summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2014-09-08ACPI / RTC: Fix CMOS RTC opregion handler accesses to wrong addressesLee, Chun-Yi
The value64 parameter is an u64 point that used to transfer the value for write to CMOS, or used to return the value that's read from CMOS. The value64 is an u64 point, so don't need get address again. It causes acpi_cmos_rtc_space_handler always return 0 to reader and didn't write expected value to CMOS. Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-05Merge branches 'acpi-video' and 'acpi-ec'Rafael J. Wysocki
* acpi-video: ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic * acpi-ec: ACPI / EC: Add msi quirk for Clevo W350etq
2014-09-05Merge branches 'acpica', 'acpi-processor' and 'acpi-scan'Rafael J. Wysocki
* acpica: ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package. * acpi-processor: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock * acpi-scan: ACPI / scan: not cache _SUN value in struct acpi_device_pnp
2014-09-03ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lockJiri Kosina
There is a following AB-BA dependency between cpu_hotplug.lock and cpuidle_lock: 1) cpu_hotplug.lock -> cpuidle_lock enable_nonboot_cpus() _cpu_up() cpu_hotplug_begin() LOCK(cpu_hotplug.lock) cpu_notify() ... acpi_processor_hotplug() cpuidle_pause_and_lock() LOCK(cpuidle_lock) 2) cpuidle_lock -> cpu_hotplug.lock acpi_os_execute_deferred() workqueue ... acpi_processor_cst_has_changed() cpuidle_pause_and_lock() LOCK(cpuidle_lock) get_online_cpus() LOCK(cpu_hotplug.lock) Fix this by reversing the order acpi_processor_cst_has_changed() does thigs -- let it first execute the protection against CPU hotplug by calling get_online_cpus() and obtain the cpuidle lock only after that (and perform the symmentric change when allowing CPUs hotplug again and dropping cpuidle lock). Spotted by lockdep. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03ACPI / scan: not cache _SUN value in struct acpi_device_pnpYasuaki Ishimatsu
The _SUN device indentification object is not guaranteed to return the same value every time it is executed, so we should not cache its return value, but rather execute it every time as needed. If it is cached, an incorrect stale value may be used in some situations. This issue was exposed by commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace). Fix it by avoiding to cache the return value of _SUN. Fixes: 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace) Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-02ACPI / EC: Add msi quirk for Clevo W350etqLan Tianyu
Clevo W350etq's EC will not produce GPE interrupt some time after booting. The ACPI notify event won't trigger when the issue takes place. After debugging, adding msi quirk for the machine can fix the issue. This patch is to add msi quirk for the machine. Link: https://bugzilla.kernel.org/show_bug.cgi?id=77431 Reported-and-tested-by: qbanin@gmail.com Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-02ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PCHans de Goede
Link: https://bugs.freedesktop.org/show_bug.cgi?id=81515 Reported-and-tested-by: Hohahiu <rakothedin@gmail.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-02ACPI / video: Add a disable_native_backlight quirkHans de Goede
Some laptops have a working acpi_video backlight control, and using native backlight on these causes a regression where backlight control does not work when userspace is not handling brightness key events. Disable native_backlight on these to fix this. Link: https://bugzilla.kernel.org/show_bug.cgi?id=81691 Reported-and-tested-by: Andre Müller <andre.muller@web.de> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-02ACPI / video: Fix use_native_backlight selection logicHans de Goede
Commit 751109aad583 ("ACPI / video: Change the default for video.use_native_backlight to 1") has changed the default for use_native_backlight from 0 to 1, but instead of changing use_native_backlight_dmi to true, and leaving use_native_backlight_param at -1, it has changed use_native_backlight_param to 1. This causes acpi_video_use_native_backlight() to always think that a value was specified through the param, making it impossible to add a dmi based quirk to force 0 now that the default is 1. This fixes this by restoring the use_native_backlight_param default to -1, and instead setting the use_native_backlight_dmi default to true. Fixes: 751109aad583 (ACPI / video: Change the default for video.use_native_backlight to 1) Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-02ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.Mika Westerberg
Adds ACPICA kernel runtime support to validate contents/format of the _DSD package, similar to the iASL support. Ported by Mika Westerberg. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "One patch to avoid assigning interrupts we don't actually have on non-PC platforms, and two patches that addresses bugs in the new IOAPIC assignment code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, irq, PCI: Keep IRQ assignment for runtime power management x86: irq: Fix bug in setting IOAPIC pin attributes x86: Fix non-PC platform kernel crash on boot due to NULL dereference
2014-08-29x86, irq, PCI: Keep IRQ assignment for runtime power managementJiang Liu
Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins. We need to keep IRQ assignment for PCI devices during runtime power management, otherwise it may cause failure of device wakeups. Commit 3eec595235c17a7 "x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation" has fixed the issue for suspend/ hibernation, we also need the same fix for runtime device sleep too. Fix: https://bugzilla.kernel.org/show_bug.cgi?id=83271 Reported-and-Tested-by: EmanueL Czirai <amanual@openmailbox.org> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: EmanueL Czirai <amanual@openmailbox.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Grant Likely <grant.likely@linaro.org> Link: http://lkml.kernel.org/r/1409304383-18806-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-08-28Merge branches 'acpi-scan', 'acpi-ec' and 'acpi-lpss'Rafael J. Wysocki
* acpi-scan: ACPI: Run fixed event device notifications in process context ACPI / scan: Allow ACPI drivers to bind to PNP device objects * acpi-ec: ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set * acpi-lpss: ACPI / LPSS: Add ACPI IDs for Intel Braswell
2014-08-26ACPI / LPSS: Add ACPI IDs for Intel BraswellAlan Cox
Enable more identifiers for the existing devices for Intel Braswell and Cherryview. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-26ACPI / EC: Add support to disallow QR_EC to be issued before completing ↵Lv Zheng
previous QR_EC There is platform refusing to respond QR_EC when SCI_EVT isn't set which is Acer Aspire V5-573G. By disallowing QR_EC to be issued before the previous one has been completed we are able to reduce the possibilities to trigger issues on such platforms. Note that this fix can only reduce the occurrence rate of this issue, but this issue may still occur when such a platform doesn't clear SCI_EVT before or immediately after completing the previous QR_EC transaction. This patch cannot fix the CLEAR_ON_RESUME quirk which also relies on the assumption that the platforms are able to respond even when SCI_EVT isn't set. But this patch is still useful as it can help to reduce the number of scheduled QR_EC work items. Link: https://bugzilla.kernel.org/show_bug.cgi?id=82611 Reported-and-tested-by: Alexander Mezin <mezin.alexander@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-26ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't setLv Zheng
There is a platform refusing to respond QR_EC when SCI_EVT isn't set (Acer Aspire V5-573G). Currently, we rely on the behaviour that the EC firmware can respond something (for example, 0x00 to indicate "no outstanding events") to QR_EC even when SCI_EVT is not set, but the reporter has complained about AC/battery pluging/unpluging and video brightness change delay on that platform. This is because the work item that has issued QR_EC has to wait until timeout in this case, and the _Qxx method evaluation work item queued after QR_EC one is delayed. It sounds reasonable to fix this issue by: 1. Implementing SCI_EVT sanity check before issuing QR_EC in the EC driver's main state machine. 2. Moving QR_EC issuing out of the work queue used by _Qxx evaluation to a seperate IRQ handling thread. This patch fixes this issue using solution 1. By disallowing QR_EC to be issued when SCI_EVT isn't set, we are able to handle such platform in the EC driver's main state machine. This patch enhances the state machine in this way to survive with such malfunctioning EC firmware. Note that this patch can also fix CLEAR_ON_RESUME quirk which also relies on the assumption that the platforms are able to respond even when SCI_EVT isn't set. Fixes: c0d653412fc8 ACPI / EC: Fix race condition in ec_transaction_completed() Link: https://bugzilla.kernel.org/show_bug.cgi?id=82611 Reported-and-tested-by: Alexander Mezin <mezin.alexander@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-26ACPI: Run fixed event device notifications in process contextLan Tianyu
Currently, notify callbacks for fixed button events are run from interrupt context. That is not necessary and after commit 0bf6368ee8f2 (ACPI / button: Add ACPI Button event via netlink routine) it causes netlink routines to be called from interrupt context which is not correct. Also, that is different from non-fixed device events (including non-fixed button events) whose notify callbacks are all executed from process context. For the above reasons, make fixed button device notify callbacks run in process context which will avoid the deadlock when using netlink to report button events to user space. Fixes: 0bf6368ee8f2 (ACPI / button: Add ACPI Button event via netlink routine) Link: https://lkml.org/lkml/2014/8/21/606 Reported-by: Benjamin Block <bebl@mageta.org> Reported-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> [rjw: Function names, subject and changelog.] Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-26ACPI / scan: Allow ACPI drivers to bind to PNP device objectsRafael J. Wysocki
We generally don't allow ACPI drivers to bind to ACPI device objects that companion "physical" device objects are created for to avoid situations in which two different drivers may attempt to handle one device at the same time. Recent ACPI device enumeration rework extended that approach to ACPI PNP devices by starting to use a scan handler for enumerating them. However, we previously allowed ACPI drivers to bind to ACPI device objects with existing PNP device companions and changing that led to functional regressions on some systems. For this reason, add a special check for PNP devices in acpi_device_probe() so that ACPI drivers can bind to ACPI device objects having existing PNP device companions as before. Fixes: eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) Link: https://bugzilla.kernel.org/show_bug.cgi?id=81511 Link: https://bugzilla.kernel.org/show_bug.cgi?id=81971 Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Reported-by: Dirk Griesbach <spamthis@freenet.de> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-14Merge tag 'pm+acpi-3.17-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are a couple of regression fixes, cpuidle menu governor optimizations, fixes for ACPI proccessor and battery drivers, hibernation fix to avoid problems related to the e820 memory map, fixes for a few cpufreq drivers and a new version of the suspend profiling tool analyze_suspend.py. Specifics: - Fix for an ACPI-based device hotplug regression introduced in 3.14 that causes a kernel panic to trigger when memory hot-remove is attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen - Fix for a cpufreq regression introduced in 3.16 that triggers a "sleeping function called from invalid context" bug in dev_pm_opp_init_cpufreq_table() from Stephen Boyd - ACPI battery driver fix for a warning message added in 3.16 that prints silly stuff sometimes from Mariusz Ceier - Hibernation fix for safer handling of mismatches in the 820 memory map between the configurations during image creation and during the subsequent restore from Chun-Yi Lee - ACPI processor driver fix to handle CPU hotplug notifications correctly during system suspend/resume from Lan Tianyu - Series of four cpuidle menu governor cleanups that also should speed it up a bit from Mel Gorman - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann and Uwe Kleine-König - Version 3.0 of the analyze_suspend.py suspend profiling tool from Todd E Brandt" * tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Fix warning message in acpi_battery_get_state() PM / tools: analyze_suspend.py: update to v3.0 cpufreq: arm_big_little: fix module license spec cpufreq: speedstep-smi: fix decimal printf specifiers ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove() cpufreq: OPP: Avoid sleeping while atomic cpufreq: cpu0: Do not print error message when deferring cpufreq: integrator: Use set_cpus_allowed_ptr PM / hibernate: avoid unsafe pages in e820 reserved regions ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events cpuidle: menu: Lookup CPU runqueues less cpuidle: menu: Call nr_iowait_cpu less times cpuidle: menu: Use ktime_to_us instead of reinventing the wheel cpuidle: menu: Use shifts when calculating averages where possible
2014-08-13Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/apic updates from Thomas Gleixner: "This is a major overhaul to the x86 apic subsystem consisting of the following parts: - Remove obsolete APIC driver abstractions (David Rientjes) - Use the irqdomain facilities to dynamically allocate IRQs for IOAPICs. This is a prerequisite to enable IOAPIC hotplug support, and it also frees up wasted vectors (Jiang Liu) - Misc fixlets. Despite the hickup in Ingos previous pull request - caused by the missing fixup for the suspend/resume issue reported by Borislav - I strongly recommend that this update finds its way into 3.17. Some history for you: This is preparatory work for physical IOAPIC hotplug. The first attempt to support this was done by Yinghai and I shot it down because it just added another layer of obscurity and complexity to the already existing mess without tackling the underlying shortcomings of the current implementation. After quite some on- and offlist discussions, I requested that the design of this functionality must use generic infrastructure, i.e. irq domains, which provide all the mechanisms to dynamically map linux interrupt numbers to physical interrupts. Jiang picked up the idea and did a great job of consolidating the existing interfaces to manage the x86 (IOAPIC) interrupt system by utilizing irq domains. The testing in tip, Linux-next and inside of Intel on various machines did not unearth any oddities until Borislav exposed it to one of his oddball machines. The issue was resolved quickly, but unfortunately the fix fell through the cracks and did not hit the tip tree before Ingo sent the pull request. Not entirely Ingos fault, I also assumed that the fix was already merged when Ingo asked me whether he could send it. Nevertheless this work has a proper design, has undergone several rounds of review and the final fallout after applying it to tip and integrating it into Linux-next has been more than moderate. It's the ground work not only for IOAPIC hotplug, it will also allow us to move the lowlevel vector allocation into the irqdomain hierarchy, which will benefit other architectures as well. Patches are posted already, but they are on hold for two weeks, see below. I really appreciate the competence and responsiveness Jiang has shown in course of this endavour. So I'm sure that any fallout of this will be addressed in a timely manner. FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA will have a look at the hopefully zero fallout until I'm back" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation x86/apic/vsmp: Make is_vsmp_box() static x86, apic: Remove enable_apic_mode callback x86, apic: Remove setup_portio_remap callback x86, apic: Remove multi_timer_check callback x86, apic: Replace noop_check_apicid_used x86, apic: Remove check_apicid_present callback x86, apic: Remove mps_oem_check callback x86, apic: Remove smp_callin_clear_local_apic callback x86, apic: Replace trampoline physical addresses with defaults x86, apic: Remove x86_32_numa_cpu_node callback x86: intel-mid: Use the new io_apic interfaces x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box() x86, irq: Clean up irqdomain transition code x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled x86, irq, SFI: Release IOAPIC pin when PCI device is disabled x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled x86, irq: Introduce helper functions to release IOAPIC pin x86, irq: Simplify the way to handle ISA IRQ ...
2014-08-10Merge branches 'acpi-processor', 'acpi-hotplug' and 'acpi-battery'Rafael J. Wysocki
* acpi-processor: ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events * acpi-hotplug: ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove() * acpi-battery: ACPI / battery: Fix warning message in acpi_battery_get_state()
2014-08-10ACPI / battery: Fix warning message in acpi_battery_get_state()Mariusz Ceier
capacity_now should be assigned after comparing it to design_capacity. Otherwise warning is printed even when capacity_now before assignment is equal to design_capacity, making the check useless and "current charge level" wrong (it should be higher than, not equal to, "maximum charge level", which is full_charge_capacity): "battery: reported current charge level (56410) is higher than reported maximum charge level (56410)." Fixes: 232de5143790 (ACPI / battery: fix wrong value of capacity_now reported when fully charged) Signed-off-by: Mariusz Ceier <mceier+kernel@gmail.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-08x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernationJiang Liu
Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins. We need to keep IRQ assignment for PCI devices during suspend/hibernation, otherwise it may cause failure of suspend/hibernation due to: 1) Device driver calls pci_enable_device() to allocate an IRQ number and register interrupt handler on the returned IRQ. 2) Device driver's suspend callback calls pci_disable_device() and release assigned IRQ in turn. 3) Device driver's resume callback calls pci_enable_device() to allocate IRQ number again. A different IRQ number may be assigned by IOAPIC driver this time. 4) Now the hardware delivers interrupt to the new IRQ but interrupt handler is still registered against the old IRQ, so it breaks suspend/hibernation. To fix this issue, we keep IRQ assignment during suspend/hibernation. Flag pci_dev.dev.power.is_prepared is used to detect that pci_disable_device() is called during suspend/hibernation. Reported-and-Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1407478071-29399-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-08-07ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()Tang Chen
When ACPI_HOTPLUG_MEMORY is not configured, memory_device_handler.attach is not set. In acpi_scan_attach_handler(), the acpi_device->handler will not be initialized. In acpi_scan_hot_remove(), it doesn't check if acpi_device->handler is NULL. If we do memory hot-remove without ACPI_HOTPLUG_MEMORY configured, the kernel will panic. BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4 PGD 0 Oops: 0000 [#1] SMP Modules linked in: sd_mod(E) sr_mod(E) cdrom(E) crc_t10dif(E) crct10dif_common(E) ata_piix(E) libata(E) CPU: 0 PID: 41 Comm: kworker/u2:1 Tainted: G E 3.16.0-rc7--3.16-rc7-tangchen+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Workqueue: kacpi_hotplug acpi_hotplug_work_fn task: ffff8800182436c0 ti: ffff880018254000 task.ti: ffff880018254000 RIP: 0010:[<ffffffff813e318f>] [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4 RSP: 0000:ffff880018257da8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88001cd8d800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88001e40e6f8 RDI: 0000000000000246 RBP: ffff880018257df0 R08: 0000000000000096 R09: 00000000000011a0 R10: 63735f6970636120 R11: 725f746f685f6e61 R12: 0000000000000003 R13: ffff88001cc1c400 R14: ffff88001e062028 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff88001e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000088 CR3: 000000001a9a2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Stack: 00000000523cab58 ffff88001cd8d9f8 ffff88001852d480 00000000523cab58 ffff88001852d480 ffff880018221e40 ffff88001cc1c400 ffff88001cce2d00 0000000000000040 ffff880018257e08 ffffffff813dc31d ffff88001852d480 Call Trace: [<ffffffff813dc31d>] acpi_hotplug_work_fn+0x1e/0x29 [<ffffffff8108eefb>] process_one_work+0x17b/0x460 [<ffffffff8108f69d>] worker_thread+0x11d/0x5b0 [<ffffffff8108f580>] ? rescuer_thread+0x3a0/0x3a0 [<ffffffff81096811>] kthread+0xe1/0x100 [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0 [<ffffffff816cc6bc>] ret_from_fork+0x7c/0xb0 [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0 This patch fixes this problem by checking if acpi_device->handler is NULL in acpi_scan_hot_remove(). Fixes: d22ddcbc4fb7 (ACPI / hotplug: Add demand_offline hotplug profile flag) Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-06Merge tag 'pm+acpi-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18 commits) and system suspend/hibernation (9 commits). From the new code perspective, the ACPICA update brings ACPI 5.1 to the table, including a new device configuration object called _DSD (Device Specific Data) that will hopefully help us to operate device properties like Device Trees do (at least to some extent) and changes related to supporting ACPI on ARM. Apart from that we have hibernation changes making it use radix trees to store memory bitmaps which should speed up some operations carried out by it quite significantly. We also have some power management changes related to suspend-to-idle (the "freeze" sleep state) support and more preliminary changes needed to support ACPI on ARM (outside of ACPICA). The rest is fixes and cleanups pretty much everywhere. Specifics: - ACPICA update to upstream version 20140724. That includes ACPI 5.1 material (support for the _CCA and _DSD predefined names, changes related to the DMAR and PCCT tables and ARM support among other things) and cleanups related to using ACPICA's header files. A major part of it is related to acpidump and the core code used by that utility. Changes from Bob Moore, David E Box, Lv Zheng, Sascha Wildner, Tomasz Nowicki, Hanjun Guo. - Radix trees for memory bitmaps used by the hibernation core from Joerg Roedel. - Support for waking up the system from suspend-to-idle (also known as the "freeze" sleep state) using ACPI-based PCI wakeup signaling (Rafael J Wysocki). - Fixes for issues related to ACPI button events (Rafael J Wysocki). - New device ID for an ACPI-enumerated device included into the Wildcat Point PCH from Jie Yang. - ACPI video updates related to backlight handling from Hans de Goede and Linus Torvalds. - Preliminary changes needed to support ACPI on ARM from Hanjun Guo and Graeme Gregory. - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui. - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros (Rafael J Wysocki). - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J Wysocki. - Cleanups and improvements related to system suspend from Lan Tianyu, Randy Dunlap and Rafael J Wysocki. - ACPI battery cleanup from Wei Yongjun. - cpufreq core fixes from Viresh Kumar. - Elimination of a deadband effect from the cpufreq ondemand governor and intel_pstate driver cleanups from Stratos Karafotis. - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas Patocka. - Fix for the imx6 cpufreq driver from Anson Huang. - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep Tripathy and Mohammad Merajul Islam Molla. - Build fix for the big_little cpuidle driver from Sachin Kamat. - Configuration fix for the Operation Performance Points (OPP) framework from Mark Brown. - APM cleanup from Jean Delvare. - cpupower utility fixes and cleanups from Peter Senna Tschudin, Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger" * tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits) ACPI / LPSS: add LPSS device for Wildcat Point PCH ACPI / PNP: Replace faulty is_hex_digit() by isxdigit() ACPICA: Update version to 20140724. ACPICA: ACPI 5.1: Update for PCCT table changes. ACPICA/ARM: ACPI 5.1: Update for GTDT table changes. ACPICA/ARM: ACPI 5.1: Update for MADT changes. ACPICA/ARM: ACPI 5.1: Update for FADT changes. ACPICA: ACPI 5.1: Support for the _CCA predifined name. ACPICA: ACPI 5.1: New notify value for System Affinity Update. ACPICA: ACPI 5.1: Support for the _DSD predefined name. ACPICA: Debug object: Add current value of Timer() to debug line prefix. ACPICA: acpihelp: Add UUID support, restructure some existing files. ACPICA: Utilities: Fix local printf issue. ACPICA: Tables: Update for DMAR table changes. ACPICA: Remove some extraneous printf arguments. ACPICA: Update for comments/formatting. No functional changes. ACPICA: Disassembler: Add support for the ToUUID opererator (macro). ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro. ACPICA: Work around an ancient GCC bug. ACPI / processor: Make it possible to get local x2apic id via _MAT ...
2014-08-06ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN eventsLan Tianyu
CPU hotplug happens during S2RAM and CPU notify event will be CPU_XXX_FROZEN. acpi_cpu_soft_notify() ignores to check these events. This also may make acpi_cpu_soft_notify() fall into sleep during CPU_DYING/STARTING_FROZEN events which don't allow callbacks to sleep. This patch is to fix it. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-05Merge branches 'acpi-video', 'acpi-battery', 'acpi-processor' and 'acpi-lpss'Rafael J. Wysocki
* acpi-video: ACPI / video: Add use_native_backlight quirk for HP EliteBook 2014 models * acpi-battery: ACPI / battery: remove duplicated include from battery.c * acpi-processor: ACPI / processor: Make it possible to get local x2apic id via _MAT * acpi-lpss: ACPI / LPSS: add LPSS device for Wildcat Point PCH
2014-08-05Merge branch 'acpi-pnp'Rafael J. Wysocki
* acpi-pnp: ACPI / PNP: Replace faulty is_hex_digit() by isxdigit() ACPI / PNP: Fix acpi_pnp_match()
2014-08-05Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20140724. ACPICA: ACPI 5.1: Update for PCCT table changes. ACPICA/ARM: ACPI 5.1: Update for GTDT table changes. ACPICA/ARM: ACPI 5.1: Update for MADT changes. ACPICA/ARM: ACPI 5.1: Update for FADT changes. ACPICA: ACPI 5.1: Support for the _CCA predifined name. ACPICA: ACPI 5.1: New notify value for System Affinity Update. ACPICA: ACPI 5.1: Support for the _DSD predefined name. ACPICA: Debug object: Add current value of Timer() to debug line prefix. ACPICA: acpihelp: Add UUID support, restructure some existing files. ACPICA: Utilities: Fix local printf issue. ACPICA: Tables: Update for DMAR table changes. ACPICA: Remove some extraneous printf arguments. ACPICA: Update for comments/formatting. No functional changes. ACPICA: Disassembler: Add support for the ToUUID opererator (macro). ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro. ACPICA: Work around an ancient GCC bug.
2014-08-01ACPI / LPSS: add LPSS device for Wildcat Point PCHJie Yang
INT3438 is the ADSP device on Wildcat Point platform with 2 DW DMA engines built In. The DMA engines are used for DSP FW loading and audio data transferring. These DMA engine probing need the clock, without it, probing may failed and can't go forward. Add LPSS device "INT3438" for Wildcat Point PCH, to provide clock for its ADSP DMA engine probing. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()Arjun Sreedharan
0 is ascii for NULL. Hex digit matching should be from '0'. Faulty version returns true for #,$,%,& etc. Signed-off-by: Arjun Sreedharan <arjun024@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: ACPI 5.1: Support for the _CCA predifined name.Bob Moore
Full support for _CCA. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: ACPI 5.1: New notify value for System Affinity Update.Bob Moore
New value for the Notify() operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: ACPI 5.1: Support for the _DSD predefined name.David E. Box
Adds full support for _DSD. David Box. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: Debug object: Add current value of Timer() to debug line prefix.Bob Moore
Simplifies timing of things like control method execution. [zetalog: fixing 64-bit division link error] Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: acpihelp: Add UUID support, restructure some existing files.Bob Moore
This adds a -u option to acpi_help to display all known ACPI UUIDs. Some existing files in the core code have been restructured. Three new files. [zetalog: changing drivers/acpi/acpica/Makefile accordingly] Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: Utilities: Fix local printf issue.Lv Zheng
The bug can be reproduced by using a format that do not have the width.prec specified after a format that have the width.prec specified. The second formatted output will be wrong. The root cause is acpi_ut_vsnprintf() doesn't reset the specifiers to the default values. This patch fixes this issue. BZ 1094. Reported by Yizhe Wang, fixed by Lv Zheng. Since acpi_ut_vprintf() is only enabled for specific OSPM now, this patch doesn't affect Linux kernel. Link: https://bugs.acpica.org/show_bug.cgi?id=1094 Reported-and-tested-by: Yizhe Wang <yizhe.wang@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: Remove some extraneous printf arguments.Sascha Wildner
Arguments that have no associated % format specifier. Apparently these are not caught by any current compilers. ACPICA BZ 1090. Sascha Wildner. Currently, this patch only affects applications under the toos/power/acpi folder. Link: https://bugs.acpica.org/show_bug.cgi?id=1090 Signed-off-by: Sascha Wildner <swildner@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: Update for comments/formatting. No functional changes.Bob Moore
Fix some issues detected by acpisrc utility. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: Disassembler: Add support for the ToUUID opererator (macro).Bob Moore
This change adds support to disassemble a UUID back to the original ToUUID operator. It will detect a UUID within a standard AML Buffer. Also, a description of the UUID is emitted for "known" UUIDs, defined as UUIDs that are defined in the ACPI specification. Since this is a change for disassembler which is not shipped in the Linux kernel, the Linux kernel is not affected. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-31ACPICA: Work around an ancient GCC bug.Bob Moore
warning: cast from function call of type 'char *' to non-matching type 'long unsigned int' Since acpi_ut_format_number() hasn't been enabled for the Linux kernel, this patch doesn't affect the Linux kernel. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30Merge tag 'please-pull-apei' into x86/rasH. Peter Anvin
APEI is currently implemented so that it depends on x86 hardware. The primary dependency is that GHES uses the x86 NMI for hardware error notification and MCE for memory error handling. These patches remove that dependency. Other APEI features such as error reporting via external IRQ, error serialization, or error injection, do not require changes to use them on non-x86 architectures. The following patch set eliminates the APEI Kconfig x86 dependency by making these changes: - treat NMI notification as GHES architecture - HAVE_ACPI_APEI_NMI - group and wrap around #ifdef CONFIG_HAVE_ACPI_APEI_NMI code which is used only for NMI path - identify architectural boxes and abstract it accordingly (tlb flush and MCE) - rework ioremap for both IRQ and NMI context NMI code is kept in ghes.c file since NMI and IRQ context are tightly coupled. Note, these patches introduce no functional changes for x86. The NMI notification feature is hard selected for x86. Architectures that want to use this feature should also provide NMI code infrastructure.
2014-07-30ACPI / processor: Make it possible to get local x2apic id via _MATHanjun Guo
Logical processors with APIC ID values of 255 and greater are required to have a Processor Device object and must convey the processor's APIC information to OSPM using the Processor Local X2APIC structure, but not until ACPI 5.1, X2APIC structure was not supported in _MAT method. _MAT is needed for CPU hotplug and system with more than 255 CPUs will definitely need X2APIC structure, so add its support in map_mat_entry() to make it possible to get local x2apic id via _MAT based on ACPI 5.1. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30ACPI / battery: remove duplicated include from battery.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30ACPI / video: Add use_native_backlight quirk for HP EliteBook 2014 modelsHans de Goede
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1123565 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30Merge back earlier acpi-pnp material.Rafael J. Wysocki
Conflicts: drivers/pnp/pnpacpi/core.c
2014-07-27Merge branches 'acpi-video' and 'acpi-hotplug'Rafael J. Wysocki
* acpi-video: ACPI: move models with win8 brightness problems from win8 blacklist to use_native_backlight ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress * acpi-hotplug: ACPI / hotplug / PCI: Fix sparse non static symbol warning ACPI / hotplug: Simplify acpi_set_hp_context() ACPI / hotplug / PCI: Eliminate acpiphp_dev_to_bridge()
2014-07-27Merge branches 'acpi-pnp' and 'acpi-pci'Rafael J. Wysocki
* acpi-pnp: ACPI / PNP: Use ACPI_COMPANION() instead of ACPI_HANDLE() ACPI / PNP: do ACPI binding directly * acpi-pci: ACPI / PCI: Use ACPI_COMPANION() instead of ACPI_HANDLE()
2014-07-27Merge branches 'acpi-pm', 'acpi-sleep' and 'acpi-button'Rafael J. Wysocki
* acpi-pm: ACPI / PM: Use ACPI_COMPANION() instead of ACPI_HANDLE() ACPI / PM: Always enable wakeup GPEs when enabling device wakeup ACPI / PM: Revork the handling of ACPI device wakeup notifications PM: Create PM workqueue if runtime PM is not configured too * acpi-sleep: ACPI / sleep: Do not save NVS for new machines to accelerate S3 * acpi-button: ACPI / button: Do not propagate wakeup-from-suspend events
2014-07-27Merge branch 'acpi-gpe'Rafael J. Wysocki
* acpi-gpe: ACPI / scan: No implicit wake notification for buttons
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 20:50:12 +0000