rapids and Power Limit 4 support in the RAPL driver), some new functionality in the existing drivers (eg. a new switch to disable/enable CPU energy-efficiency optimizations in intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci, devfreq), including the elimination of W=1 build warnings from cpufreq done by Lee Jones. Specifics: - Make the Energy Model cover non-CPU devices (Lukasz Luba). - Add Ice Lake server idle states table to the intel_idle driver and eliminate a redundant static variable from it (Chen Yu, Rafael Wysocki). - Eliminate all W=1 build warnings from cpufreq (Lee Jones). - Add support for Sapphire Rapids and for Power Limit 4 to the Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui). - Fix function name in kerneldoc comments in the idle_inject power capping driver (Yangtao Li). - Fix locking issues with cpufreq governors and drop a redundant "weak" function definition from cpufreq (Viresh Kumar). - Rearrange cpufreq to register non-modular governors at the core_initcall level and allow the default cpufreq governor to be specified in the kernel command line (Quentin Perret). - Extend, fix and clean up the intel_pstate driver (Srinivas Pandruvada, Rafael Wysocki): * Add a new sysfs attribute for disabling/enabling CPU energy-efficiency optimizations in the processor. * Make the driver avoid enabling HWP if EPP is not supported. * Allow the driver to handle numeric EPP values in the sysfs interface and fix the setting of EPP via sysfs in the active mode. * Eliminate a static checker warning and clean up a kerneldoc comment. - Clean up some variable declarations in the powernv cpufreq driver (Wei Yongjun). - Fix up the ->enter_s2idle callback definition to cover the case when it points to the same function as ->idle correctly (Neal Liu). - Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson). - Make the PM core emit "changed" uevent when adding/removing the "wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi). - Add a helper macro for declaring PM callbacks and use it in the MMC jz4740 driver (Paul Cercueil). - Fix white space in some places in the hibernate code and make the system-wide PM code use "const char *" where appropriate (Xiang Chen, Alexey Dobriyan). - Add one more "unsafe" helper macro to the freezer to cover the NFS use case (He Zhe). - Change the language in the generic PM domains framework to use parent/child terminology and clean up a typo and some comment fromatting in that code (Kees Cook, Geert Uytterhoeven). - Update the operating performance points OPP framework (Lukasz Luba, Andrew-sh.Cheng, Valdis Kletnieks): * Refactor dev_pm_opp_of_register_em() and update related drivers. * Add a missing function export. * Allow disabled OPPs in dev_pm_opp_get_freq(). - Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier): * Add support for delayed timers to the devfreq core and make the Samsung exynos5422-dmc driver use it. * Unify sysfs interface to use "df-" as a prefix in instance names consistently. * Fix devfreq_summary debugfs node indentation. * Add the rockchip,pmu phandle to the rk3399_dmc driver DT bindings. * List Dmitry Osipenko as the Tegra devfreq driver maintainer. * Fix typos in the core devfreq code. - Update the pm-graph utility to version 5.7 including a number of fixes related to suspend-to-idle (Todd Brandt). - Fix coccicheck errors and warnings in the cpupower utility (Shuah Khan). - Replace HTTP links with HTTPs ones in multiple places (Alexander A. Klimov)" * tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) cpuidle: ACPI: fix 'return' with no value build warning cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode cpufreq: intel_pstate: Rearrange the storing of new EPP values intel_idle: Customize IceLake server support PM / devfreq: Fix the wrong end with semicolon PM / devfreq: Fix indentaion of devfreq_summary debugfs node PM / devfreq: Clean up the devfreq instance name in sysfs attr memory: samsung: exynos5422-dmc: Add module param to control IRQ mode memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold memory: samsung: exynos5422-dmc: Use delayed timer as default PM / devfreq: Add support delayed timer for polling mode dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle PM / devfreq: tegra: Add Dmitry as a maintainer PM / devfreq: event: Fix trivial spelling PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent cpuidle: change enter_s2idle() prototype cpuidle: psci: Prevent domain idlestates until consumers are ready cpuidle: psci: Convert PM domain to platform driver cpuidle: psci: Fix error path via converting to a platform driver cpuidle: psci: Fail cpuidle registration if set OSI mode failed ...
2020-08-03Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 and cross-arch updates from Catalin Marinas: "Here's a slightly wider-spread set of updates for 5.9. Going outside the usual arch/arm64/ area is the removal of read_barrier_depends() series from Will and the MSI/IOMMU ID translation series from Lorenzo. The notable arm64 updates include ARMv8.4 TLBI range operations and translation level hint, time namespace support, and perf. Summary: - Removal of the tremendously unpopular read_barrier_depends() barrier, which is a NOP on all architectures apart from Alpha, in favour of allowing architectures to override READ_ONCE() and do whatever dance they need to do to ensure address dependencies provide LOAD -> LOAD/STORE ordering. This work also offers a potential solution if compilers are shown to convert LOAD -> LOAD address dependencies into control dependencies (e.g. under LTO), as weakly ordered architectures will effectively be able to upgrade READ_ONCE() to smp_load_acquire(). The latter case is not used yet, but will be discussed further at LPC. - Make the MSI/IOMMU input/output ID translation PCI agnostic, augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID bus-specific parameter and apply the resulting changes to the device ID space provided by the Freescale FSL bus. - arm64 support for TLBI range operations and translation table level hints (part of the ARMv8.4 architecture version). - Time namespace support for arm64. - Export the virtual and physical address sizes in vmcoreinfo for makedumpfile and crash utilities. - CPU feature handling cleanups and checks for programmer errors (overlapping bit-fields). - ACPI updates for arm64: disallow AML accesses to EFI code regions and kernel memory. - perf updates for arm64. - Miscellaneous fixes and cleanups, most notably PLT counting optimisation for module loading, recordmcount fix to ignore relocations other than R_AARCH64_CALL26, CMA areas reserved for gigantic pages on 16K and 64K configurations. - Trivial typos, duplicate words" Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits) arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack arm64/mm: save memory access in check_and_switch_context() fast switch path arm64: sigcontext.h: delete duplicated word arm64: ptrace.h: delete duplicated word arm64: pgtable-hwdef.h: delete duplicated words bus: fsl-mc: Add ACPI support for fsl-mc bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver of/irq: Make of_msi_map_rid() PCI bus agnostic of/irq: make of_msi_map_get_device_domain() bus agnostic dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus of/device: Add input id to of_dma_configure() of/iommu: Make of_map_rid() PCI agnostic ACPI/IORT: Add an input ID to acpi_dma_configure() ACPI/IORT: Remove useless PCI bus walk ACPI/IORT: Make iort_msi_map_rid() PCI agnostic ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC arm64: enable time namespace support arm64/vdso: Restrict splitting VVAR VMA arm64/vdso: Handle faults on timens page ...
2020-08-03ACPI: NFIT: Fix ARS zero-sized allocationDan Williams
Pending commit in -next "devres: handle zero size in devm_kmalloc()" triggers a boot regression due to the ARS implementation expecting NULL from a zero-sized allocation. Avoid the zero-sized allocation by skipping ARS, otherwise crashes with the following signature when de-referencing ZERO_SIZE_PTR. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:__acpi_nfit_scrub+0x28a/0x350 [nfit] [..] Call Trace: ? acpi_nfit_query_poison+0x6a/0x180 [nfit] acpi_nfit_scrub+0x36/0xb0 [nfit] process_one_work+0x23c/0x580 worker_thread+0x50/0x3b0 Otherwise the implementation correctly aborts when NULL is returned from devm_kzalloc() in ars_status_alloc(). Link: https://lore.kernel.org/r/159624590643.3037264.14157533719042907758.stgit@dwillia2-desk3.amr.corp.intel.com Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-08-03Merge branches 'acpi-mm', 'acpi-tables', 'acpi-apei' and 'acpi-misc'Rafael J. Wysocki
* acpi-mm: ACPI: OSL: Clean up the removal of unused memory mappings ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem() ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address() ACPICA: Preserve memory opregion mappings ACPI: OSL: Implement deferred unmapping of ACPI memory * acpi-tables: ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check ACPI: NUMA: Remove the useless sub table pointer check ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array() ACPI: tables: avoid relocations for table signature array * acpi-apei: ACPI: APEI: remove redundant assignment to variable rc * acpi-misc: ACPI: Replace HTTP links with HTTPS ones ACPI: Use valid link to the ACPI specification ACPI: Use fallthrough pseudo-keyword
2020-08-03Merge branches 'acpi-proc', 'acpi-sysfs', 'acpi-pad', 'acpi-ec', 'acpi-pci' ↵Rafael J. Wysocki
and 'acpi-prop' * acpi-proc: ACPI: procfs: Remove last dirs after being marked deprecated for a decade * acpi-sysfs: ACPI: sysfs: add newlines when printing module parameters * acpi-pad: ACPI: PAD: Eliminate usage of uninitialized_var() macro * acpi-ec: ACPI: EC: add newline when printing 'ec_event_clearing' module parameter * acpi-pci: PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context() * acpi-prop: ACPI: property: use cached name in acpi_fwnode_get_named_child_node()
2020-08-03Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: ACPI: fix 'return' with no value build warning intel_idle: Customize IceLake server support cpuidle: change enter_s2idle() prototype cpuidle: psci: Prevent domain idlestates until consumers are ready cpuidle: psci: Convert PM domain to platform driver cpuidle: psci: Fix error path via converting to a platform driver cpuidle: psci: Fail cpuidle registration if set OSI mode failed cpuidle: psci: Split into two separate build objects intel_idle: Eliminate redundant static variable
2020-07-31cpuidle: ACPI: fix 'return' with no value build warningNeal Liu
Add return value to fix return-type build warning introduced by commit efe9711214e6 ("cpuidle: change enter_s2idle() prototype"). Fixes: efe9711214e6 ("cpuidle: change enter_s2idle() prototype") Signed-off-by: Neal Liu <neal.liu@mediatek.com> [ rjw: Subject & changelog edits, make acpi_idle_enter_s2idle() return 0 in all cases ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29cpuidle: change enter_s2idle() prototypeNeal Liu
Control Flow Integrity(CFI) is a security mechanism that disallows changes to the original control flow graph of a compiled binary, making it significantly harder to perform such attacks. init_state_node() assign same function callback to different function pointer declarations. static int init_state_node(struct cpuidle_state *idle_state, const struct of_device_id *matches, struct device_node *state_node) { ... idle_state->enter = match_id->data; ... idle_state->enter_s2idle = match_id->data; } Function declarations: struct cpuidle_state { ... int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); void (*enter_s2idle) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); }; In this case, either enter() or enter_s2idle() would cause CFI check failed since they use same callee. Align function prototype of enter() since it needs return value for some use cases. The return value of enter_s2idle() is no need currently. Signed-off-by: Neal Liu <neal.liu@mediatek.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-29nvme-pci: add support for ACPI StorageD3Enable propertyDavid E. Box
This patch implements a solution for a BIOS hack used on some currently shipping Intel systems to change driver power management policy for PCIe NVMe drives. Some newer Intel platforms, like some Comet Lake systems, require that PCIe devices use D3 when doing suspend-to-idle in order to allow the platform to realize maximum power savings. This is particularly needed to support ATX power supply shutdown on desktop systems. In order to ensure this happens for root ports with storage devices, Microsoft apparently created this ACPI _DSD property as a way to influence their driver policy. To my knowledge this property has not been discussed with the NVME specification body. Though the solution is not ideal, it addresses a problem that also affects Linux since the NVMe driver's default policy of using NVMe APST during suspend-to-idle prevents the PCI root port from going to D3 and leads to higher power consumption for these platforms. The power consumption difference may be negligible on laptop systems, but many watts on desktop systems when the ATX power supply is blocked from powering down. The patch creates a new nvme_acpi_storage_d3 function to check for the StorageD3Enable property during probe and enables D3 as a quirk if set. It also provides a 'noacpi' module parameter to allow skipping the quirk if needed. Tested with: - PM961 NVMe SED Samsung 512GB - INTEL SSDPEKKF512G8 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-28ACPI: NFIT: Add runtime firmware activate supportDan Williams
Plumb the platform specific backend for the generic libnvdimm firmware activate interface. Register dimm level operations to arm/disarm activation, and register bus level operations to report the dynamic platform-quiesce time relative to the number of dimms armed for firmware activation. A new nfit-specific bus attribute "firmware_activate_noidle" is added to allow the activation to switch between platform enforced, and OS opportunistic device quiesce. In other words, let the hibernate cycle handle in-flight device-dma rather than the platform attempting to increase PCI-E timeouts and the like. Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-28ACPI/IORT: Add an input ID to acpi_dma_configure()Lorenzo Pieralisi
Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Remove useless PCI bus walkLorenzo Pieralisi
The PCI bus domain number (used in the iort_match_node_callback() - pci_domain_nr() call) is cascaded through the PCI bus hierarchy at PCI bus enumeration time, therefore there is no need in iort_find_dev_node() to walk the PCI bus upwards to grab the root bus to be passed to iort_scan_node(), the device->bus PCI bus pointer will do. Remove this useless code. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-5-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_msi_map_rid() PCI agnosticLorenzo Pieralisi
There is nothing PCI specific in iort_msi_map_rid(). Rename the function using a bus protocol agnostic name, iort_msi_map_id(), and convert current callers to it. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-4-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_get_device_domain IRQ domain agnosticLorenzo Pieralisi
iort_get_device_domain() is PCI specific but it need not be, since it can be used to retrieve IRQ domain nexus of any kind by adding an irq_domain_bus_token input to it. Make it PCI agnostic by also renaming the requestor ID input to a more generic ID name. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-3-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NCLorenzo Pieralisi
When the iort_match_node_callback is invoked for a named component the match should be executed upon a device with an ACPI companion. For devices with no ACPI companion set-up the ACPI device tree must be walked in order to find the first parent node with a companion set and check the parent node against the named component entry to check whether there is a match and therefore an IORT node describing the in/out ID translation for the device has been found. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-2-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-27ACPI: APEI: remove redundant assignment to variable rcColin Ian King
The variable rc is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' checkHanjun Guo
acpi_map_pxm_to_node() will never return a NUMA node greater than MAX_NUMNODES, so the 'node >= MAX_NUMNODES' check is not needed. Remove it. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: NUMA: Remove the useless sub table pointer checkHanjun Guo
In acpi_parse_entries_array(), the subtable entries (entry.hdr) will never be NULL, so for ACPI subtable handler in struct acpi_subtable_proc, will never handle NULL subtable entries. Remove those useless subtable pointer checks in the callback handlers. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()Hanjun Guo
acpi_disabled, pointer id and table_header are checked in acpi_table_parse_entries_array(), and acpi_parse_entries_array() is only called by acpi_table_parse_entries_array(), so those checks in acpi_parse_entries_array() are duplicate. Remove those duplicated checks and move the table_size check to acpi_table_parse_entries_array() as well. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPICA: Do not increment operation_region reference counts for field unitsErik Kaneda
ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70 Object reference counts are used as a part of ACPICA's garbage collection mechanism. This mechanism keeps track of references to heap-allocated structures such as the ACPI operand objects. Recent server firmware has revealed that this reference count can overflow on large servers that declare many field units under the same operation_region. This occurs because each field unit declaration will add a reference count to the source operation_region. This change solves the reference count overflow for operation_regions objects by preventing fieldunits from incrementing their operation_region's reference count. Each operation_region's reference count will not be changed by named objects declared under the Field operator. During namespace deletion, the operation_region namespace node will be deleted and each fieldunit will be deleted without touching the deleted operation_region object. Link: https://github.com/acpica/acpica/commit/e17b28cf Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPICA: Replace one-element array with flexible-arrayGustavo A. R. Silva
ACPICA commit 7ba2f3d91a32f104765961fda0ed78b884ae193d The current codebase makes use of one-element arrays in the following form: struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the linux codebase from now on. This issue was found with the help of Coccinelle and audited _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://github.com/acpica/acpica/commit/7ba2f3d9 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: Use valid link to the ACPI specificationTiezhu Yang
Currently, acpi.info is an invalid link to access ACPI specification, the new valid link is https://uefi.org/specifications. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: OSL: Clean up the removal of unused memory mappingsRafael J. Wysocki
Fold acpi_os_map_cleanup_deferred() into acpi_os_map_remove() and pass the latter to INIT_RCU_WORK() in acpi_os_drop_map_ref() to make the code more straightforward. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()Rafael J. Wysocki
There is no reason (knwon to me) why any of the existing users of acpi_os_unmap_iomem() would need to wait for the unused memory mappings left by it to actually go away, so use the deferred unmapping of ACPI memory introduced previously in that function. While at it, fold __acpi_os_unmap_iomem() back into acpi_os_unmap_iomem(), which has become a simple wrapper around it, and make acpi_os_unmap_memory() call the latter. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address()Rafael J. Wysocki
There is no reason (knwon to me) why any of the existing users of acpi_os_unmap_generic_address() would need to wait for the unused memory mappings left by it to actually go away, so use the deferred unmapping of ACPI memory introduced previously in that function. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPICA: Preserve memory opregion mappingsRafael J. Wysocki
The ACPICA's strategy with respect to the handling of memory mappings associated with memory operation regions is to avoid mapping the entire region at once which may be problematic at least in principle (for example, it may lead to conflicts with overlapping mappings having different attributes created by drivers). It may also be wasteful, because memory opregions on some systems take up vast chunks of address space while the fields in those regions actually accessed by AML are sparsely distributed. For this reason, a one-page "window" is mapped for a given opregion on the first memory access through it and if that "window" does not cover an address range accessed through that opregion subsequently, it is unmapped and a new "window" is mapped to replace it. Next, if the new "window" is not sufficient to acess memory through the opregion in question in the future, it will be replaced with yet another "window" and so on. That may lead to a suboptimal sequence of memory mapping and unmapping operations, for example if two fields in one opregion separated from each other by a sufficiently wide chunk of unused address space are accessed in an alternating pattern. The situation may still be suboptimal if the deferred unmapping introduced previously is supported by the OS layer. For instance, the alternating memory access pattern mentioned above may produce a relatively long list of mappings to release with substantial duplication among the entries in it, which could be avoided if acpi_ex_system_memory_space_handler() did not release the mapping used by it previously as soon as the current access was not covered by it. In order to improve that, modify acpi_ex_system_memory_space_handler() to preserve all of the memory mappings created by it until the memory regions associated with them go away. Accordingly, update acpi_ev_system_memory_region_setup() to unmap all memory associated with memory opregions that go away. Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Xiang Li <xiang.z.li@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27ACPI: OSL: Implement deferred unmapping of ACPI memoryRafael J. Wysocki
The ACPI OS layer in Linux uses RCU to protect the walkers of the list of ACPI memory mappings from seeing an inconsistent state while it is being updated. Among other situations, that list can be walked in (NMI and non-NMI) interrupt context, so using a sleeping lock to protect it is not an option. However, performance issues related to the RCU usage in there appear, as described by Dan Williams: "Recently a performance problem was reported for a process invoking a non-trival ASL program. The method call in this case ends up repetitively triggering a call path like: acpi_ex_store acpi_ex_store_object_to_node acpi_ex_write_data_to_field acpi_ex_insert_into_field acpi_ex_write_with_update_rule acpi_ex_field_datum_io acpi_ex_access_region acpi_ev_address_space_dispatch acpi_ex_system_memory_space_handler acpi_os_map_cleanup.part.14 _synchronize_rcu_expedited.constprop.89 schedule The end result of frequent synchronize_rcu_expedited() invocation is tiny sub-millisecond spurts of execution where the scheduler freely migrates this apparently sleepy task. The overhead of frequent scheduler invocation multiplies the execution time by a factor of 2-3X." The source of this is that acpi_ex_system_memory_space_handler() unmaps the memory mapping currently cached by it at the access time if that mapping doesn't cover the memory area being accessed. Consequently, if there is a memory opregion with two fields separated from each other by an unused chunk of address space that is large enough for not being covered by a single mapping, and they happen to be used in an alternating pattern, the unmapping will occur on every acpi_ex_system_memory_space_handler() invocation for that memory opregion and that will lead to significant overhead. Moreover, acpi_ex_system_memory_space_handler() carries out the memory unmapping with the namespace and interpreter mutexes held which may lead to additional latency, because all of the tasks wanting to acquire on of these mutexes need to wait for the memory unmapping operation to complete. To address that, rework acpi_os_unmap_memory() so that it does not release the memory mapping covering the given address range right away and instead make it queue up the mapping at hand for removal via queue_rcu_work(). Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Xiang Li <xiang.z.li@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-25tools/testing/nvdimm: Emulate firmware activation commandsDan Williams
Augment the existing firmware update emulation to track activations and validate proper update vs activate sequencing. The DIMM firmware activate capability has a concept of a maximum amount of time platform firmware will quiesce the system relative to how many DIMMs are being activated in parallel. Simulate that DIMM activation happens serially, 1 second per-DIMM, and limit the max at 3 seconds. The nfit_test0 bus emulates 5 DIMMs so it will take 2 activations to update all DIMMs. Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25ACPI: NFIT: Define runtime firmware activation commandsDan Williams
Platform reboots are expensive. Towards reducing downtime to apply firmware updates the Intel NVDIMM command definition is growing support for applying live firmware updates that only require temporarily suspending memory traffic instead of a full reboot. Follow-on commits add support for triggering firmware activation, this patch only defines the commands, adds probe support, and validates that they are blocked via the ioctl path. The ioctl-path block ensures that the OS is in charge since these commands have side effects only the OS can handle. Specifically firmware activation may cause the memory controller to be quiesced on the order of 100s of milliseconds. In that case Linux ensure the activation only takes place while the OS is in a suspend state. Link: https://pmem.io/documents/IntelOptanePMem_DSM_Interface-V2.0.pdf Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptorDan Williams
DSMs are strictly an ACPI mechanism, evict the bus_dsm_mask concept from the generic 'struct nvdimm_bus_descriptor' object. As a side effect the test facility ->bus_nfit_cmd_force_en is no longer necessary. The test infrastructure can communicate that information directly in ->bus_dsm_mask. Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25libnvdimm: Validate command family indicesDan Williams
The ND_CMD_CALL format allows for a general passthrough of passlisted commands targeting a given command set. However there is no validation of the family index relative to what the bus supports. - Update the NFIT bus implementation (the only one that supports ND_CMD_CALL passthrough) to also passlist the valid set of command family indices. - Update the generic __nd_ioctl() path to validate that field on behalf of all implementations. Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism") Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-09ACPI: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through # [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-07acpi: thermal: Don't call thermal_zone_device_is_enabled()Andrzej Pietrasiewicz
thermal_zone_device_update() can now handle disabled thermal zones, so the check here is not needed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200703104354.19657-2-andrzej.p@collabora.com
2020-07-03Merge branch 'acpi-fan'Rafael J. Wysocki
* acpi-fan: ACPI: fan: Fix Tiger Lake ACPI device ID
2020-06-30ACPI: fan: Fix Tiger Lake ACPI device IDSumeet Pawnikar
Tiger Lake's new unique ACPI device ID for Fan is not valid because of missing 'C' in the ID. Use correct fan device ID. Fixes: c248dfe7e0ca ("ACPI: fan: Add Tiger Lake ACPI device ID") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Cc: 5.6+ <stable@vger.kernel.org> # 5.6+ [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-29thermal: Simplify or eliminate unnecessary set_mode() methodsAndrzej Pietrasiewicz
Setting polling_delay is now done at thermal_core level (by not polling DISABLED devices), so no need to repeat this code. int340x: Checking for an impossible enum value is unnecessary. acpi/thermal: It only prints debug messages. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-11-andrzej.p@collabora.com