summaryrefslogtreecommitdiff
path: root/drivers/acpi/sleep.c
AgeCommit message (Collapse)Author
2012-11-15ACPI / PM: Fix device PM kernedoc comments and #ifdefsRafael J. Wysocki
The kerneldoc comments for acpi_pm_device_sleep_state(), acpi_pm_device_run_wake(), and acpi_pm_device_sleep_wake() are outdated or otherwise inaccurate and/or don't follow the common kerneldoc patterns, so fix them. Additionally, notice that acpi_pm_device_run_wake() should be under CONFIG_PM_RUNTIME rather than under CONFIG_PM_SLEEP, so fix that too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-24PM / ACPI: Take device PM QoS flags into accountRafael J. Wysocki
Make ACPI power management routines and PCI power management routines depending on ACPI take device PM QoS flags into account when deciding what power state to put the device into. In particular, after this change acpi_pm_device_sleep_state() will not return ACPI_STATE_D3_COLD as the deepest available low-power state if PM_QOS_FLAG_NO_POWER_OFF is requested for the device and it will not require remote wakeup to work for the device in the returned low-power state if there is at least one PM QoS flags request for the device, but PM_QOS_FLAG_REMOTE_WAKEUP is not requested for it. Accordingly, acpi_pci_set_power_state() will refuse to put the device into D3cold if PM_QOS_FLAG_NO_POWER_OFF is requested for it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Huang Ying <ying.huang@intel.com>
2012-08-03Merge branches 'delete-gts-bfs', 'misc', 'novell-bugzilla-757888-numa' and ↵Len Brown
'osc-pcie' into base
2012-07-30ACPI: delete _GTS/_BFS supportLen Brown
_GTS and _BFS were added to the suspend/resume flow in the ACPI 2.0 specification. Linux dutifully implemented _GTS and _BFS. We discovered that it was rarely seen in systems in the field. Further, some of those systems had AML so bogus that it could never work -- proof that no other operating system supports _GTS and _BFS. So we made _GTS and _BFS optional via modparam, and disabled them by default. But we've had to complicate some code to keep this support in the kernel, as these methods are defined to be evaluated very close to sleep entry and exit. Indeed, no other AML is ever evaluated with interrupts off. We have submitted a proposal for _GTS and _BFS to be officially removed from the ACPI specification on the next revision. Here we remove it from Linux. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-26ACPI / PM: Fix build warning in sleep.c for CONFIG_ACPI_SLEEP unsetRafael J. Wysocki
If CONFIG_ACPI_SLEEP is unset, the compiler complains that pwr_btn_event_pending is defined but not used. To silence the warning, move the definition of pwr_btn_event_pending under an appropriate #ifdef. Reported-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Len Brown <len.brown@intel.com>
2012-07-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & power management update from Len Brown: "Re-write of the turbostat tool. lower overhead was necessary for measuring very large system when they are very idle. IVB support in intel_idle It's what I run on my IVB, others should be able to also:-) ACPICA core update We have found some bugs due to divergence between Linux and the upstream ACPICA base. Most of these patches are to reduce that divergence to reduce the risk of future bugs. Some cpuidle updates, mostly for non-Intel More will be coming, as they depend on this part. Some thermal management changes needed by non-ACPI systems. Some _OST (OS Status Indication) updates for hot ACPI hot-plug." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits) Thermal: Documentation update Thermal: Add Hysteresis attributes Thermal: Make Thermal trip points writeable ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check tools/power: turbostat: fix large c1% issue tools/power: turbostat v2 - re-write for efficiency ACPICA: Update to version 20120711 ACPICA: AcpiSrc: Fix some translation issues for Linux conversion ACPICA: Update header files copyrights to 2012 ACPICA: Add new ACPI table load/unload external interfaces ACPICA: Split file: tbxface.c -> tbxfload.c ACPICA: Add PCC address space to space ID decode function ACPICA: Fix some comment fields ACPICA: Table manager: deploy new firmware error/warning interfaces ACPICA: Add new interfaces for BIOS(firmware) errors and warnings ACPICA: Split exception code utilities to a new file, utexcep.c ACPI: acpi_pad: tune round_robin_time ACPICA: Update to version 20120620 ACPICA: Add support for implicit notify on multiple devices ACPICA: Update comments; no functional change ...
2012-07-26Merge branches 'acpi_pad', 'acpica', 'apei-bugzilla-43282', 'battery', ↵Len Brown
'cpuidle-coupled', 'cpuidle-tweaks', 'intel_idle-ivb', 'ost', 'red-hat-bz-772730', 'thermal', 'thermal-spear' and 'turbostat-v2' into release
2012-07-25Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstreamJeff Garzik
Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
2012-06-29libata-acpi: add ata port runtime D3Cold supportLin Ming
ATA port may support runtime D3Cold state, for example, Zero-power ODD case. This patch adds wakeup notifier and enable/disable run_wake during supend/resume. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-23ACPI/PM: specify lowest allowed state for device sleep stateHuang Ying
Lower device sleep state can save more power, but has more exit latency too. Sometimes, to satisfy some power QoS and other requirement, we need to constrain the lowest device sleep state. In this patch, a parameter to specify lowest allowed state for acpi_pm_device_sleep_state is added. So that the caller can enforce the constraint via the parameter. This is needed by PCIe D3cold support, where the lowest power state allowed may be D3_HOT instead of default D3_COLD. CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-04Merge branches 'bugfix-battery', 'bugfix-misc', 'bugfix-rafael', ↵Len Brown
'bugfix-turbostat', 'bugfix-video' and 'workaround-pss' into release bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-03Merge branch 'pm-acpi' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull some left-over PM patches from Rafael J. Wysocki. * 'pm-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Make acpi_pm_device_sleep_state() follow the specification ACPI / PM: Make __acpi_bus_get_power() cover D3cold correctly ACPI / PM: Fix error messages in drivers/acpi/bus.c rtc-cmos / PM: report wakeup event on ACPI RTC alarm ACPI / PM: Generate wakeup events on fixed power button
2012-06-01ACPICA: Remove argument of acpi_os_wait_events_completeLin Ming
Remove the unused argument of acpi_os_wait_events_complete. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-30x86, realmode: Unbreak the ia64 build of drivers/acpi/sleep.cH. Peter Anvin
Revert usage of acpi_wakeup_address and move definition to x86 architecture code in order to make compilation work in ia64. [jsakkine: tested compilation in ia64/x86-64 and added proper commit message] Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Originally-by: H. Peter Anvin <hpa@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Link: http://lkml.kernel.org/r/1338370421-27735-1-git-send-email-jarkko.sakkinen@intel.com Cc: Tony Luck <tony.luck@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-29Merge branch 'x86-trampoline-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 trampoline rework from H. Peter Anvin: "This code reworks all the "trampoline"/"realmode" code (various bits that need to live in the first megabyte of memory, most but not all of which runs in real mode at some point) in the kernel into a single object. The main reason for doing this is that it eliminates the last place in the kernel where we needed pages to be mapped RWX. This code separates all that code into proper R/RW/RX pages." Fix up conflicts in arch/x86/kernel/Makefile (mca removed next to reboot code), and arch/x86/kernel/reboot.c (reboot code moved around in one branch, modified in this one), and arch/x86/tools/relocs.c (mostly same code came in earlier due to working around the ld bugs just before the 3.4 release). Also remove stale x86-relocs entry from scripts/.gitignore as per Peter Anvin. * commit '61f5446169046c217a5479517edac3a890c3bee7': (36 commits) x86, realmode: Move end signature into header.S x86, relocs: When printing an error, say relative or absolute x86, relocs: More relocations which may end up as absolute x86, relocs: Workaround for binutils 2.22.52.0.1 section bug xen-acpi-processor: Add missing #include <xen/xen.h> acpi, bgrd: Add missing <linux/io.h> to drivers/acpi/bgrt.c x86, realmode: Change EFER to a single u64 field x86, realmode: Move kernel/realmode.c to realmode/init.c x86, realmode: Move not-common bits out of trampoline_common.S x86, realmode: Mask out EFER.LMA when saving trampoline EFER x86, realmode: Fix no cache bits test in reboot_32.S x86, realmode: Make sure all generated files are listed in targets x86, realmode: build fix: remove duplicate build x86, realmode: read cr4 and EFER from kernel for 64-bit trampoline x86, realmode: fixes compilation issue in tboot.c x86, realmode: move relocs from scripts/ to arch/x86/tools x86, realmode: header for trampoline code x86, realmode: flattened rm hierachy x86, realmode: don't copy real_mode_header x86, realmode: fix 64-bit wakeup sequence ...
2012-05-29ACPI / PM: Make acpi_pm_device_sleep_state() follow the specificationRafael J. Wysocki
The comparison between the system sleep state being entered and the lowest system sleep state the given device may wake up from in acpi_pm_device_sleep_state() is reversed, because the specification (ACPI 5.0) says that for wakeup to work: "The sleeping state being entered must be less than or equal to the power state declared in element 1 of the _PRW object." In other words, the state returned by _PRW is the deepest (lowest-power) system sleep state the device is capable of waking up the system from. Moreover, acpi_pm_device_sleep_state() also should check if the wakeup capability is supported through ACPI, because in principle it may be done via native PCIe PME, for example, in which case _SxW should not be evaluated. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-29ACPI / PM: Generate wakeup events on fixed power buttonDaniel Drake
When the system is woken up by the ACPI fixed power button, currently there is no way of userspace becoming aware that the power button was pressed. OLPC would like to know this, so that we can respond appropriately. For example, if the system was woken up by a network packet, we know we can go back to sleep very quickly. But if the user explicitly woke the system with the power button, we're going to want to stay awake for a while. The wakeup count mechanism seems like a good fit for communicating this. Mark the fixed power button as wakeup-enabled, and increment its wakeup counter when the system is woken with the power button. (The wakeup counter is also incremented when the power button is pressed during system operation; this is already handled by an existing acpi-button codepath). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-08x86, realmode: don't copy real_mode_headerJarkko Sakkinen
Replaced copying of real_mode_header with a pointer to beginning of RM memory. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-19-git-send-email-jarkko.sakkinen@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-05-08x86, realmode: Move ACPI wakeup to unified realmode codeJarkko Sakkinen
Migrated ACPI wakeup code to the real-mode blob. Code existing in .x86_trampoline can be completely removed. Static descriptor table in wakeup_asm.S is courtesy of H. Peter Anvin. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-7-git-send-email-jarkko.sakkinen@intel.com Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-05-08acpi: use KERN_CONT in printk() continuation linesKay Sievers
Cc: Len Brown <lenb@kernel.org> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23ACPI: Convert wake_sleep_flags to a value instead of functionKonrad Rzeszutek Wilk
With commit a2ef5c4fd44ce3922435139393b89f2cce47f576 "ACPI: Move module parameter gts and bfs to sleep.c" the wake_sleep_flags is required when calling acpi_enter_sleep_state, which means that if there are functions outside the sleep.c code they can't get the wake_sleep_flags values. This converts the function in to a exported value and converts the module config operands to a function. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Lin Ming <ming.m.lin@intel.com> [v2: Parameters can be turned on/off dynamically] [v3: unsigned char -> u8] [v4: val -> kp->arg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Link: http://lkml.kernel.org/r/1335150198-21899-2-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-03-30Merge branch 'd3' into releaseLen Brown
Conflicts: drivers/acpi/sleep.c This was a text conflict between a2ef5c4fd44ce3922435139393b89f2cce47f576 (ACPI: Move module parameter gts and bfs to sleep.c) which added #include <linux/module.h> and b24e5098853653554baf6ec975b9e855f3d6e5c0 (ACPI, PCI: Move acpi_dev_run_wake() to ACPI core) which added #include <linux/pm_runtime.h> The resolution was to take them both. Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI, PCI: Move acpi_dev_run_wake() to ACPI coreLin Ming
acpi_dev_run_wake() is a generic function which can be used by other subsystem too. Rename it to acpi_pm_device_run_wake, to be consistent with acpi_pm_device_sleep_wake. Then move it to ACPI core. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-26ACPI: Move module parameter gts and bfs to sleep.cLin Ming
Move linux specific module parameter gts and bfs out of ACPICA core code to sleep.c. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-26ACPICA: Sleep/Wake interfaces: optionally execute _GTS and _BFSLin Ming
Enhanced the sleep/wake interfaces to optionally execute the _GTS method (Going To Sleep), and the _BFS method (Back From Sleep). Windows apparently does not execute these methods, and therefore these methods are often untested. It has been seen on some systems where the execution of these methods causes errors and also prevents the machine from entering S5. It is therefore suggested that host operating systems do not execute these methods by default. In the future, perhaps these methods can be optionally executed based on the age of the system and/or what is the newest version of Windows that the BIOS asks for via _OSI. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22ACPICA: Clarify METHOD_NAME* defines for full-pathname casesBob Moore
Changed the METHOD_NAME* defines that define a full pathname to the method to METHOD_PATHNAME* in order to make it clear that it is not a simple 4-character ACPI name. Used for the various sleep/wake methods. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-21ACPI / PM: Add Sony Vaio VPCCW29FX to nonvs blacklist.Lan Tianyu
Sony Vaio VPCCW29FX does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. https://bugzilla.kernel.org/show_bug.cgi?id=34722 Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-12-06ACPI / PM: Do not save/restore NVS on Asus K54C/K54HRKeng-Yu Lin
The models do not resume correctly without acpi_sleep=nonvs. Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-04ACPI / PM: Add Sony VPCEB17FX to nonvs blacklistDave Jones
Another entry for the nonvs blacklist, as noted by a user in https://bugzilla.redhat.com/show_bug.cgi?id=641789#c12 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-22ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist.Dave Jones
As noted by a user in https://bugzilla.redhat.com/show_bug.cgi?id=641789 The Sony VGN-FW21E also needs the nonvs by default workaround added. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvsBogdan Radulescu
Sony Vaio VGN-FW520F does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=16396#c86 Signed-off-by: Bogdan Radulescu <bogdan@nimblex.net> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvsRafael J. Wysocki
Apparently, Sony Vaio VGN-SR26GN_P does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=16396#c91 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-30ACPI: DMI workaround for Asus A8N-SLI Premium and Asus A8N-SLI DELUXZhang Rui
DMI workaround for A8N-SLI Premium and A8N-SLI DELUXE to enable the s3 suspend old ordering. http://bugzilla.kernel.org/show_bug.cgi?id=9528 Tested-by: Heiko Ettelbrück <hbruckynews@gmx.de> Tested-by: Brian Beardall <brian@rapsure.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-23Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/acpi/sleep.c Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-16Merge branch 'x86-trampoline-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix binutils-2.21 symbol related build failures x86-64, trampoline: Remove unused variable x86, reboot: Fix the use of passed arguments in 32-bit BIOS reboot x86, reboot: Move the real-mode reboot code to an assembly file x86: Make the GDT_ENTRY() macro in <asm/segment.h> safe for assembly x86, trampoline: Use the unified trampoline setup for ACPI wakeup x86, trampoline: Common infrastructure for low memory trampolines Fix up trivial conflicts in arch/x86/kernel/Makefile
2011-03-15PM: Remove CONFIG_PM_OPSRafael J. Wysocki
After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be replaced with CONFIG_PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24ACPI / PM: acpi_hibernation_enter() need not switch interrupts offRafael J. Wysocki
The function acpi_hibernation_enter() is always called with interrupts off, so it doesn't need to switch them off and on. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24ACPI / PM: Merge do_suspend_lowlevel() into acpi_save_state_mem()Rafael J. Wysocki
The function do_suspend_lowlevel() is specific to x86 and defined in assembly code, so it should be called from the x86 low-level suspend code rather than from acpi_suspend_enter(). Merge do_suspend_lowlevel() into the x86's acpi_save_state_mem() and change the name of the latter to acpi_suspend_lowlevel(), so that the function's purpose is better reflected by its name. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24ACPI / PM: Call acpi_save_state_mem() right before low-level suspendRafael J. Wysocki
Since acpi_save_state_mem() is only called by acpi_suspend_enter() if the target sleep state is S3, it's better to call it under the switch (acpi_state), right before do_suspend_lowlevel(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24ACPI / PM: Modify the "low-level resume finished" messageRafael J. Wysocki
Move the low-level resume completion message to the point where control goes back to acpi_suspend_enter() during resume and change it so that it's more informative. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24ACPI / PM: acpi_suspend_enter() need not switch interrupts offRafael J. Wysocki
The function acpi_suspend_enter() is always called with interrupts off, so it doesn't need to switch them off and on. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24ACPI / PM: Drop acpi_restore_state_mem()Rafael J. Wysocki
The function acpi_restore_state_mem() has never been and most likely never will be used, so remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-17x86, trampoline: Use the unified trampoline setup for ACPI wakeupH. Peter Anvin
Use the unified trampoline allocation setup to allocate and install the ACPI wakeup code in low memory. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <4D5DFBE4.7090104@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2011-01-20ACPI / PM: Call suspend_nvs_free() earlier during resumeRafael J. Wysocki
It turns out that some device drivers map pages from the ACPI NVS region during resume using ioremap(), which conflicts with ioremap_cache() used for mapping those pages by the NVS save/restore code in nvs.c. Make the NVS pages mapped by the code in nvs.c be unmapped before device drivers' resume routines run. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits) ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework ACPI: fix resource check message ACPI / Battery: Update information on info notification and resume ACPI: Drop device flag wake_capable ACPI: Always check if _PRW is present before trying to evaluate it ACPI / PM: Check status of power resources under mutexes ACPI / PM: Rename acpi_power_off_device() ACPI / PM: Drop acpi_power_nocheck ACPI / PM: Drop acpi_bus_get_power() Platform / x86: Make fujitsu_laptop use acpi_bus_update_power() ACPI / Fan: Rework the handling of power resources ACPI / PM: Register power resource devices as soon as they are needed ACPI / PM: Register acpi_power_driver early ACPI / PM: Add function for updating device power state consistently ACPI / PM: Add function for device power state initialization ACPI / PM: Introduce __acpi_bus_get_power() ACPI / PM: Introduce function for refcounting device power resources ACPI / PM: Add functions for manipulating lists of power resources ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes ACPICA: Update version to 20101209 ...
2011-01-12Merge branch 'suspend-ioremap-cache' into releaseLen Brown
2011-01-07ACPI / PM: Blacklist Averatec machine known to require acpi_sleep=nonvsRafael J. Wysocki
Apparently, Averatec AV1020-ED2 does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=16396#c86 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07PM: Fix oops in suspend/hibernate code related to failing ioremap()Jiri Slaby
When ioremap() fails (which might happen for some reason), we nicely oops in suspend_nvs_save() due to NULL dereference by memcpy() in there. Fail gracefully instead. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-13Merge branch 'bugzilla-23002' into releaseLen Brown