summaryrefslogtreecommitdiff
path: root/drivers/acpi/sysfs.c
AgeCommit message (Collapse)Author
2021-03-08ACPI: Drop unused ACPI_*_COMPONENT definitions and update documentationRafael J. Wysocki
Drop the definitions of the following symbols: ACPI_SBS_COMPONENT ACPI_FAN_COMPONENT ACPI_CONTAINER_COMPONENT ACPI_MEMORY_DEVICE_COMPONENT that are not used in a meaningful way any more and update the ACPI debug documentation to avoid confusing users by making the impression that the ACPICA debug can be used for anything other than ACPICA itself, which is incorrect. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
2021-03-08ACPI: sysfs: Get rid of ACPICA message printingRafael J. Wysocki
Replace the only ACPI_EXCEPTION() instance in sysfs.c with a pr_warn() call, drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not used any more and drop the ACPI_SYSTEM_COMPONENT definition that would not be used any more in a meaningful way after the above changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
2021-03-08Merge branch 'acpi-pci'Rafael J. Wysocki
Merge the ACPI PCI topic branch depended on by the following material.
2021-03-08ACPI: processor: Get rid of ACPICA message printingRafael J. Wysocki
The ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() macros are used for message printing in the ACPICA code and they should not be used elsewhere. Special configuration (either kernel command line or sysfs-based) is needed to see the messages printed by them and the format of those messages is also special and convoluted. For this reason, replace all of the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances in the ACPI processor driver with corresponding dev_*(), acpi_handle_*() and pr_*() calls depending on the context in which they appear. Also drop the ACPI_PROCESSOR_COMPONENT definition that is not going to be necessary any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
2021-03-08ACPI: PCI: Drop ACPI_PCI_COMPONENT that is not used any moreRafael J. Wysocki
After dropping all of the code using ACPI_PCI_COMPONENT drop the definition of it too and update the documentation to remove all ACPI_PCI_COMPONENT references from it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
2021-02-04ACPI: thermal: Clean up printing messagesRafael J. Wysocki
Replace the ACPI_DEBUG_PRINT() instances in thermal.c with acpi_handle_debug() calls and modify the ACPI_THERMAL_TRIPS_EXCEPTION() macro in there to use acpi_handle_info() internally, which among other things causes the excessive log level of the messages printed by it to be increased. Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not used any more from thermal.c, drop the no longer needed ACPI_THERMAL_COMPONENT definition from the headers and update the documentation accordingly. While at it, add a pr_fmt() definition to thermal.c, drop the PREFIX definition from there and replace some pr_warn() calls with pr_info() or acpi_handle_info() to reduce the excessive log level and (in the latter case) facilitate easier identification of the message source. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-02-04ACPI: video: Clean up printing messagesRafael J. Wysocki
Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/ ACPI_WARNING() instances in there with acpi_handle_info() calls, which among other things causes the excessive log levels of those messages to be increased. Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not used any more from acpi_video.c, drop the no longer needed ACPI_VIDEO_COMPONENT definition from the headers and update the documentation accordingly. While at it, add a pr_fmt() definition to acpi_video.c, replace the direct printk() invocations in there with acpi_handle_info() or pr_info() (and reduce the excessive log level where applicable) and drop the PREFIX sybmbol definition which is not necessary any more from acpi_video.c. Also make unrelated janitorial changes to fix up white space and use ACPI_FAILURE() instead of negating ACPI_SUCCESS(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-02-04ACPI: button: Clean up printing messagesRafael J. Wysocki
Replace the ACPI_DEBUG_PRINT() instance in button.c with an acpi_handle_debug() call, drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not used any more, drop the no longer needed ACPI_BUTTON_COMPONENT definition from the headers and update the documentation accordingly. While at it, replace the direct printk() invocations with pr_info() (that changes the excessive log level for some of them too) and drop the unneeded PREFIX sybmbol definition from battery.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-02-04ACPI: battery: Clean up printing messagesRafael J. Wysocki
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances in battery.c with acpi_handle_debug() and acpi_handle_info() calls, respectively, which among other things causes the excessive log level of the messages previously printed via ACPI_EXCEPTION() to be increased. Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not used any more, drop the no longer needed ACPI_BATTERY_COMPONENT definition from the headers and update the documentation accordingly. While at it, update the pr_fmt() definition and drop the unneeded PREFIX sybmbol definition from battery.c. Also adapt the existing pr_info() calls to the new pr_fmt() definition. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-02-04ACPI: AC: Clean up printing messagesRafael J. Wysocki
Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances in ac.c with acpi_handle_debug() and acpi_handle_info() calls, respectively, which among other things causes the excessive log level of the messages previously printed via ACPI_EXCEPTION() to be increased. Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not used any more, drop the no longer needed ACPI_AC_COMPONENT definition from the headers and update the documentation accordingly. While at it, replace the direct printk() invocation with pr_info(), add a pr_fmt() definition to ac.c and drop the unneeded PREFIX symbol definition from there. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-02-04ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any moreRafael J. Wysocki
After dropping all of the code using ACPI_BUS_COMPONENT drop it too and modify the example in the documentation using it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-04ACPI: PM: Clean up printing messagesRafael J. Wysocki
Replace the remaining ACPI_DEBUG_PRINT() instances in device_pm.c with dev_dbg() invocations, drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not used any more, and drop the no longer needed ACPI_POWER_COMPONENT definition from the headers and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-29Merge back sysfs-related ACPI material for v5.9.Rafael J. Wysocki
2020-06-22ACPI: sysfs: add newlines when printing module parametersXiongfeng Wang
Add newlines for several module parameters printed by sysfs. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-22ACPI: sysfs: Fix pm_profile_attr typeNathan Chancellor
When running a kernel with Clang's Control Flow Integrity implemented, there is a violation that happens when accessing /sys/firmware/acpi/pm_profile: $ cat /sys/firmware/acpi/pm_profile 0 $ dmesg ... [ 17.352564] ------------[ cut here ]------------ [ 17.352568] CFI failure (target: acpi_show_profile+0x0/0x8): [ 17.352572] WARNING: CPU: 3 PID: 497 at kernel/cfi.c:29 __cfi_check_fail+0x33/0x40 [ 17.352573] Modules linked in: [ 17.352575] CPU: 3 PID: 497 Comm: cat Tainted: G W 5.7.0-microsoft-standard+ #1 [ 17.352576] RIP: 0010:__cfi_check_fail+0x33/0x40 [ 17.352577] Code: 48 c7 c7 50 b3 85 84 48 c7 c6 50 0a 4e 84 e8 a4 d8 60 00 85 c0 75 02 5b c3 48 c7 c7 dc 5e 49 84 48 89 de 31 c0 e8 7d 06 eb ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 85 f6 74 25 41 b9 ea ff ff [ 17.352577] RSP: 0018:ffffaa6dc3c53d30 EFLAGS: 00010246 [ 17.352578] RAX: 331267e0c06cee00 RBX: ffffffff83d85890 RCX: ffffffff8483a6f8 [ 17.352579] RDX: ffff9cceabbb37c0 RSI: 0000000000000082 RDI: ffffffff84bb9e1c [ 17.352579] RBP: ffffffff845b2bc8 R08: 0000000000000001 R09: ffff9cceabbba200 [ 17.352579] R10: 000000000000019d R11: 0000000000000000 R12: ffff9cc947766f00 [ 17.352580] R13: ffffffff83d6bd50 R14: ffff9ccc6fa80000 R15: ffffffff845bd328 [ 17.352582] FS: 00007fdbc8d13580(0000) GS:ffff9cce91ac0000(0000) knlGS:0000000000000000 [ 17.352582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.352583] CR2: 00007fdbc858e000 CR3: 00000005174d0000 CR4: 0000000000340ea0 [ 17.352584] Call Trace: [ 17.352586] ? rev_id_show+0x8/0x8 [ 17.352587] ? __cfi_check+0x45bac/0x4b640 [ 17.352589] ? kobj_attr_show+0x73/0x80 [ 17.352590] ? sysfs_kf_seq_show+0xc1/0x140 [ 17.352592] ? ext4_seq_options_show.cfi_jt+0x8/0x8 [ 17.352593] ? seq_read+0x180/0x600 [ 17.352595] ? sysfs_create_file_ns.cfi_jt+0x10/0x10 [ 17.352596] ? tlbflush_read_file+0x8/0x8 [ 17.352597] ? __vfs_read+0x6b/0x220 [ 17.352598] ? handle_mm_fault+0xa23/0x11b0 [ 17.352599] ? vfs_read+0xa2/0x130 [ 17.352599] ? ksys_read+0x6a/0xd0 [ 17.352601] ? __do_sys_getpgrp+0x8/0x8 [ 17.352602] ? do_syscall_64+0x72/0x120 [ 17.352603] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 17.352604] ---[ end trace 7b1fa81dc897e419 ]--- When /sys/firmware/acpi/pm_profile is read, sysfs_kf_seq_show is called, which in turn calls kobj_attr_show, which gets the ->show callback member by calling container_of on attr (casting it to struct kobj_attribute) then calls it. There is a CFI violation because pm_profile_attr is of type struct device_attribute but kobj_attr_show calls ->show expecting it to be from struct kobj_attribute. CFI checking ensures that function pointer types match when doing indirect calls. Fix pm_profile_attr to be defined in terms of kobj_attribute so there is no violation or mismatch. Fixes: 362b646062b2 ("ACPI: Export FADT pm_profile integer value to userspace") Link: https://github.com/ClangBuiltLinux/linux/issues/1051 Reported-by: yuu ichii <byahu140@heisei.be> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-28ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()Qiushi Wu
kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject. Fixes: 3f8055c35836 ("ACPI / hotplug: Introduce user space interface for hotplug profiles") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-19ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100Yunfeng Ye
The commit 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs") says: "Use a bitmap of size 0xFF instead of a u64 for the GPE mask so 256 GPEs can be masked" But the masking of GPE 0xFF it not supported and the check condition "gpe > ACPI_MASKABLE_GPE_MAX" is not valid because the type of gpe is u8. So modify the macro ACPI_MASKABLE_GPE_MAX to 0x100, and drop the "gpe > ACPI_MASKABLE_GPE_MAX" check. In addition, update the docs "Format" for acpi_mask_gpe parameter. Fixes: 0f27cff8597d ("ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs") Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> [ rjw: Use u16 as gpe data type in acpi_gpe_apply_masked_gpes() ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09ACPICA: Rename nameseg length macro/define for clarityBob Moore
ACPICA commit 24870bd9e73d71e2a1ff0a1e94519f8f8409e57d ACPI_NAME_SIZE changed to ACPI_NAMESEG_SIZE This clarifies that this is the length of an individual nameseg, not the length of a generic namestring/namepath. Improves understanding of the code. Link: https://github.com/acpica/acpica/commit/24870bd9 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09ACPICA: Rename nameseg compare macro for clarityBob Moore
ACPICA commit 92ec0935f27e217dff0b176fca02c2ec3d782bb5 ACPI_COMPARE_NAME changed to ACPI_COMPARE_NAMESEG This clarifies (1) this is a compare on 4-byte namesegs, not a generic compare. Improves understanding of the code. Link: https://github.com/acpica/acpica/commit/92ec0935 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12ACPI: sysfs: Prevent get_status() from returning acpi_statusRafael J. Wysocki
The return value of get_status() is passed to user space on errors, so it should not return acpi_status values then. Make it return error values that are meaningful for user space instead. This also makes a Clang warning regarding the initialization of a local variable in get_status() go away. Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-12-13ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEsPrarit Bhargava
The acpi_mask_gpe= kernel parameter documentation states that the range of mask is 128 GPEs (0x00 to 0x7F). The acpi_masked_gpes mask is a u64 so only 64 GPEs (0x00 to 0x3F) can really be masked. Use a bitmap of size 0xFF instead of a u64 for the GPE mask so 256 GPEs can be masked. Fixes: 9c4aa1eecb48 (ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding) Signed-off-by: Prarit Bharava <prarit@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-09ACPI / sysfs: Make function param_set_trace_method_name() staticColin Ian King
The function param_set_trace_method_name is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'param_set_trace_method_name' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-09-03Merge branches 'acpi-sysfs', 'acpi-apei' and 'acpi-blacklist'Rafael J. Wysocki
* acpi-sysfs: ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region * acpi-apei: ACPI / APEI: Suppress message if HEST not present ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: APEI: fix the wrong iteration of generic error status block ACPI: APEI: Enable APEI multiple GHES source to share a single external IRQ * acpi-blacklist: intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list()
2017-08-24ACPI / sysfs: Extend ACPI sysfs to provide access to boot error regionTony Luck
The ACPI sysfs interface provides a way to read each ACPI table from userspace via entries in /sys/firmware/acpi/tables/ The BERT table simply provides the size and address of the error record in BIOS reserved memory and users may want access to this record. In an earlier age we might have used /dev/mem to retrieve this error record, but many systems disable /dev/mem for security reasons. Extend this driver to provide read-only access to the data via a file in a new directory /sys/firmware/acpi/tables/data/BERT Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Tony Luck <tony.luck@intel.com> v4: fix typo reported by Punit Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-18ACPI: Add debug statements to acpi_global_event_handler()Rafael J. Wysocki
It sometimes is useful to examine the timing of ACPI events during certain operations only, like during system suspend/resume, so add pr_debug() statements for that to acpi_global_event_handler(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-03Merge branches 'acpi-button', 'acpica' and 'acpi-sysfs'Rafael J. Wysocki
* acpi-button: Revert "ACPI / button: Change default behavior to lid_init_state=open" * acpica: ACPICA: Tables: Fix regression introduced by a too early mechanism enabling * acpi-sysfs: ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service
2017-04-27ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of serviceDan Williams
Reading an ACPI table through the /sys/firmware/acpi/tables interface more than 65,536 times leads to the following log message: ACPI Error: Table ffff88033595eaa8, Validation count is zero after increment (20170119/tbutils-423) ...and the table being unavailable until the next reboot. Add the missing acpi_put_table() so the table ->validation_count is decremented after each read. Reported-by: Anush Seetharaman <anush.seetharaman@intel.com> Fixes: 174cc7187e6f "ACPICA: Tables: Back port acpi_get_table_with_size() ..." Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13ACPI / scan: Drop support for force_removeMichal Hocko
/sys/firmware/acpi/hotplug/force_remove was presumably added to support auto offlining in the past. This is, however, inherently dangerous for some hotplugable resources like memory. The memory offlining fails when the memory is still in use and cannot be dropped or migrated. If we ignore the failure we are basically allowing for subtle memory corruption or a crash. We have actually noticed the later while hitting BUG() during the memory hotremove (remove_memory): ret = walk_memory_range(PFN_DOWN(start), PFN_UP(start + size - 1), NULL, check_memblock_offlined_cb); if (ret) BUG(); it took us quite non-trivial time realize that the customer had force_remove enabled. Even if the BUG was removed here and we could propagate the error up the call chain it wouldn't help at all because then we would hit a crash or a memory corruption later and harder to debug. So force_remove is unfixable for the memory hotremove. We haven't checked other hotplugable resources to be prone to a similar problems. Remove the force_remove functionality because it is not fixable currently. Keep the sysfs file and report an error if somebody tries to enable it. Encourage users to report about the missing functionality and work with them with an alternative solution. Reviewed-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-26ACPI / sysfs: Provide quirk mechanism to prevent GPE floodingLv Zheng
Sometimes, the users may require a quirk to be provided from ACPI subsystem core to prevent a GPE from flooding. Normally, if a GPE cannot be dispatched, ACPICA core automatically prevents the GPE from firing. But there are cases the GPE is dispatched by _Lxx/_Exx provided via AML table, and OSPM is lacking of the knowledge to get _Lxx/_Exx correctly executed to handle the GPE, thus the GPE flooding may still occur. The existing quirk mechanism can be enabled/disabled using the following commands to prevent such kind of GPE flooding during runtime: # echo mask > /sys/firmware/acpi/interrupts/gpe00 # echo unmask > /sys/firmware/acpi/interrupts/gpe00 To avoid GPE flooding during boot, we need a boot stage mechanism. This patch provides such a boot stage quirk mechanism to stop this kind of GPE flooding. This patch doesn't fix any feature gap but since the new feature gaps could be found in the future endlessly, and can disappear if the feature gaps are filled, providing a boot parameter rather than a DMI table should suffice. Link: https://bugzilla.kernel.org/show_bug.cgi?id=53071 Link: https://bugzilla.kernel.org/show_bug.cgi?id=117481 Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/887793 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17ACPI / sysfs: Update sysfs signature handling codeLv Zheng
This patch cleans up sysfs table signature handling code: 1. Convert the signature handling code to use the ACPICA APIs to benefit from the future improvements of the APIs. 2. Add 'filename' attribute in order to handle both BE/LE name tags. 3. Add instance check in order to avoid the possible buffer overflow related to the table file name. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17ACPI / sysfs: Fix an issue for LoadTable opcodeLv Zheng
OEM tables can be installed via RSDT/XSDT, in this case, they have already been created under /sys/firmware/acpi/tables. For this kind of tables, normally LoadTable opcode will be executed to load them. If LoadTable opcode is executed after acpi_sysfs_init(), acpi_sysfs_table_handler() will be invoked, thus a redundant table file will be created under /sys/firmware/acpi/tables/dynamic. Then running "acpidump" on such platform results in an error, complaining blank empty table (see Link 1 below). The bug can be reproduced by customizing an OEM1 table, allowing it to be overridden via 'table_sigs' (drivers/acpi/tables.c), adding the following code to the customized DSDT to load it: Name (OEMH, Zero) Name (OEMF, One) If (LEqual (OEMF, One)) { Store (LoadTable ("OEM1", "Intel", "Test"), OEMH) Store (Zero, OEMF) } In order to make sure that the OEM1 table is installed after acpi_sysfs_init(), acpi_sysfs_init() can be moved before invoking acpi_load_tables(). Then the following command execution result can be seen: # acpidump > acpidump.txt Could not read table header: /sysfs/firmware/acpi/tables/dynamic/OEM12 Could not get ACPI table at index 17, AE_BAD_HEADER Link: https://bugzilla.kernel.org/show_bug.cgi?id=150841 # [1] Link: https://github.com/acpica/acpica/commit/ed6a5fbc Reported-by: Jason Voelz <jason.voelz@intel.com> Reported-by: Francisco Leoner <francisco.j.lenoer.soto@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-17ACPI / sysfs: Use new GPE masking mechanism in GPE interfaceLv Zheng
Now GPE can be masked via the new acpi_mask_gpe() API and this patch modifies /sys/firmware/acpi/interrupts/gpexx to use this new facility. Writes "mask/unmask" to this file now invokes acpi_mask_gpe(). Reads from this file now returns new "EN/STS" when the corresponding GPE hardware register's EN/STS bits are flagged, and new "masked/unmasked" attribute to indicate the status of the masking mechanism. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08ACPI: add support for ACPI reconfiguration notifiersOctavian Purdila
Add support for ACPI reconfiguration notifiers to allow subsystems to react to changes in the ACPI tables that happen after the initial enumeration. This is similar with the way dynamic device tree notifications work. The reconfigure notifications supported for now are device add and device remove. Since ACPICA allows only one table notification handler, this patch makes the table notifier function generic and moves it out of the sysfs specific code. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-05ACPI / sysfs: fix error code in get_status()Dan Carpenter
The problem with ornamental, do-nothing gotos is that they lead to "forgot to set the error code" bugs. We should be returning -EINVAL here but we don't. It leads to an uninitalized variable in counter_show(): drivers/acpi/sysfs.c:603 counter_show() error: uninitialized symbol 'status'. Fixes: 1c8fce27e275 (ACPI: introduce drivers/acpi/sysfs.c) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-26ACPI / sysfs: correctly check failing memory allocationInsu Yun
Since kobject_create_and_add() can fail under memory pressure, its return value needs to be checked against NULL before passing it to sysfs_create_file(). Signed-off-by: Insu Yun <wuninsu@gmail.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-07ACPI / sysfs: Add support to allow leading "\" missing in trace_method_name.Lv Zheng
Since _SB.PCI0 can be used as relative path from root and can be easily converted into internal trace_method_name format, we allow users to specify trace_method_name using relative paths from root. Note this is useful for grub2 for which users failed to pass "\" from the grub configuration file. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-07ACPI / sysfs: Update method tracing facility.Lv Zheng
This patch updates the method tracing facility as the acpi_debug_trace() API has been updated to allow it to trace AML interpreter execution, the meanings and the usages of the API parameters are changed due to the updates. The new API: 1. Uses ACPI_TRACE_ENABLED flag to indicate the enabling of the tracer; 2. Allows tracer still can be enabled when method name is not specified so that the AML interpreter execution can be traced without knowing the method name, which is useful for kernel boot tracing; 3. Supports arbitrary full path name, it doesn't need to be a name related to an entrance of acpi_evaluate_object(). Note that the sysfs parameters are also updated so that when reading the attribute files, ACPICA internal settings are returned. In order to make the sysfs parameters (acpi.trace_state) available during boot, this patch adds code to bypass ACPICA semaphore/mutex invocations when acpi mutex utilities haven't been initialized. This patch doesn't update documentation of method tracing facility, it will be updated by further patches. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-07ACPI / sysfs: Add ACPI_LV_REPAIR debug level.Lv Zheng
This patch updates debug_level file, adding ACPI_LV_REPAIR. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-10ACPI / sysfs: Treat the count field of counter_show() as unsignedNan Li
The count field is an unsigned 32bit value, and the counter_show() function should also treat it as a unsigned value. Otherwise the counter may show negative number as we found on a machine: ... gpe23: 0 invalid gpe24: -2071733 enabled gpe25: 0 invalid ... gpe_all: -2070980 sci: -2070949 Signed-off-by: Nan Li <nli@suse.com> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21ACPICA: Events: Reduce source code difference for the ACPI_EVENT_FLAG_HANDLE ↵Lv Zheng
renaming. This patch is partial linuxized result of the following ACPICA commit: ACPICA commit: a73b66c6aa1846d055bb6390d9c9b9902f7d804d Subject: Add "has handler" flag to event/gpe status interfaces. This change adds a new flag, ACPI_EVENT_FLAGS_HAS_HANDLER to the acpi_get_event_status and acpi_get_gpe_status external interfaces. It is set if the event/gpe currently has a handler associated with it. This patch contains the code to rename ACPI_EVENT_FLAG_HANDLE to ACPI_EVENT_FLAG_HAS_HANDLER, and the corresponding updates of its usages. Link: https://github.com/acpica/acpica/commit/a73b66c6 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-19ACPI: Remove duplicate definitions of PREFIXHanjun Guo
We already have a macro for PREFIX of "ACPI: " in drivers/acpi/internal.h, so remove the duplicate ones in ACPI drivers when internal.h is included. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-29Merge branches 'acpi-processor', 'acpi-hotplug', 'acpi-init', 'acpi-pm' and ↵Rafael J. Wysocki
'acpica' * acpi-processor: ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID" ACPI / processor: Return specific error value when mapping lapic id * acpi-hotplug: ACPI / scan: Clear match_driver flag in acpi_bus_trim() * acpi-init: ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API * acpi-pm: ACPI / PM: Use ACPI_COMPANION() to get ACPI companions of devices * acpica: ACPICA: Remove bool usage from ACPICA.
2014-01-27ACPICA: Remove bool usage from ACPICA.Lv Zheng
The use of "bool" is not safe for ACPICA code where it is originally using a "BOOLEAN" defined as "unsigned char". This patch removes the only "bool" usage from kernel source tree to reduce the source code differences between Linux and ACPICA upstream. This patch is required by future acpidump release automation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-12Merge branch 'acpi-cleanup'Rafael J. Wysocki
* acpi-cleanup: (22 commits) ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment. ACPI / tables: Check if id is NULL in acpi_table_parse() ACPI / proc: Include appropriate header file in proc.c ACPI / EC: Remove unused functions and add prototype declaration in internal.h ACPI / dock: Include appropriate header file in dock.c ACPI / PCI: Include appropriate header file in pci_link.c ACPI / PCI: Include appropriate header file in pci_slot.c ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c ACPI / NVS: Include appropriate header file in nvs.c ACPI / OSL: Mark the function acpi_table_checksum() as static ACPI / processor: initialize a variable to silence compiler warning ACPI / processor: use ACPI_COMPANION() to get ACPI device ACPI: correct minor typos ACPI / sleep: Drop redundant acpi_disabled check ACPI / dock: Drop redundant acpi_disabled check ACPI / table: Replace '1' with specific error return values ACPI: remove trailing whitespace ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h> SFI / ACPI: Fix warnings reported during builds with W=1 ... Conflicts: drivers/acpi/nvs.c drivers/hwmon/asus_atk0110.c
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-21ACPI / sysfs: Fix incorrect ACPI tables walk in acpi_tables_sysfs_init()Jeremy Compostella
When executing on an ACPI Hardware Reduced hardware, all the ACPI tables are not exposed in sysfs due to the fact that FACS is silently ignored by the kernel in the ACPI hardware reduced mode and, moreover, the acpi_tables_sysfs_init() ACPI table walk is buggy and stops too soon. The acpi_tables_sysfs_init() function should rely on the acpi_status return value from acpi_get_table_by_index() to decide whether or not to stop the iteration (the walk should only be terminated when that value is AE_BAD_PARAMETER). This way, when running in an ACPI Harware Reduced environment (where the FACS table is silently ignored by the kernel) or if some ACPI tables are not correctly memory mapped or have bad checksums, it will still walk through the remaining tables that may be correct. [rjw: Changelog] Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>