summaryrefslogtreecommitdiff
path: root/drivers/acpi/internal.h
AgeCommit message (Collapse)Author
2012-11-29Merge branch 'acpi-general'Rafael J. Wysocki
* acpi-general: (38 commits) ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device() ACPI: Fix logging when no pci_irq is allocated ACPI: Update Dock hotplug error messages ACPI: Update Container hotplug error messages ACPI: Update Memory hotplug error messages ACPI: Update CPU hotplug error messages ACPI: Add acpi_handle_<level>() interfaces ACPI: remove use of __devexit ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist. ACPI / battery: Correct battery capacity values on Thinkpads Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info" ACPI: create _SUN sysfs file ACPI / memhotplug: bind the memory device when the driver is being loaded ACPI / memhotplug: don't allow to eject the memory device if it is being used ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug ACPI / memhotplug: deal with eject request in hotplug queue ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove() ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device ... Conflicts: include/linux/acpi.h (two additions at the end of the same file)
2012-11-15ACPI: Add support for platform bus typeMika Westerberg
With ACPI 5 it is now possible to enumerate traditional SoC peripherals, like serial bus controllers and slave devices behind them. These devices are typically based on IP-blocks used in many existing SoC platforms and platform drivers for them may already be present in the kernel tree. To make driver "porting" more straightforward, add ACPI support to the platform bus type. Instead of writing ACPI "glue" drivers for the existing platform drivers, register the platform bus type with ACPI to create platform device objects for the drivers and bind the corresponding ACPI handles to those platform devices. This should allow us to reuse the existing platform drivers for the devices in question with the minimum amount of modifications. This changeset is based on Mika Westerberg's and Mathias Nyman's work. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / EC: Cleanup the member name for spinlock/mutex in structFeng Tang
Current member names for mutex/spinlock are a little confusing. Change the { struct mutex lock; spinlock_t curr_lock; } to { struct mutex mutex; spinlock_t lock; } So that the code is cleaner and easier to read. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2011-05-29ACPI: Cleanup custom_method debug stuffThomas Renninger
- Move param aml_debug_output to other params into sysfs.c - Split acpi_debugfs_init to prepare custom_method to be an own .config option and driver. Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: rui.zhang@intel.com Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-18ACPI: Remove the unused EC sysdev classRafael J. Wysocki
The ACPI EC driver defines a sysdev class, but it doesn't use it, so it can be removed. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12Merge branch 'suspend-ioremap-cache' into releaseLen Brown
2011-01-12ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS reworkRafael J. Wysocki
The recent rework of the NVS saving/restoring code introduced two build issues for !CONFIG_ACPI, a warning in drivers/acpi/internal.h and an error in arch/x86/kernel/e820.c. Fix them by providing suitable static inline definitions of the relevant functions. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12Merge branch 'suspend-ioremap-cache' into releaseLen Brown
2011-01-12ACPI / PM: Drop acpi_power_nocheckRafael J. Wysocki
Since acpi_bus_set_power() should not use __acpi_bus_get_power() to update the device's device->power.state field before changing its power state (this may cause device->power.state to be inconsistent with the device power resources' reference counters), remove this call from it. In consequence, the acpi_power_nocheck variable is not necessary any more, so it can be dropped along with the DMI table used for setting that variable for HP Pavilion 05. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI / PM: Add function for device power state initializationRafael J. Wysocki
Add function acpi_bus_init_power() for getting the initial power state of an ACPI device and reference counting its power resources as appropriate. Make acpi_bus_get_power_flags() use the new function instead of acpi_bus_get_power() that updates device->power.state without reference counting the device's power resources. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI / PM: Introduce function for refcounting device power resourcesRafael J. Wysocki
Introduce function acpi_power_on_resources() that reference counts and possibly turns on ACPI power resources for a given device and a given power state of it. This function will be used for reference counting device power resources during initialization. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI / PM: Prevent acpi_power_get_inferred_state() from making changesRafael J. Wysocki
acpi_power_get_inferred_state() should not update device->power.state behind the back of its caller, so make it return the state via a pointer instead. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07PM / ACPI: Move NVS saving and restoring code to drivers/acpiRafael J. Wysocki
The saving of the ACPI NVS area during hibernation and suspend and restoring it during the subsequent resume is entirely specific to ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS configuration option which is redundant. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15Merge branch 'linus' into releaseLen Brown
Conflicts: drivers/acpi/debug.c Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI: remove deprecated ACPI procfs I/FZhang Rui
Rmove deprecated ACPI procfs I/F, including /proc/acpi/debug_layer /proc/acpi/debug_level /proc/acpi/info /proc/acpi/dsdt /proc/acpi/fadt /proc/acpi/sleep because the sysfs I/F is already available and has been working well for years. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI: introduce drivers/acpi/sysfs.cZhang Rui
Introduce drivers/acpi/sysfs.c. code for ACPI sysfs I/F, including #ifdef ACPI_DEBUG /sys/module/acpi/parameters/debug_layer /sys/module/acpi/parameters/debug_level /sys/module/acpi/parameters/trace_method_name /sys/module/acpi/parameters/trace_debug_layer /sys/module/acpi/parameters/trace_debug_level /sys/module/acpi/parameters/trace_state #endif /sys/module/acpi/parameters/acpica_version /sys/firmware/acpi/tables/ /sys/firmware/acpi/interrupts/ is moved to this file. No function change in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14ACPI: introduce drivers/acpi/debugfs.cZhang Rui
Introduce drivers/acpi/debugfs.c. Code for ACPI debugfs I/F, i.e. /sys/kernel/debug/acpi/custom_method, is moved to this file. And make ACPI debugfs always built in, even if CONFIG_ACPI_DEBUG is cleared. BTW:this adds about 400bytes code to ACPI, when CONFIG_ACPI_DEBUG is cleared. [uaccess.h build fix from Andrew Morton <akpm@linux-foundation.org>] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03ACPI: Provide /sys/kernel/debug/ec/...Thomas Renninger
This patch provides the same information through debugfs, which previously was provided through /proc/acpi/embedded_controller/*/info This is the gpe the EC is connected to and whether the global lock gets used. The io ports used are added to /proc/ioports in another patch. Beside the fact that /proc/acpi is deprecated for quite some time, this info is not needed for applications and thus can be moved to debugfs instead of a public interface like /sys. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Alexey Starikovskiy <astarikovskiy@suse.de> CC: Len Brown <lenb@kernel.org> CC: linux-kernel@vger.kernel.org CC: linux-acpi@vger.kernel.org CC: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: platform-driver-x86@vger.kernel.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-05-28ACPI / EC / PM: Fix names of functions that block/unblock EC transactionsRafael J. Wysocki
The names of the functions used for blocking/unblocking EC transactions during suspend/hibernation suggest that the transactions are suspended and resumed by them, while in fact they are disabled and enabled. Rename the functions (and the flag used by them) to better reflect what they really do. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28ACPI / EC / PM: Fix race between EC transactions and system suspendRafael J. Wysocki
There still is a race that may result in suspending the system in the middle of an EC transaction in progress, which leads to problems (like the kernel thinking that the ACPI global lock is held during resume while in fact it's not). To remove the race condition, modify the ACPI platform suspend and hibernate callbacks so that EC transactions are blocked right after executing the _PTS global control method and are allowed to happen again right after the low-level wakeup. Introduce acpi_pm_freeze() that will disable GPEs, wait until the event queues are empty and block EC transactions. Use it wherever GPEs are disabled in preparation for switching local interrupts off. Introduce acpi_pm_thaw() that will allow EC transactions to happen again and enable runtime GPEs. Use it to balance acpi_pm_freeze() wherever necessary. In addition to that use acpi_ec_resume_transactions_early() to unblock EC transactions as early as reasonably possible during resume. Also unblock EC transactions in acpi_hibernation_finish() and in the analogous suspend routine to make sure that the EC transactions are enabled in all error paths. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=14668 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', ↵Len Brown
'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
2010-03-08ACPI / EC / PM: Close race between EC and resume from hibernationRafael J. Wysocki
There is a race between resume from hibernation and the EC driver that may result in restoring the hibernation image in the middle of an EC transaction in progress, which in turn may lead to unpredictable behavior of the platform. To remove that race condition, add a helpers for suspending and resuming EC transactions in a safe way to be executed by the ACPI platform hibernate pre-restore and restore cleanup callbacks. http://bugzilla.kernel.org/show_bug.cgi?id=14668 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-02-22PCI / ACPI / PM: Platform support for PCI PME wake-upRafael J. Wysocki
Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-22ACPI: processor: call _PDC earlyAlex Chiang
We discovered that at least one machine (HP Envy), methods in the DSDT attempt to call external methods defined in a dynamically loaded SSDT. Unfortunately, the DSDT methods we are trying to call are part of the EC initialization, which happens very early, and the the dynamic SSDT is only loaded when a processor _PDC method runs much later. This results in namespace lookup errors for the (as of yet) undefined methods. Since Windows doesn't have any issues with this machine, we take it as a hint that they must be evaluating _PDC much earlier than we are. Thus, the proper thing for Linux to do should be to match the Windows implementation more closely. Provide a mechanism to call _PDC before we enable the EC. Doing so loads the dynamic tables, and allows the EC to be enabled correctly. The ACPI processor driver will still evaluate _PDC in its .add() method to cover the hotplug case. Resolves: http://bugzilla.kernel.org/show_bug.cgi?id=14824 Cc: ming.m.lin@intel.com Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_wakeup_device_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_wakeup_device_init() directly. Previously, acpi_wakeup_device_init() was a late_initcall (sequence 7). acpi_wakeup_device_init() depends on acpi_wakeup_device_list, which is populated when ACPI devices are enumerated by acpi_init() -> acpi_scan_init(). Using late_initcall is certainly enough to make sure acpi_wakeup_device_list is populated, but it is more than necessary. We can just as easily call acpi_wakeup_device_init() directly from acpi_init(), which avoids the initcall magic. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_sleep_proc_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_sleep_proc_init() directly. Previously, acpi_sleep_proc_init() was a late_initcall (sequence 7), apparently to make sure that the /proc hierarchy already exists: 2003/02/13 12:38:03-06:00 mochel acpi sleep: demote sleep proc file creation. - Make acpi_sleep_proc_init() a late_initcall(), and not called from acpi_sleep_init(). This guarantees that the acpi proc hierarchy is at least there when we create the dang file. This should no longer be an issue because acpi_bus_init() (called early in acpi_init()) creates acpi_root_dir (/proc/acpi). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call init_acpi_device_notify() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call init_acpi_device_notify() directly. Previously, init_acpi_device_notify() was an arch_initcall (sequence 3), so it was called before acpi_init() (a subsys_initcall at sequence 4). init_acpi_device_notify() sets the platform_notify and platform_notify_remove function pointers. These pointers are not used until acpi_init() enumerates ACPI devices in this path: acpi_init() acpi_scan_init() acpi_bus_scan() acpi_add_single_object() acpi_device_register() device_add() <use platform_notify> So it is sufficient to have acpi_init() call init_acpi_device_notify() directly before it enumerates devices. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_debug_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_debug_init() directly. Previously, both were subsys_initcalls. acpi_debug_init() must happen after acpi_init(), and it's better to call it explicitly rather than rely on link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_system_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_system_init() directly. Previously, both were subsys_initcalls. acpi_system_init() must happen after acpi_init(), and it's better to call it explicitly rather than rely on link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_power_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_power_init() directly. Previously, both were subsys_initcalls. acpi_power_init() must happen after acpi_init(), and it's better to call it explicitly rather than rely on link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_ec_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_ec_init() directly. Previously, both were subsys_initcalls. acpi_ec_init() must happen after acpi_init(), and it's better to call it explicitly rather than rely on link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: call acpi_scan_init() explicitly rather than as initcallBjorn Helgaas
This patch makes acpi_init() call acpi_scan_init() directly. Previously, both acpi_init() and acpi_scan_init() were subsys_initcalls, and acpi_init() was called first based on the link order from the makefile (bus.o before scan.o). acpi_scan_init() registers the ACPI bus type, creates the root device, and enumerates fixed-feature and namespace devices. All of this must be done after acpi_init(), and it's better to call acpi_scan_init() explicitly rather than rely on the link ordering. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17ACPI: move private declarations to internal.hBjorn Helgaas
A number of things that shouldn't be exposed outside the ACPI core were declared in include/acpi/acpi_drivers.h, where anybody can see them. This patch moves those declarations to a new "internal.h" inside drivers/acpi. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>