summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2012-04-20Revert "ACPI: ignore FADT reset-reg-sup flag"Linus Torvalds
This reverts commit cf450136bfde77c7f95065c91bffded4aa7fa731. It breaks reboot on at least one Thinkpad T43, as reported by Jörg Otte: "On reboot it shuts down as normal. The last lines displayed are: >Unmounting temporary filesystems.. [OK] >Deactivating swap... [OK] >Unmounting local filesystems... [OK] >Will now restart > Restarting system Then I hear it accessing the cd-drive, but then it's being stuck." Jörg bisected the regression to this commit. That commit fixes another machine (see https://bugzilla.kernel.org/show_bug.cgi?id=11533 for details) that has a BIOS bug and doesn't support ACPI reset. However, at least one of those other reporters no longer even has the machine in question, and had a different workaround to begin with. Besides, it clearly was a buggy BIOS. Let's not break the correct case to fix that case. Reported-and-bisected-by: Jörg Otte <jrg.otte@googlemail.com> Cc: linux-acpi@vger.kernel.org Cc: Len Brown <lenb@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-18Revert "ACPI: Make ACPI interrupt threaded"Thomas Gleixner
This reverts commit 6fe0d0628245fdcd6fad8b837c81e8f7ebc3364d. Paul bisected this regression. The conversion was done blindly and is wrong, as it does not provide a primary handler to disable the level type irq on the device level. Neither does it set the IRQF_ONESHOT flag which handles that at the irq line level. This can't be done as the interrupt might be shared, though we might extend the core to force it. So an interrupt on this line will wake up the thread, but immediately unmask the irq after that. Due to the interrupt being level type the hardware interrupt is raised over and over and prevents the irq thread from handling it. Fail. request_irq() unfortunately does not refuse such a request and the patch was obviously never tested with real interrupts. Bisected-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-06Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management patches from Len Brown: "Two fixes for cpuidle merge-window changes, plus a URL fix in MAINTAINERS" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: MAINTAINERS: Update git url for ACPI cpuidle: Fix panic in CPU off-lining with no idle driver ACPI processor: Use safe_halt() rather than halt() in acpi_idle_play_dead()
2012-04-06Merge branches 'idle-fix' and 'misc' into releaseLen Brown
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05ACPI processor: Use safe_halt() rather than halt() in acpi_idle_play_dead()Luck, Tony
ACPI code is shared by arch/x86 and arch/ia64. ia64 doesn't provide a plain "halt()" function. Use safe_halt() instead. Signed-off-by: Tony Luck <tony.luck@intel.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management changes from Len Brown: - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup - cpuidle evolving, more ARM use - thermal sub-system evolving, ditto - assorted other PM bits Fix up conflicts in various cpuidle implementations due to ARM cpuidle cleanups (ARM at91 self-refresh and cpu idle code rewritten into "standby" in asm conflicting with the consolidation of cpuidle time keeping), trivial SH include file context conflict and RCU tracing fixes in generic code. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits) ACPI throttling: fix endian bug in acpi_read_throttling_status() Disable MCP limit exceeded messages from Intel IPS driver ACPI video: Don't start video device until its associated input device has been allocated ACPI video: Harden video bus adding. ACPI: Add support for exposing BGRT data ACPI: export acpi_kobj ACPI: Fix logic for removing mappings in 'acpi_unmap' CPER failed to handle generic error records with multiple sections ACPI: Clean redundant codes in scan.c ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() ACPI: consistently use should_use_kmap() PNPACPI: Fix device ref leaking in acpi_pnp_match ACPI: Fix use-after-free in acpi_map_lsapic ACPI: processor_driver: add missing kfree ACPI, APEI: Fix incorrect APEI register bit width check and usage Update documentation for parameter *notrigger* in einj.txt ACPI, APEI, EINJ, new parameter to control trigger action ACPI, APEI, EINJ, limit the range of einj_param ACPI, APEI, Fix ERST header length check cpuidle: power_usage should be declared signed integer ...
2012-03-30Merge branch 'tboot' into releaseLen Brown
Conflicts: drivers/acpi/acpica/hwsleep.c Text conflict between: 2feec47d4c5f80b05f1650f5a24865718978eea4 (ACPICA: ACPI 5: Support for new FADT SleepStatus, SleepControl registers) which removed #include "actables.h" and 09f98a825a821f7a3f1b162f9ed023f37213a63b (x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep.) which removed #include <linux/tboot.h> The resolution is to remove them both. Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30Merge branch 'd3' into releaseLen Brown
Conflicts: drivers/acpi/sleep.c This was a text conflict between a2ef5c4fd44ce3922435139393b89f2cce47f576 (ACPI: Move module parameter gts and bfs to sleep.c) which added #include <linux/module.h> and b24e5098853653554baf6ec975b9e855f3d6e5c0 (ACPI, PCI: Move acpi_dev_run_wake() to ACPI core) which added #include <linux/pm_runtime.h> The resolution was to take them both. Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30Merge branch 'apei' into releaseLen Brown
Conflicts: drivers/acpi/apei/apei-base.c This was a conflict between 15afae604651d4e17652d2ffb56f5e36f991cfef (CPI, APEI: Fix incorrect APEI register bit width check and usage) and 653f4b538f66d37db560e0f56af08117136d29b7 (ACPICA: Expand OSL memory read/write interfaces to 64 bits) The former changed a parameter in the call to acpi_os_read_memory64() and the later replaced all calls to acpi_os_read_memory64() with calls to acpi_os_read_memory(). Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30Merge branches 'acpica', 'bgrt', 'bz-11533', 'cpuidle', 'ec', 'hotplug', ↵Len Brown
'misc', 'red-hat-bz-727865', 'thermal', 'throttling', 'turbostat' and 'video' into release Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI throttling: fix endian bug in acpi_read_throttling_status()Dan Carpenter
Using a u64 here creates an endian bug. We store a u32 number in the top byte which is a larger number than intended on big endian systems. There is no reason to use a 64 bit data type here, I guess it was just an oversight. I removed the initialization to zero as well. It's needed with a u64 but with a u32, the variable gets initialized properly inside the call to acpi_os_read_port(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI video: Don't start video device until its associated input device has ↵Igor Murzov
been allocated Quoth Dmitry Torokhov: In addition to bus notifier we do install device notifier explicitly so it might fire up early. The easiest fox would be to move acpi_video_bus_start_devices() after input_allocate_device() but before input_register_device() - unregistered input devices can handle input_event() calls just fine. May fix crashes reported in: https://bugzilla.kernel.org/show_bug.cgi?id=40672 Signed-off-by: Igor Murzov <e-mail@date.by> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI video: Harden video bus adding.Igor Murzov
It is always better to check return values, so add some new checks and correct existing ones. v2: Be consistent and don't mix errors from -E* and AE_* namespaces. Signed-off-by: Igor Murzov <e-mail@date.by> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Add support for exposing BGRT dataMatthew Garrett
ACPI 5.0 adds the BGRT, a table that contains a pointer to the firmware boot splash and associated metadata. This simple driver exposes it via /sys/firmware/acpi in order to allow bootsplash applications to draw their splash around the firmware image and reduce the number of jarring graphical transitions during boot. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: export acpi_kobjMatthew Garrett
Drivers may wish to add entries to /sys/firmware/acpi, so export acpi_kobj in order to let them do that. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Fix logic for removing mappings in 'acpi_unmap'Myron Stowe
Make sure the removal of mappings uses the same logic that put the mappings in place. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30CPER failed to handle generic error records with multiple sectionsJiang Liu
The function apei_estatus_print() and apei_estatus_check() forget to move ahead the gdata pointer when dealing with multiple generic error data sections. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Clean redundant codes in scan.cAlex He
Clean the redundant codes of apci_bus_get_power_flags(). Signed-off-by: Alex He <alex.he@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed()Paul E. McKenney
The acpi_processor_cst_has_changed() function is invoked from a CPU_ONLINE or CPU_DEAD function, which might well execute on CPU 0 even though the CPU being hotplugged is some other CPU. In addition, acpi_processor_cst_has_changed() invokes smp_processor_id() without protection, resulting in splats when onlining CPUs. This commit therefore changes the smp_processor_id() to pr->id, as is used elsewhere in the code, for example, in acpi_processor_add(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: consistently use should_use_kmap()Jan Beulich
... so that acpi_unmap()'s behavior gets in sync with acpi_map()'s. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: processor_driver: add missing kfreeJulia Lawall
The function acpi_processor_add is stored in the ops.add field of a acpi_driver structure. This function is then called in acpi_bus_driver_init. On failure, this function clears the field device->driver_data, but does not free its contents. Thus the free has to be done by the add function. In acpi_processor_add, the corresponding value is pr. This value is currently freed on failure before storing it in device->driver_data, but not after. This free is added in the error handling code at the end of the function. The per_cpu variable processors is also cleared so that it does not refer to a dangling pointer. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI, APEI: Fix incorrect APEI register bit width check and usageGary Hade
The current code incorrectly assumes that (1) the APEI register bit width is always 8, 16, 32, or 64 and (2) the APEI register bit width is always equal to the APEI register access width. ERST serialization instructions entries such as: [030h 0048 1] Action : 00 [Begin Write Operation] [031h 0049 1] Instruction : 03 [Write Register Value] [032h 0050 1] Flags (decoded below) : 01 Preserve Register Bits : 1 [033h 0051 1] Reserved : 00 [034h 0052 12] Register Region : [Generic Address Structure] [034h 0052 1] Space ID : 00 [SystemMemory] [035h 0053 1] Bit Width : 03 [036h 0054 1] Bit Offset : 00 [037h 0055 1] Encoded Access Width : 03 [DWord Access:32] [038h 0056 8] Address : 000000007F2D7038 [040h 0064 8] Value : 0000000000000001 [048h 0072 8] Mask : 0000000000000007 break this assumption by yielding: [Firmware Bug]: APEI: Invalid bit width in GAR [0x7f2d7038/3/0] I have found no ACPI specification requirements corresponding with the above assumptions. There is even a good example in the Serialization Instruction Entries section (ACPI 4.0 section 17.4,1.2, ACPI 4.0a section 2.5.1.2, ACPI 5.0 section 18.5.1.2) that mentions a serialization instruction with a bit range of [6:2] which is 5 bits wide, _not_ 8, 16, 32, or 64 bits wide. Compile and boot tested with 3.3.0-rc7 on a IBM HX5. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI, APEI, EINJ, new parameter to control trigger actionChen Gong
Some APEI firmware implementation will access injected address specified in param1 to trigger the error when injecting memory error, which means if one SRAR error is injected, the crash always happens because it is executed in kernel context. This new parameter can disable trigger action and control is taken over by the user. In this way, an SRAR error can happen in user context instead of crashing the system. This function is highly depended on BIOS implementation so please ensure you know the BIOS trigger procedure before you enable this switch. v2: notrigger should be created together with param1/param2 Tested-by: Tony Luck <tony.luck@lintel.com> Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI, APEI, EINJ, limit the range of einj_paramChen Gong
On the platforms with ACPI4.x support, parameter extension is not always doable, which means only parameter extension is enabled, einj_param can take effect. v2->v1: stopping early in einj_get_parameter_address for einj_param Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI, APEI, Fix ERST header length checkJiang Liu
This fixes a trivial copy & paste error in ERST header length check. It's just for future safety because sizeof(struct acpi_table_einj) equals to sizeof(struct acpi_table_erst) with current ACPI5.0 specification. It applies to v3.3-rc6. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30idle, x86: Allow off-lined CPU to enter deeper C statesBoris Ostrovsky
Currently when a CPU is off-lined it enters either MWAIT-based idle or, if MWAIT is not desired or supported, HLT-based idle (which places the processor in C1 state). This patch allows processors without MWAIT support to stay in states deeper than C1. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Add CPU hotplug support for processor device objectsToshi Kani
acpi_processor_install_hotplug_notify() registers processor objects to receive ACPI CPU hotplug event notifications. This patch additionally registers processor device objects (ACPI0007) to receive the notifications as well. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI / PM: print physical addresses consistently with other parts of kernelBjorn Helgaas
Print physical address info in a style consistent with the %pR style used elsewhere in the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Evaluate thermal trip points before reading temperatureMatthew Garrett
An HP laptop (Pavilion G4-1016tx) has the following code in _TMP: Store (\_SB.PCI0.LPCB.EC0.RTMP, Local0) If (LGreaterEqual (Local0, S4TP)) { Store (One, HTS4) } S4TP is initialised at 0 and not programmed further until either _HOT or _CRT is called. If we evaluate _TMP before the trip points then HTS4 will always be set, causing the firmware to generate a message on boot complaining that the system shut down because of overheating. The simplest solution is just to reverse the checking of trip points and _TMP in thermal init. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI, PCI: Move acpi_dev_run_wake() to ACPI coreLin Ming
acpi_dev_run_wake() is a generic function which can be used by other subsystem too. Rename it to acpi_pm_device_run_wake, to be consistent with acpi_pm_device_sleep_wake. Then move it to ACPI core. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Add interface to register/unregister device to/from power resourcesLin Ming
Devices may share same list of power resources in _PR0, for example Device(Dev0) { Name (_PR0, Package (0x01) { P0PR, P1PR }) } Device(Dev1) { Name (_PR0, Package (0x01) { P0PR, P1PR } } Assume Dev0 and Dev1 were runtime suspended. Then Dev0 is resumed first and it goes into D0 state. But Dev1 is left in D0_Uninitialised state. This is wrong. In this case, Dev1 must be resumed too. In order to hand this case, each power resource maintains a list of devices which relies on it. When power resource is ON, it will check if the devices on its list can be resumed. The device can only be resumed when all the power resouces of its _PR0 are ON. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Introduce ACPI D3_COLD state supportZhang Rui
If a device has _PR3, it means the device supports D3_COLD. Add the ability to validate and enter D3_COLD state in ACPI. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPICA: Object repair code: Support to add Package wrappersBob Moore
Repair a common problem with objects that are defined to return a variable-length Package of sub-objects. If there is only one sub-object, some BIOS code mistakenly simply declares the single object instead of a Package with one sub-object. This function attempts to repair this error by wrapping a Package object around the original object, creating the correct and expected Package with one sub-object. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Make ACPI interrupt threadedAndi Kleen
Some ACPI interrupt actions may need to wait, and it's easiest to have a thread context for this. So turn the ACPI interrupt into a threaded interrupt. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: ec: Do request_region outside WARN()Andi Kleen
WARN() is not supposed to have side effects, so move the request_regions outside. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "Some significant updates to samsung-laptop, additional hardware support for Toshibas, misc updates to various hardware and a new backlight driver for some Apple machines." Fix up trivial conflicts: geode Geos update happening next to net5501 support, and MSIC thermal platform support added twice. * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (77 commits) acer-wmi: add quirk table for video backlight vendor mode drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() avoid NULL deref samsung-laptop: unregister ACPI video module for some well known laptops acer-wmi: No wifi rfkill on Sony machines thinkpad-acpi: recognize Lenovo as version string in newer V-series BIOS asus-wmi: don't update power and brightness when using scalar eeepc-wmi: split et2012 specific hacks eeepc-wmi: refine quirks handling asus-nb-wmi: set panel_power correctly asus-wmi: move WAPF variable into quirks_entry asus-wmi: store backlight power status for AIO machine asus-wmi: add scalar board brightness adj. support samsung-laptop: cleanup return type: mode_t vs umode_t drivers, samsung-laptop: fix usage of isalnum drivers, samsung-laptop: fix initialization of sabi_data in sabi_set_commandb asus-wmi: on/off bit is not set when reading the value eeepc-wmi: add extra keymaps for EP121 asus-nb-wmi: ignore useless keys acer-wmi: support Lenovo ideapad S205 Brazos wifi switch acer-wmi: fix out of input parameter size when set ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-26ACPI: Move module parameter gts and bfs to sleep.cLin Ming
Move linux specific module parameter gts and bfs out of ACPICA core code to sleep.c. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-26ACPICA: Sleep/Wake interfaces: optionally execute _GTS and _BFSLin Ming
Enhanced the sleep/wake interfaces to optionally execute the _GTS method (Going To Sleep), and the _BFS method (Back From Sleep). Windows apparently does not execute these methods, and therefore these methods are often untested. It has been seen on some systems where the execution of these methods causes errors and also prevents the machine from entering S5. It is therefore suggested that host operating systems do not execute these methods by default. In the future, perhaps these methods can be optionally executed based on the age of the system and/or what is the newest version of Windows that the BIOS asks for via _OSI. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPI: Do cpufreq clamping for throttling per package v2Andi Kleen
On Intel CPUs the processor typically uses the highest frequency set by any logical CPU. When the system overheats Linux first forces the frequency to the lowest available one to lower the temperature. However this was done only per logical CPU, which means all logical CPUs in a package would need to go through this before the frequency is actually lowered. Worse this delay actually prevents real throttling, because the real throttle code only proceeds when the lowest frequency is already reached. So when a throttle event happens force the lowest frequency for all CPUs in the package where it happened. The per CPU state is now kept per package, not per logical CPU. An alternative would be to do it per cpufreq unit, but since we want to bring down the temperature of the complete chip it's better to do it for all. In principle it may even make sense to do it for all CPUs, but I kept it on the package for now. With this change the frequency is actually lowered, which in terms also allows real throttling to proceed. I also removed an unnecessary per cpu variable initialization. v2: Fix package mapping Cc: <stable@vger.kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPICA: Debugger: Add missing object info to namespace dumpBob Moore
Many namespace node types must have an attached object. For these node types, print a message about a missing object during a namespace dump. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPICA: Change exception code for invalid pathname in acpi_evaluate_objectBob Moore
Change the returned exception code from AE_BAD_PARAMETER to the more appropriate AE_BAD_PATHNAME, when the input pathname to evaluate object is invalid. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPICA: Clarify METHOD_NAME* defines for full-pathname casesBob Moore
Changed the METHOD_NAME* defines that define a full pathname to the method to METHOD_PATHNAME* in order to make it clear that it is not a simple 4-character ACPI name. Used for the various sleep/wake methods. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPICA: Add table-driven dispatch for sleep/wake functionsBob Moore
Simplifies the code, especially the compile-time ACPI_REDUCED_HARDWARE option. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPICA: Split sleep/wake functions into two filesBob Moore
The functions for the original/legacy sleep/wake registers are in hwsleep.c, and the functions for the new extended FADT V5 sleep registers are in hwesleep.c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPICA: Distill multiple sleep method functions to a single functionBob Moore
Adds acpi_hw_execute_sleep_method to handle the various sleep methods such as _GTS, _BFS, _WAK, and _SST. Removes the specialized functions previously used for each of these methods. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPICA: Add acpi_os_physical_table_override interfaceBob Moore
This interface allows the host to override a table via a physical address, instead of the logical address required by acpi_os_table_override. This simplifies the host implementation. Initial implementation by Thomas Renninger. ACPICA implementation creates a single function for table overrides that attempts both a logical and a physical override. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>