| Age | Commit message (Collapse) | Author |
|---|
|
The following problem has been reported by George Kennedy:
Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail
in __free_pages_core()") the following use after free occurs
intermittently when ACPI tables are accessed.
BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
Read of size 4 at addr ffff8880be453004 by task swapper/0/1
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
Call Trace:
dump_stack+0xf6/0x158
print_address_description.constprop.9+0x41/0x60
kasan_report.cold.14+0x7b/0xd4
__asan_report_load_n_noabort+0xf/0x20
ibft_init+0x134/0xc49
do_one_initcall+0xc4/0x3e0
kernel_init_freeable+0x5af/0x66b
kernel_init+0x16/0x1d0
ret_from_fork+0x22/0x30
ACPI tables mapped via kmap() do not have their mapped pages
reserved and the pages can be "stolen" by the buddy allocator.
Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.
In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.
The other architectures using ACPI should not be affected by this
change.
Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/
Reported-by: George Kennedy <george.kennedy@oracle.com>
Tested-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
|
|
acpi_disabled, pointer id and table_header are checked in
acpi_table_parse_entries_array(), and acpi_parse_entries_array() is
only called by acpi_table_parse_entries_array(), so those checks in
acpi_parse_entries_array() are duplicate.
Remove those duplicated checks and move the table_size check to
acpi_table_parse_entries_array() as well.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On architectures that implement KASLR using the ELF native RELA relocation
format (such as arm64), every absolute reference in the code incurs an
overhead of 24 bytes in the .rela section. So storing a 41 element array
of 4 character signature strings using an array of pointer-to-char incurs
an 8x overhead (32 bytes per entry => ~1500 bytes), and given the fixed
length of the entries, and the fact that the array is only used locally,
it is much better to use an array of arrays here, which gets rid of the
overhead entirely.
While at it, make it __initconst, as it is never referenced except from
__init code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 422166b656565d180bb3aac712009bdce5e70cdd
NHLT (Non-HDAudio Link Table) provides configuration of audio
endpoints for Intel SST (Smart Sound Technology) DSP products.
Similarly to other ACPI tables, data provided by BIOS may not
describe it correctly, thus overriding is required.
ACPI override mechanism checks for unknown signature before
proceeding. Update known signatures array to support NHLT.
Link: https://github.com/acpica/acpica/commit/422166b6
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
|
|
>From the kernel documentation (initrd_table_override.txt):
If the ACPI_INITRD_TABLE_OVERRIDE compile option is true, it is possible
to override nearly any ACPI table provided by the BIOS with an
instrumented, modified one.
When lockdown is enabled, the kernel should disallow any unauthenticated
changes to kernel space. ACPI tables contain code invoked by the kernel,
so do not allow ACPI tables to be overridden if the kernel is locked down.
Signed-off-by: Linn Crosetto <lcrosetto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
cc: linux-acpi@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Thinkpad T Series expose a malformed BGRT table with Version field set
to 0. This fact prevents bootsplashes (as Plymouth) to correctly show
the manufacturer logo. This patch permits to override malformed BGRT
table with a correct one defined by the user.
Signed-off-by: Andrea Oliveri <oliveriandrea@gmail.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core/kobject updates from Greg KH:
"Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said
they should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here,
due to some changes to the kobject core code. Those too have all been
acked by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
kobject: clean up the kobject add documentation a bit more
kobject: Fix kernel-doc comment first line
kobject: Remove docstring reference to kset
firmware_loader: Fix a typo ("syfs" -> "sysfs")
kobject: fix dereference before null check on kobj
Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
init/config: Do not select BUILD_BIN2C for IKCONFIG
Provide in-kernel headers to make extending kernel easier
kobject: Improve doc clarity kobject_init_and_add()
kobject: Improve docs for kobject_add/del
driver core: platform: Fix the usage of platform device name(pdev->name)
livepatch: Replace klp_ktype_patch's default_attrs with groups
cpufreq: schedutil: Replace default_attrs field with groups
padata: Replace padata_attr_type default_attrs field with groups
irqdesc: Replace irq_kobj_type's default_attrs field with groups
net-sysfs: Replace ktype default_attrs field with groups
block: Replace all ktype default_attrs with groups
samples/kobject: Replace foo_ktype's default_attrs field with groups
kobject: Add support for default attribute groups to kobj_type
driver core: Postpone DMA tear-down until after devres release for probe failure
...
|
|
* acpi-scan:
ACPI / scan: Add labels for PNP button devices
ACPI / scan: Simplify acpi_bus_extract_wakeup_device_power_package()
* acpi-tables:
ACPI / tables: Clean up whitespace
* acpi-misc:
ACPI / DPTF: Use dev_get_drvdata()
ACPI: event: replace strcpy() by strscpy()
ACPI: Fix comment typos
* acpi-pm:
ACPI: PM: Print debug messages when enabling GPEs for wakeup
|
|
ACPICA commit 92ec0935f27e217dff0b176fca02c2ec3d782bb5
ACPI_COMPARE_NAME changed to ACPI_COMPARE_NAMESEG
This clarifies (1) this is a compare on 4-byte namesegs, not
a generic compare. Improves understanding of the code.
Link: https://github.com/acpica/acpica/commit/92ec0935
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Heterogeneous Memory Attribute Table (HMAT) header has different
field lengths than the existing parsing uses. Add the HMAT type to the
parsing rules so it may be generically parsed.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Parsing entries in an ACPI table had assumed a generic header
structure. There is no standard ACPI header, though, so less common
layouts with different field sizes required custom parsers to go through
their subtable entry list.
Create the infrastructure for adding different table types so parsing
the entries array may be more reused for all ACPI system tables and
the common code doesn't need to be duplicated.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup some whitespace to match the rest of the file. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In some scenario, we need to build initrd with kernel in a single image.
This can simplify system deployment process by downloading the whole system
once, such as in IC verification.
This patch adds support to override ACPI tables from built-in initrd.
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
[ rjw: Minor cleanups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Clang warns:
drivers/acpi/tables.c:715:14: warning: unused variable 'amlcode'
[-Wunused-variable]
static void *amlcode __attribute__ ((weakref("AmlCode")));
^
drivers/acpi/tables.c:716:14: warning: unused variable 'dsdt_amlcode'
[-Wunused-variable]
static void *dsdt_amlcode __attribute__ ((weakref("dsdt_aml_code")));
^
2 warnings generated.
The only uses of these variables are hiddem behind CONFIG_ACPI_CUSTOM_DSDT
so do the same thing here.
Fixes: 82e4eb4e9653 (ACPI / tables: add DSDT AmlCode new declaration name support)
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A new naming rule was added in ACPICA version 20180427 changing
the DSDT AML code name from "AmlCode" to "dsdt_aml_code".
That change was made by commit 83b2fa943ba8 "ACPICA: iASL: Enhance
the -tc option (create AML hex file in C)".
Tested:
ACPICA release version 20180427+.
ARM64: QCOM QDF2400
GCC: 4.8.5 20150623
Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Apart from the core arm64 and perf changes, the Spectre v4 mitigation
touches the arm KVM code and the ACPI PPTT support touches drivers/
(acpi and cacheinfo). I should have the maintainers' acks in place.
Summary:
- Spectre v4 mitigation (Speculative Store Bypass Disable) support
for arm64 using SMC firmware call to set a hardware chicken bit
- ACPI PPTT (Processor Properties Topology Table) parsing support and
enable the feature for arm64
- Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
primary motivation is Scalable Vector Extensions which requires
more space on the signal frame than the currently defined
MINSIGSTKSZ
- ARM perf patches: allow building arm-cci as module, demote
dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous
cleanups
- cmpwait() WFE optimisation to avoid some spurious wakeups
- L1_CACHE_BYTES reverted back to 64 (for performance reasons that
have to do with some network allocations) while keeping
ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual
hardware Cache Writeback Granule
- Turn LSE atomics on by default in Kconfig
- Kernel fault reporting tidying
- Some #include and miscellaneous cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits)
arm64: Fix syscall restarting around signal suppressed by tracer
arm64: topology: Avoid checking numa mask for scheduler MC selection
ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled
arm64: cpu_errata: include required headers
arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file
arm64: signal: Report signal frame size to userspace via auxv
arm64/sve: Thin out initialisation sanity-checks for sve_max_vl
arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID
arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests
arm64: KVM: Add ARCH_WORKAROUND_2 support for guests
arm64: KVM: Add HYP per-cpu accessors
arm64: ssbd: Add prctl interface for per-thread mitigation
arm64: ssbd: Introduce thread flag to control userspace mitigation
arm64: ssbd: Restore mitigation status on CPU resume
arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
arm64: ssbd: Add global mitigation state accessor
arm64: Add 'ssbd' command-line option
arm64: Add ARCH_WORKAROUND_2 probing
arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2
arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1
...
|
|
Add ACPI_SIG_PPTT to the table so initrd's can override the
system topology.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Geoffrey Blake <geoffrey.blake@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
I found the description of the table_size argument to the function
acpi_parse_entries_array() unclear and ambiguous. This is a minor
documentation change to improve that description so I don't misuse
the argument again in the future, and it is hopefully clearer to
other future users.
Signed-off-by: Al Stone <ahs3@redhat.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
These tables, NFIT and HMAT, are essential for describing
next-generation platform memory topologies and performance
characteristics. Allow them to be overridden for debug and test and
purposes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Loading IORT table from initrd can be used to fix severe firmware
IORT defects temporarily before platform/BIOS vendor releases an
upgraded BIOS binary.
Moreover, it is very powerful to debug SMMU node/device probe, MSI
allocation, stream id translation and IORT table from firmware.
It is also very useful to enable SMMU and devices behind SMMU before
firmware is ready.
This patch adds ACPI_SIG_IORT to the table, which enables IORT
from initrd to override which from firmware.
Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_gbl_verify_table_checksum
ACPICA commit 3d837b5d4b1033942b4d91c7d3801a09c3157918
acpi_gbl_verify_table_checksum is used to avoid validating (mapping) an entire
table in OS boot stage. 2nd "Reload" check in acpi_tb_install_standard_table()
is prepared for the same purpose. So this patch combines them together
using a renamed acpi_gbl_enable_table_validation flag. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/3d837b5d
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The biggest changes in this cycle were:
- reworking of the e820 code: separate in-kernel and boot-ABI data
structures and apply a whole range of cleanups to the kernel side.
No change in functionality.
- enable KASLR by default: it's used by all major distros and it's
out of the experimental stage as well.
- ... misc fixes and cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails
x86/reboot: Turn off KVM when halting a CPU
x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
x86: Enable KASLR by default
boot/param: Move next_arg() function to lib/cmdline.c for later reuse
x86/boot: Fix Sparse warning by including required header file
x86/boot/64: Rename start_cpu()
x86/xen: Update e820 table handling to the new core x86 E820 code
x86/boot: Fix pr_debug() API braindamage
xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h>
x86/boot/e820: Simplify e820__update_table()
x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures
x86/boot/e820: Fix and clean up e820_type switch() statements
x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix
x86/boot/e820: Remove unnecessary #include's
x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions()
x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*()
x86/boot/e820: Use bool in query APIs
x86/boot/e820: Document e820__reserve_setup_data()
x86/boot/e820: Clean up __e820__update_table() et al
...
|
|
Function acpi_parse_entries() is not used any more and if necessary,
acpi_table_parse_entries() can be used instead of it, so drop it.
Signed-off-by: Baoquan He <bhe@redhat.com>
[ rjw: Subject / changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We have these three related functions:
extern void e820_add_region(u64 start, u64 size, int type);
extern u64 e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type);
extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type, int checktype);
But it's not clear from the naming that they are 3 operations based around the
same 'memory range' concept. Rename them to better signal this, and move
the prototypes next to each other:
extern void e820__range_add (u64 start, u64 size, int type);
extern u64 e820__range_update(u64 start, u64 size, unsigned old_type, unsigned new_type);
extern u64 e820__range_remove(u64 start, u64 size, unsigned old_type, int checktype);
Note that this improved organization of the functions shows another problem that was easy
to miss before: sometimes the E820 entry type is 'int', sometimes 'unsigned int' - but this
will be fixed in a separate patch.
No change in functionality.
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove duplicated include.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_parse_entries()
The function acpi_parse_entries_array() has a limiting parameter,
max_entries, which tells the function to stop looking at subtables
once that limit has been reached. If the limit is reached, it is
reported. However, the logic is incorrect in that the loop to
examine all subtables will always report that zero subtables have
been ignored since it does not continue once the max_entries have
been reached.
One approach to fixing this would be to correct the logic so that
all subtables are examined, even if we have hit the max_entries, but
without executing all the callback functions. This could be risky
since we cannot guarantee that no callback will ever have side effects
that another callback depends on to work correctly.
So, the simplest approach is to just remove the part of the error
message that will always be incorrect.
Signed-off-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The acpi_parse_entries_array() function currently returns the very first
time there is any error found by one of the callback functions, or if one
of the callbacks returns a non-zero value. However, the ACPI subtables
being traversed could still have valid entries that could be used by one
of the callback functions. And, if the comments are correct, that is
what should happen -- always traverse all of the subtables, calling as
many of the callbacks as possible.
This patch makes the function consistent with its description so that it
will properly invoke all callbacks for all matching entries, for all
subtables, instead of stopping abruptly as it does today.
This does change the semantics of using acpi_parse_entries_array(). In
examining all users of the function, none of them rely on the current
behavior; that is, there appears to be no assumption that either all
subtables are traversed and all callbacks invoked, or that the function
will return immediately on any error from a callback. Each callback
operates independently. Hence, there should be no functional change
due to this change in semantics.
Future patches being prepared will rely on this new behavior; indeed,
they were written assuming the acpi_parse_entries_array() function
operated as its comments describe. For example, a callback that
counts the number of subtables of a specific type can now be assured
that as many subtables as possible have been enumerated.
Signed-off-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The static function acpi_parse_entries_array() is provided an array of
type struct acpi_subtable_proc that has a callback function and a count.
The count should reflect how many times the callback has been called.
However, the current code only increments the 0th element of the array,
regardless of the number of entries in the array, or which callback has
been invoked. The result is that we know the total number of callbacks
made but we cannot determine which callbacks were made, nor how often.
The fix is to index into the array of structs and increment the proper
counts.
There is one place in the x86 code for acpi_parse_madt_lapic_entries()
where the counts for each callback are used. If no LAPICs *and* no
X2APICs are found, an ENODEV is supposed to be returned; as it stands,
the count of X2APICs will always be zero, regardless of what is in the
MADT. Should there be no LAPICs, ENODEV will be returned in error, if
there are X2APICs in the MADT.
Otherwise, there are no other functional consequences of the count being
done as it currently is; all other uses simply check that the return value
from acpi_parse_entries_array() or passed back via its callers is either
non-zero, an error, or in one case just ignored.
In future patches, I will also need these counts to be correct; I need
to count the number of instances of subtables of certain types within
the MADT to determine whether or not an ACPI IORT is required or not,
and report when it is not present when it should be.
Signed-off-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The constant that defines max phys address where the new upgraded
ACPI table should be allocated is arch-specific. Move it to
<asm/acpi.h>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Refer initrd_start, initrd_end directly from drivers/acpi/tables.c.
This allows to use the table upgrade feature in architectures
other than x86. Also this simplifies header files.
The patch renames acpi_table_initrd_init() to acpi_table_upgrade()
(what reflects the purpose of the function) and removes the unneeded
wraps early_acpi_table_init() and early_initrd_acpi_init().
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The new memory allocated in acpi_table_initrd_init() is used to
copy the upgraded tables to it. So it should be mapped with
early_memunmap() instead of early_ioremap().
This is critical for ARM.
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 5ae74f2cc2f1 (ACPI / tables: Move table override mechanisms to
tables.c) forgot to move the CONFIG_ACPI_CUSTOM_DSDT_FILE inclusion
directive from osl.c to tables.c. Fix that.
Fixes: 5ae74f2cc2f1 (ACPI / tables: Move table override mechanisms to tables.c)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lv Zheng <lv.zheng@intel.com>
|
|
This patch converts the initrd table override mechanism to the table
upgrade mechanism by restricting its usage to the tables released with
compatibility and more recent revision.
This use case has been encouraged by the ACPI specification:
1. OEMID:
An OEM-supplied string that identifies the OEM.
2. OEM Table ID:
An OEM-supplied string that the OEM uses to identify the particular data
table. This field is particularly useful when defining a definition
block to distinguish definition block functions. OEM assigns each
dissimilar table a new OEM Table Id.
3. OEM Revision:
An OEM-supplied revision number. Larger numbers are assumed to be newer
revisions.
For OEMs, good practices will ensure consistency when assigning OEMID and
OEM Table ID fields in any table. The intent of these fields is to allow
for a binary control system that support services can use. Because many
support function can be automated, it is useful when a tool can
programatically determine which table release is a compatible and more
recent revision of a prior table on the same OEMID and OEM Table ID.
The facility can now be used by the vendors to upgrade wrong tables for bug
fixing purpose, thus lockdep disabling taint is not suitable for it and it
should be a default 'y' option to implement the spec encouraged use case.
Note that, by implementing table upgrade inside of ACPICA itself, it is
possible to remove acpi_table_initrd_override() and tables can be upgraded
by acpi_install_table() automatically. Though current ACPICA impelentation
hasn't implemented this, this patched changes the table flag setting timing
to allow this to be implemented in ACPICA without changing the code here.
Documentation of initrd override mechanism is upgraded accordingly.
Original-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch moves acpi_os_table_override() and
acpi_os_physical_table_override() to tables.c.
Along with the mechanisms, acpi_initrd_initialize_tables() is also moved to
tables.c to form a static function. The following functions are renamed
according to this change:
1. acpi_initrd_override() -> renamed to early_acpi_table_init(), which
invokes acpi_table_initrd_init()
2. acpi_os_physical_table_override() -> which invokes
acpi_table_initrd_override()
3. acpi_initialize_initrd_tables() -> renamed to acpi_table_initrd_scan()
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-ec:
ACPI / EC: Deny write access unless requested by module param
* acpi-fan:
ACPI / fan: Make struct dev_pm_ops const
* acpi-video:
ACPI / video: remove unused device_decode array
* acpi-misc:
ACPI / util: remove redundant check if element is NULL
ACPI: Add acpi_force_32bit_fadt_addr option to force 32 bit FADT addresses
drivers/acpi: make pmic/intel_pmic_crc.c explicitly non-modular
drivers/acpi: make apei/ghes.c more explicitly non-modular
drivers/acpi: make bgrt driver explicitly non-modular
|
|
This patch adds support to install tables from initrd.
If a table in the initrd wasn't used by the override mechanism,
the table would be installed after initializing all RSDT/XSDT
tables.
Link: https://lkml.org/lkml/2014/2/28/368
Reported-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some HP laptops seem to have invalid 64 bit FADT X_PM* addresses
which are causing various boot issues. In these cases, it would
be useful to force ACPI to use the valid legacy 32 bit equivalent
PM addresses. Add a acpi_force_32bit_fadt_addr to set the ACPICA
acpi_gbl_use32_bit_fadt_addresses to TRUE to force this override.
Link: https://bugs.launchpad.net/bugs/1529381
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The intent was to test "proc[i].handler" instead of "proc->handler".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI subtable parsing needs to be extended to allow two or more
handlers to be run in the same ACPI table walk, thus adding
acpi_subtable_proc structure which stores
() ACPI table id
() handler that processes table
() counter how many items has been processed
and passing it to acpi_parse_entries_array() and
acpi_table_parse_entries_array().
This is needed to fix CPU enumeration when APIC/X2APIC entries
are interleaved.
Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When MADT is parsed, print GIC information as debug message:
ACPI: GICC (acpi_id[0x0000] address[00000000e112f000] MPIDR[0x0] enabled)
ACPI: GICC (acpi_id[0x0001] address[00000000e112f000] MPIDR[0x1] enabled)
...
ACPI: GICC (acpi_id[0x0201] address[00000000e112f000] MPIDR[0x201] enabled)
This debug information will be very helpful to bring up early systems to
see if acpi_id and MPIDR are matched or not as spec defined.
CC: Rafael J. Wysocki <rjw@rjwysocki.net>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Tested-by: Yijing Wang <wangyijing@huawei.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>
Tested-by: Timur Tabi <timur@codeaurora.org>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
For a normal 8 cpu sockets system, it will up to 240 cpu threads (Xeon E7
v2 family for now), and we need 240 entries for local apic or local x2apic
in MADT table, so it will be much verbose information printed with a slow
uart console when system booted, this will be even worse with large system
with 16/32 cpu sockets.
This patch just use pr_debug() instead of pr_info() for ioapic/iosapic,
local apic/x2apic/sapic structures when scanning the MADT table to remove
those verbose information, but leave other structures unchanged.
CC: Rafael J Wysocki <rjw@rjwysocki.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
acpi_parse_entries() allows to traverse all available table entries (aka
subtables) by passing max_entries parameter equal to 0, but since its count
variable is only incremented if max_entries is not 0, the function always
returns 0 for max_entries equal to 0. It would be more useful if it returned
the number of entries matched instead, so make it increment count in that
case too.
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The acpi_table_parse() function has a callback that
passes a pointer to a table_header. Add a new function
which takes this pointer and parses its entries. This
eliminates the need to re-traverse all the tables for
each call. e.g. as in acpi_table_parse_madt() which is
normally called after acpi_table_parse().
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
simple_strto*() are obsolete; use kstrto*() instead. Add proper error
checking.
Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The following warning message is triggered:
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:136 __early_ioremap+0x11f/0x1f2()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-rc1-00017-g86dfc6f3-dirty #298
Hardware name: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x036.091920111209 09/19/2011
0000000000000009 ffffffff81b75c40 ffffffff817c627b 0000000000000000
ffffffff81b75c78 ffffffff81067b5d 000000000000007b 8000000000000563
00000000b96b20dc 0000000000000001 ffffffffff300e0c ffffffff81b75c88
Call Trace:
[<ffffffff817c627b>] dump_stack+0x45/0x56
[<ffffffff81067b5d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff81067c3a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81d4b9d5>] __early_ioremap+0x11f/0x1f2
[<ffffffff81d4bc5b>] early_ioremap+0x13/0x15
[<ffffffff81d2b8f3>] __acpi_map_table+0x13/0x18
[<ffffffff817b8d1a>] acpi_os_map_memory+0x26/0x14e
[<ffffffff813ff018>] acpi_tb_acquire_table+0x42/0x70
[<ffffffff813ff086>] acpi_tb_validate_table+0x27/0x37
[<ffffffff813ff0e5>] acpi_tb_verify_table+0x22/0xd8
[<ffffffff813ff6a8>] acpi_tb_install_non_fixed_table+0x60/0x1c9
[<ffffffff81d61024>] acpi_tb_parse_root_table+0x218/0x26a
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d610cd>] acpi_initialize_tables+0x57/0x59
[<ffffffff81d5f25d>] acpi_table_init+0x1b/0x99
[<ffffffff81d2bca0>] acpi_boot_table_init+0x1e/0x85
[<ffffffff81d23043>] setup_arch+0x99d/0xcc6
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d1bbbe>] start_kernel+0x8b/0x415
[<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d1b5ee>] x86_64_start_reservations+0x2a/0x2c
[<ffffffff81d1b72e>] x86_64_start_kernel+0x13e/0x14d
---[ end trace 11ae599a1898f4e7 ]---
when installing the following table during early stage:
ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL S2600CP 00004000 INTL 20100331)
The regression is caused by the size limitation of the x86 early IO mapping.
The root cause is:
1. ACPICA doesn't split IO memory mapping and table mapping;
2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
mechanism during early boot stage, which is more suitable for only IO
mappings.
This patch fixes this issue by utilizing acpi_gbl_verify_table_checksum to
disable the table mapping during early stage and enabling it again for the
late stage. In this way, the normal code path is not affected. Then after
the code related to the root cause is cleaned up, the early checksum
verification can be easily re-enabled.
A new boot parameter - acpi_force_table_verification is introduced for
the platforms that require the checksum verification to stop loading bad
tables.
This fix also covers the checksum verification for the table overrides. Now
large tables can also be overridden using the initrd override mechanism.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
